Adobe Premiere Elements 9 - Mosaic Effect

Hi. I have a video where I want to apply the mosaic effect as an inverse (i.e I want the center of my video to be clear but the outside surroundings to be mosaic). I work at a company where we can not take people on our produciton floor so we are showing them a video of our process and I want to put the mosaic around the proprietary areas in the video.
I can not figure out how to do this and have search endlessly online with no luck. Is this possible?

This article will tell you basically what you need to do: http://forums.adobe.com/thread/390834?tstart=0
In that article, I show how to use Track Matte Keying to affect a portion of the Frame. In your case, you want to apply the Effect (Mosaic) to the majority of the Frame, but leave a portion free. In the article we used Blur on the duplicate of the Clip, and then limited it to just the area of the Track Matte Key. In your case, just change the Clips positions - the Mosaic will now be on Video Track 1, and the "clear" Clip will be on Video Track 2. The Track Matte will be on Video Track 3, with the Clip on Video Track 2, linked to that.
Good luck,
Hunt

Similar Messages

Adobe Premiere Elements 11 Effects Problem - HELP

I use Adobe Premiere Elements 11, and when I use effects the footage ends up speeding up, repeating itself, and just not staying the same as it originally was. Does this have to do with what type of footage it is. I am using screen-captures that I got when using Bandicam. If anyone could help me with this problem, it would be greatly appriciated, thanks.

Gamerwalk,
One option would be to convert your odd AVI-MPEG file to DV-AVI, which is what PrE loves most. This FAQ Entry will give you some tips on doing that: http://forums.adobe.com/thread/415317?tstart=0
I use an older file conversion program, DigitalMedia Converter 2.7, but it is NOT freeware. Also, Deskshare, the publisher, has released newer versions.
Good luck,
Hunt

Any pre keyed effect sites that work with adobe premiere elements 11?

I have been trying to find a legit non scam/virus site with pre keyed effects like explosions, gunshot fire, fire, and other effects like that.
Most sites that I've tried are virus' or only work with imovie.
Anyone know of any good sites that have pre keyed effects that works with adobe premiere elements 11? (they don't have to look good, I am just practicing with those)

In my book "Cool Tricks & Hot Tips for Premiere Elements 11", I recommend and show you how to use clips from the wonderful site http://detonationfilms.com/ to create explosive effects.

Adobe Premiere Elements 9 Effects

I have and am using Adobe Premiere Elements 9. I want to use certain effects in my videos, but don't want them there throughout the whole course of the video. I just want them there at certain point's in the video. I am not sure how to do this and cannot find any information on it. How do I do this?

The Keyframe route is the one that I use most often, but some Effects are not Keyframable. In that case, there is an easy way to address the placement of an Effect on just one segment of a Clip.
Say that you have a Clip that runs from 00;00;00;00 to 00;10;00;00, but only want an Effect from 00;05;00;00 to 00;07;00;00 - so it will ONLY be there for 02 minutes. Place the CTI (Current Time Indicator w/ the red Edit Line) at 00;05;00;00, and hit Ctrl-K (or use the Scissors/Razor Tool) to Cut that Clip. Now, move the CTI to 00;07;00;00, and repeat. one now has a 02 min. Clip created from that "master Clip." Apply the Effect to that 02 min. segment (let's call it a Sub-Clip for this discussion, but there are other meanings for the term Sub-Clip.) Since this Effect was one that we could not Keyframe (in our example), right now, one would jump from having no Effect to having the full Effect. Might be OK, but probably not. Just add a Cross-Dissolve where you made those Cuts, and the Effect will Dissolve in, then Dissolve out.
Good luck, and where possible, do use the Keyframes, as they offer so much more control - just remember that that will not always be possible. The above method is sort of the "poor-man's Keyframing."
Hunt

Pleasantville effect Adobe Premiere Elements 12

Is it possible to edit a video in Pleasantville effect with
Adobe Premiere Elements 12 .
If not, what software does?

https://www.google.com/#q=Pleasantville+video+effect&undefined=undefined indicates that is for Apple's Final Cut
You might try asking the effect's author if they have a version for Premiere Elements

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Adobe Premiere Elements 0.9 project crash, HELP!

This is the first time I am using these forums, so I hope I posted this in the right sektions.
I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
I have also read through and tried some things from this Help/Troubleshoot page:
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
In either cases, I need help with this. Please, help!

Thanks so much for your reply, Steve!
Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

How many cores can Adobe Premiere Elements 12 utilise on a CPU?

