Adobe Premiere Element 10 keeps disappearing

I have read a similar story to mine, but I still am slightly puzzled. I have uninstalled and then reinstalled this program... Still doesn't work. Is 4.5 giga-bytes enough? I heard from another that they bought a new video card, what is that? My memory is on my local disk (C). Please give me some pointers.

Yes, the video (and audio) driver is VERY important to getting PrE to load, and to also run. It relies more heavily on, and interfaces with the video driver, much more than almost any program on a computer, short maybe of extreme gaming, CAD and real 3D work. Most general computer programs can get by with an outdated video driver, and the user will never see a problem - until they crank up a program, like PrE, PrPro, a CAD program, or many of the current games, especially those with advanced graphics.
Now, PrE also creates quite a few "working files," and if there is not adequate HDD real estate for those, the program can crash, or hang.
Many recommend 20 - 40GB's of defragmented free-space just for those working files, but being an old engineer, I like a bigger "safety factor," and recommend 30 -60GB's of defragmented free-space. Also, and especially with limited RAM, Windows needs free space for its Virtual Memory/Page File. This can bring programs to their knees, as well. Personally, with my video-editing machines, I like to first setup a Page File that is about 2.5x my installed RAM (size is less important with a 64-bit OS and much more RAM), that is statically managed, i.e. I set the size. I do this before I install ANY programs, other than the OS. The reason for this is that I want that Page File created on the HDD at bootup near the edge of the platters for fastest access, and also in the same exact spot, each time that I boot up. After I have setup that Page File, I then begin installing programs, and using the computer.
If one leaves the default Page File management setting - Dynamically Managed, as Windows anticipates the usage/size, if one does not have enough free-space, Windows can crash. When starting a program, like PrE, Windows will know that it will need a pretty large Page File, and might get into trouble. Also, the dynamic management takes time, plus CPU cycles, as Windows must try and calculate the size on the fly. Still, HDD real estate can come into play.
Last, there is the performance of the HDD. At about 70% of capacity, performance goes down. The closer to capacity, the more the performance degrades. Also, as capacity is reached, the chance of a catastrophic failure increases.
Good luck,
Hunt

Similar Messages

  • My Adobe Premiere Elements 12 keeps crashing

    My adobe Premiere Elements keeps crashing no matter what I do. This message then appears and after I relaunch the program, everything I have completed it deleted or anything I have done before the crash, regardless if I have saved it or not, is deleted.

    >Display is an NVIDIA Quadro 2000M
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    While rare, it sometimes DOES happen that a newer driver has problems and you MAY need to go back to an earlier version nVidia driver

  • Cant open Adobe Premiere Element 10...keeps disappearing!!!

    I just installed Adobe Premiere Elements... I cant get the program to open up... It starts to open then it disappears... I tried to open it up many times with no luck...My computer is an HP Desktop-
    Intel Dual Core 3.4 GHz, 2GB Ram, 80 GB HD.... If anyone knows how to get this program to work, any help would be appreciated...!?

    You haven't said if you've purchased the program or if you're just using the trial. But here's one fix to try.
    http://forums.adobe.com/thread/542377
    If that doesn't work -- well, you've got a very small hard drive for editing video. How much of that is free space?
    You'll need a good 20-30 gigs of free, clean, defragmented space to even open this program.

  • I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

    I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

    dplum12
    What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
    For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    and, if you get any messages about Internet connect and the computer clock, please review the following
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    Please let us know the outcome.
    Thank you.
    ATR

  • Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
    HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    Molnar are you receiving that error during the download or install process?  Also which operating system are you using?

  • I have downloaded Adobe Photoshop digitally but when i activated adobe I keep getting this error message Adobe Premiere Elements.exe - NO DISK. There is no disk in the drive. Please insert a disk into drive/device/harddisk/dr1

    I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1

    It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
    If you meant Adobe Photoshop Elements, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content
    If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I was recently given Adobe Premiere Elements 9, it keeps saying the serial number on the box is invalid. What can I do?

    I was recently given Adobe Premiere Elements 9 from a friend who no longer uses it and knew I was interested in it. but when it comes to installing it, it keeps saying the serial number on the box is invalid. What can I do?
    I have tried entering it all different ways. I'm not dumb I know which one is the serial number this isn't my first Adobe product. Any help would be welcomed.

    Error "The serial number is not valid for this product" | Creative Suite

  • We tried to install Adobe Premiere Element and it keeps saying the E drive is empty.

