Adobe Premiere Elements 10

Hello,
I am a Senior Citizen on low income looking for low $ for free help getting started with Adobe Premiere Elements 10. Can you suggest a solution?
Thank you,
Richard Burnside

User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click the PDF link in the upper right corner and select to save to your hard drive
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Tutorials http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html

Similar Messages

Error message when downloading Adobe Premiere Elements 11

When attempting to download the Adobe Premiere Elements 11 from the cd, I'm getting an error message that reads: "The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again".I'm using a Windows 7 Operating System. When I attempt the download again, I get the same error message.

Curtis Baughman
Many of us have encounted this issue. The problem is not confined to a particular version or computer operating. Many homemade remedies and scientific ones have worked for some and not others. The most recent fix was offered by an ID by the name of Maud Barbara and seems to have been the answer for that user and at least one more.
Maud Barbara's fix can be found at the end of the very long thread on the subject found
http://forums.adobe.com/thread/1121947?start=40&tstart=0
The rough Google Translate went
Hello
I had the same problem as you and I just d have the solution:
go to C / program files (86) / common files/OOBE
Rename OOBE by OLDOOBE
and your problem is resolved
You can reinstall the software
What worked for me in this case was none of the above. How I and others navigated this installation problem is documented in the thread cited.
We look forward to your results to see what turned out to work for you.
Thanks.
ATR

No Disk Error for Adobe Premiere Elements 12

I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!

Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Adobe Premiere Elements 10 with Photoshop Elements 9

Is it possible to use both Adobe Premiere Elements 10 with Adobe Photoshop Elements 9?
I don't want to upgrade Adobe Photoshop Elements 9 because has not enought new functions but need new Premiere with Organizer.
Does Adobe Photoshop Elements 9 will work correctly with Organizer of Premiere 10?

Hi,
It is possible to use both of them, seperately though. If you wish to do use some interoperable feature, that wont be possible, since, as Steve said, they both use thier respective organizer.

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere Elements 11 - install on new computer

I have previously purchased Adobe Premiere Elements 11 and have the serial number available. How do I install it on a new computer using the serial number?

jzd
The important question is "Is this Premiere Elements 11 Mac or Windows?" If Mac, did you purchase it as the Adobe Premiere Elements 11 Editor from the Mac App Store?
If it is Premiere Elements 11 Windows or Premiere Elements 11 Mac from Adobe, then you can download installation files at this late date from the following web site and then insert your purchased serial number during installation.
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
If you do decide to go this route, make sure that you read Note: Very Important Instructions on that web site page, otherwise you will run into an Access Denied message.
ATR

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
It`s right, the program is not istalld, it is what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

"Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

Adobe Premiere Elements 0.9 project crash, HELP!

This is the first time I am using these forums, so I hope I posted this in the right sektions.
I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
I have also read through and tried some things from this Help/Troubleshoot page:
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
In either cases, I need help with this. Please, help!

Thanks so much for your reply, Steve!
Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/

Adobe Premiere Elements 9 - animated Gif Export

Hallo
ich habe gelesen, dass Adobe Premiere Elements 9 auch animated Gif exportieren bzw. erstellen kann. Leider habe ich weder unter "Datei/exportieren" noch unter "freigeben" eine solche Option finden können.
Kann mir jemand schreiben wie ich diesbezüglich weiterkomme.
Gruß Ronny

Hallo Bernd
dieses Video kenne ich bereits. Das Problem ist, dass in diesem Movie der Film unter Datei/exportieren als animatet gif abgespeichert wird. Diese Option ist allerdings bei meinen PE9 nicht verfügbar.(Weshalb auch immer) Derzeit exportiere ich den Film aus PE als AVI ins CAMTASIA Studio 7 und konvertiere es als animatet gif. Ist zwar nicht der Königsweg - aber es geht einigermaßen.
lg
Ronny

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Can't open Adobe Premiere Elements 9