I am looking into purchasing 1 of 3 different products right now and Elements is one of those with others being competitors. Due to Elements not utilising OpenCL or Cuda increased rendering speed, other software looks like a better solution. However, the ones I am currently looking at only use up to 4 cores. The processor I am looking at is the Intel 4930k 6 core processor, will Elements utilise all cores effectively? Also I have heard Elements runs poorly on Windows 8.0 and 8.1 as compared with 7.* . Is this the case?
-Best Wishes, A

ABane
This is not Adobe. Just a user to user forum where some of us do not have 6 core processor. to give you a first hand answer and and all of us do not have access to Adobe Engineering support documents that are not typically seen online. We visit here on a non scheduled basis, so a posted thread does not activate an instantaneous reply process.
If you want an Adobe answer to your question, you might click on the following link, and, when it opens, click on the statement
"Still need help? Contact us." in order to bring up Adobe Chat for the topic of "Downloading, Installing, and Setting Up".
Contact Customer Care
Interesting, it looks like a new format for the old link. But, let us see how effective it is with this new format.
Premiere Elements 12 should be able to use 4 cores. Probably 6 cores for encoding, but I cannot give you the definite answer.
Supported devices | Adobe Premiere Elements
I can tell you first hand, Premiere Elements 12/12.1 runs well on Windows 7 Professional SP1 64 bit, Windows 8 64 bit, and Windows 8.1 64 bit.
And these computer are using dual core processors.
ATR

'serious error' when creating a new project in adobe premiere elements 10

Hello,
I saw similar questions on the forums but not quite what is happening with me.
First off I should say i've never had this working however the copy of premiere elements 7 we had worked perfectly fine. I am a technician in a school and i'm trying to install the software for the students (we have lots of lisences). The software appears to install perfectly fine and the launcher works. I click to create a new project (or open an old one) premiere appears to load up correctly. It only crashes once I click to browse for a location to save the file.
The error message says, as i've noticed seems to be a generic message for any error on premiere: "Sorry, A serious error has occured that has caused Adobe Premiere Elements to shut down. We will attempt to save your current project"
At first I thought this was student user rights (as students do not have access to C:\) however I have since tried it with my own admin account which has full rights and effectively should be able to do anything and it still continues to crash.
The stations I am working with are:
Operating System
MS Windows XP Professional 32-bit SP3
CPU
Intel Pentium E5200 @ 2.50GHz
Wolfdale 45nm Technology
RAM
2.00 GB Dual-Channel DDR2 @ 400MHz (6-6-6-18)
Motherboard
Intel Corporation DQ43AP (CPU1)
Graphics
PLE2008HDS (1600x900@60Hz)
Intel(R) Q45/Q43 Express Chipset
Intel(R) Q45/Q43 Express Chipset
Hard Drives
156GB SAMSUNG SAMSUNG HD161GJ (SATA)
Thanks in advance to anyone who can provide some insight on this matter
~ Ash

These previous discussions are not necessarily about PreElements, but they are about problems with trying to run on a network (which no flavor of Premiere is designed to do)
http://forums.adobe.com/thread/851602?tstart=0
http://forums.adobe.com/thread/771151?tstart=0
http://forums.adobe.com/thread/858977?tstart=0

Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

Molnar are you receiving that error during the download or install process? Also which operating system are you using?

Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac?

Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac? If not, what are the alternatives?

JimbobT
ChromaKey, GreenScreen Key, and BlueScreen Key are not included in Premiere Elements Mac.
Some suggest Videomerge as the alternative. I do not. But Videomerge is not THE alternative.
Instead, I prefer the Difference Matte as a substitute for the 3 absent keying effects. Please check out my blog post on that which includes
the how to.
http://atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
The suggestion has met with good results according to the feedback that I have gotten to this.
I am strictly a Premiere Elements Windows user who does not prefer Videomerge even in Windows.
Please review, consider, and let us know the outcome.
Thanks.
ATR

Adobe Premiere Elements 12 will launch and then vanish

Okay so just bought Adobe Premiere Elements 12. Loaded it up and went to run it. First time I ran it I get the Adobe Premiere Elements 12 Launch pad, you know where you select the Organizer or the video editor. I select video editor, it gives me a sub menu asking if I'm opening an existing Project or a new project. I select new project. the Video editor opens and I get a pop up windows stating "Please Log-in with an Admin account to access Adobe premiere Elements." I hit 'ok' and the video editor promptly vanishes leaving me at the launch pad which I close. I go to the short cut, right click on it and select "run as administrator." and I re-launch the program. Back to launch pad, select video editor, select new project. The video editor loads and appears to be working for about 3 seconds and then it vanishes. No error window, no crash report nothing. Just 'pop' it's gone.
Any idea what I can do about this? I'd really like to use the software I just bought.
Compute specs:
OS: Windows 7 Home Premium
-updated system drives yesterday
Prossessor: AMD Phenom 2 X6
8Gb ram
NVidia GeForce GTX 460 4GB card
-Drivers updated yesterday
Primary drive is a solid state 128gb
2 secondary SATA drives at 1TB each
Premiere Elements is loaded on the 1st of the 2 secondary drives.

