Adobe Premiere Elements 4-lost transitions and titles

I have been editing a Adobe Pre 4-projects and saved it a couple of times during the last 14 days. Yesterday I moved the whole project file to another disk (external), unfortunately I did not copy and save; I moved it.
Now when I open the project from the external disk, all the transitions and titles are gone. Where have all the transitions and titles gone?

Hi thanks for the response,
So I had adobe PrE 4.0 and downloaded the free trial version of adobe PrE 10 from the adobe site. I opened my PrE 4.0 project file in the trial version to see how it would look and it looked fine but for some reason PrE 10 is extremley slow on my computer and I have an ok computer, and I am not talking about the playback video was choppy, which it was, the editing process on the timeline was so slow and choppy that it was hard to edit properly. The did not move any files and PrE 10 didn't ask me any questions, I just go on it and opened the project file up from the PrE 4.0 file location. So I got rid of the trial version and went back to PrE 4.0 to get back to work on the same project and when I got there the transitions and titles would not work for that project file, however if I started a new file it would work fine (but I do not wish to start all over), when the video got to the titles in the playback video a red screen with the words media offline in several languages would come up and than go away once the title was supposed to be gone. I have the bad/messed up project file on my flashdrive now too. If we can't get this to fix on 4.0 than maybe you could tell me how to fix the PrE 10 because I got that too just in case, maybe you could tell me how to speed it up because it is unbelievably slow, and I have windows 7 64 bit operating system.

Similar Messages

Adobe Premiere Elements 12 will launch and then vanish

Okay so just bought Adobe Premiere Elements 12. Loaded it up and went to run it. First time I ran it I get the Adobe Premiere Elements 12 Launch pad, you know where you select the Organizer or the video editor. I select video editor, it gives me a sub menu asking if I'm opening an existing Project or a new project. I select new project. the Video editor opens and I get a pop up windows stating "Please Log-in with an Admin account to access Adobe premiere Elements." I hit 'ok' and the video editor promptly vanishes leaving me at the launch pad which I close. I go to the short cut, right click on it and select "run as administrator." and I re-launch the program. Back to launch pad, select video editor, select new project. The video editor loads and appears to be working for about 3 seconds and then it vanishes. No error window, no crash report nothing. Just 'pop' it's gone.
Any idea what I can do about this? I'd really like to use the software I just bought.
Compute specs:
OS: Windows 7 Home Premium
-updated system drives yesterday
Prossessor: AMD Phenom 2 X6
8Gb ram
NVidia GeForce GTX 460 4GB card
-Drivers updated yesterday
Primary drive is a solid state 128gb
2 secondary SATA drives at 1TB each
Premiere Elements is loaded on the 1st of the 2 secondary drives.

Please confirm...
a. Are you running the program from a User Account with Administrative Privileges as well as the Run As Administrator from the right click of the program's desktop icon?
- I am running it from an admin level account.
b. Did you install the program to the default drive C location...you mention "Premiere Elements is loaded on the 1st of the 2 secondary drives", but is it the drive designated C?
- No. all I have on my primary drive (C:\) is windows, drivers and scratch disk. All my programs outside of windows are loaded on the drive designated J:\
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
- I did not before, but I just updated it before responding here. No effect.
d. Does your computer use just that NVIDIA video card/graphics care? Is there a second card displayed in Device Manager/Display Adapters?
- the NVIDA GeForce GTX 460 is my only video adapter.
e. Does the problem exist with and without antivirus and firewall(s) disabled?
- Yes. I shut off Kaspersky and tried running the program via the launch pad. no change.
You say that the crashes occur when you select Video and new project. What happens if you select Organizer instead? Still crash?
- If I go into Organizer the system seems to run fine. I loaded Organizer about 20 minutes ago and it's still up and running just fine. But in that same time span I've tried to launch premier elements several times. It still crashes after a few seconds.
New data though. Can't tell if it's from Premier, or something else. a couple minutes after the latest attempt to run Premiere Elements I found a new window with the header "CAHeadless Debug Event". The Window reads:
CAHeadless has encounter an error.
[..\..\Src\Sequence\Sequence.cpp-2233]
and then I have a button that reads "Continue".

I have adobe premiere elements 10 and I am having some problems with it please help

So here are the problems I'm having with Adobe Premiere Elements 10:
1. Transitions will not load. The word loading pops up and it won't come up.
2. The videos won't play smoothly. When I press play it skipps in a way it won't play smooth which makes it really hard to edit.
3. Keeps closing out on me. It will have a thing that pops up that says "Adobe premiere elements has stopped working and closes out of the program. It does it constantly.
Please help me I don't know what is wrong with it.

