Adobe Premiere CC 2014 will not load

Adobe Premiere CC 2014 will not load.
Been with tech support for HOURS, reloaded several times.
On Windows 7 with 64 bit computer. NVIDIA 3-D graphics card (plenty of ram, etc)
It has NEVER worked.
Any suggestions?
Mel Wayne

Hi,
Did you try to reinstall Adobe Muse? is it happening with all the muse files like with new sites, or for any particular file?

Similar Messages

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?" I click Yes and it begins to process again for a few minutes. Then it displays the following Invalid Unicode file error message...and simply stops processing or installing. In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
Thanks for your interest in helping!
b
Bob Horton, MS
972-786-6445
[email protected]
www.rshorton.com

Adobe Premiere Elements 13, will not display video picture, audio only. My video format is listed as compatible with Adobe.

Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.

douglass
On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
If not, please do so.
You have not given us enough information with which to help you.
What are the properties of your source file that is presenting in the project with audio but no video?
Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
file extension
pixel aspect ratio
What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
the file?
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
administrator?
Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
Thanks.
ATR

Adobe premiere Elements 12 will not open editor

I had Adobe Premiere Elements 11 on my laptop and worked fine. Decided to upgrade to Elements 12 and did but version 12 will not open editor, says sign in, I sign in but no editor. Organizer opens and loaded my Photos and videos. I purchased full retail version for download. My laptop runs windows 8.1 and has an Intel Core i5 dual core processor and 4GB ram.

actll
Have you gone to Computer/Manager/Event Viewer/Windows Logs/Applications and looked for error entries that appear to be associated with this problem?
Did you purchase Photoshop Elements 12 as well as Premiere Elements 12, and does Photoshop Elements 12 Full Editor open whereas Premiere Elements 12 will not open to its Expert or Quick workspaces?
You have probably tried it, but can you open to the Premiere Elements workspaces from the Elements Organizer workspace?
More later.
ATR

Adobe premiere 8.0 will not open on 10.9.4

on a new mac pro adobe CC premiere 8.0 will not open on 10.9.4 it will open on another pro running 10.9.2

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Adobe Audition 3.0 will not load recordings that are 8 hours long?

I have been taking day long recording sessions and wanting to review them from projects and notes. Someday these recordings can be over 8 hours in length and Audition will only load the first 2-3 hours of this. Does anyone else have this issue? How did you take care of this issue? I am just looking for any information. I have tried to record in both .WAV and .MP3 and it does the same thing. I would really like to be able to find a way to make this work. Thanks.

wesley_shook wrote:
I am actually not using it to record it live. I am trying to import files off of an Olympus voice recorder and then edit them into sections through Audition. The complete file will not load up. It will only show the first 3 hours of a recording and then not see the rest. But if I open the file in Windows Media Player it will play all 6-8 hours of the recording. Any ideas of why it will not open the complete file?
This is a slightly longer explanation of what ryclark wrote, and with probably the only solution that will work for you. I say probably, because I haven't ever needed to do this for myself. Others have reported that it works, and that's what I'm relying on here!
So, what format are you opening the file in in Windows Media Player? If you open the MP3 it won't have a problem, because the MP3 file is severely compressed. It's only when you expand it out and try to save (or open, even) it so that it looks like a wav file that you have the problems. Because of the wav file size limit, you can't have a single wav file at anything like a sensible sample rate that will last that long. This isn't an Audition limit, it's imposed by the maximum address size you can write to the file header.
The way around this is to import the file into Multitrack view, because this has the ability to split files and use the extra chunks in the broadcast wav specification to appear to open a much larger file. In reality it isn't though - it's just stitching together the several max length wav files that expanding the MP3 file out created. But you wouldn't be able to save this as a giant wav file, simply because of the addressing limitiations, which remain. What it should do though is let you extract sections from it, and open and subsequently save them in Edit view.

