Adobe premiere elements 10.0 uses more than 100% cpu on macbook pro lion osx 10.7.3

Hello All,
We have a macbook pro 17" 2.66Ghz Core 2 Duo, 4GB DDR3 running lion osx 10.7.3.
When trying to run a video in adobe premiere elements 10.0, the video really lags. I checked the activity monitor and the cpu usage for the elements app process goes above 100%. Sometimes even 170%.
No wonder why its struggling to render the video.
Anyone noticed this issue too?
All suggestions welcome.
regards
Ankit

Hello OgelThorpe,
Thank you for the suggestion. I will try that soon. My macbook meets well over the hardware requirements for that package. Also only the cpu usage is high, i have 4GB ram and only 500-700 MB of that gets used by adobe premiere.
I have have run the hardware test in a loop and it passed everytime, so i dont doubt the hardware.
regards
Ankit

Similar Messages

  • Mail uses more than 120'%  CPU when fetching headers

    Hello,
    mail uses more than 100% CPU and the system response gets slow, affecting the other processes when mail starts, and the mail activity viewer says: fetching headers.
    It happens when I check my mail with mail client directly in the same server, or when I connect from another machine, my mail Version 2.1 (752/752.2), I have 3 IMAP accounts.
    I have verified and repaired the disk (no errors), I have set up mail from scratch, the first network connection is ethernet,
    I am using mail program on the server trying to check the mail in the same server. when I open the program, and it starts to fetch headers, the 100 % percent or more of CPU is used (128%,etc).
    when I try to conect from another mail program to this server the 100% cpu or more is get when fetching headers (I am using a firewire connection, and the another machine is a MAC PRO (4 processors, 2 x 2.66 GhZ Dual Core Intel Xeon, 1GB ram 667 mhz DDR2 fB/Dimm, MAC OSX 10.4.9, with no other programs running), so the problem is on the server.
    I have booted the machine in safe mode (the red text "safe mode" appeared), and the same things happened, I have some screen shots available
    from the mail forum they told me that I should check this problem in the server forum.
    http://discussions.apple.com/thread.jspa?threadID=957222&tstart=0
    any idea?
    thanks
    Alberto
    Dual 2 GHz PowerPC G5   Mac OS X (10.4.9)   4GB DDR SDRAM, MAC OS X Server

    Hello OgelThorpe,
    Thank you for the suggestion. I will try that soon. My macbook meets well over the hardware requirements for that package. Also only the cpu usage is high, i have 4GB ram and only 500-700 MB of that gets used by adobe premiere.
    I have have run the hardware test in a loop and it passed everytime, so i dont doubt the hardware.
    regards
    Ankit

  • Can I use the songs that come with adobe Premiere Elements for commercial use/film?

    Can I use the default songs that come with adobe Premiere Elements for commercial use; such as in a film?

    C. Raio
    We are not Adobe here. Rather user to user.
    In the threads that I have read here the following is the user to user reply on this matter that is seen regarding project assets....Music Scores in this case....
    The Music Score soundtracks are from the Adobe Premiere Elements (12 or 13) Music Score selections within the program.
    And, they can be used in the users choice of export. As for "authorship", I guess you would point to Adobe, Premiere Elements version, Music Score.
    Would the evaluators settle for the above information?
    ATR

  • Adobe 12 elements keeps asking my to sign in on my macbook pro? help

    adobe 12 elements keeps asking my to sign in on my macbook pro? help

    Hi Barbara
    Thanks for assisting  me with this
    i installed adobe elements on my mac desk top computer 10.8.5 no problem.
    i tried to install the software onto my mac book pro with mavericks
    the program just will not open i get a constant repeat request to
    register the product with adobe i have a ID
    i rang adobe and they could not come up with a reason other than maybe mavericks issue
    i will go to mac shop to day and see if they will put mountain lion back on my macbook pro
    apparently there are some issue with mavericks 
    thanks for you email cheers Phil