The first two issues sound like a video driver problem.
What is the make/model of your video card/chip?
What is the installed video driver number and date?
For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
Good luck,
Hunt

Any Solutions for when Premiere Elements 8 which crashes when Title is used?

I have been using the software since 2010 without major problems and have produced many videos, both Blueray files for using on a media player and DVDs. All of this time I have been using video from the same camera; a Sony HDRCX110 which produces an m2ts file, and have also been including stills from various cameras. The software now crashes when a new title is attempted. I have read previous responses to a similar question and have done the following in accordance with the responses:
- updated Windows 7 and Quicktime,
- used CC cleaner to remove temporary files
- reduced the number of files on the hard drive which now has 548Gb free.
Can anyone suggest further action please?

Mocca Warrandyte
Thanks for the update. Sorry the news is not better. But, onward.
If you have not been through the uninstall/reinstall process, it is probably time to go through that.
Before you do, just to dot the i's and cross the t's, check out the video card driver to make sure that it is up to date according to the manufacturer of the video card. If that does not contribute to getting the issue resolved, then
1. Go back to the Adobe Premiere Elements Prefs file, but this time delete that whole folder (8.0 Folder) in which the Adobe Premiere Elements Prefs file exists. Before you just deleted that one item in the 8.0 Folder, namely the Adobe Premiere Elements Prefs file. The path is reproduced for reference.
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
8.0 Folder
and in the 8.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
2. If that does not have any impact on the situation, the let us go for Help Menu/Deactivation in the open project. Close out of there. Then Uninstall via the usual Control Panel route. Next ccleaner, regular and registry parts. Then Reinstall the version 8. Then Reinstall the 8.0.1 Update.
Please review and let us know if you have any questions on the plan.
Thanks.
ATR

Adobe Premiere Elements crashes on export

Hello,
I am working on a video project in Adobe Premiere Elements 4.0. My computer is a Windows Vista Ultimate 32-bit Dell XPS M1530 laptop with the following hardware:
Toshiba MK3263GSX Disk Drive
285 GB, 149 GB used
burst transfer rate: 3 MBps
5400 RPM
8 MB cache
Intel Core 2 Duo CPU T8300
2.40 GHz
4.00 GB of RAM
Whenever I try to export my project (which is less than 3 minutes long and contains no more than 2.25 GB of 720p 30fps video), the program crashes. Usually, the progress bar will go about half way before an Adobe message tells me that Premiere is running low on system memory. Not long after that, a Windows message appears telling me that "Adobe Premiere Elements has stopped working" and it crashes to the desktop. This has occured without fail perhaps 50 times in all my tries to get this to save.
As this project has progressed and become larger and larger, it has become more and more difficult to export. At first, there were no problems. Then, I had to start restarting the program or my computer immediately before exporting. After making a few more changes and additions, I have been entirely unable to export succesfully.
I have set my export settings at far lower levels than would be acceptable for this project, but the program still crashes. I was most recently trying to save the file as an .mpg with the NSTC Widescreen DVD settings. Trying to save in other file formats and at other settings has not been succesful.
I do realize that this is probably a commonly asked question, so I apoligize for bringing it up again. I have searched for information on this topic and have tried several suggestions, including changing the virtual memory and cleaning up my hard drive.
Is my computer just too weak to export this project? Would a more recent program fix my problem? Are there any techniques or suggestions I should try?
Thank you very much for your help.

>chose setting NTSC HDV
According to Kodak http://store.kodak.com/store/ekconsus/en_US/pd/Zi8_Pocket_Video_Camera/productID.156585800 you are not selecting the correct setting... that camera does not use HDV
If the forum search is working today, search on
kodak zi8
to find out what you should be doing

Adobe Premiere Elements 11 is not responding

I work on a macbook pro. I have Adobe premiere elements 11. I uploaded video to a new project. I dragged some of the thumb nails onto the timeline on Thursday and successfully edited. Today I dragged a few more onto the timeline and began editing. All of a sudden, the cursor begins spinning. I go to force quit and it tells me that the program is not responding. I quit and tried again. I have rebooted my computer a number of times, but to no avail. Any suggestions as what I can try to keep the program running and edit my project? Should I just open a new project and start from scratch since I haven't edited many of the interviews?
Thanks.
barb

barb
Please determine if you can open a new project without problems.
Do you work with the AutoSave ON in preferences (Edit Menu/Preferences/AutoSave)? If so, go to the Adobe Premiere Elements Auto Save Folder and go through the Auto Saves
seeking one that will open after you double click it. Each of those AutoSaves is the project file at different phases of your editing. If you get one that opens, then build it back to where you were before you ran into the problem.
If you can get to the build back from an AutoSave, I would watch closely to see what addition to the project sends the project back into trouble again. Then we target
the addition for troubleshooting.
Please review and consider and then let us know the outcome.
Thank you.
ATR

