Adobe Premiere Pro CS4 - Export issue.

Hello to the Adobe Community!
Maybe someone here can help me out with some Premiere issues.
I am using Premiere Pro CS4 4.2.1.
I'm on Windows 7 64 (Ultimate N).
My system is:
Intel Core i5CPU [email protected]
3GB RAM
I have updated all Adobe software, and my drivers.
I've had a good look over the forums and I found this article. It's very useful, and hoping it would be my saviour, I went through all the advice given.
Still no luck!
I'm trying to export the media from Premiere to Media Encoder.
My sequence settings are:
1280 x 720
Square pixel aspect ratio
25fps
48000HZ - Stereo
My render settings are:
MPEG2 - DVD
PAL HIGH QUALITY
Everything else is left to the default setting.
When I try to encode via the Media Encoder, it gets to about 1/3rd of the way through and I get a message:
'Encoding Failed
Error compiling movie.
Unknown error.
I have also tried, as per previous posts, to use the Adobe Dynamic Link, both from Premiere out to Encore, and importing in from Premiere when I'm in Encore.
Still no luck! I get an 'encode failed' message when I try to transcode it. I'm pulling out my hair with this one.
Can anyone shed any light on this?
NB: This is my first post on this forum, so apologies if I have missed anything out.
Thanks in advance for any advice,
Em.

Thanks everyone for your help and suggestions - Evan I think you might be right on the memory issue.
I tried one last thing - running Premiere in compatibility mode as an administrator.
Again, it failed after about 7 minutes. It's quite a complicated project, but it's only 14 minutes long.
The strange thing is that although it doesn't seem to render on my work pc, it renders on my home pc, which has similar specs:
CPU: Intel Core i5 760 2.8GHZ 8MB
MEMORY: 4GB (2x2GB) PC12800 DDR3/1600mhz Dual Channel Memory
MOTHERBOARD: Asus P7P55-M Intel P55 Chipset
NVIDIA GeForce GTS 450 1GB
I forgot to say that my work pc, listed above uses an NVIDIA GeForce 8800 GT card.
Do you think that 1GB can really make all the difference?
Sorry if that's a stupid question, I don't have a massive amount of technical knowledge.
Cheers!
Em.

Similar Messages

Adobe premiere pro CS4 quality issues

Hi there,
i've been struggling with this issue for a while,.
i hope that someone here can help me out!
I am making a promoting movie for a dance school here,
but as i am editing i have to use automatic quality because when i set the preview on high it will stutter,
that's not even the problem because thats only a preview
but when i try to export it,
it makes the quality really bad,
in previeuw i can read whats on the screen
and now there are A LOT more pixels, making the text unreadable,...
this is really freaking me out
i've attatched a file of a screenshot so you guys can see what i'm talking about.^^
i've been trying exporting all kinds of ext like avi,mpg,HD,H.265 etc etc..
Please help me 0_o

To add to Eddie's recs. I suggest doing ALL of the scaling/re-sizing outside of the NLE. I've found that the algorithms used in Photoshop are superior to those in Premiere (through CS3 - do not know if CS4 improved these). The quality difference should be noticable on critical viewing. Re-sizing BEFORE Importing, also reduces the workload on the NLE. Just a few Acitons in PS, and you can batch re-size your entire load of stills.
I take Eddie's advice for the vast majority of my still images, and if I need to pan on a zoomed out image, will re-size that/those up to exactly what I need, above the frame resolution/size. The majority do go with exactly what the Project Presets are.
Good luck,
Hunt

Adobe premiere pro cs4 capturing issue.

The camera that I have is a sony hdv cam £1200, my pc is a quad core system with a firewire port on the back of the motherboard (new system). My friend who used it previously used it on his apple mac and had no problems in capturing. This is the first problem, I plug in the firewire cable with no notification of new hardware installing(dont know if there usually is). I load up cs4, hit F5 and it states that the device is offline. The settings on the camera, as far as i can see, are all setup aswell as well as the preferences on premiere.
Thanks for reading and if anyone can shed some light on this then thanks!