  • Adding more than 2Gb RAM to MacBook Pro

    Do you guys know of any way to put more than 2Gb RAM in an Intel 17" MacBook Pro?
    Model Name: MacBook Pro 17"
    Model Identifier: MacBookPro1,2
    Processor Name: Intel Core Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP12.0061.B03
    SMC Version: 1.5f10
    I bought this when the 17" models first came out, and have been disappointed in it ever since (I broke my rule of NOT buying the first generation of something). As time has passed, the main problem is the 2Gb limit for RAM. That's NOWHERE near enough, and shame on Apple for that limitation. If there were some way, even a non-standard way, of adding more RAM, I could get reasonable performance from this computer. As it is, this has been a wasted $3600 investment. whew!
    Any help or ideas would be appreciated. Thanks! Feel free to email bruce at dbsdesigngroup.com

    That's possible...actually likely. I'd love for that to be the case because I could fix it. ::Grin:: It's been this way since I first got it. When it arrived with just 1 Gb RAM, it was virtually unusable. I have a few apps as startup items, but they're just Firefox, Entourage, iNotepad, Linotype Font Explorer (with very few fonts activated), and Stickies. That shouldn't affect things much.
    My needs are to use Photoshop, Illustrator and GoLive at the same time, with MSWord, Firefox and Entourage open as well. After the first bit of usage, I end up with 4-6 pageouts and a VERY slow computer. While it's doing the pageouts (which take quite a while), or switching between apps, it's very slow. And it's also extremly slow when Spotlight is indexing, so I disabled that.
    I'm just not sure what it might be...nothing in Activity Monitor seems like it would be a culprit. Even in Safe Mode the problem is very evident.
    I'll keep exploring and hopefully find something that will make this machine more viable for my use. I really appreciate the input greatly.

  • No more than 2 USB for macbook Pro?

    Hey everyone,
    Isn't there a way to add/use more USB for mac pro? I have a Wacom, external Keyboard, Western Digital External harddrive and Ipod that i would like to use all at once.
    thanks all

    Fengjiatian wrote:
    powered? like plug to the wall?
    Yeah it's not just about how many devices can be powered, but also reliability. Some devices just don't work right if they are power starved, and some throw up low-power related error messages all the time if on a bus-powered hub. Wall power ensures that there's enough power for all connected devices and the hub too. I have a Keyspan 4-port that works great and a D-Link 7-port that was flaky as heck.
    Another option for you is an ExpressCard/34 that has more USB ports on it. You just slide it in your slot on the left side. Various manufacturers make them. I think they usually have two ports on them. If you want more ports, you'll still need to get a hub.

  • More than 1 display for macbook pro

    Is it possible, and if so how can you connect multiple(more than 1) displays to a new macbook pro 13"?
    It has to be able to run in bootcamp with windows aswell.

    Solution may be found if you search in the "More Like This" section over in the right column.

  • Using MBox 2 With GarageBand on MacBook Pro Lion 10.7.3

    Hi. This is my first Apple Support post. It was recommended that I post to this forum. I've been using my good old MBox 2 with GarageBand on my old MacBook without incident. Someone stole my laptop so I had to buy a new MacBook Pro the other day. On that system, GarageBand at first didn't recognize the MBox at all. A trip to the Genius Bar led to downloading a core audio driver. This enabled GarageBand to recognize the MBox 2 as an interface, and it records without much incident when the audio input/output settings remain on the DigiDesign MBox. HOWEVER, when I change the audio setting to the build-in output, all **** breaks loose. The selected signal bar starts registering a regular, loud, red-lining metalic beeping sound, and at this point the issue remains whether or not I change the audio setting back. They've tried several audio drivers at the Apple Store and nothing is working. Avid requires you to buy support codes, which is ridiculous, so any help on this forum would be extremely appreciated. Thank you!

    I have a m-audio fast track pro that I'm having a similar problem when using it with my new Macbook Air. I found changing it to 16 bit will work.
    I have a Apogee iMic that works fine so my guess is we will have to wait for Avid/M-Audio to update drivers.

  • Adobe Premiere elements 9 license used up upon format

    Hi there, i was provided a license and i used it in my old harddisk. When i got a new one, i didn't know i had to deactivate my license in Adobe PE9 and went ahead to format the old harddisk. I installed Adobe PE9 and now it says i have to deactive the remaining ones. I'm from Singapore and i can't seem to find any contact number to Adobe locally or at least an email. That's why i started a thread here. Please help anyone!

    BlueLaser you may want to look at our contact page at http://www.adobe.com/cn/support/contact/.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • Launching Adobe Premiere Elements 9 after using Firefox 3.6.13 causes PRE9 timeline to misfunction (go black).

