Adobe Premiere Elements 12 says that "Windows is not responding" every 5 seconds.

I have Windows 8. APE-12 is downloaded on a 500GB External Hardrive.
This message poped up alot in internet explorer and when I used to use Pinnacle. However for APE-12, the message pops up everytime i click the play button. it is very annoying. Please help  me.

T-Hans
I was going to write the following as an add on to my post 2, but I think John's post bumped me off in the middle of doing that.
Here are the threads that I was remembering. Please check them out to see if anything in them applies your situation.
I am not sure if Akshat B (post 2 of the following) had an external hard drive in mind
http://forums.adobe.com/message/3284673
http://www.elementsvillage.com/forums/showthread.php?t=66000
ATR

Similar Messages

  • Is there a way not to have to use the disk to start or exit Adobe Premiere Elements 13. I do not want to have to carry a disk around with me all the time.

    Is there a way not to have to use the disk to start or exit Adobe Premiere Elements 13. I do not want to have to carry a disk around with me all the time.

    tljtommy
    There is a known No Disc error using Premiere Elements 13.
    The fix is to delete the OldFilm.AEX file which is found in Window 8.1 64 bit
    Local Disk C
    Program Files
    Adobe
    Adobe Premiere Elements 13
    Plug-ins
    Common
    NewBlue
    and in the NewBlue Folder is the OldFilm.AEX file that you delete.
    Adobe first posted this information in one of the threads here, and it has worked for essentially all who have
    gotten the No Disc error in Premiere Elements 13.
    Please let us know if this works for you also.
    Thank you.
    ATR

  • I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

    I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

    rickeyt
    Thanks for the reply. Great news about the volume adjusts.
    Now about those fades for the volume. How are you doing that?
    1. Right click the Timeline video audio and select Fade and then
    see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
    2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
    Please let us know if any of the above works for you with regard to the audio fades.
    Thank you.
    ATR

  • When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

    Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • I can't run Itunes! After installing Itunes, I receive a message saying that Windows could not verify Apple's digital signature and it closes.

    Pls HELP me! I can"t install it Itunes on any of my computers. After downloading it ( Run now or Saving it) it will no run because I keep receiving a message saying that Windows can not open this file because it could not verify Apple's Digital Signature. I have changed my internet security settings to allow downloads from unverified websites but it will not allow me to run Itunes. I had an older version of Itunes so I tried to install the update and it wouldn't work because so the same message about not being able to verify the digital signature.  I uninstalled Itunes and Quicktime and all other Apple programs on my system. Then I tried to download it again... no luck the same message came up again. I then went to my other computer that NEVER HAD ANY APPLE software on it and tried to download Itunes. It gave me the same message. Please help me, I'm going crazy tring to figure this out.

    I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Good luck. Worked for me back up and running.

  • TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

    its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

    http://support.apple.com/kb/TS1567

  • If I buy Adobe Premiere Elements, does that give me a 1-year license or is it unlimited?

    I want to buy Adobe Premiere Elements, but it is not clear to me if it gives me a 1-year license or if it is unlimited? Different websites give me different information.

    jew96
    A limiting factor may be the compatibility of a given version with advancing computer operating systems.
    Hopefully that should not become a factor for a while.
    But, do note that the newly released Premiere Elements 13 is not supported on Windows XP, Windows Vista, or Mac OSX 10.7
    like earlier versions.
    ATR

  • Adobe Premiere Elements 4 Crash - Windows Vista

    After approximately 14 to 16 seconds of viewing any .mod video file recorded from my JVC Everio camcorder a Windows error message appears and Adobe Premiere Elements 4 immediately crashes. Is there a patch or fix for such a problem? I have checked that my computer system meets the system requirements and I am unsure what else to do other than returning the software?
    Error message in full reads:
    "Adobe Premiere Elements.exe has stopped working. A problem causeed the program to stop working correctly. Windows will closs the program and notify you if a solution is available"
    My new HP Pavillion (m8075a) computer system includes:
    Intel Pentium D CPU 3.2GHz
    3070 MB (RAM)
    210 GB Free Space C:Drive
    Windows Vista O/S 32-bit
    RealTek HD Audio
    NVIDIA GeForce 7500 Le
    Samsung Monitor SyncMaster 226BW(Digital)
    Any assistance would be appreciated.
    Regards,
    Kim

