Adobe Premiere CS4 Problem

hello..
i have installed adobe premier cs4 pro and it is working correctly, but i have problem about program monitor when i add video to timeline and plays on program monitor it is playing very slow and video is lagging and not working smoothly, please help me in this regard i will appriciate you thank you i'll wait for reply..........

>recorded my video which is .avi
Is that from a tape camera which you captured using Firewire, or some other process?
If some other process, what are the video details?
Wrapper Codec & Format, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
Win8 64bit with only 2gig of ram is barely enough to run Windows, with almost nothing left to run software
I agree with the other comment... it is surprising you can even load CS4

Similar Messages

Adobe Premiere CS4 Projekte archivieren.

Hilfe- ich verzweifle: Ich arbeite mit Adobe Premiere CS4 (Windows). Grosse Probleme habe ich einzig beim Archivieren fertiger Projekte. Kann mir da jemand helfen? Ich lege meine Projekte so an, dass sämtliche Footage-Dateien (AVI,MFX.JPF,WAV,MP3, verbundene Aftereffects-Kompositionen etc.) im selben Stammverzeichnis (mit mehreren Unterverzeichnissen) sind. Wenn ich nun die Festplatte mit dem entsprechenden Projekt an einen anderen Computer anschliesse und das Premiere-Projekt wieder öffnen möchte, findet Premiere die Footage-Dateien nicht mehr. In stundenlanger Handarbeit muss ich die dann jede einzelne Footagedatei wieder zuordnen (Medien verbinden). Das kanns doch nicht sein!!! Was mache ich falsch? Wo zum Teufel speichert Premiere die Dateizuordnungen ab? Das Löschen der Common-Cachedateien führt übrigens auch nicht zum gewünschten Resultat. Mit der Funktion "Projektmanager" komme ich auch nicht weiter, da dann verbundene Aftereffects-Kompositionen und MXF-Filmdateien (von meiner EX1) NICHT archiviert werden, d.h. die fehlen dann im Projekt. Ich habe sämtliche möglichen Einstellungen durchprobiert. Es funzt nicht!!! Also-hier nochmals meine einfache Frage in Kurzform: Wie kann man komplexe Premiere-Projekte archivieren, um sie später auf einem anderen Computer (auf welchem die CS4 Suite installiert ist) wieder problemlos zu öffnen.

Christoph,
Glad to see your English is good, because it makes for a broader audience for your questions.
It is a make or break condition that drive letter and directory structure are absolutely identical on both systems.
Let us know if that helped.

Odd, Green video in Adobe Premiere CS4?

Hi! This has been happening to me a lot lately, and I really need a fix!
When editing my projects, I will have imported a lot of video files.
Before dragging those files into my timeline, I like to preview them.
However, sometimes, the video does not play. The sound does, but all I see in the preview are random frames from other video files that I have imported. (Ex. Say I preview a video of a dog barking, which works. Then, I try to watch a video of a cat meowing. I hear the cat perfectly, but random frames from the dog video are all I see in the preview area.)
Random videos also turn green when previewd. I will not be able to hear them, like last time, but the whole frame is green and I will not be able to see them. On the timeline they are black.
I usually solve this problem by restarting, but I have to get this project done!
I recently imported a WAV file and an mp3 file into my project. ***The video files are in MP4 video format.
OS: Windows 7 64-Bit Home Premium
Processor: Intel(R) Core(TM)2 Quad CPU    Q8400 @ 2.66GHz (4 CPUs), ~2.7Ghz
Memory: 6142MB RAM
Card name: ATI Radeon HD 4650
Everything is on my C:/ Drive.

