Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note:  The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever.  This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again.  So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Similar Messages

  • Premiere Pro CS6 Dynamic Link not working

    Hi,
    Just wondered if anyone has seen issues with the Dynamic link options in Premiere Pro CS6, all the options to work with After Effects are greyed out although this product is installed.
    However I only have CS5 for after effects, is this a compatibility issue or am I doing something wrong here?
    Thanks in advance for any assistance.
    Kind Regards
    Steve

    Dynamic Link only works within one version, so you can't use it between CS6 and CS5 or CS5.5 and with older versions you had to have a complete suite, not individual products.

  • Adobe Premiere pro CS6 effects presets not working

    Presets in my Adobe Premiere pro CS6 is not working. What can I do? I need Work with Effect Presets
    Message was edited by: Kevin Monahan

    What do you mean "not working"  What's not working?  What are you wanting to do?
    More information please.

  • Adobe premiere elements trial download link not working

    can anyone download the trial version? the golden yellow download button is frozen whenever I try to download premiere elements,
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=en_us

    actually, note to other downloaders, when this screen below pops up,
    click the link at the top of the pop up downloader to install Akamai downloader,reads : dont see the installer? try reopening it ( you click that link in the download pop up
    I was only able to download 252mb of a 1.2 gig file, then had to restart the download the next day because I had used the direct links for file 1 and 2 at the bottom of that initial pop up as can be seen by the two download windows to its right, if you need to resume your download because of lost internet connection or time reasons you`ll have to start again,,
    however once akamai has installed automatically, or you downloaded and installed manually, you`ll get this download window when you attempt downloading premiere elements 8 (or any other adobe software).
    once the download is complete a golden yellow tab will read "install now" in the akamai downloader window,
    unfortunately for me I received the following error on installation, even if  trying to install to different folder I get the same error,
    trying to manually open the file gets me this error
    so far this has been a breeze,
    using win7 64bit. quadcore. HP pavillion laptop. shouldn`t matter

  • Why Does Dynamic Link Not Work

    I purchased the CS5 Adobe Production Premium.  I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere.  When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
    Adobe Dynamic Link Requires Adobe Production Premium.
    Since I own production premium, I do not know why I am getting this message.  I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message.  What can I do to get Dynamic Link Working.

    Thank you for the tip.  Could you possibly tell me how to deactivate and
    then reactivate the suite.  I am using a Macbook Pro laptop running OS
    10.6.4.  I do not even know where to start.
    From:   Colin Brougham <[email protected]>
    To:     Dan Seanor <[email protected]>
    Date:   03/15/2011 09:55 AM
    Subject:        Why Does Dynamic Link Not Work
    Deactivate the software (not uninstall), and then reactivate the suite.
    This often fixes this. You can opt to leave the serial number on the
    system; no need to clear it and re-enter it.

  • "Adobe Premiere Pro 2014.1 has stopped working" Open Project Error

    Hey, everyone.
    I recently tried to re-open a project file that I created earlier today. As soon as it loads, the familiar "Adobe Premiere Pro 2014.1 has stopped working" window comes up.
    I created a new project file and it seemed to work fine. When I first started this project, I was having trouble using a ".m2ts" AVCHD movie file (PPro would crash in a similar manner), so I used Media Encoder to change it to a ".mov" Quicktime file. Seemed to work fine after I did that. This new issue only arose once I tried to re-open the project file after shutting down the computer.
    Got any suggestions?
    -Ross

    Correction - I converted the ".m2ts" file to an ".mp4" file, not an ".mov" file.

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • Adobe Premiere Pro CS6 (mac) will not completely launch.