Adobe Premiere Elements 13 stops working trying to add media via videos from camera

When I try to add media selecting videos from camera or flip, Adobe Premiere Elements 13 stops working and closes. What might be the problem?

elizabethmeow
On what computer operating system is your Premiere Elements 13 running? Have you had the opportunity to update 13 to 13.1 using an opened projects Help Menu/Update?
What are the full properties of your source media and how are you importing them that you are trying to import into the project? A quick way to get that information, if you do not know that information, is for you to post the brand/model/settings for the camera that recorded the video.
Do you have the latest version of QuickTime installed on your computer with Premiere Element 13, and are you running the program as Administrator?
Lots of additional questions, but the answers to the above may give us the answer that you need to resolve you issue.
Thank you.
ATR

I am not able to buy a trial version of Adobe premiere elements

I am not able to buy my trial vesion of adobe premiere elements. My id and password is for Au and is not being accepted

Trial versions are free and you don't have to pay for them.
What problems are you encountering when using your AdobeId and password
to download the free trial version?

Cannot download adobe premiere elements 12 from card

I got given adobe premiere elements as a gift and the serial number does not work

http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
Mylenium

Adobe Premiere Elements 12 video preview choppy

Preview video in Adobe Premiere Elements 12 is choppy and I'm unable to edit with this program. I transfered the video from a DSLR to my hard drive and then added the video from the hard drive to Adobe Premiere Elements. I don't have the same problem editing with Windows Movie Maker. I'm using a Dell Studio 15 laptop with Intel 2-core processor, 4 GB RAM and 500 GB HD. I imported video from the laptop and an external 3 TB HD. I also tried adding clips directly from the camera - a Canon EOS 70D - and it's still choppy and impossible to edit.

>meet the requirements for Adobe Premiere Elements
There have been MANY discussions here, and in the Premiere Pro forum, about Adobe's requirements
The general concensus HERE is that the Adobe marketing people want more people to buy the program, so they list MINIMUM requirements, not EFFECTIVE EDITING requirements
In the PPro area, but This message has a really good picture showing requirements
Click the picture to expand to readable size - http://forums.adobe.com/thread/810750

Adobe Premiere Elements Won't Start A New Project?

When I open up Premiere Elements and try to start a new project, all it shows is a black and purple line, then it just stops. I have already tried updating QuickTime, Windows 7, Nvidia Drivers, and Uninstalling and then Reinstalling Premiere elements. I am running it on a PC that has an AMD FX(tm)-6300 Six Core Proccessor, 8 GB of RAM, a Nvidia G-Force GTX 650, and i installed the program on a secondary hard drive with 761 GB of free space.

xXFIRE
What is this "secondary hard drive" on which you originally installed Premiere Elements 12? Internal or external and how formatted NTSC or FAT32?
I do not see where anyone has asked about "Scratch Disks" as they relate to your issues?
Please refer to Edit Menu/Preferences/Scratch Disks...
a. Where are the scratch disks directed and how much free hard drive space is at that location?
b. Do you have all the scratch disks categories directed to the same place? If not, do so and make sure there is lots of free hard drive space where you are pointing them to.
Please look for pile ups of preview files in the Adobe Premiere Elements Preview Files Folder and pile ups of conformed audio in the Media Cache Folder. Both these folders by default are in Documents/Adobe/Premiere Elements/12.0.
Please go to Edit Menu/Preferences/Media and hit the Clean button in the Media Cache Database in that area.
As for the matter of where Premiere Elements program should be installed. Interesting question and some interesting answers. Back in a 2010 thread here on this type of subject, Akshat B (Adobe Staff) wrote
Yes you can install Premiere Elements on any other drive. For that you need to follow these steps:
1. Uninstall current copy of Premiere Elements.
2. Start the installer of Premiere ELements.
3. Choose a location on d:\ drive after choosing the default TV format.
Please keep in mind, even if you select d: drive as the install location some amount of data will get copied to C: drive.
-Akshat
http://forums.adobe.com/message/3284673
Is your Local Disc C, a SSD drive? Why is there so little free space on your Local Disc C?
More later.
Looking forward to your follow up?
ATR