    Adobe Premiere Elements 13.1 keeps saying the E drive is empty.  We got around it by changing the name to another letter.  Why did it do this?

    ireneo
    Please explain your question a bit further. Is the following your scenario?
    1. You installed Adobe Premiere Elements 13 (on what computer operating system?) Assumed from installation disc and to the default location on the Local Drive C.
    2. You are inserting your installation disc into the burner tray, the burner being the E drive? And, you get a message about empty E drive instead of the AutoPlay for
    you to click on to start the installation path?
    There is a known problem with Premiere Elements 13/13.1 where installation of this version generates a No Disc error. The fix for that is deleting or disabling the OldFilm.AEX
    file in the path
    Program Files
    Adobe
    Adobe Premiere Elements 13
    Plug-ins
    Common
    NewBlue
    and in the NewBlue Folder is the OldFilm.AEX file that you delete or disable by renaming it from OldFilm.AEX to OldFilm.AEXOLD.
    What type of Blu-ray DVD burner or DVD/CD burner was involved in this situation - internal or external?
    ATR

  • Adobe Premiere Elements 7.0 keeps crashing

    hey I have been editing my video for a while now but for some reason now cant even click pause without crashing I dont no what I have done but please dont say i have to do it all over again. says adobe premiere Elements.exe has stopped working.
    one more thing I rendered the video and it still works like a 1980s video camera its shocking. I had to convert them to avi because its one of those video cameras that record it on the mini dvd. please help with that thanks
    please help thanks
    Thank you

    With more information about your computer hardware and how you converted the video you're editing, it's impossible to help you, Mitchell. Also, you really haven't given us much to work with except that the program doesn't work.
    It might be best to contact Adobe Tech Support. They'll be able to ask the necessary questions and walk you through some troubleshooting.
    http://www.adobeforums.com/webx/.3bbe7d56

  • Adobe Premiere Elements 8 keeps crashing...need IMMEDIATE help?

    I have re-installed multiple times, had our companies IT department re-install the video card and do multiple clean installs to no avail. Any and all help woild be much appreciated.

    All,
    Computer specs are as follows: Intel(R) Core(TM) i72960XM CPU @ 2.70GHz    2.70 GHz, Installed memory (RAM) 16.0 GB, 64-bit Operation System, OS - WIndows 7
    Windows Updates and Drivers are automatically downloaded to all employees here at my company. The latest nVidia graphics card update was installed yesterday.
    Adobe Premiere Elements 8 has been working up until yesterday morning. I was working on a project and the applicaion crashed and has not recovered.
    I had all video files loaded to the project, and was about 90% done with the edit. I have been using APE 8 for years now without a hiccup.
    Camera specs: Canon HD Vixia HG20, the APE8 project setting are: NTSC-DV- Standard 48kHz. I downloaded the APE8 8.0.1 update that was listed on the opening splash screen.
    I can launch the application, it's when I load any project, it starts to lag, then crashes. I wish i could make heads or tails of this crash report I downloaded, then I might be able to fully understand what is happening.
    J

  • Adobe Premiere Elements 0.9 project crash, HELP!

    This is the first time I am using these forums, so I hope I posted this in the right sektions.
    I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
    In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
    I have also read through and tried some things from this Help/Troubleshoot page:
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
    I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
    This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
    The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
    I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
    In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
    Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
    In either cases, I need help with this. Please, help!

    Thanks so much for your reply, Steve!
    Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
    The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
    The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
    You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
    My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project  which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
    The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
    The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
    The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
    And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
    Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
    Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/

  • Adobe Premiere elements 11

    So...
    My Adobe Premiere elements 11 stopt working today...
    Last time a used was yesturday and then it workt fine but now it keep saying "an incompatible graphics driver has been identified. If you want a faster and better playback performance update date you graftikdrivrutinen.
    Information about grakifdrivrutin: ATI Technologics Inc. - AMD Radeon R7 200 Series 3.0.12618 Compatibility Profile Context 13.251.9001.1001"
    And when the program starts my PC freeze.
    And i have updated my AMD Radeon R7 as it says but same answer. And on my version of the AMD Radeon R7 is 13.251.9001.1001 and there is no more update for it but it was a update as it says but not anymore because i updated it to it.
    Please help me =/
    ====================================================
    Moved from Premiere Pro forum to Premiere Elements.

    Display driver & Baddriver http://forums.adobe.com/thread/1370916?tstart=0

  • Adobe Premiere Elements 11 file saving

    I have installed Adobe Premiere Elements 11 onto my C drive.
    When I edit video files I know they are large so that is why I save them to my  D drive that is very large.
    Even though I save my video files and finished files to my D drive Files are still being saved as well to my C drive. IT IS EATING UP ALL MY SPACE ON MY C DRIVE AND I DO NOT KNOW WHAT TO DO

    Major Paul,
    Welcome to the forum.
    I agree with Steve 100%. Much of what you are likely seeing on your C:\ are the Scratch Disks for Premiere, which are "working files." One has the option of where to locate those, in Edit>Preferences, and if you take Steve's advice of creating your Projects on your D:\ to begin with, then I would adjust the destination of all of the Scratch Disks to "Same as Project," and they will then reside on D:\, below the Project's folder in the hierarchy.
    Also, there is a recent thread on Scratch Disks (though the discussion does include Photoshop's Scratch Disks, which are different) here: http://forums.adobe.com/thread/1156141?tstart=0
    As Steve also suggests, keeping one's C:\ as clean, as is possible is a very good thing, and I could not agree more.
    Good luck,
    Hunt

  • Adobe Premiere Elements 11 memory

    Adobe Premiere Elements 11 keeps saying my momory is ful when it isn't.  What can I do?

