Adobe Premiere ACA Video Communication Exam?

Has anyone taken the entry level exam? I can do everything in the exam with ease, but missed the cut by two questions and have been having problems finding anything of value to use as a suitable guide. The exam prep materials on from Adobe aren't helpful. Anyone with thoughts or suggestions, that would be great.
Thanks

Welcome to the forum.
As your system setup will likely be much different from that of Konrad's, I would start a new thread, and in it, list the full system in detail, as Konrad did. This ARTICLE will give you tips on the info that would be very useful.
In Konrad's case, the C:\ was filled to about capacity, so could well have been a contributing factor. That is why full I/O specs. will be very, very useful.
Good luck,
Hunt

Similar Messages

Adobe Premiere Pro Video editing layer disappeared

I was working with Adobe Premiere Pro and then the video editing layer disappeared, it left me with Audio editing layer tho.

Try dragging down this line:

Adobe Premiere 8 - videos directly to YouTube more than 10minutes

Adobe Premiere 8 doesn't allow me to share videos directly to YouTube bigger than 10 minutes. How I reset this to allow videos up to 15 minutes according to the new YouTube file sizes.

Welcome to the forum.
In the short form of the answer, no.
However, you can Export/Share, and then use your extended account to upload whatever your account allows. When PrE 8, and even PrE 9, were being coded, the limit was 10 mins. period. The extended/advanced accounts are fairly new. Perhaps PrE 10 will allow for longer files to be directly uploaded, but we will not know until about late September. By its release, YouTube might offer unlimited Duration, and PrE 10 will have been written for what existed, when it was engineered.
Good luck, and sorry for the bad news. Still, that Export/Share and then Upload has worked for most users with the bigger accounts.
Hunt

Adobe Premiere Pro Video Play Issue

This is probably not an advanced question, but I'm having a lot of trouble finding an answer. I'm trying to use Adobe Premiere, and I'm importing my video. In the first screen, the top left video play area that I import my raw video into, I find that I'm getting a very choppy play. The choppy play is making it difficult for me to time my cuts. The screen image will freeze while the audio continues to play.
When this happened initially, I assumed it was my hardware. I was running what I considered to be a decent machine, but I figured I needed a better one. So, I went and bought a better one. Now I'm running a machine with a Quadro 3100 graphics card. It's an I7, quad core, about 2.8 ghz if I recall correctly. (It's supposed to be able to over clock or boost or something, but I don't know much about that stuff.)
Anyway. Is there some sort of setting I should be using? Any advice would be really, sincerely appreciated.

John T. Smith,
My apologies for not having provided more information.
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
I'm using Adobe Premiere Pro 5.5, and I believe I just updated it to the 5.5.2.
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
I ran the update this morning, which is why I believe I'm using the 5.5.2.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7, and I believe it is Professional.
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
These are Quicktime .mov files. I'm afraid I don't have a lot of other information. They are files that were transferred to my computer, but I wasn't around when they were initially done.
If you are getting error message(s), what is the full text of the error message(s)?
No error message.
What were you doing when the problem occurred?
The problem is consistent.
Has this ever worked before?
I've never seen it play smoothly.
What other software are you running?
Just typical Microsoft Office programs, and Chrome, and maybe Explorer. But I rarely run anything else while I'm attempting to work in Premiere.
Do you have any third-party effects or codecs installed?
To my knowledge, no.
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
I'm using the MSI WT Series WT60 2OK 3K-615US 15.6-Inch Laptop (Black)
Are you using Mercury Playback Engine GPU Acceleration?
I do not know how to use this.
Does the problem only happen with your final output, with previews, or both?
It only happens to the raw footage and timeline footage. The output is fine, assuming I can find the correct place to make the cuts.