    My objective is to handle MOD files from a JVC Everio Hard Drive Camcorder with Adobe Premiere Elements 4.0 (PE4) as PE4 crashes after a little while when using MOD or MPG files.
    Sorry Steve but I dont want to use the software that came with the JVC Everio camcorder. I bought PE4 (in euros ...) to use it. By the way MOV files used by QuickTime have nothing to do with MOD files from JVC Everio camcorder! Yes I know, it's confusing.
    After some months of useless forums, reading, hardworking and frustration, I finally found a solution to the problem!! PE5 works quite well and no crashes have occurred so far....
    Here it is. It's not straightforward as you have to use two different free programs but the method is simple to follow.
    1. Transfer MOD video files from the JVC Everio camcorder to the PC.
    2. Convert MOD files into MPEG2 files with the help of a freeware program (I used Converio)
    3. Convert MPG files into DV-AVI files using Free Video Converter.
    This free program is very simple to use and DV-avi files output is compatible with PE4 which is not the case with some other conversion programs.
    As DV-AVI files are not compressed, they are more easily handled by video programs.
    I havent been able to directly transform JVC MOD files into files fully compatible with PE4. If someone knows how to do this, please tell me.
    In conclusion, I feel it is unacceptable that neither JVC nor Adobe offer the compatibility of their products. The information provided by these reputable companies is deceitful for unaware users and sometimes wrong.

  • Get a black screen with a colored border saying that mozilla is not responding. Any help would be appreciated.

    Start firefox and get to homepage . When proceeding to another link or page firefox stops responding and I get a black screen with a colored border stating at the top of the page that mozilla is not reponding. Try to go back to home page and mozilla shuts down. Any help would be appreciated. Prefer to use firefox over internet explorer in which case the problem is not duplicated. IE9 works fine. Long time firefox user and hope to continue to be. Thanks
    Ted

    I created an account just to say that firefox is not what it used to be and I'm very disappointed in it and it's developers. I've been with firefox since the day of it's launch. Every new version after firefox 2 has been a let down--- what's the point when I get the same type of ridiculous crashes and freezes? What really annoys me is when I click "new" to create a new message to send within hotmail and it freezes for about 30 seconds to a minute. This happens every time without fail! I've updated a newer version 3 times and still the same thing. I've noticed that there have been more new releases, but I'm now convinced that it's only for show--- trying to stack up to Opera. Firefox copies off of Opera a lot, but it's too bad the developers can't copy it's stability. Who wants to have to read through forums looking for a fix... who has time for that? I don't want to, but I'm really considering leaving firefox for good. Please, get it together and FIX firefox.

  • Where do I find the file to install Adobe Premiere Elements 10 on Windows 7 64 bits?

    Hi there. I ran a little search on the forum for that subject but I couldn't find it. So, if it is a double post or something like that, I'm sorry, and please lead me to where it was already talked about.
    The thing is: I bought the downloadable bundle with Premiere Elements 10 and Photoshop Elements 10 and I have the links to download them on my account, no problem. I installed them both on my Windows XP last year and that was ok.
    Yesterday I upgraded my PC and now I have Windows 7 64 bits on. I could install Photoshop Elements just fine, but when I try to install Premiere Elements 10, the following error message appears.
    So, what do I do? I looked for it on my account again and there is no other file there, just the same file I used before on Windows XP and I'm trying to use now, just like with Photoshop Elements 10, but that worked just fine.
    And that leads to my question that is the name of this discusssion. Can someone help me? I live in Brazil and I didn't want to call phone support, and since I didn't find any free agent to call me on chat support, I decided to go here.
    I hope you guys can help me and thank you in advance.
    My best regards,
    Joao Jose Gois

    Hi Jeff, thanks for the reply.
    Unfortunately it didn't work, but I guess that you helped me to really find the issue here.
    I really have only one installer available to me, for both Photoshop Elements and for Premiere Elements. However they have a slight difference in the file name.
    On Photoshop, when I download the files, their names are just "Photoshoplements_10_LS15" and the extension. However, on Premiere, after the name of the program there is "win32" and only then we get to the extension file.
    So, I only have access to Win32 download. Even if I click on the "Alternate Download Method", I can only see two files: One that is the .7z file and the .exe, but both saying "win32" in the name.
    I still can't install it in here.
    Is there any mail that I can send to adobe support? When I go to Brazilian Adobe Online Store and click on Support, I'm always redirected to the '.com' website and I end up here.
    Once again, thank you all in advance for all the help or attention for this thread.
    Regards,
    Joao Jose Gois

  • Download content for Adobe Premiere Elements 9.0 Windows 7

    I have downloaded HD content 1, 2 and 3 to a folder.  The installations instructions say I should click the folder that I want to open.  A dialogue box should appear where the content should be extracted and I should provide the path and choose OK.  I have no idea what path to provide.  Can someone help?
    http://http://www.adobe.com/special/premiereel/downloads/

    I would recommend posting your inquiry to the Premiere Elements forum.