    After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded  the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

    >did upgraded to Yosemite
    CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

  • Dynamic Link Not Working

    To anyone that can help..
    I am having several issues with adobe at the moment and really need some advice. i have tried adobe themselves, they struggled to help too, but that was mainly down to language issues.
    I have a Canon XHA1S camera with an external shotgun mic Rodeo NGP-2. All of which at some point worked through premiere pro CS5 and encore. i was living the dream.
    Then one day, it all started having issues.
    Problem #1 - Dynamic Link stopped working
    Once my project is done, i would send it to Encore via dynamic link and produce my DVD in either regular or blu ray. Now it doesn't. A box 'import premiere pro sequence' comes up but encore crashes before it can complete the import. sometimes a message telling me "the software thats used to decode the media is not available on this system. installing the correct decodes for the file your working with may help correct the problem" comes up too
    Its strange that i've produced about 20 disks with no issues but now a problem. was told by adobe it could relate to the file/pixel size? but again have no idea why this is now a problem now and not before, in fact i would just be happy to know how to change it so it can work? Can anyone help?
    Problem #2 - Audio
    The only way i am able to make a disk at the moment is to produce it on DVD maker - it's the only way until i get my issues resolved. however my external mic is not coming through, this has something to do with the sound quality to the mic being 44.1 and the DVD maker requiring 48mhz. i can't seem to convert this to work in anything but AVI (would like MPEG-2) but then the picture quality drops to something similar to a tribul rubbing.
    If anyone knows of something or can point me in the right direction i would be very greateful
    Thanks

    Especially for Bluray or DVD that is HD to SD, DL must sometimes be avoided.
    But the type of problem you are having may indicate other problems. If regular projects are not working, see these:
    Troubleshoot damaged projects in Encore on Windows
    http://kb2.adobe.com/cps/406/kb406006.html
    Troubleshoot system errors and freezes | Adobe software on Windows
    http://kb2.adobe.com/cps/822/cpsid_82252.html
    Regarding the audio, can't you just export as 48K?

  • Dynamic Link doesn't know I have Production Premium in Premiere Pro 5.5

    I am having an unusual problem with my new Production Premium suite. 
    I previously had After Effects CS5 and the month-to-month Premiere Pro CS5.5.  When I tried to use Adobe Dynamic Link to bring After Effects compositions into Premiere Pro, I'd get a message saying that feature is only possible with the Production Premium and Master Collection suites.
    I have since purchased the Production Premium suite.  I have uninstalled the earlier instance of Premiere Pro, leaving only the Production Premium one.
    If I wanted to import Premiere Pro sequences into After Effects with the Dynamic Link menu, it will let me.  I don't, though -- I want to import my After Effects compositions into Premiere Pro.  However when I try to do that, I get the same error message I used to about how I need one of those two suites, even though I am now using one of them. 
    Anyone have this problem or know a fix?
    Thanks.
    R

    You were close, though Cleaner only (albeit very completely) uninstalls Adobe suites.
    The problem turned out to be that I had a standalone copy of After Effects previously installed.  There was no way to get CS5.5 to understand that I ALSO had Production Premium.  I uninstalled the standalone copy and it's worked since.
    Thanks.
    R.

  • Adobe Premiere Pro CC 2014 has stopped working

    Today I've encounter an issue with Adobe Premiere Pro CC 2014 where it will crash on launch, with the error statement, Adobe Premiere Pro CC 2014.0 has stopped working. I've tried uninstalling, reinstalling, rebooting, uninstalling and reinstalling graphics drivers, with no avail. I was even connected to a tech support member who was helping me when the program crashed and now I can't reconnect with that member. I'm at a loss of what to do but any help would be greatly appreciated
    My Computer specs are:
    AMD FX-8350 Eight-Core Processor 4.00Ghz
    8.00 GB Ram
    Nvidia GeForce GTX 570 -driver GeForce 340.52 (7/29/2014)
    Windows 7 64-bit.

    A variety of issues can cause PPRO to crash on launch. Here are some of them:
    a problem with the Preferences, or some other pref-related file in the Profile-<USERNAME> bin.
    the graphics driver
    having an integrated graphics chip as well as a graphics card. Disabling the integrated chip often fixes this.
    having Nvidia CUDA drivers installed on a system with an AMD card
    third-party plug-ins
    a problem with the cache files.
    a problem with the project file (if you're loading a project...)
    folders that Premiere writes to being set to read-only
    the user not having administrator rights
    a conflict/incompatibility with some OS setting
    a problem on the licensing/authentication side.
    A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.