Hi Everyone,
Thanks so much for the initial response to my question - I really appreciate it! Everyone in this forum is EXTREMELY helpful, and I hope I can find a solution. I have taken your advice and am currently going through all of the troubleshooting stages listed in the above, but, have not yet had any luck thus far. I figured I would post here, while I continue to troubleshoot on my end.
Specific Problem:
I have several .mp4 video files in my project timeline that I captured via a Hauppauge HD PVR capture card. When I load the project, only some of the videos do not load properly. The thumbnail photos for the videos that don't load properly are simply green, and when I play it, only the audio from the clip properly plays. The video is either just a green screen, or it is a black screen with random still images from OTHER video files I have in the timeline. When I restart the computer, and re-open the project, the affected video files are different every time. I have about 40 or so different clips in this project, and the ones that seem to get affected by this problem are the ones that are last to load.
Also, once the project is loaded, and I see that some of my video files are affected by this problem, the computer seems to really lag, and Premiere Pro has trouble operating. Premiere Pro often gets the (Program Not Responding) message, and I have to force close it, and restart my computer, to ensure a fresh start.
Also, when this PP is having its problems, my whole computer slows down. I have a widget on the desktop that shows CPU and RAM usage. When PP is having its problems, the RAM meter goes up to 95 - 100%.
What I've Learned So Far:
I downloaded and ran the Sherlock Codec Detector and the Gspot Codec program, and have determined that my computer is missing the following codecs:
Broken Codecs
"MainConcept (Adobe2) AAC Decoder"
     FileName       = "C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\ad2daac.ax"
"MainConcept (Adobe2) H.264/AVC Decoder"
     FileName       = "C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\ad2dsh264.ax"
"MainConcept (Adobe2) H.264/AVC Video Encoder"
     FileName       = "C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\ad2evh264.ax"
"MainConcept (Adobe2) MPEG Audio Encoder"
     FileName       = "C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\ad2mceampeg.ax"
"MainConcept (Adobe2) MPEG Video Encoder"
     FileName       = "C:\Program Files (x86)\Adobe\Adobe Premiere Pro CS4\ad2mcevmpeg.ax"
When I click on each of the codecs, I get the following error message: "The driver file for this codec was not found. This probably means the codec was not unistalled properly".
In Gspot, I have similar results, and it says the file is missing for these codecs.
Do you guys think this is the problem? If so, would it be a simple fix as to just download the codecs I am missing?
My System Info:
Codecs - avc1
Name: H.264/MPEG-4 AVC
Status: Codec Status Undetermined (what does this mean)
Premiere Pro
Version number - CS4 version 4.2.1
Installation language - English
Updates applied - Not sure
Project/sequence settings - XDCAM EX > 1080i > XDCAM EX 1080i 60i (HQ)
Operating System
Name - Windows 7 Professional
Update/patch level - ??
Installed language - Enlgish
Display resolution and color depth. - 1920 x 1080, not sure on color depth
CPU type and speed - Intel(R) Core(TM)2 Quad CPU    Q8400 @2.66GHz    2.67GHz
Amount of memory (RAM) - 6.00 GB
Video card
Manufacturer - NVIDIA
Model - GeForce GT 330M
Driver version - 8.16.11.8959 (3/15/2010)
Number of monitors (displays) in use - 1
Audio card
Manufacturer - Realtek
Model - Realtek High Definition Audio
Driver version - 6.0.1.6005 (12/16/2009)
Each hard drive's capacity and space remaining
301 GB free of 455GB
No partitiaons
EVERYTHING is on the C drive - OS / Project / Media
Hardware capture device
Manufacturer - Hauppauge
Model - HD PVR
Driver version number - 1.5.6.1
Capture
software
Name - ArcSoft
Company - TotalMedia Extreme
Version - Copyright 2007?
No Error Messages
The video files I am using are all .mp4 files that were obtained from the capture card, that were originally puleld from a DirecTV HD DVR satellite receiver. From Gspot, one of the video's information is as follows:
3gp4: 3GPP Media (.3GP) Release 4
- isom: MP4 Base Media v1 [IS0 14496-12:2003]
Recommended Display Size: 1920 x 1080
Created: 2011 Apr 05   11:54:37
Modified: 2011 Apr 05   11:54:37
Thank you all in advance for your suggestions. Please let me know if I can provide any other information.