    If Firefox has been run since machine booted then when running PRE9, moving a clip in the timeline results in the timeline region going black. When mouse released the selected track reappears, hovering mouse over vertical scroll bar area makes it visible, scrolling results in entire timeline to refresh.
    This could be a Java VM problem, as problem persists until machine rebooted. Closing Firefox does not clear problem.
    Replicating process using Open Office, another Java app does not cause a problem.

    If Firefox has been run since machine booted then when running PRE9, moving a clip in the timeline results in the timeline region going black. When mouse released the selected track reappears, hovering mouse over vertical scroll bar area makes it visible, scrolling results in entire timeline to refresh.
    This could be a Java VM problem, as problem persists until machine rebooted. Closing Firefox does not clear problem.
    Replicating process using Open Office, another Java app does not cause a problem.

  • Stumped with a MS-6135 Dual Slot2 Xeon. Can't use more than 1 CPU at a time!

    Hi.
    I have a MS-6135 board and I am not having much luck getting it to work.   Basically both windows and Linux both say that the Board itself is not dual capable and just 'see' one of the CPUs installed.   On linux, during the bootup on a 2.6.13 kernel with SMP support it says the board does not support SMP.  On windows, I downloaded sisoft sandra and it says that the board is not MP compatible.   This is the same if i have both in the board, or if i run one CPU and a terminator.   When i tried the terminator route, i did it twice, once with each CPU and it was able to boot fine with either. 
    The CPUs that I have are P3Xeon 500/512.   One of them is SL2XU and the other is SL3D9.  The steppings are different, but apparently they were both pulled from the same compaq server (I got them from ebay).  At first i was thinking that this might be my problem.  But when i run my other dual Xeon board (intell C440GX+) with a single CPU, linux clearly identifies it as dual capable, but just running a single CPU. 
    In all cases, the bootup screen identifies corretly what processors are installed.  So when they are both installed it says Xeon x2, and when only one it identifies as Xeon.   The hardware monitor also gives me a temperature for all installed CPUs.   Interestingly enough, so does lm_sensors in linux. 
    Some things i've tried:
     - All the different bios versions on the MSI website, including the v2.0 bios thats actually for the later revison board.   
     - Swapping the CPUs around.   
     - I also tried a pair of P3Xeon 700/1024 'cascades' from my other machine, but it won't post with them either.   
    Incidentally, with all my flashing of the bios, it now only detects 256Mb of the 1024 that i have installed (4x256 PC133), and i would quite like to get back my memory as well!  Next step will be to try going back to version 1.3 of the bios. 
    Other things of note.  I'm using a 300W ATX PSU.   Right now i'm just testing so apart from a 20Gb hard drive and a very low end 8mb graphics card there is nothing else apart from a couple of fans using the power.   This is plugged into the first ATX connector on the board (closest to CPUs).
    In Linux, i've also tried a lot of kernel options with no luck, for example 'append="noapic apci=noirq".  Linux is the operating system that I want to use, but I installed XP on another disk to see if was just a bad linux configuration that was causing this probloem. 
    Basically, Linux finds a local APIC, finds CPU0, but then says 'SMP motherboard not detected.  Brought up 1 CPUs'
    Any help would be greatly appreciated.   
    I'm at    right now.

    If i could work out that i could address both CPUs once i ifx the bios then I would order a BIOS upgrade chip.   But right now i would prefer not to spend additional money unless i have good confidence that this would be the case, especially as I understand the 550mhz unit is the fastest one that the board supports?

  • When I click "File", "Exit" or X in the upper right hand corner to close Firefox it starts using more than 90% CPU. I have to close Firefox by going to Taskmanager and click on the Process tab, select Firefox.exe and click on End Process.

    I am using Windows XP.

    You will also notice that your shift key will be emulated. Meaning that keys you will try to press will press but they will act like you are pressing the shift key when you are doing them.
    Try this, minimize the firefox window by pressing the tab on your taskbar. After doing that maximize it again. You will magically be able to click any link on your page. When you navigate to a new page however, the entire situation will start all over. My only remedy is rebooting and hoping it doesn't happen again soon.

  • Adobe premiere elements 12 with diamond vc500 one touch video capture device.

    Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
    AVI files will not load into Adobe premiere elements 12.
    I bought what I thought were the two best software and capture devices.
    I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
    That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
    EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
    You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
    Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
    Help please with long term archiving format and capture device.
    Thanks

    The answer is B.
    Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
    When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
    The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
    Diamond vc500 $35
    Adobe premiere elements 12 $65
    Firewire card $50 plus
    Canopus $180
    $330 is way too much for simple home VHS videos

  • Adobe Premiere Elements 10 not working on both my Computer

    I just bought Adobe Premiere Elements 10 to use with my Sony Handycam HDR-XR160 but it just dont work
    I first try to install on my PC: Intel Quad Q6600 with 8 Gig of Ram and a 500 Go WD Black Edition and a GeForce 9800 GT with 1 Gig of Video Memory .... really jerky video editing interface and the play back is really bad a lot of pixellization all over and also really realy jerky
    then I tried with My Mac Pro 2008 2XQuad Core Xeon 10 Gig of Ram 2 x 1TB WD Black Edition (Scratch Folder on second HD) and a ATI  Radeon HD 3870 same problem but now the video play back just stop every 5 seconde it s also hard just to drag the video in the time line at the botom of the screen
    This is computer I use for My Recording Studio and it's working like a DREAM. I did the same manipulation with other program like IMovie and so on with NO PROBLEM AT ALL .... and the interface was responsive unlike Premiere
    I bought your programe thinking I was going for a upgrade from what I was using before and now I can't take it back cause the box is open so please tell me you have a fix or someting cause at the moment ...  i'm really not to impress
    Thanks for the help

    Hello Steve
    Thanks for a your help
    I still have the same problem I did change the recording from 60p to 60i but the video are still jerky , I know i'm probably the one who's got the problems but I just don't see it !!!
    This is the setting I have on my Camera:       Image Quality/Size
                                                                      Image Quality = HD
                                                                      Frame Rate = 60i
                                                                      Recording mode = High Quality FH
                                                                      x.v.Color = On
                                                                     Connection
                                                                     TV Type = 16:9
                                                                     Component = 1080p/480i
                                                                     HDMI Resolution = Auto
                                                                     CTRL FOR HDMI = On
    From thoes Info can you tell me what's the Best Preset in Premiere or if someone is using premiere with a Sony Handycam HDR-XR160 can you tell me your exact settings for both the Cam and Premiere
    Thanks

  • Installation of Adobe Premiere Elements 12 always fails

    During the installation of my Adobe Premiere Elements 12, I always receive an error message (during the processing of linked components) which says:" During the installation an error has occured."
    I have purchased Adobe Premiere Elements online and use the appropriate key provided by the retailer.
    My Adobe Premiere Elements 10 works fine though but I would rather like to get my new program going.
    I have tried all Adobe error correction proposels already but unfortunately in vain.
    Any suggestions how to proceed?

    Thanks for your fast reply. I have already solved the problem and everything works fine.
    Von: kglad [email protected]
    Gesendet: Donnerstag, 28. November 2013 15:48
    An: Weblogger
    Betreff: Installation of Adobe Premiere Elements 12 always fails
    Re: Installation of Adobe Premiere Elements 12 always fails
    created by kglad <http://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5882899#5882899

Maybe you are looking for

  • In portal where we will create JCO destinations?

    HI Gurus, In portal where we will get the option or screen for creating JCO destinations.... I guess its somemwhere in System Admin----> If anybody knows the path please share with me....... Thanks in Advance, Dharani

  • Project management utility

    Hello! Does exist the way to unload MII projects automatically? I have dozens projects and need to unload it to external or network drive periodically. Now I do it manualy for each project via Project management export function. Thanks. Edited by: A.

  • XI to XI R2

    Post Author: ermanu CA Forum: Migration to XI R2 Hello, we would like to upgrade our XI environment to XI R2 1-Is it possible to do an upgrade on the same hardware (I've tried on a test system and I think I've lost all reports. The report names was t

  • Router ROMMON upgrade - your opinions

    Hello, I've read in several documents that there is only a need to upgrade ROMMON if there are new features in new ROMMON versions.But, e.g. the ROMMON upgrades for the Cisco 2800 platform, the changelog for 12.4(13r)T5 says "Enhancement for device a

  • Error "remote server is not responding in proper manner"

    Hello, Please help me, Im getting the error while installing the CC,