Premiere Elements 9 will not load workspace

Hi all,
I have had pre 9 on this computer for some time now and have just had an issue in the last month or so.
welcome screen loads as per normal and allows new project or open project to be selected.
once either of these is selected the workspace opens but is empty with no selector, timeline or preview.
the menu bar is at the top of the workspace, however only some of the selections in the drop down list can be clicked on, the est are greyed out.
the ones that can be clicked are the standard file menu and help menu and restore workspace.
the deactivate button cannot be selected nor can register or update. I am running the latest version.
i have the latest quictime and all drivers are up to date.
i am running windows 7 64 bit
as stated above, this program has run on this machine before, I have 4 gig of Ram and plenty of hard drive space (1.5 tb free)
Thanks

YNT-08
Thanks for the update.
The Adobe Premiere Elements Prefs file will continue to be regenerated.
A just in case note...Premiere Elements 9 should be run as the 9.0.1 Update which can be accessed via Help Menu/Updates (if that is available under the circumstances) or from an online download (do not even need Premiere Elements opened for doing)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Since you wrote "....updated to 9.03...", I thought that I had better ask in case that was not a typing matter.
Things to consider, rule in or out....
a. Double check to make sure that your video card driver is up to date according to the information at the web site of the manufacturer of the card.
b. A while back there were two Premiere Elements "strange looking" workspaces. We had them doing the video card driver update drill. What that turned out to be was the use of the High Contrast Themes in Windows 7. As I recall, a switch to Basic took care of the issue for both. Any chance that could be involved in your case?
Please review the above and let us know if any of it had impact on your present situation.
Thanks again for the follow up.
ATR

Premiere Elements 12 will not load

I cannot get Adobe Premiere Elements 12 to load. I am running Windows 7 64bit. It has opened before, but it will not launch at all. I have tried switching to just opening Elements directly and not going through the welcome screen. I have tried running as administrator. I have verified that I have the latest video driver from the manufacturer. I have also deleted the folder at C:\Users\Doug\AppData\Roaming\Adobe\Premiere Elements\12.0 as suggested in another post.

ATR,
I looked at the logs and nothing strikes me with any real information. It does have one error that says "The program PDApp.exe version 7.0.0.426 stopped interacting with Windows and was closed." So yes, there are some event logs, but I nothing that gives me an idea of what the problem is.
Here is another event error, perhaps it will mean something to you...
Fault bucket 0, type 5
Event Name: PCA2
Response: Not available
Cab Id: 0
Problem signature:
P1: Adobe Premiere Elements 12.exe
P2: 12.0.0.0
P3: Adobe Premiere Elements 12
P4: Adobe Premiere Elements
P5: Adobe Systems Incorporated
P6: 200
P7: -1
P8:
P9:
P10:
Attached files:
C:\Users\Doug\AppData\Local\Temp\{0329b1e0-d519-4fc4-b1d0-e95765fed0ab}\appcompat.txt
C:\Users\Doug\AppData\Local\Temp\TabADEB.tmp
These files may be available here:
C:\Users\Doug\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_Adobe Premiere E_dd29c8729c34bae6d27da9f18a1c18862f8f3c_0379192b
Analysis symbol:
Rechecking for solution: 0
Report Id: f6b9e48d-71d0-11e3-b819-1078d2f886ff
Report Status: 0
Yes, I have the latest version of Quicktime. (No, I had not previously verified that.)
I have not used this program for several weeks and I do not have a restore point that is older than a few days, so I doubt it would do any good to roll back. Plus, I did install several windows updates today to bring everything up to date, including the video driver. I performed the windows updates after I began trying to solve this PrE12 issue, so I doubt they are the problem.
I have not attempted to uninstall the program yet. Am I to that point already? Also, I am not familiar with "ccleaner."

Premiere Elements 8 will not load a saved project

When attempting to open a saved prel the Elements states 100% loaded but the program becomes non responsive. Window 7 system. It will not open a large portion of the auto saved files. Everything was normal until 8:30.
Any ideas?
Thanks in advance for your help

Hello, 2481Russell. Premiere Elements has its own forum and you'll usually get better help with PRE questions there:
http://forums.adobe.com/community/premiere_elements
Good luck!

Link for Adobe Premiere Elements 11 will not work. Any help please?