Need help with Vietnamese Text in Adobe Premiere CS4

I just switch from PC to Mac and using Adobe CS4 to edit. Most of my client required Vietnamese Text for their wedding movies. On PC is very easy to type vietnamese text right on Adobe Premiere titles but in Mac is not. Anyone knows how to type vietnamese text in Premiere on Mac Please help. Thanks very much

Try resetting your preferences.
Easiest way I know is just delete the entire Preferences folder. Make sure PP and AME are both closed.
If you have workspaces you want to save - not have to rebuild - then drag the entire Prefs folder out of Program Files.
When you restart PP it will build a new prefs folder. You can then - one by one - import the saved workspaces from your old Prefs folder (and whatever else you want).

Elements 8.0 and Adobe Bridge CS4 problem

I have two problems that appeared in Elemens 8.0 and Adobe Brigde CS4 recently. I'm using the Mac version and a Macbook Pro (4 months old).
I don't really know where to address the problem, but I hope someone in this forum would be able to advice me.
Problem 1
When I browse a RAW-file in Bridge and click the photo to view a 100% zoom and then go back to a normal view, after a few seconds the photo turns alot darker. I've got alot of macro photos of flower and they really loose structure in this process and I would say they get damaged.
On the attached file the left photo is the photo I've viewed and closed and the right one is the original file. Does anyone have an explanation to this problem? I do like to review my files and do a 100% zoom before I choose the best one, but this is not possible in Bridge due to this problem.
Problem 2
After postprocessing my photos in Elements some of them cannot be viewed through Brigde anymore, they get sort of unclear and some show pixels. If I use Finder or other programmes to view the files they look perfectly allright. See examples below, the left one is a screendump from Bridge and the second one is the processed file.

I think this solved the problem, at least some of it.
I deleted the bridge plist file and also ran an update of Bridge CS4. I wasn't sure how to update ACR in bridge, so I didn't do that.
But when I start Bridge now, only some of the files changes color slightly in the thumbnails view. The zoom (loading 100%) also looks different, it zoomed to 800% earlier even though it said 100%, it sort of never ended.
Thank you Barbara, I'm ever so grateful. Now I know where to go if I have more problems

Adobe Photoshop CS4 Problem

I have a Dell Pc, Windows Vista Ultimate, 4 Gb of Ram.
I just install Adobe Photoshop CS4 and i got this problem "When i open a new document, the new document show with lines on it,i can;t works with those line "black lines: i don't, if it's configuration problem of the software or something else. Please help me!!
if you need more information, please let me know.
Thank you

Hi Mylenium
The document is based on default preset, i have a 256MB ATI Radeon X1300PRO and a Screen Resolution 1280x1024.
Check those links, about the document.
http://www.flickr.com/photos/folsomcs/3038732605/#preview
Here is the performance settings
http://www.flickr.com/photos/folsomcs/3039586798/#preview
Thank you Very Much

Flash SSD for Adobe Premiere Pro - problem, or not?

Hi,
I've just ordered a new workstation specifically for Adobe Premiere Pro use.
Then I saw this on Adobe's technical requirements page for PP:
10GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
It honestly never occurred to me that a modern RAM-based hard drive might cause a problem for specific software, does anyone know if this is true and if so why?
It's not too late for me to re-spec a 15'000rpm drive instead but it seems a bit daft.
Thanks in advance
Alastair

True enough but like tweaking the bios changing windows swap files (evinronmental varibles actually) etc is not the average users typical tweak!
SSD is far faster than any SCSI.
the SSD is less money that SCSI (have to buy a controller)
Sata is pretty much the same spped as SCSI other than seek time.
SCSI is dead! i have not seen scsi drives for sale from any of my vendors in about 2 yrs now. SAS yes. but again pointless.
and the onboard sas controllers are not so hot.
not to mention having your OS on SSD does make everything snappier. even without the adobe temp files.
Scott
ADK

Adobe Premiere Tech Problems

Mid project editing a short film when the video files werent visible to edit. Saved my project and closed the program. When I went to re-open Adobe Premiere nothing happens. There is no error message just nothing. ADobe Cloud Desktop told me there was an update for the program. So i allowed the update to be installed. But still there is nothing, my Adobe Premiere doesnt open and still no error messages.

