Adobe Premiere CC and Adobe Encore CS6

Hi friends
Perhaps I missed this information.
In my personal notebook I already use the CC design apps like Photoshop, Illustrator, InDesign.
My father works with video app and in his workstation he is still using CS6 applications, including Premiere, After Effects and Encore CS6. My father uses a lot the Adobe Dynamic link to easily wok with the video applications together.
Now he is thinking about installing the CC apps in his computer. Question is:
Since CC does not include Encore...if we keep Encore CS6 in the machine and the other programs as the new CC version..Will Adobe Dynamic Link be broken??? And we cannot use anylonger?
Thank you very much for the help
Gustavo.

Gustavo Del Vechio wrote:
Will Adobe Dynamic Link be broken??? And we cannot use anylonger?
Hi Gustavo,
Yes, the Adobe Dynamic Link isn't supported with Premiere CC.
There are some posts here in the forum that described this issues.
Take a look here: http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
Regards
Axel

Similar Messages

Sharing files between Adobe Premiere Elements and Adobe Photoshop Elements

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WS72D069B5-1663-44a9-BB4E-8182DB2EE6C6. html

msnexplorer
I suspect that this latest set of details is clouding the way to success.
Typically we would be looking at integrated Photoshop Elements and Premiere Elements set. I thought that we were working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1 which would considered an integrated set.
Let approach this from a different angle.
Have you any idea what version of Premiere Elements your project.prel came from? Reflecting back, the concept of integrated combos of Photoshop Elements and Premiere Elements did not appear until the combo of Photoshop Elements 5 and Premiere Elements 3.0/3.0.2. Along with that came the perk of the Premiere Elements' Break Apart Elements Organizer Slideshow to do just that for the slideshow that it received from the Photoshop Elements side.
Unless you have additional details that would support us getting to the goal, I think that the path of least resistance might be:
a. if you can open the project.prel in question in Premiere Elements 10, then do so.
b. After you have the slideshow on the Timeline, then use the Split Clip (Scissors Tool) to cut the slideshow at the spots where you want to insert additional pictures. You may have to add back transitions and such.
The Break Apart Elements Organizer Slideshow would have been perfect for you to make your edits of the slideshow in Premiere Elements. But that command is only available in Premiere Elements under certain condition:
a. You must be dealing with integrated combos of the programs, example, 5/3, 6/4, 7/7, 8/8, 9/9, 10/10, 11/11. There are a few loopholes in all that but I do not see them helping us at this time.
b. You would have had to Output the Photoshop Elements to Premiere Elements with the Photoshop Elements Slideshow Editor "Send to Premiere Elements or Edit with Premiere Elements Editor".
Bottom line: if your task is going to involve more than the version 8 combo, then I think it best to try to open the project.prel that you have and break it apart yourself with the Split Clip Tool of Premiere Elements.
And, did you say if this project.prel does open in Premiere Elements 10 without any missing media (Media Offline) messages?
We will be watching for further information and developments. Please let me know if I have misinterpreted any of your information.
Thanks.
ATR

Adobe Premiere CS5 and Open Directory users - Premiere fails to start

We have several class rooms with desktops that are configured for Open Directory.
When a student logs in he's actually working in his home folder on the server and his user is also managed by the server.
This works fine for all the applications that we're using except for Adobe Premiere CS5 and Adobe After Effects CS5. Whenever a student tries to start one of them the application will hang and only a force quit can stop it. It is impossible to start these applications.
However, it is possible to use Premiere and After Effects using a local standard on the desktops. But I don't want to go that route. I want the managed users to be able to use those applications.
Has anyone found a solution for this?
Are you able to use this applications in a same environment?
I've played a lot with the permissions on the library, system and Adobe folders, but the problem doesn't seem to be related to them.
Setup:
AFP Server: Xserve intel running Mac OS X Server 10.6.5
OD Servers: Mac Mini Servers running Mac OS X Server 10.6.5
Clients: iMacs intel running Mac OS X 10.6.6

Safe Mode disables a lot of drivers and services, like networking. That would seem to indicate that something is running on your system that interferes somehow.
I'm just not sure how you'd go about tracking that down.

Need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC)

I need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC). Thanks for any advice

You will probably need a PC version of Premiere Pro newer than CS3 in order to open the file, and then save it again as the newer version. From there you could possibly open that new version in CS6 on the Mac.

How do i find a serial number for adobe photoshop elements and adobe premiere that i purchased in a store?

i have bought adobe photoshop elements and adobe premiere elements in a bundle pack from a store and i cant find a serial code on the box that works so if someone could help me with that, that would be great!