I've had some problems with Adobe Premiere Elements 9 recently, and right now I'm not able to use it. I'm not sure what the problem is really or how to fix it so I'll just write down what has happened here and hopefully someone knows what to do.
A week or so ago my laptop started to crash repeatedly, but fortunately that was solved. But then I noticed that when I opened Adobe Premiere Elements, that's when it crashed and only then. It stopped crashing altogether except for when I opened this program (if it is of any importance I also tried opening Windows Movie Maker to edit there in the meantime but the same thing happened there, which seems strange and kinda random to me). I decided to get an antivirus software and install that and see if that took care of it, which I have now done. That didn't exactly take care of it though. The laptop did stop crashing when opening the Adobe software, but nothing happens once it's opened. The tabs on the top right are there but the whole program is just grey (where you would normally have the timeline on the bottom, video to the left, and the files etc. to the right) and nothing else comes up. I then tried to uninstall Adobe Premiere Elements 9 from my laptop altogether and then re-install it with the CD I still had from purchasing the laptop a couple of years ago. But after re-installing there is no change. Just a grey screen once again, except for the tabs and all that on the top. Now I'm not sure what else to try. It's frustrating as I need this program to work right about now. Does anyone know what to do? Thanks.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Some of the below is for Premiere Pro, but the idea is the same for Premiere Elements
Dual video problems - Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

How many cores can Adobe Premiere Elements 12 utilise on a CPU?

I am looking into purchasing 1 of 3 different products right now and Elements is one of those with others being competitors. Due to Elements not utilising OpenCL or Cuda increased rendering speed, other software looks like a better solution. However, the ones I am currently looking at only use up to 4 cores. The processor I am looking at is the Intel 4930k 6 core processor, will Elements utilise all cores effectively? Also I have heard Elements runs poorly on Windows 8.0 and 8.1 as compared with 7.* . Is this the case?
-Best Wishes, A

ABane
This is not Adobe. Just a user to user forum where some of us do not have 6 core processor. to give you a first hand answer and and all of us do not have access to Adobe Engineering support documents that are not typically seen online. We visit here on a non scheduled basis, so a posted thread does not activate an instantaneous reply process.
If you want an Adobe answer to your question, you might click on the following link, and, when it opens, click on the statement
"Still need help? Contact us." in order to bring up Adobe Chat for the topic of "Downloading, Installing, and Setting Up".
Contact Customer Care
Interesting, it looks like a new format for the old link. But, let us see how effective it is with this new format.
Premiere Elements 12 should be able to use 4 cores. Probably 6 cores for encoding, but I cannot give you the definite answer.
Supported devices | Adobe Premiere Elements
I can tell you first hand, Premiere Elements 12/12.1 runs well on Windows 7 Professional SP1 64 bit, Windows 8 64 bit, and Windows 8.1 64 bit.
And these computer are using dual core processors.
ATR

My seriel number for getting adobe premiere elements 12 doesn't work, how can i do ?

Hi!
I bought a canon camera in November and a pack of lightroom 5 and adobe premiere elements 12 were with the camera.
Then i have 2 serial number and when i put the premiere element serial number for getting the app, it doesn't work, the error message says that " we can not validate this serial number please contact the customer service"
But it's the right number and i don't know what to do...
Help please

Did you get a disc for the software? Are you sure you are installing version 12?
See if the following helps: Error unable to validate serial number | CS6

Sorry, a serious error has occured that requires adobe premiere elements to shut down. we will attem

So I've had premiere elements 9 for a while and it always worked just fine, but one day right in the middle of working on a project i get this error message:
sorry, a serious error has occured that requires adobe premiere elements to shut down.
Why did this come up? I know I've plenty of free space and everything! Please if you know how to fix it then help!
Some other info:
My computer runs on windows 7
Once again, the Premiere elements I'm using is 9
Please if you know what to do please help!

Yes Bill,
I too have been very errant in turning off the CA Vet Security system , it too causes problems .
Regards,
Bob

Adobe Premiere Elements 10

Similar Messages

Maybe you are looking for