Please confirm...
a. Are you running the program from a User Account with Administrative Privileges as well as the Run As Administrator from the right click of the program's desktop icon?
- I am running it from an admin level account.
b. Did you install the program to the default drive C location...you mention "Premiere Elements is loaded on the 1st of the 2 secondary drives", but is it the drive designated C?
- No. all I have on my primary drive (C:\) is windows, drivers and scratch disk. All my programs outside of windows are loaded on the drive designated J:\
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
- I did not before, but I just updated it before responding here. No effect.
d. Does your computer use just that NVIDIA video card/graphics care? Is there a second card displayed in Device Manager/Display Adapters?
- the NVIDA GeForce GTX 460 is my only video adapter.
e. Does the problem exist with and without antivirus and firewall(s) disabled?
- Yes. I shut off Kaspersky and tried running the program via the launch pad. no change.
You say that the crashes occur when you select Video and new project. What happens if you select Organizer instead? Still crash?
- If I go into Organizer the system seems to run fine. I loaded Organizer about 20 minutes ago and it's still up and running just fine. But in that same time span I've tried to launch premier elements several times. It still crashes after a few seconds.
New data though. Can't tell if it's from Premier, or something else. a couple minutes after the latest attempt to run Premiere Elements I found a new window with the header "CAHeadless Debug Event". The Window reads:
CAHeadless has encounter an error.
[..\..\Src\Sequence\Sequence.cpp-2233]
and then I have a button that reads "Continue".

Zoom and Pan for Adobe Premiere Elements 12?

I have Adobe Premiere Elements 12. I would like to zoom and pan into a video, but without that slow zoom in/out effect. Basically, I want it like a quick cut close up then back to the original size. I've been trying but nothing seems to work. There's that slow zoom in/out every time I try to get a quick cut in and a quick cut out. Does anyone have any ideas to get this? Thanks

nbovell94
Please check into the details of the Premiere Elements 12 Pan and Zoom Tool. I think that you may be overlooking your opportunities for what you want with that tool, namely, the "Hold" set and the "Pan Time" set and combination there of.
Please see
Adobe Premiere Elements 11 * Pan and zoom to create video-like effect
Please review and consider and then we can discuss this further if necessary.
Thanks.
ATR

Adobe Premiere Elements 10 running sub-par or not?

I am new to Adobe Premiere Elements 10 and I have a lot of questions after using it for the past 4 days and getting aquainted. First off here are my system specifications:
HP Model h8-1214, 10GB PC3 10600 DDR3 SDRAM, 1.5TB hard drive, AMD FX 6100 6 -Core processor, AMD radeon 7450 HD graphics, Windows 7 64 bit.
This is supposed to be a top of the line computer and I was told it could handle video editing without any issues or hold ups after all best buy does not even carry higher end models then this one. I am currently working on two projects the first is a re-edit of 1 hours worth of Mini DV footage already edited in windows movie maker. The other is a 3 minute compilation of videos off my ipod nano. All the video files are stored on a 500 GB Toshiba USB 2.0 external hard drive. I have to say I am already experiencing hang ups, slow load time, NOT RESPONDING, and choppy footage when entering effects and titles. Also just as a test I initially put 1.5 hours of 960P high deff footage off my GoPro and threw in some effects, transitions, and menu options to see if Adobe and my computer could handle it. It did ok but it took almost 2.5 hours just to render and burn a single DVD.
I am used to similar crap on my wifes 400 dollar laptop but what do I have to buy for this thing to get it to just not stutter and work right. I am very angry at this point since I was excited that I could finally get a computer and not be held back by poor performance as I have been in the past. Any advice would be appreciated.

Finding out exactly what is inside your video files will help you determine the correct settings
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
>thought it would work like an up-convert to higher resolution
No, you need to create a project that matches what you are editing

Adobe Premiere Elements 9 - Mosaic Effect

Similar Messages

Maybe you are looking for