Welcome to the forum.
I'd suggest starting a new thread, so as to not get folk confused on your particular system and issues. Heck, I have trouble not being confused with but one system.
When you do post, the more info that you can provide, the fewer questions that will be asked. This ARTICLE will give you some tips. In your case, you would add all necessary info on your camera too.
Good luck,
Hunt

Adobe Premiere Pro CS4 Exporting Problem

I recorded a video in 720p, 1280HQ at 30fps, PAL. I then imported these clips onto my pc as MP4 files.
I converted these MP4 files to AVI files using a MPEG4 codec.
The sequence I used of Editing Mode P2 720p 60Hz DVCPROHD.
I need to export my finished project as a Quicktime file using a H.264 codec (16.9) 640x360.
Everytime I try this Adobe Media Encorder encodes the audio only, no video.
Can anyone help?

I can't avoid Quicktime if I can help it at all.
I'm not sure about the PAL thing. My camera has two options for "Video Out!, PAL and NTSC. I'm fairly sure the videos weren't recorded as PAL because they were 30fps.

Adobe premiere pro cs4 audio issue.

Whenever I import a full movie i.e Predator, Halloween 2, Total Recal, the video is fine but the audio is missplaced and doesnt import the full audio that comes with the video. It starts playing the audio but is heavily out of sync and only imports a certain amount of the audio with still a fair huge amount of audio missing.
Thanks for reading and if anyone could help then it will be much appreciated
Thanks

Welcome to the forum.
This is common with muxed MPEG source files, like from VOB's. Also, there could well be copy protection on those commercial titles, that will mess things up too. I will not get into the © issues here. This ARTICLE will give you some background on VOB's, and make suggestions for ways to address their Import.
For OOS, this ARTICLE will give you tips on fixing it.
Good luck,
Hunt

Adobe Premiere Pro CS4 Exporting Trouble

Hey guys, I have been having trouble whenever I export my video. I have a video all set up, ready to export (all rendered) and
it doesn't matter what format, file type, size, quality, or anything, it just keeps doing this:http://www.youtube.com/watch?v=Fb2qt3XHFhI
It seems like some of the clips aren't loading correctly, or something.
Help would be appreciated. I just need this done, and I have no clue why it is doing this.
Thanks!

This looks like it could be the problem. The thing is though, I exported it once, and I had no trouble at all. It just seems odd to me. But the time remapping is just like,
Time Remapping- Speed 100.00%- Velocity 100.00 / second
So should I just create a new sequence, with the settings such as "AVCHD - 720p - AVCHD 720p60" ? or should I have the frame rate the same as the clips?
If you have google talk, we can use that, it would be a lot simpler than doing this, and would provide faster help. [email protected] is mine.

Adobe Premiere Pro CS4 Cannot Export to Encoder Cannot find Updates

I am trying to export my movie from Adobe Premiere Pro CS4, I get a window that reads: An Adobe Media Endocer update is available for this version of Premiere Prol To download the latest update, please run the Adobe Updater from the Help menu or visit htt://www.adobe.com/downloads/updates. When I go help menu and select updates, It only comes back with the Adobe Reader 9 update. When I visit http://www.adobe.com/downloades/updates I cannot find the update anywhere, all updates seem to be for CS5.
Everytime I have used this program in the past the Encoder programs opens automatically when I export from Premiere Pro. But not anymore.
When I open Encoder then open Premiere Pro and export my movie, It loads into Encoder but I get these two error readings. Microsoft Visual C++ Runtime Library, Assertion Failed! Program:... File:..\GUI\Editor.cpp, Line: 391, Expression: false, For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts (Press Retry to debug the application - JIT must be enabled
When I select retry, I get another window that reads: PProHeadless.exe has stopped working, A problem caused the program to stop working correctly, Windows will close the program and notify yoou if a solution is available.