Adobe premiere cs6 video out haisy through blackmajic decklink card

Adobe premiere cs 6 video out haisy through blackmajic decklink card in Mac OS X Lion (10.8)

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, there is a CS6 Bug using "spanned" AVCHD files, but so far I am only filming in short segments (under 4 Gig per file) so do not have the problem described in http://forums.adobe.com/thread/1004369?tstart=0
Finally, make sure you copy from camera to hard drive according to http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

Multi-colored block noise bug in Adobe Premiere - DV video

When I edit a DV video in Premiere 6.5 sometimes the final DV video output will have this strange multi-colored blocks that last a frame or two, and it will have a loud violent hiss right there. It's not in the original DV video, and it won't be in the same place if I resave it. I can't figure out what's causing it. I blured the logo in the bottom left corner, but it's fine. It will look perfect with the video screwed up behind it. Anyone have any ideas what's happening, or have you run into this before??

Anything that does that "once in awhile" and "not in the same place" is most often caused by TSR software running in the backbround
That TSR software is doing "something" to the hardware that is stealing a few clock cycles or polling the system bus... and that causes problems with Premiere
You need to check what else is running in the background, and stop it if at all possible
Also, This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link

Adobe Premiere : Editing Video in Text

How do you edit video in text on Premiere Pro?
I did this in Adobe Element - both the newest versions (2014) using black video, Track Matte Key and inverting them with a Title, like so 15 seconds in
Real Talk Teaser: Sean White - YouTube
Now I've switched to Premiere Pro and am trying to replicate my titles, but to no avail. I can't get the text to cut out to transparent to reveal the moving video below
I've tried using a Set Matte,
tried using a Luma Key with Alpha Channels,
tried a Title with a black background fill,
or one without over black video,
inverting Mattes,
tried cutting/copying a clip of the video to place on Video 3 instead of just putting the Title over Video 1
and on all three Video channels ...
Tried Adobe/non-Adobe video tutorials and the Adobe reference.
I don't know what I'm missing. Thoughts?

Hi Tash B,
Here you go:
Create text and place it on the track above the video clip you want to show inside the text.
Apply a Travel Matte Key effect to the video clip.
In the Effects Control panel choose Matte > Video 2, Composite Using > Matte Alpha
Hope that helps,
Kevin

How to use itunes music into adobe premiere elemesnts video

I want to use my itunes music into a adobe video.
How can I transform the itunes music so I can use into the abode video?

Try to use instructions for consolidating library from here, see if that helps. At some point I have noticed, especially with huge library it gets hard for itunes to keep information about different locations, unless you have external drive plugged permanently.
http://support.apple.com/kb/PH1459
http://support.apple.com/kb/ht1449

Adobe Premiere 7 video turns blurry / pixilated upon export. How do I get a high quality export?

Hello. I am editing a video in Adobe Elements 7.0. The footage is standard definition. I am ready to export the video, but when I do this the video comes out blurry or pixilated looking. The footage looks clear when I am actually editing it, but when I export it something goes wrong. I need one export in Flash (which will later be posted on the web) and one export as a Windows Media File or MPEG so it can be viewed internally on our office computers. I have played with copious settings, formats, compressions, etc. How do I export non-blurry, high quality, clear videos?
Thank you so much for your time and consideration. I really appreciate it.

Hi Mr. Hunt! Thank you so much for responding. I really appreciate it.
What is my project preset? That's a great question. My settings are:
General:
Editing Mode: DV NTSC
Timebase: 29.97 frames per second
Video:
Frame Size: 720 horizontal x 480 vertical
Pixel Aspect Ratio: D1/DV NTSC (0.9)
Fields: lower field first
Display format: 30fps drop frame timecode
Title Safe Area: 20% horizontal and vertical
Action safe: 10% horizontal and vertical
Capture:
Capture Format: HDV Capture (Footage/tape is SD, camera is HD, does this impact anything?)
Video Rendering:
Maximum bit depth - box is NOT checked
Previews:
File Format: DV NTSC
Compressor: DV NTSC
Color Depth: millions of colors
Optimize stills - box IS checked
Footage is shot on a Canon XHA1 Hi-def camera, but on standard definition tapes. Footage is shot drop frame.
Does that answer your question? If not, where would I go to find my presets?
I'll have to check out MS Windows Media Encoder.

Help! My Adobe Premiere Elements Video is Horizontal, Can you help?