Hi Michael,
Please refer the following help article on Find your serial number quickly
Hope this helps.
Please let us know in case of any problem.
Thanks and Regards,
Sumit Singh

Adobe Premiere Elements and Photoshop Elements 10

I purchased a hard copy of Adobe Premiere Elements and Photoshop Elements 10 and recently got a new computer and i cannot find the 1st install cd. how can I download version 10 on my computer without the cd?

Try http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Follow the Very Important Instructions on that page first otherwise the download links won't work.

Background Task on Adobe Photoshop Elements and Adobe Premiere Elements Organizer "hangs"

I recently upgraded my software from Elements 10 to Elements 12 and had a bit of trouble. Apparently both 10 and 12 have a way of launching an executable in the background which tends to get "stuck" on my system. I believe the problem may be related to the network configuration and software mix I live with, but I need to confirm my suspecions and find a way to control the problem. Here is what I know... I have always experienced a lot of problems using Elements with my NAS device which is a 1TB usb 2.0 connected disk system attached to my Linksys E3000 Router. When I got the router, the BIOS software did not correctly support NTFS file systems, but subsequent updates eventually made this possible if you formatted the removable drive on a system in NTFS, you could then hang it on the router and "see" the contents, serve them via Windows Media Player, or iTunes, etc., etc. from a computer atteched to the network, or via wirless directly off the router. I archived all my photos out on this file system and have successfully indexed it for use with Adobe Photoshop Elements and Adobe Premiere Elements Organizer, but... When I went to install Elements 12 software I tried to install it without first removing Elements 10, and on a system which had run Elements 10 since the last full reoboot. During the install of 12 under "shared services install" the installation process "Hung" on a background task with a name like "AdobeElementsAnalyzer.exe" which only shows up in Windows 7 task manager as a running process, not as a full program, but because the file was locked by the system, the install hung. I eventually figured out that I needed to start the install of Elements 12 software immediately after having rebooted so that this program was not present in the background, and succeeded in completing an install of Elements 12 on my Windows 7 X64 system. This system required a "special" software download for Premiere Elements, but not for Photoshop Elements which is only apparently avaliable under 32bit emulation mode. I finally got the "shared components" portion of the X64 Premiere Elements to complete an install, and then set about verifying the onversion/upgrade of the indexes to my photos and video stored out on the NAS. The same rogue task which prevented me from doing the install showed up agian, taking all the system resources away from my dual processor Intel chip and refusing to let go. I was forced to terminate it from the task manager. I strongly suspect that my "issues" are in part due to the extrordinary network latency imposed by the drive connection I'm using to index my photos and videos, and I'm looking for a better approach to using the editors against my master catalog of files, as well as figruing out just what I need to do to insure that all the files I have stored on the drive are accessible by the organizer when I need to pull a copy to work on.
A complication is that I have two "legacy" Windows XP systems on my network, a reasonably fast Windows Vista Business desktop, and the Windows 7 X64 processor system which is the most powerful system I have. The Windows file security enhancements to NTFS changed from XP, to Vista, to Windows 7, so files which get saved to the NAS disk inherit a variety of different levels of security under windows. I have occasionally gone to one of my old XP boxes and "wiped" the security settings by resetting everything via Windows XP. Because the NAS is so slow, this process can take several hours and must not be interrupted by attempts to do anything affecting the NAS by any of my other networked computers. To avoid problems with my photo archive, it makes sense to me to do all my editing on copies which have been extracted from the NAS archive and stored on the C: drive (boot drive) of my Win X64 system.
What I seriously need to know is this: When/If I define a "watched" portion of my file system, rather than taking the time to manually import every little change to my photo archives, can I expect the Photoshop Elements Organizer to work properly as long as everything stored on the NAS is stored via the same system which runs Elements with the same active "user" in control so that all the windows 7 file security settings putting stuff on the mapped NAS drive remain properly secured under Win 7 X64? Frankly I don't care if the files appear "read only" to every other system and identity on my network, but I do need to be able to "see" them. I have been able to view slide shows and movies stored on the NAS via both my networked iPad, my Apple TV, and using Samsung's funky android and Windows compatible software. Frankly, I doubt that Microsoft or Apple has full understanding and control of the environment where there is no host "server" other than the eprom based stuff my Linksys E3000 loads to emulate early Windows Media Management architecture, but I mange to get it to work as long as I don't try anything sophisticated with the file permissions. As a fall back, can I expect individual "imported" bits out on the NAS to remain stable if indexed and used only by the Elements Organizer running on my Win 7 X64 system?
I am seriously considering converting an old WinXP desktop into a UNIX box which could be configured as a "Server" for everything stored on the NAS and be done with my problems in return for the power required to run the server all the time so stuff is there when I need it. Any recommendations?
Message was edited by: [email protected]