What Adobe products do you have installed? Production Premium or ?
What you did puts the file into the ame queue, but does not actually export it.
Can you open ame? Start -> Programs -> [adobe program group] -> Adobe Media Encoder

My Adobe Premiere Pro CS4 wont export properley.

Im running Adobe Premiere Pro CS4 on my Windows Vista & everytime I try to export my video something goes wrong. When I go to export, it opens Adobe Media Encoder & starts encoding it, but most of the time it will jus stop encoding. Even the elapsed time stops ticking. & I know it isnt the program freezeing up because I can still click the icons and even cancel or add new files, and it isnt just running slow because ive left it for 4 hours and it made no progress at all. A few times it has finished but the video gets screwed up. Like once a certain effect didnt show up, & both times the clips got screwed up & jus flashed green & repeated with the audio stillplaying fine. The only thing I can think of is it's the fact that Im running Vista or that the video has 117 items imported. Please help, Im at wit's end.

Alright, my computer is a Windows Vista. My processor is AMD athlon(tm) Dual Core Processor 4450e 2.30 GHz. I have 3 Gigs of memory (RAM), and it's a 32-bit Operating System. I have 2 harddrive Disks, the C drive (85.6 GB free of 112 GB) and a "FACTORY_IMAGE (D:)" with 1.53 GB free of 11.2 GB, but I think the D drive is just for recoverey, it came built in with the computer. My virtual memorey says it's saving on the C drive and has "Total paging file size for all drives: 3241 MB". I close all other programs besides Adobe Premire Pro CS4, and Adobe Media Encoder when encodeing. Ive also tried running just Media ENcoder with same results.
The video files I have uploaded are .MP4 and .FLV. Ive uploaded MP3 files for some of the sound clips and PNG for some still images. Like I said before I have 117 imported files. Also my video is 7 minutes and 44 seconds long.
Now my problem has never accoured in the same place in the video. It seems to be spontanious. For example I tryed to export it the first time and it encontered an "Unknown Error" this was at a minute and a half of encoding the video. Then the second time I tryed to encode it it worked all the way through, but when I went to play the file it played just fine up until a point. then a series of clips began to flicker and play the wrong clips, some times from a scene that happened just previously to the clip before and also flash green. The audio stayed the same though. After the clip finished and another clip began to play it worked fine. Then I tryed to encode it a third time and this time it simply stopped encoding. Like I mentioned earlier the program or my computer never froze it just stopped encoding and the timer stopped. This happened a few more times before it finished encoding it again, but the same problem happened with the skipping, playing the wrong clip and flashing green while the video progressed, but this time it happened at a compltetly different part. For exaple the first time it happened about 2 minutes into the movie and the second time it happened about 5 minutes intot he movie.
When while I was making the video randomly the flickering of wrong clips and green flashing accourded when I would played a scene, now by just restaring premiere the problem would go away and the scene would play just fine. But this only happened in editing maybe 3 times. Unlike when I was encoding where it happens everytime the program finishes.
I hope this was enough info, if Ive missed anything please tell me.