  • Adobe Premiere Pro.exe - Entry Point Not Found

    "The procedure entry point AMTRetrievePersonGUIDWithAuthSource could not be located in the dynamic library C:\Program Files\Adobe\Adobe Premiere Pro CC\PrRegistration.dll"
    Any help guys?

    Are you a registered subscriber or a trial user?
    Was this on your first attempt to launch or has Premiere launched successfully in the past?
    Do you have any other Creative Cloud apps installed and, if so, do they launch?

  • Adobe Premiere Pro CC 2014 Will Not Open But other App like Lightroom will..

    Hello,
    Can someone please help with with this problem!?
    I have just purchased Adobe Creative Student Cloud (the full set) and my Adobe Premiere Pro CC 2014 won't open when clicked on... however other App like Lightroom, indesign etc will... Can some explain why this is and help me load it up so i can start editing!
    Thank you,
    George

    if you failed to reset the preferences, do it manually - Adobe Premiere Pro Help | Preferences
    also, make sure your graphics card drivers are up-to-date.

  • Dynamic Link not working AT ALL (CS5.5)

    I've been trying to queue a sequence from Premiere Pro to Media Encoder (both CS5.5), and it says that Dynamic Link isn't working. I tried to make a new After Effects composition with my sequence through Dynamic Link, and it says that I don't have it installed (I do and can sucessfully open it). So, Dynamic Link doesn't work at all. Working on a Mac here. Help?

    It's possible that something (e.g., antivirus software) is blocking the communication that Dynamic Link relies on.
    See this for solutions to a closely related problem:
    http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

  • Encore-Premiere dynamic link not working

    Hi. I've watched tutorials and think I understand this pretty well but it's simply not working. I import a Premiere sequence into an encore project and place it on a timeline. I then add some chapters (or make other changes) to the Premiere sequence and the encore timeline does not update. When I right click on the timeline video the option to "Update markers from source" is grayed out. Saving in Premiere doesn't help.
    Thanks for any help offered. Sorry if I'm missing something obvious, but it's really a damper to productivity.
    CS4 Production Premium, Win Vista Ultimate 64, NVidia GEForce 8800 with latest drivers, NVidia 7600 running a third monitor, Matrox Axio LE card, dual quad core Xeon, 20Gb ram, 5TB free HD space on a raid 0

    >anyone know if that's coming back?
    I seriously doubt it. Adobe bundles Encore with PPro to take care of DVD authoring. It might have been convenient, but I don't think there's sufficient demand for Adobe to consider re-implimenting it.
    Try filing feature requests.
    Cheers
    Eddie
    PremiereProPedia   
    RSS feed)
    - Over 350 frequently answered questions
    - Over 300 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

Maybe you are looking for

  • Problem in Billling doc creation

    Hi experts, When creating a billing doc for service item category "TAD", I have set the necessary copy control from Delivery doc type LF to a billing doc type. But I hit the message, "The doc is not relevant for billing..". Can you let me know if som

  • Bluetooth not working and not appearing in the devices manager

    My bluetooth suddenly is not working anymore and i can't see it in the device manager. I tried to reinstall the drivers but the problem persist. I have one strange USB problem happening too at the device manager, and it just appeared after the blueto

  • About HLD and LLD

    Hi experts,                  Can anybody help me in understanding what HLD and LLD are all about and what is the part of an abaper with respect to a HR ABAP project. Regards, Shanthi.

  • How can I tell what exactly is being distributed from the SCCM server to a client

    Hi, If I know an IP Address of a client machine, is there a way I can see what SCCM is exactly sending to that particular machine at that moment in time? thanks.

  • Create a pamphlet in page layout mode.

    This will be a 32-page pamphlet to be printed on standard American letter size paper and bound on the short side.  How do I set up for this project?