Adobe hasn't said whether it officially supports PSE 7 on Windows 7. But reports are starting to trickle in that PSE 7 works fine on Windows 7 for most people, though a couple people have reported crashes. My PSE 7 seems to work fine, though I primarily use PSE 8 now. This is all very preliminary, and we'll learn more as more people post here.

Premiere Pro and Adobe Media Encoder running slow

Hello everyone,
I'm having trouble with CS4, which is running significantly slower than CS3 did on a older machine. The CS4 suite is installed on a Dell Precision M6400:
Windows Vista 64-Bit
Intel Core 2 Duo CPU T9400 @ 2.53 GHz
8 GB RAM
NVIDIA Quadro FX 2700M Graphics with 512MB dedicated memory
The OS is running on a 57.5 GB HD (C:) and the Adobe suite is installed on a 298 GB Solid State HD (D:), except for Adobe Media Encoder, which is installed on the C: drive.
My project has 4 15-16 minute sequences. The sequences are in DV NTSC, 29.97 fps, My scratch disks are set to a folder on the C: drive. Media Cache Files and the Media Cache Database points to a folder on the D: drive.
These are some of the problems I'm having:
- Premiere Pro CS4 generates peak files every time I open a project
- It then takes 3-5 minutes to render before I can preview a 16-minute sequence
- Adobe Media Encoder takes 5 hours to render a 16-minute sequence (as flv) that has been previously rendered
- AME takes 1 hour to render every 15 minute sequence that has never been rendered before
Are my settings affecting their performance? Is there any way to improve it? Thanks.
(Premiere Pro is the only app that is slow)

The data rate for replay is one thing, the data rate from disk to memory then from memory to CPU and back the other way are different matters and ought not to be confused. It is well-established that for a computer to edit AVCHD you need top end components, and note that I said there were three tasks to distinquish with increasing hardware requirements, namely merely replaying the video, specifying edits in the editor and then the rendering. It is commonly accepted by all the industry vendors that to do remotely commercial AVCHD rendering you need a minimum Quadcore CPU then that eats data fast, in order to not let it go to waste you need a fast motherboard bus fast memory and in order for none of those to go to waste you need the fastest disk set-up you can manage. I in fact have a 4-disk RAID0 volume using SATA (I think the disk model is SATAII but I have to await return from the repair center before I can confirm). For this RAID0 volume I have run speed test software from BlackMagic because I have one of their HDTV capture cards. It recorded that this volume which remember is doing parallelised IO is just fast enough to receive a encoded HDTV stream from the BlackMagic card but too slow to receive an uncompressed HDTV stream, indeed when I tried both I found the volume did keep up with compressed but fell behind with uncompressed. Remember that with a RAID0 volume of 4 SATAII disks a given file gets spread over the four disks and hence IO is spread over those 4 3G/s data lanes. Also remember with these disks 3G/s is just a burst speed, for AVCHD we are interested in sustained serial IO which is much less.
Before my machine broke down, I found that it took 5 hours to render 33 minutes of HDTV albeit as it went along it transcoded from AVCHD to a Microsoft HD format for Vista-only. Another interesting thing is that I found that the longer this render ran the slower it became, the estimated time started at 3 hours but the actual was five and the last one third took maybe 3 hours. Because the machine broke after that run I couldn't figure the bottleneck. For my machine bear in mind that at the repair shop we found that the Quadcore had only half the necessary electrical power plugged in, the monitor software showed however that it constantly ran around 90% of whatever capacity that reduced power supply permitted. Now then we can puzzle over why it got slower and slower and yet CPU consumption remained consistent and near to full capacity, memory was not the bottleneck because that was constant at 6.4G. But you can say that this was maybe performing like a Dualcore and was hitting some sort of wall, if you had a 1 hour render with that rate of degeneration of performance factored in what would happen to the render time, and for 3 hours you could be running indefinitely. I hope when the machine comes back the correct power supply will make it behave like a Quadcore should for this type of application. Anyway I have two theories for the degradation. First is just that PrProCS4 was getting its knickers in a twist and thereby just doing more computation per minute of video to be rendered as time went by, maybe internal resource management related to OO-type programming maybe, or related to disk IO falling behind, both these theories have problems, for the latter the CPU usage should then have dropped also.
Anyways, you need really a Quadcore system and blazing fast disk to work fully with AVCHD commercially, we found an external SATAII disk so if I were you I would just go get one and move on with your life.
Message du 03/06/09 16:08
De : "Jim Simon"
A : "JONES Peter"
Copie à :
Objet : Premiere Pro and Adobe Media Encoder running slow
For AVCHD you MUST have FAST disks.
AVCHD actually has a lower data date than DV. You need lots of CPU muscle, but disk speed is really not a factor specific to AVCHD. Anything that works for DV will work just as well for AVCHD (and HDV as well).
>