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Such as... Windows or Mac and computer details might help someone help you

Adobe captivate cs4 : problem about multiple choice

Hello,
I use adobe captivate cs4 for E-learning.
when I use multiple choice in my quize, this choice is drop to under line.
but look quiz in this program. it's normal.
It's appear when I publish only!!
(EX.pic)
Help me please and thx for your answer

I publish is .exe file

Premiere CS4 problems with Snow Leopard 10.6.7

I know that this is draging the depths of history but we have eight MackBook Pros with Snow Leopard (no roll back possible) and various CS4 progeams on in the college at which I teach. We have a problem with Premiere in that clips will not play either in the preview, timeline or program areas rendering the whole program useless. I don't think this is a problem that unknown; has anyone found a solution othere than installing 5.5 of course?

That is not good... PPro requires FULL access to the system to work properly... it just is not designed to be run on a limited use account
Also (Mac may be different???) to use some of the functions in Encore in the Win7 world, you not only have to be running the program from an Administrator account, you actually have to right click the program icon and select Run as Administrator from the list of options
Welcome to the wonderful world of computer security settings that get in the way of doing work
To create a dual layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0

Various Premiere CS4 problems on Windows 7

My job is to edit weekly videos for a college. They've provided me with a Windows 7 computer and Adobe CS4. My source material comes from shared servers. For the past few months, everything worked smoothly. In the past couple of weeks, I've had various problems with Premiere that aren't consistent.
1. Sometimes the playback and controls begin to lag just before the program crashes.
2. Sometimes audio clips from one source will suddenly be mute on playback, even though the waveform on those clips is displayed. This also keeps exports from being successful (the log says "Error Compiling Movie - Unknown error").
3. Sometimes jpegs or png files I have superimposed can't be found when I open the project file, resulting in the "Media Offline" box in their place.
4. Even when none of the above is happening, exporting the video as an AVI results in choppy audio that then cuts out when it reaches the clips mentioned in 2.
Help please? As I said, not all of these issues consistently happen, but at least one is always there.
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz 2.33 GHz
Memory: 4GB RAM (3.87GB usable)
Card: ATI Radeon HD 2400 XT

More reading...
Win Server is NOT supported http://forums.adobe.com/thread/851602
Not in a Network environment http://forums.adobe.com/thread/771151
-and not on a "domain" http://forums.adobe.com/thread/858977

What is the best system for editing HD in Adobe Premiere CS4?

I’m a Portuguese video enthusiast since the linear editing times. I’ve been reading this forum from some days with special interest, cause I want to build a new HD workstation.
My video productions are with AVCHD material and Adobe CS4 Master Collection. My old workstation – good enough for DV and HDV material – can’t now efficiently handle the original footage and editing work.
So, I plan to build a totally new workstation, probably with the following components:
– Board: ASUS P6T Deluxe V2
– CPU: Core i7 975 (3,33 Ghz) Extreme
– RAM: triple channel 12Gb 2000Mhz OCZ Blade series
– VGA: Nvidia Quadro CX 1,5Gb DDR3
– Storage: 4 x Seagate Barracuda ES.2 500Gb 7200 3Gb/s
– Optical: Plextor BD-R/RE reader/writer
– Power supply: Corsair HX1000
– Case: Antec Twelve Hundred
– OS: Windows Vista Ultimate 64bits
Any suggestions? Any changes needed/recommended? Any money spent for nothing?
Another question: how do I configure the 4 Barracuda ES.2? My idea is 2-500Gb drives splited into a Raid 1 array for the OS+Apps and a Raid 0 array for page file and media cache and the other 2-500Gb drives in a Raid 1 array to store the original footage. I never have more than 2 hours of video to edit, so I don’t need lots of space for the original footage.
Is it better 2 1Tb disks instead of the 4 500Gb? Do I need the RAID arrays? These are the points where I have more doubts.
I will appreciate some opinions and recommendations.
Thanks a ton!