Adobe Premiere Pro CS4 4.0.1

An update to Adobe Premiere Pro CS4 will be available via Adobe Update Manager shortly. The file will also be available for download tomorrow (November 20) on Adobe.com, as will the readme (at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html). In the meantime, here is the text of the readme.
We're really excited about this update, especially considering we released CS4 just one month ago. To force an update, choose help --> find updates from any Adobe application. The AME update that releases with this update is required as well.
Important note: if you are using the Elemental Technologies RapiHD plug-in, you must update to the latest version in order to use Adobe Premiere Pro CS4 4.0.1. You can update the plug-in by visiting the Elemental Technologies web page: http://www.rapihd.com/?q=node/129
New in this release
- OMF export
- Final Cut Pro import
- Edit in Audition (Windows only)
- Surcode support
- AAF import and export
- High quality motion
- Third-party support
Notable fixes
- Attempting to trim locked tracks results in a crash (#1888355)
- Crash on Win and error on Mac when using Numpad-Asterisk keys to generate marker when
playing in Program Pane when Effect Controls pane is closed (#1890626)
- Crash when the Metadata panel is brought into focus when a DVCPro HD clip is selected
(#1884633)
- When a filter/search is applied in the Metadata Panel and then a different asset is selected, the
filter does not update (#1876954)
- Custom schema causes Adobe Premiere Pro to crash performing many basic operations,
starting with New Project (#1888938)
- Render of transition in imported EDL-based sequence fails; on Mac, causes application to hang
indefinitely, user must be force-quit application (#1873434)
- After ASND is saved, an effect is always ON if it turns OFF while playing (#1864978)
- Crash when attempting to load a project that contains a composition if headless Adobe
Premiere Pro is serving Adobe After Effects (#1871578)
- Exporting video as MPEG 4 will create a video file that imports at the incorrect length
(#1851063)
- Trimming both ends of a clip, then moving the clip will cause looped playback to be silent, or
only playback portions of the clip (#1868409)
- When exporting a timeline containing cuepoints, deleting a cue point via AME Batch-> Export
Settings, the cue point is still present in the output file (#1866690)
- Playing an audio-only file in the source monitor will cause the application to lock up (#1887330)
- Exporting any MT session as 24bit WAV leads to garbled audio Mac only (#1881684)
- Adobe Premiere Pro allocates too much memory and reads too much data from disk when
loading project files on the Mac (#1890579)
- With camera connected, opening clip from Timeline into Source and selecting File  Debug
results in a serious error (#1889197)
- Export to tape is active from DVCPRO HD sequences (#1863718)
- Application intermittently crashes when exporting a movie (#1868405)
- Render and Replace of offline clips takes over 20 minutes (#1885273)
- Application crashes when cancelling Normalize Audio Track dialog (#1887615)
- When an AVCHD clip is inserted into a DV timeline with Scale to Frame Size applied, rendered
previews of the clip show artifacts during Timeline playback (#1863988)
- Using scale to frame size in a timeline lowers output quality and softens detail and sharpness;
typing in scale attributes manually or using Adobe After Effects produces much better results
(#1527669)
- Multiplexed MPEG files exported to HD size and then imported back in to Adobe Premiere Pro
show up as 601 color space instead of 709 color space and hence the colors of the imported
files are off (#1852977)

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

Can I import I-life files into Adobe Premiere Pro CS4?

Okay, so not exactly an Apple question, but there are so many smart, helpful people on here, and the Adobe forum doesn' t seem very active.
I recently got Adobe Premiere Pro CS4 (the movie editing software). I tried to import files from I-photo, but those folders wouldn't even open. Tried to import files from the movie folder, which were in .mpg format, but got a message that it is an incompatible format.
Those were just simple movie files taken with a small digital camera. Does anyone know how I could use this footage in Adobe Pro? I have access to other Adobe software as well, perhaps there is a way to convert the files? If I try to import something to Adobe from I-movie, should that work? Or from I-DVD? Also, is it possible, with Adobe or regular Mac software, to import regular DVD footage (that is not in form of a computer file, but just something that plays in your DVD player) or perhaps convert it into a computer file? I have some old VHS footage that was copied onto a DVD and would like to edit it, or at least have it on my computer as a file.
Also, if I can't use those files, are there any places on the internet where one can download some simple footage to try out in Adobe? I'm new to it, so I'm just trying to get some files together so I can try out how it works.
Lastly, if anyone knows of a good online tutorual for CS4. It's an older version, and on the Adobe site they only have tutorials for the newer one.
Thanks!