I have Adobe Premiere Elements and it will not let me export?

I have Adobe Premiere Elements and it will not let me export? It also will not let me login. It says photoshop.com is temporarily unaivalable and to check my network settings. Error 400. Can anyone help me? I need to export this video as soon as possible.

You don't say which version of Premiere Elements you're using, but Photoshop.com was discontinued last year, so you won't be able to log into it.
As for exporting -- it's hard to give you specific information without knowing which version of the software you're using and on what operating system but -- which Share or Publish & Share option are you using and what is happening when you use it?

I did install Adobe Premiere 11 and I cannot get it open, error 126

I have Windows 8 Pro / 64 bit
I did install to day:
Adobe Photoshop 11 and
Adobe Premiere Elements 11
When trying to open (load) Adobe Premiere Elements 11 video editing
there is an error
ERROR
LoadLibrary with error 126
Specified part cannot be found
I had same problem with Adobe 8 and same now with Adobe 11
What to do
or do I return product back, refunding money?
(I did buy it to day)
Greetings
kari

Hei,
First: Thank you:
I succeed, finally, after few uninstalling/ installing driver and software
/Adobe Pre 11: in differennt order:
AMD/Ati monitor driver run to dating new correct one did not help,
( I had Win7/64 running (pure install with all software), Win8/64 changed
plenty drivers to "her" own General Drivers (Microsoft), what is wrong!!!! )
so I delete monitor driver twice!! First delete did not help, so I delete
again all and run hard disk defrag, re delete driver and forced system to
load AMD/Ati win8 driver and reboot and re install Adobe Premiere 11 again
and after that, now call for error 126, so software works also in video
part.
Thank you help
even my explain may not be so clear, but now ok
(Must say, anyway, plenty "rabbish" is in Windows8 now in, when looking in,
but too sensitive to delete similarities away, when the order of
similarities (what is a last one) is not clear and it is not same order
with Windows in different installations)
Now
AsusTek informs for 3 year old motherboard, no win8 correction coming,
suggest to delete softwares, in question, huh huh.
It seems Win8 is also now working properly like when I open from Start
window Worktable, appears an error AsusSetup does not support this
operating system: WNT_6.2P_64_MCE
So:
Windows 8 Pro /64 and
Adobe and
Asus
are still far from pre-co-opertion for a client
Thank you Adibo, now, first time I did get a proper assistance for software
problem
kari
2012/12/12 Bill Hunt <[email protected]>
Re: I did install Adobe Premiere 11 and I cannot get it open, error
126
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in *Premiere
Elements* - View the full discussion<http://forums.adobe.com/message/4915366#4915366

Adobe Download Assistant, and Adobe Ilustrator CS6

Please remove this program from this computer. It downloaded (taking up a lot of time), and now I find it can not help me make the conversion I'm after, and it's stuck on my computer- it won't remove or uninstall.
Don't ask me to go to FAQ because it won't SOLVE the problem.
You have the technology to download it so, so now take it back!
I'll try your products on a new computer.
Mel1nda