  • Adobe Premiere Elements 8 Plus (Windows,English) Elements Plus 20GB (Annually) (Other,English)

    I purchased the above mentioned products 9/26/2009.  I am unable to use projects because I get an error message stating I need to purchase Premiere Elements before I can use it.  I HAVE purchased it.  Then, I get an error message stating that "a reduced set of content (instant movie themes, title and menu templates, etc) has been installed.  To install the full content set, please insert your Content DVD and run Setup.exe.  If you do not have a Content DVD please visit http://www.adobe.com/go/pre_additional_downloads to download the content installer.  My situation is the latter - I don't have a content DVD and when I go to the additional downloads site content installer can't be found. 
    Can someone help me?  I have contacted support and my questions have never been answered.
    Thanks. ML

    Marilyn,
    My suspicion is that perhaps you had downloaded the trial and then later purchased either from the Adobe store or a retail store: in other words you did not purchase from within the trial. Or maybe you purchased a download from the Adobe store but did not enter the serial number in to Premiere Elements. Now it does seem like Adobe customer service should have been able to explain what you need to do : however since that approach was not successful ...
    In order to get the best assistance from these forums and to address a question specific to Premiere Elements (like its additional content) I suggest that you post on the forum dedicated to Premiere Elements at
    http://forums.adobe.com/community/premiere/premiere_elements

  • Trying to install Adobe premiere Elements 10 on windows 7

    I purchased the Adobe Pemiere Elements 10 and tryed to install it in windows 7. Got the 2nd disk to process it and after "restart the computer" I received a web message "webpage has expired". I tryed again and it said " Oops, resources are down. Now What?

    Wait and try again later.

  • After restarting i get a message saying that Windows could not connect to the Group policy client service

    The message i get is the following: 
    Windows could not connect to the Group policy client service. This problem prevents limited users from logging on to the system As and administrative user you can review the system event log for details why the service didn't respond.
    This happens after restarting my laptop. It takes longer than usual and once it has booted up and loaded Windows Vista, I get the message on the right bottom corner as a window popping up.
    I can still use my computer but a lot of my user account settings are not there.
    I fixed it temporarily by rebooting using the option: boot up using my last successful configuration. Bu once I restart again the same thing happens.
    How can i fix it?
    Thanks.

    Hi,
    Please try the solutions on the following threads:
    http://social.answers.microsoft.com/Forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-bfba-7a98e642c009
    http://social.technet.microsoft.com/Forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1
    If the problem continues, please let us know if the computer is in a domain environment.
    Regards,
    Bruce

  • How do I make my movie run smoother in Adobe Premiere Elements 10, on Windows 7?

    I have all of the frames in order, and everything else is perefect, but the final product is so choppy.

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

Maybe you are looking for

  • Tv series on iPad ?

    I have downloaded a tv series on my IPad.  I have watched about half of it. Now when I try to watch the next episode it says movie cannot be loaded.  Any suggestions?

  • Extended classic scenario to Classic scenarioc in SRM.??

    someone pls tell me how to change from Extended classic scenario to Classic scenarion while creating in shopping cart...? I am using BADI "BBP_EXTLOCALPO_BADI" change to classic scenarion from extending classic..but i got confused about source code..

  • Lag When Recording Live Stream

    I am experiencing a very strange behavior from FMS I am conducting a live conversation between 2 people using their webcams. One of the participants have a relatively slow computer (we think its the anti-virus). When conducting the live session every

  • Container Object - type Abstrace Interface

    Hi everyone, When I try to create a container Object in BPM of category Abs. Interface, for the type, it gets the Async Abs Interfaces only from the IR but not Sync Abs Interfaces. Is there any reason for this. It is on sync send step. -Naveen.

  • Ejbc error, no PKWrapper class

    I am getting the following error when tyring to generate the container classes: Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/ejb/internal /PKWrapper I looked in my weblogic install directory, and under c:\weblogic51\classes\web