You may have a look at this:
How to get the best from a PC
From the looks of it, budget is not so much a problem. However I would not opt for the i7-975, but for a simple 17-920 overclocked to 3.6 GHz. With the money saved from that move alone you can get an Areca ARC-1680iX-12 raid controller with 2 GB cache for some more disks. I would not choose Seagates, but either the cheap Samsung Spinpoint F1 or the WD Caviar Black disks. With current prices I would only choose 1 TB disks, but would not go for less than 4 disks for the video part, and a separate WD Velociraptor as boot disk for OS and programs.
OCZ Blade 2000 MHz is a waste of money. 1600 DDR3 is quite enough and a lot cheaper. As stated in one of the guides linked to above, it makes more sense to get memory with the lowest CAS at the normal FSB frequency than to pay extra for higher frequency at the detriment of CAS.
I include an overview of my system, maybe it gives you some ideas on components.
Hope this helps.

Drag and drop to Adobe Illustrator CS4 problem

Hi! It's about one week that I've got a problem with drag & drop images (and also other files) in Illustrator.
The problem is persistent for every kind of file and also when i drga&drop from Adobe Bridge i've got the same problem.
Please, someone has an idea about "why"?
There's in Illustrator an option or a setting that I can verify to solve this question?
Thank you in advance!

Ok, thank you:
- SO: Windows Vista (last Service pack / update)
- Ai CS4 rel. 14.0.0
- all file types... i.e. : if I drag&drop a .jpg file from desktop to AI... nothing! Also when I D&D an image from Bridge... All others programs work perfectly.
That's all... I've also verified parameters & C. and search on the web for a solution, but I've found nothing of relevant...

Adobe Premiere CS4 vs. MacBook Pro

Hi,
my problem : preview video is not playing smoothly. Sometimes it's playing good, but than it starts again: just stops for few seconds, the video is not fluent. There is no other problem, working with effects, audio working good, rendering, saving, everything is perfect. No other programs running, restarted computer.
This problem was seen only on Premiere, every other programs are working normally.
Please help... Lea

Lea,
Unfortunately, you posted to the Premiere forum. This was a program that was the precursor to PrPro. THIS is the correct forum. Maybe the MOD's will move this out to the PrPro forum, so you'll get more comments, than here.
Now, tell us about your I/O sub-system, i.e. your HDD's, their size, speed, free space, controller type and how you have them allocated.
My rough guess would be that your I/O sub-system is not up to the playback, but could well be wrong. With all but AVCHD material, the I/O sub-system is the most important aspect for playback. With AVCHD, it's CPU power first, and then I/O.
Good luck,
Hunt

Premiere CS4, problems after exporting

So I just finished exporting/rendering the clip I made. And I have a slight problem with it's output, which happens to be darker than the original wherever I had slowed down the speed of parts in the clips. So now everything that is the same speed as the original is exactly as the original which is good, and everything I've changed the speed on is darker than the original, which isn't good. (I'm assuming that speeding up a part has the same effect, though I haven't tried.)
I figured it did that with slowing down clips before because I did a tryout with some 1080p material. I blamed myself on that vid because I was tired and figured I probably knocked some wrong button but it turns out that it's happening with this video again.
Not that I probably don't have myself to blame anyway because I'm not that video-savvy.
Extra info; 1280*720p 59.94fps is the original footage, exported it into the exact same 1280*720p 59.94fps. From .mov to .mov as well. Quality should be the exact same as before.

I should probably add that I use two computers. One is a crumby laptop that I use for the internet, which I am using now, and the other is the computer that I described in my first post, which is for work. My work computer is never connected to the internet unless it needs to be to install something. So, I don't have any AV or firewall to slow things down. The only programs I have installed that run in the background are the "ATI Catalyst Control Center," for my video card, and the "Emu Patch Mix DSP Services," for my sound card. They both use minimal memory.
I have two drives:
Western Digital 150 GB with 120 GB still free: This drive has all of my applications installed on it, including Windows XP SP2.
Seagate 300 GB with 120 GB still free: This drive is strictly for storage. There are no programs installed on it.
Thanks for responding!

Adobe Premiere CS4 Problem

Similar Messages

Maybe you are looking for