Dear Mr. Wright,
I appreciate your concern. But again, please wipe out anything about me on your database. To make a long story short, my patience endured through telephone conversation with an agent (for which I waited about one full hour.)
The chats also failed to address my problem.
You have the technology to resolve the issue of Adobe Assistant, and the Adobe Illustrator. It just became a dead and wasted presence on my computer.
Next, I know when I should visit the FAQ. I don't need to do that.
I appreciate your E-mail, but to me it seems that sloppy organization is a result of poor inter-department communication.
A good chunk of your revenue comes from little people like me. I'm not oversimplifying the matter; you do have the resources to trouble-shoot. But from what I had experienced, too many of your agents were ill-equipped to advise; and when they do make the effort, they tell me what I already know, or I get cut off when trying to pull out the ID number of that transaction.
I might try it again when my new computer arrives, or- I will not do business with Shutterstock anymore.
With all due respects,
Melinda de los Santos
Date: Sat, 9 Jun 2012 12:18:37 -0600
From: [email protected]
To: <removed by moderator>
Subject: Re: Adobe Download Assistant, and Adobe Ilustrator CS6 Adobe Download Assistant, and Adobe Ilustrator CS6
Re: Adobe Download Assistant, and Adobe Ilustrator CS6
created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Mel1nda this a public forum so you may not always receive an immediate response through this support channel. Which operating system are you using? This will allow myself or another forum member to provide you with the appropriate directions to remove the software.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Adobe Download Assistant, and Adobe Ilustrator CS6
To unsubscribe from this thread, please visit the message page at Re: Adobe Download Assistant, and Adobe Ilustrator CS6. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers

Adobe has announced the new Cloud-based model for software distribution, along with new terms for boxed product upgrade eligibility. Beginning with the CS6 releases, when they happen, upgrade pricing on boxed products will only be availble one generation back. There is a limited window to upgrade now to the current versions at a discount.
See http://blogs.adobe.com/conversations/2011/11/adobe-creative-cloud-and-adobe-creative-suite -new-choices-for-customers.html

Eugene:
Based on the current information we have (from the blog post), which may not be correct and which you should not rely upon:
There is some confusion about the word "discount." As used in the blog post, in general there are no "discounts" for upgrades, there is the upgrade price and there is full price. But, also in the blog post, there is a special "discount upgrade" if you choose to upgrade to CS5.5 today (prior to Dec. 31, 2011), which is 20% off the regular upgrade. However, Peter used the word "discount" to distinguish between upgrade pricing and full price. It's probably a good idea to avoid using that word there because of the potential for confusion.
I have CS5 InDesign in work. So I will be able to upgrade that to CS6 when it comes out at the discount price?
You will be able to upgrade to CS6 at upgrade pricing. Not the 20% discount, but it is "discounted" from the full price of CS6.
I'm still using CS2 Illustrator and Photoshop, for the little work I do in those programs, they're fine. But if I want to upgrade them to CS6 I have to pay the full amount of an upgrade, with no discount... or will I have to pay for CS6 in full for both of these programs?
You will have to pay the full price (not the "full amount of an upgrade," whatever that means).
If you elect to upgrade to CS5.5 prior to Dec. 31 of this year, however, then then you can pay the discounted upgrade price to upgrade to CS5.5 (well, CS5 since Photoshop CS5.5 doesn't exist), and then you can pay the CS6 upgrade price in March/April. So you can pay for no upgrades (full price) or two upgrades (one of which is 20% off).
At the moment I can upgrade CS2, photoshop and Illustrator for €240 each, to CS5. So wouldn't I just be able to do that now and then buy the CS6 upgrade at a much later date perhaps just before CS7 comes out?
Yes, you can do that.
If CS6 has the tools to basically go "File>Export>Epub" and I get a fully working epub file without having to trash about in code afterwards or make complex tagging in InDesign, then I'll be buying it.
It looks like EPUB is evolving pretty fast, so even if ID CS6 fully supports what you want out of EPUB on Day 1, I bet you'll need to be prepared to postprocess it on Day 2. Or at least long before Day 200.

I have Adobe Acrobat Proffesional and Adobe Reeader. When ever I open a document it closes on its own in about 10 seconds. How do I fix this?

I have Adobe Acrobat Proffesional and Adobe Reeader. When ever I open a document it closes on its own in about 10 seconds. How do I fix this?

Windows 7.
Adobe Acrobat 8 with the Original DVD.
Adobe Reader X1 downloaded off Adobes site.
Both versions of adobe close after 10 seconds or so once I open a PDF file. I started having this problem about 2 weeks ago. Everything else if fine with the computer
I have run various virus scans. Haven’t found any issue.
Regards,
Dave

I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together?

I'm going to update my current set up. I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together? What would be the best way to go about this upgrade?

Bridge comes with Photoshop but not with Elements.

I just installed adobe creative cloud and Adobe Bridge.

I just installed adobe creative cloud and Adobe Bridge. When I try to open a image in camera raw I get an error "Bridges parent application is not active" "Bridge requires that a qualifying product has been launched atleast once to enable this feature"

Have you opened Photoshop? (I think that is a "parent" application)

Adobe Premiere CC and Adobe Encore CS6

Similar Messages

Maybe you are looking for