This is a forum. None of the users here -at least not to my knowledge - are Adobe professional
Ninety-nine point nine percent correct. We are blessed with a few Adobe employees here, unlike some fora, but those folk are probably at NAB right now. Also, they are in other departments, so would have to walk "down the hall," or make a call, just as we would.
When it gets to issues on licensing, installation, etc., we're pretty much at a loss. Most of us have never encountered such issues, and only know what we have read in others' threads, when they have bothered to report back. Even then, that is third-hand info.
Last time that I had an Adobe installation issue was AI 3, IIRC. My upgrade version did not have the old database of S/N's. Mine was 00-000-003, and things had changed drastically. One call to Adobe, and a total time of about 5 mins. (including hold time), and I was given a number to plug in, and then everything installed perfectly. That was in about 1989, so is not quite contemporary. Still, that is the last and only first-person account that I can offer. Most here have zero personal experiences, as they came to the party later, and have just not had any such issues.
We'd love to help, but just do not have the experience.
Good luck,
Hunt

Why cant I install Adobe Premiere Pro CS4/Encore ?

So a while ago , my encoder for PP stopped working, so I uninstalled everything today, and I re-downloaded the Premiere Pro trial version - but when I install it , after about 3 min it says that it couldnt install Adobe Premiere Pro CS4 & Encore.
when I press the more information botton it shows me a pop-up with this text:
Adobe OnLocation CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Premiere Pro CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Dynamiclink Support
Fel:
Error 2.
Adobe Extension Manager CS4
Fel:
Error 2.
Adobe Media Encoder CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Media Encoder CS4 Additional Exporter
Fel:
Error 2.
Adobe Output Module
Fel:
Error 2.
Photoshop Camera Raw
Fel:
Error 2.
whats wrong?

I'm not sure that I am getting everything from your post.
my encoder for PP stopped working, so I uninstalled everything today, and I re-downloaded the Premiere Pro trial version - but when I install it , after about 3 min it says that it couldnt install Adobe Premiere Pro CS4 & Encore.
Did you have the full-paid version originally, or the "trial?"
If you had the full-paid version, why did you download the trial?
If you had the trial, it does stop working after a period of time - it is limited that way. If you had the trial, you can never install another trial on that machine. It's a one-time deal.
If you did have the trial, you will want to not only uninstall it, but also run the Adobe CS4 CleanScript a few times, before you attempt to install the full-paid version, or you WILL have problems.
Let us know exactly what you had, and what you wish to do now, and someone can help you.
Good luck,
Hunt

Premiere Pro CS4 export problem

I am a new user of PP CS4 and I have created a short 2 1/2 minute clip with no problems.
I have selected all the appropriate setting as per Adobe PP CS4 "Classroom In A Book" instructions.
Exporting the clip as a MPEG2-DVD, NTSC 720x480, 29.97 Drop Frame Video.
Main Concept MPEG Video, Variable Bit Rate.
However, when I go to export I get the following error everytime:
Adobe Media Encoder CS4 quit unexpectedly.
Here are the details of the error report.
Process:         Adobe Media Encoder CS4 [242]
Path:            /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app/Contents/MacOS/Adobe Media Encoder CS4
Identifier:      Adobe Media Encoder CS4
Version:         ??? (???)
Code Type:       X86 (Native)
Parent Process: Adobe Premiere Pro CS4 [202]
Date/Time:       2009-11-14 15:13:02.554 -0800
OS Version:      Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report:          1206 sec
Crashes Since Last Report:           1
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      B5DD95EC-13C1-4BA5-819F-22AA7BBBB3C8
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/LogSession.framework/Versions/A/LogSession
Referenced from: /Applications/Adobe Media Encoder CS4/Adobe Media Encoder CS4.app/Contents/MacOS/Adobe Media Encoder CS4
Reason: image not found
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0x24300000
USB Device: Blue Snowball, 0x074d, 0x0005, 0x24320000
USB Device: Hewlett Packard ScanJet 5300C/5370C, 0x03f0 (Hewlett Packard), 0x0701, 0x24340000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0x24310000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x26400000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0x26420000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x06200000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
Can anyone help me with this?
Richard