I bought my Premiere Elements package from another seller which gave me a link to download from Adobe. The product key thing is legit but every time I click on the file link for windows, my laptop comes up with this message: "The file archive of Adobe Premiere Elements 11 is missing. You need all parts in the same folder in order to extract Adpbe Premiere Elements 11. Please download all parts."
What does this mean??? Can anyone help me??? Please!

it means you only download of the 2 needed files. there are files 1 of 2, and 2 of 2. you need both. try again.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe premiere elements 12 will not open keeps crashing

I am on a mac using osX 10.8.5 and my program will not open. It just keeps crashing. i have tried shutting down my computer several times but it will not work. The Organizer seems to to work but not the Video editor and it shuts down when i click "new project" any ideas anyone?
i'm on version 12

Hi Jacquima,
Welcome to Adobe Forums.
It seems like Premiere Elements 12 is not activated properly.
Please open the finder window and click on go and choose computer.
Navigate to the below path then
MacHD>Library>Application support>Adobe
Rename the files SLstore and Slcache to Slstore.old and Slcache.old respectively.
Launch Premiere elements 12 again it will prompt you to enter your Adobe id and password and then the serial number.
By following the above steps you will have to reactivate your Adobe products. Make sure you have no other Adobe product.
If you have any other adobe product installed make sure you have the serial number for that.
Thanks

Adobe After Effects CS4 will not load to Snow Leopard

Recently My hard drive crashed. I reloaded Snow Leopard on my computer and all of my support applications.
I attempted to load Adobe After Effects CS4, but it would not load.
I read where others had problems back in 2009.
Is there a fix for this problem?

Mmh, something is leaking. Are there any other Adobe products on the system that use MPEG CoDecs (Premiere, Encore, Adobe Media Encoder). If so, my best guess would be that those are not installed correctly or were messed up during an update or so. That stuff is shared by all apps and while your system is not ideal, it certainly should work and not give this error. Depending on what is going on, only a full re-install of everything might fix it, though, unfortunate as it may be. So make friends with the CS3 and CS4 Clean Scripts from the support pages, set aside a good afternoon and take some deep breaths...
Mylenium

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Adobe Premiere Elemens 9 will not start

Hello,
My system is Windows 7.
When I want to open a new, or want to start an existing project the programm will not start en I recieve this message:
I have uninstalled Premiere Elements 9 and after that installed it again.
But the message mentioned here above still appears.
Then I used the Premiere Elements exe file but still the same.
When I use the help file a message appears that says there is an update available.:
I click on "download now" but after a short moment appears "download failed"
Error nr. 16822
Who can give me a good advise.
Thanks very much

ad hessels
Is Premiere Elements 9 a new program for you - has it worked before but not now or has it never been used and/or worked before? It appears that you are trying to run the program on Windows 7 (64 bit assumed).
Right now the only thing that you want to be downloading for Premiere Elements 9 is the 9.0.1 Update. You can do that without Premiere Elements 9 opened with the following download from Adobe via this link
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
If you could get into the program, then you could do this update via a project's Help Menu/Update.
1. Do you have the latest version of QuickTime installed on your computer?
2. Are you running the program from a User Account with Administrative Privileges and also Run As Administrator applied?
3. What video card/graphics card does you computer use and is it up to date according to the web site of the manufacturer of the card?
Does your computer use 1 or 2 video card/graphics card?
4. Does the problem exist with and without the antivirus program disabled?
Several productive areas of troubleshooting that we may be exploring after more details are supplied include
1. Deactivation from within the program (if you can get into a project); uninstall the usual Control Panel route; ccleaner run through (regular and registry parts); reinstall with antivirus and firewalls disabled.
CCleaner - PC Optimization and Cleaning - Free Download
2. Deletion of the Adobe Premiere Elements Prefs file and/or the whole 9.0 Folder in which it exists.
3. Deletion of the BadDrivers.txt file.
Many of these ideas will require that you be using an active Folder Option for Show Hidden Files, Folders, and Drives.
4. Other
Please review and consider and then we can decide what next.
Thank you.
ATR

Adobe Premiere Pro Cs6 Will Not Open

I have an issue.
Essentially I began installing Adobe Premiere Pro, and it installed halfway before concluding it had allegedly finished installing all the updates.
This is not true as I cannot click the application in Creative Cloud, and my arrow remains as the standard cursor.
This is the second time this has happened, as I was forced to reinstall Creative Cloud and all of my Applications.
I thought a clean install would have helped the situation but it seems to have made no difference, there is no way to open this application, it merely says that it has been installed though is completely unusable.

What is your operating system?
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

Adobe Premiere CC 2014 will not load

Similar Messages

Maybe you are looking for