    "Memory" can be seen in several error messages, and for different reasons. It can be installed RAM, or it can be Windows Virtual Memory/Page File.
    Let's start with some information first:
    What OS version are you running PrE 12 on?
    What are the full specs. of your computer, and especially the installed RAM.
    What are your Virtual Memory (Page File) settings, if you are on Windows/PC, and how is the Page File managed?
    What are you doing, when you get this error message?
    Good luck, and let us know a bit more please.
    Hunt

  • Adobe Premiere Elements 11 Editor: how to get support when you purchase at Apple Store?

    [Moving to Premiere Elements... JTS]
    I purchased Adobe Premiere Elements 11 Editor software at Apple Store in May/11/2013.
    I could use the product no more than 2 times because it started to have problems to open, since then I could not use anymore. In December, when I was trying to use the software again, I couldn't and started to call Apple and Adobe to try to solve my problems.
    Apple Support advise me to uninstall my Operational System (@Mavericks) and to install back the older version @Mac_OS_X_Lion_10.7. I did that and Adobe didn't work again. IT downloaded to my computer, but it couldn't be opened. As you can see the print screens below.
    After many tries going back and force to Adobe and Apple and now that the software is no longer available in Apple Store I am not sure why, I did not even had chance to try to reinstall and Apple said that they can't do anything. Also Adobe says that I can't get any help besides these forums because I have no Serial Number to provide (Apple never provided me this number).
    Anyone had a similar situation like mine? I would appreciate to have some help on this.

    Hi ATR,
    Thank you very much for your contact. This is the first person from both companies so far who tries to really help me.
    As follows are your answers, I would appreciate if I could get some help with that matter.
    SERIAL NUMBER FOR MY PRODUCT: The only document I have is the Invoice from Apple/iTunes Store (image below) for my Adobe Premiere Elements 11 Editor purchase, which I believe makes Apple responsible for my product as well. However, last time I talked to Apple, the advisor who spoke to me said that Apple could not do anything else, since the product was no longer available in their Store. Neversthless, Apple never provided me the serial number for the product, which I bought from Apple Store and downloaded directly to my computer. On the other side, all the times I called Adobe, the representatives could not attend me because I don't have the serial number to provide to it.
    What is the present situation
    a. Do you have Premiere Elements 11 Editor installation files saved to your computer?
    Ans: It disappeared from Apple Store in my computer and from iTunes Store as well. However, the software was in my computer before as can be seen in the images below:
    b. Is Premiere Elements 11 Editor currently installed on your computer?
    Ans: It was installed in my computer when I bought it, and I did use it in 2 occasions. However, after I started to face the problem trying to open the software and use it, Apple advised me to change my Operational System from Mavericks to Mac OS X Lion 10.7 to be able to work with Adobe Premiere Elements 11, since it could be facing problems with Mavericks. After have installed Mac OS X Lion, I tried to install Adobe Premiere again, but now it is not even possible to do from the Apple Store.
    c. If you went to http://www.adobe.com, signed in there with your Adobe ID and Password, and went to My Products, do you see your Adobe Premiere Elements 11 Editor listed there and does it include the serial number?
    Ans: My Adobe ID doesn't show Adobe Premiere, so that's one more reason why I don't have the serial number for my product. The only document I have for it is the Apple Store invoice and through it I can't have other number besides the order # or invoice # from Apple.
    d. Miscellaneous...Did you ever have QuickTime installed on your computer with the Adobe Premiere Elements 11 Editor?...Are your computer preferences and privileges OK?...What is your current computer operating system?
    Ans: I used to have my Quick Time when I used Adobe Premiere in my computer. Since came back to Mac OS X Lion 10.7, many softwares were lost when the Operating System was changed.
    I hope I have provided enough information, but please let me know if you have any questions.
    Best,
    AnnelenaPorto

  • Adobe Premiere Elements 12 won't open

         I downloaded Adobe premiere elements 12 on my hp and it keeps telling me I need to log in and register, but once I do it looks like it is loading for a few seconds and then just exits. Please help me fix this problem

    TripleEinstein
    What is the computer operating system for your HP computer? And, since it is a HP computer, does it use more than one video card/graphics card.
    Premiere Elements has problems with that 2 card system. Please tell us the card situation as shown in Device Manager/Display Adapters.
    The usual drill
    1. Running computer from a User Account with Administrative Privileges and Run As Administrator applied to desktop icon?
    2. Latest version of QuickTime installed on computer with Premiere Elements?
    3. Did you install the program to the default, Drive C location?
    4. Does the problem exist with and without antivirus and firewall(s) disabled?
    Even though you cannot open the Premiere Elements Editor, can you open the Elements Organizer?
    Let us start here and then decide what next.
    Thank you.
    ATR
    Add On...You may want to look at the following
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open

Maybe you are looking for