I took a video of a native dancer, Unfortunately, when played the native dancer is horizontal. is there a fix to rotate the video just as one can rotate a photo?

ceasefortea
In Premiere Elements 10 Windows
a. highlight your video on the Timeline of the Timeline view
b. click on Properties icon above Timeline to open Properties Palette. (Could also open Properties Palette via Window Menu/Properties)
c. In Properties Palette/Motion Panel Expanded, use the Rotation feature there to rotate your video.
Please let us know the outcome. We will fine tune the details as necessary, but I think that the above should do the job.
ATR

Adobe Premiere - blurred video when convertering from MOV to AVI

Hey!
When I exporting my video I made with my iphone (.MOV) to .AVI then the videos quality gets worse that it should be.
What does that depends on and what can I do to fix it?

What does that depends on and what can I do to fix it?
The phone. Don't use the phone to change the wrapper. Use a converter or better yet, use a video camera. Use a phone to make calls.

I need a Video Card for Adobe Premiere Elements, what is recommended?

I wish to buy the Adobe Premiere Elements Video Editing. I shoot on a Cannon GL1 & GL3 mini dvd and need a video card to capture my video footage. What Video Card is recommended for use with the Premieire Elements software? and what is the price? Please advise...

farney1946
Is the purchased Premiere Elements 12 still in its sealed packaging?
If you have not already, I would suggest that you install Premiere Elements 12 from the purchased installation disc
and evaluate its performance in your computer environment.
a. Does the program fail to install?
b. Do you get Display Card errors?
If you are worried about not being able to return 12 once the package is opened, then you can try the following
a. Download the Premiere Elements 12 tryout files from the following web site and evaluate it as a tryout (full
featured).
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Read and carry out carefully the Note: Very Important Instructions section on the web page to avoid Access Denied message.
b. If the tryout performs well for you, then delete the tryout and install your purchased version with the purchased
serial number included on the packaging.
....other possibilities, but just the above for now.
ATR

Flooring pictures in adobe premiere pro

For my company we need to make nice pictures for clients, where on the adobe website could you download the adobe premiere pro

Here:
Video editing software | Download free Adobe Premiere Pro CC trial

Adobe Premiere 8 Importing questions

Overall comparing to other editing software, Premiere 8 is perfect for me. However, I have an issue regarding importing .mts files.
I have been using this Emicsoft MTS Converter 4.0.06 and converted the files .AVI and WMV and both files open up in Windows media normally. But when I open the file in Adobe premiere, the video drags but the sound is fine.Can I convert these files through Premiere? Is there a better software I should be using?
I have a Dell Laptop with Windows XP and two external drives.

I do not have issues importing .mts directly into Premiere Elements 8 (Get Media/Files & Folders). If this is your situation, have you rendered the Premiere Elements 8 Timeline content by pressing the Enter Key of the computer main keyboard to get a better preview (video and audio wise)?
I have not imported directly from the MTS into Adobe 8. I used that converter program instead I have no idea how to do that through
premiere.
What is the source and video/audio codecs used in this original file with the file extension of .mts?
If you mean the source of the video itself, it is straight from the camera which is a Canon HF 200 from a 32 GB card.
I am using the trial version of Premiere 8. The program will arrive sometime this week.
As you can see I am pretty new at this so any help is greatly appreciated.

"Creato con prova di adobe premiere"

There's a way to remove/delete the words "free try adobe elements 12" in the video? This words always will stay in the video or when I complete the project they will not be? C'è un modo per eliminare la scritta "creato con prova di adobe premiere" dal video oppure c'è durante la progettazione ma quando si chiuderà il progetto scompare? Grazie

candysama
You can remove the Adobe watermark from the Premiere Elements tryout project file (project.prel) after you purchase the product.
Classically, you open the tryout project file in the purchased program, go to Timeline Menu and select Delete Rendered Files. For some, just opening the tryout project file in the purchased program automatically removes the Adobe watermark.
You cannot remove the Adobe watermark from any exports from the tryout (file saved to computer hard drive or burn to disc), even after the purchase of the program.
Please review and let us know if you have any questions on this or need clarification.
Thank you.
ATR

Adobe Premiere ACA Video Communication Exam?

Similar Messages

Maybe you are looking for