Adobe premiere element 11 with maverick

Hello,
I can't run my Adobe premier element 11 sofware on Maverick.
Could you help me?

menardst
Thanks for the reply.
Please clarify "I can't run my Adobe premier element 11 software on Maverick"?
Can you deactivate it from within a project, uninstall it, and reinstall it? Is the program listed in installed programs?
Since it worked before but not now, that is in our favor.
This tends to make me think to updates. What programs and Mac features are set to update automatically on your computer which it has installed on it the Premiere Elements 11 Maverick? Can we assume that you have the latest version of QuickTime installed on the computer involved? If so, is QuickTime working?
How far do you get into the program....desktop icon, Welcome Screen, Expert workspace, other?
Have you looked into the issue with and without the anitvirus problem disabled? And have you checked the permissions on the computer to determine if they got changed unknowingly? Have you re-evaluation the Scratch Disks situation - location, free space, and pile ups?
We could look into installation and running of the program from a new User Account with Administrative privileges in the thought that the current one has become corrupted.
If you have not already, you could think uninstall, ccleaner run through, reinstall to get rid of leftovers from incomplete installs and installs?
CCleaner for Mac OS X
Before that, you could delete the Adobe Premiere Elements Prefs file....Users/User name/Library/Application Support/Adobe/Premiere Elements/11.0. And, in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
Are there any error messages associated with this issue?
Please review to make sure that my assumed Premiere Elements Mac features are in the right place from my Premiere Elements Windows perspective.
More later.
ATR

Adobe Premiere Elements Help

I am using Adobe Premiere Elements 4.0 with Windows 7. It's worked before, but now every time I try to work on my project a window pops up that says "Adobe Premiere Elements has stopped working" and the programs closes. Occasionally, a different window pops up that says "Adobe Premiere Elements is low on system memory. Please save your project and proceed with caution." Help!

ajn333
I think that we need to look at those low memory messages. And, we need more details.
1. Given you have Premiere Elements 4 on Windows 7? Is that 32 bit or 64 bit. Premiere Elements 4 will be a 32 bit application either way with max. supported installed RAM = 4 GB of which 3 GB of RAM or less are available. So, first, how much RAM do you have installed and how much of that is available?
2. What is your project preset and what are the properties of your source media? Photos, pixel dimensions and how many photos; video, properties for video and audio....total duration of the Timeline. Those video and audio compressions as well as the file extension are important. Are you working with any DV AVI Type 1 video on that Timeline?
3. How long ago did it work before? And for how long were you working with Premiere Elements 4 without issues?
4. Have you optimized your computer? Besides the RAM situation, how much free hard drive space do you have? Do you do routine computer maintenance to get rid of pile ups of preview files, conformed audio, and conformed video?
5. Since the time when things were working until now, any additional programs, codecs, plug-ins, and the like?
6. What specifically are you doing in the project when you get these low memory messages and/or program and project shut downs?
Are you just opening the project, in the middle of some heavy editing, or other?
Let us start here and then decide what next.
The answers will be in the details.
Thanks.
ATR
Add On...Please do not hesitate to ask if you need clarification on anything that I have written.

I had to reload windows and I have lost my Adobe Photoshop Elements 12 & Adobe Premiere Elements, I have the original online PO can I still download fthis software from Adobe and how?

I had to reload windows and I have lost my Adobe Photoshop Elements 12 & Adobe Premiere Elements, I have the original online PO can I still download fthis software from Adobe and how?

stepheng
Do you have the purchased serial number? What computer operating system?
If you purchased from Adobe direct, you can get download installation files from "My Orders" at the Adobe web site under your Adobe ID and Password (http://www.adobe.com).
Alternatively, you can use the following Adobe document with links to the downloads....
Other downloads
Also, from the following web site as a tryout into which you insert your purchased serial number during installation
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
To avoid Access Denied message, follow carefully the web site's "Note: Very Important Instructions".
Just in case note...make sure installation files are for your computer operating system 32 vs 64 bit. Two files (.exe and .7z)
Any questions or need clarification, please do not hesitate to ask.
Please let us know the outcome as your schedule permits.
Thank you.
ATR

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Adobe Premiere Elements 4-lost transitions and titles

Similar Messages

Maybe you are looking for