Welcome to the forum.
Looks like you are on an iMac. To help others help you, can you post the specs of your system?
I was about to post links to a bunch of troubleshooting articles, but they were written for PC's so I dobut that any would apply here.
With the important data, someone is very likely to see a potential problem and help you.
In general terms, most problems sort out this way:
System
Assets
Project/Sequence settings
Those given, the exact detail will get you closer to resolution.
Good luck,
Hunt

Movie Clip in swf won't show animation in adobe premiere pro cs4

Hi, I am new to this forum and as well as a beginner user of adobe premiere pro cs4. I am recently making a animation using Adobe Flash CS5, I've been using movie clips symbol to create all the movement of the character, background and stuff. Unfortunately, swf movies exported from Adobe Flash CS5 do not show any animation at all in Adobe Premiere Pro CS4. I have to use movie clips symbol instead of graphic symbol because filters can be added to a movie clip symbol but not graphic symbol. Is there any way to help making the movie clip symbol to be shown in Adobe Premiere Pro CS4? Your help is much appreciated.

Check Flash help in the "video" section, specifically "moving content between" PR and FL. (I was looking at CS4, but it must be there in CS5 help as well.)
Your movie is to be watched on a TV? I would do this in After Effects. because you'll lose most of the flash functionality once you go to video anyway,

How can I download the trial version of Adobe Premiere Pro CS4

Can anybody tell me how can I download Adobe premiere Pro CS4 trial version for windows 7 English.

This is a forum. None of the users here -at least not to my knowledge - are Adobe professional
Ninety-nine point nine percent correct. We are blessed with a few Adobe employees here, unlike some fora, but those folk are probably at NAB right now. Also, they are in other departments, so would have to walk "down the hall," or make a call, just as we would.
When it gets to issues on licensing, installation, etc., we're pretty much at a loss. Most of us have never encountered such issues, and only know what we have read in others' threads, when they have bothered to report back. Even then, that is third-hand info.
Last time that I had an Adobe installation issue was AI 3, IIRC. My upgrade version did not have the old database of S/N's. Mine was 00-000-003, and things had changed drastically. One call to Adobe, and a total time of about 5 mins. (including hold time), and I was given a number to plug in, and then everything installed perfectly. That was in about 1989, so is not quite contemporary. Still, that is the last and only first-person account that I can offer. Most here have zero personal experiences, as they came to the party later, and have just not had any such issues.
We'd love to help, but just do not have the experience.
Good luck,
Hunt

Differences between adobe premiere elements 8 and adobe premiere pro cs4

I'm planning to download either adobe premiere elements 8 or adobe premiere pro cs4, but first would like to know their differences in regards to features that best suits me.

I'd recommend posting to the PrE forum, per John's suggestion. The reason for that is you will get more background on PrE there, and few users in the PrPro forum know much about PrE.
In very general terms, here are my observations:
1.) PrPro handles everything by hand, while PrE is a "big-button" program, and much is done automatically, or semi-automatically.
2.) With that hand-work comes great power and PrPro offers so very much more, than does PrE.
3.) Export options are much broader in PrPro.
4.) PrE offers a semi-automatic, limited DVD/BD authoring function, while PrPro comes with Encore, a very versatile full-featured authoring program. Little in Encore is done automatically, but one has so much more control over the Project.
5.) PrPro allows one to edit with Sequences, which can have different types of source footage, one for each Sequence. In PrE, one can only use one type of source footage, or they have to manipulate one, and have the Project set to the other.
If one wants things simple and easy, PrE is the choice, as it has a lot of Presets and does a lot of work behind the scenes, and is a complete package. If one wants control, and does not mind doing things by hand, and using Encore for authoring, then PrPro will allow that control and provide much more power.
Good luck,
Hunt

Adobe Premiere Pro CS4 - Export issue.

Similar Messages

Maybe you are looking for