Adobe Premiere Pro cs6 not opening 2 channel audio videos

1,
2.

Welcome to the forum.
I agree with John T., regarding some MP3 material. See this article: http://forums.adobe.com/message/4146900#4146900
If you are having issues, when using Audio, but no Video, you might want to try one of two things:
Create Black Video (from the New Icon), and place that onto Video Track 1. Extend that to cover the music files.
Create Transparent Video (from the New Icon), and perform the same operation.
When you go to Export, just choose Export Audio only, if you want no Video Stream.
Good luck,
Hunt

Similar Messages

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • Adobe Premiere Pro CS6 crashing when importing HDV Video

    For some reason I keep getting crashes when importing HDV (720p60) video into the timeline of Adobe Premiere Pro CS6.  This has happened on two different machines, with similar specs.
    Per the suggested guidelines, here are the specifics:
    Version of Premiere Pro: CS6, Version 6.0.5 (001 (MC:264587))
    All updates have been installed.
    Operating System: Mac OS X 10.8.5.
    Source footage: HDV 720p60 video in .MOV container.
    Full text of error message: "Sorry, a serious error has occured that requires Adobe Premiere Pro to shut down.  We will attempt to save your current project."
    Link to full crash report: http://goo.gl/Gn8Bzn
    Crash occurs when trying to import HDV .MOV file.
    This is a consistent problem when importing .MOV files of this type.
    Complete Adobe Creative Suite is installed.  Also using Episode Pro encoding software from Telestream to prepare HDV video.  No other external video hardware or codecs installed.
    Yes, I am using the Mecury Playback Engine GPU acceleration.
    Thanks in advance to anyone who can help me figure this one out.

    Thanks Mark.  Here is the Media-Info Data of one of the clips:
    File: CHRISTOPHER.mov
    Size: 8.11 GB
    Format: QuickTime/MPEG-4/Motion JPEG 2000 format
    Stream count: 2
    Duration: 00:58:29
    Bit rate: 19841 kb/s
    Meta info:
        creation_time: 2013-12-23 18:51:36
    Stream 0
    Type: video
    Codec: mpeg2video
    Codec profile: Main
    FourCC: hdv9
    Duration: 00:58:29
    Width: 1280
    Height: 720
    Sample aspect ratio: 1:1
    Display aspect ratio: 16:9
    Pixel format: yuv420p
    Frame rate: 59.95 fps
    Bit rate: 18300 kb/s
    Meta info:
        handler_name: Apple Alias Data Handler
        creation_time: 2013-12-23 18:51:36
        language: eng
    Stream 1
    Type: audio
    Codec: pcm_s16be
    FourCC: twos
    Duration: 00:58:29
    Bit rate: 1536 kb/s
    Sample rate: 48000 Hz
    Sample format: s16
    Channel: 2
    Meta info:
        handler_name: Apple Alias Data Handler
        creation_time: 2013-12-23 18:51:36
        language: eng

  • Does Adobe Premiere Pro CS6 not support the Quadro K2000D GPU card?

    I can't get the Premiere Pro CS6 to recognize that Quadro K2000D is installed on my computer.  I'm running Windows 7.  I see in the list that Quatro 2000D and Quatro K2000 is listed as supported but I haven't come across Quatro K2000D.

    If your nVidia card has at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

  • "Adobe Premiere pro could not find any capable video play modules"!!!

    premiere pro cs6  tells me thatit "could not find any capable video play modules" and tells me to update my video display drivers(they are of the latest version - I checked)-. I have AMD RADEON HD 6750 with 1GB dedicated RAM. What do I have to do to make premiere pro cs6 work?

    http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  • Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

    Hello,
    I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
    Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
    Thank you.

    Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?  
    Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing.  Seriously.  Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem.   Premiere Pro Multicam --> Resolve.
    Since we do a lot of multicam work it's something that's important to us.
    Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
    I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far. 

  • Adobe Premiere Pro CS6 constantly crashes when importing video files

    I have not used Premiere Pro in a while, but recently when I tried to import video files (from .m4v, .mp4 and .mov) the program stops working, the "importing" window doesn't progress and I get the rainbow wheel of "death".
    I read some other posts where some are having similar situations and some users suggested moving the file from an external hard-drive to an internal one (I have a 1TB external hard-drive) but that didn't do squat either.
    Once the program is frozen I'm forced to "force quit" the program.
    Does anyone know what I can do?

    I am having the same problems, but my program locks up when trying to playback .MTS files that are shot natively on my GH2.  It will not render or export anything & when you try and scrub or playback footage it gets the spinning wheel of death.  To finish my last project, I had to transcode all the .MTS files to .MP4 files and it worked fine.  Also, anytime I shut down PP, I have to force quit the program for it to shut down.  Here are the detailed info you asked for...
    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).Premiere Pro CC (trial) 7.1.0 - 141 (because I uninstalled CS5, 5.5, & 6 thinking they may be the problems.
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.) YES, up to date
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac”. OSX 10.9
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime”..MTS files from a GH2
    If you are getting error message(s), what is the full text of the error message(s)?It tells me that it is an unknown error (I do not have a copy of the original error message)
    What were you doing when the problem occurred?Trying to playback (wheel of death), Trying to Render and export (starts rendering, then just sits there and then gives the unknown error)
    Has this ever worked before?I have worked on this projects for a few months, then just out of the blue it started with these problems about 1 week ago.
    What other software are you running?none
    Do you have any third-party effects or codecs installed?some from Video Copilot and Plural eyes 3 (NOT used on this project)
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    iMac 27in Mid 2011 3.4 Intel Core i7 16 GB 1333 Mhz DDR3 AMD Radeon HD6970M 2048 MB OSX 10/9 (13A603)
    No external devices, except a external hard drive.  I changed from a Thunderbolt Seagate 1TB (single 7200 RPM) to a Drobo Mini 2 TB RAID 5 in the MIDDLE of this problem, thinking the issue was the drive was to slow to keep up - NOT the case… it still happens with the new drive.
    Are you using Mercury Playback Engine GPU Acceleration?I am not completely sure to be honest - I believe it is the factory settings.
    Does the problem only happen with your final output, with previews, or both?both!

  • Adobe premiere pro could not find any capable video play modules. Please update your display drivers and start again.

    this message keeps poping up and i dont know what to do i already updated the drivers but its dint work what do i do

    I am having the same problem, just out of the blue. Earlier this week Premiere worked fine, today it stopped in start-up while loading windows media and displayed this message.
    I did not change my video drivers, neither to an earlier version nor a newer version. I remember an update for AME got installed automatically, though.
    After a restart of my computer PP worked, closed it and restarted PP. Got the above error. Now even after a restart of the computer PP gives me the error messages.
    AE starts fine, by the way.
    - Version is CS4 Production Premium
    - Language is English
    - Update 4.0.1 applied for PP.
    - Project setting etc. are of no use. It happens before I can even start a project.
    - OS XP-32bits
    - SP-3 applied
    - language Dutch
    - Automatic updates disabled. Did some updating microsoft released latest updates. Removed the one for IE7 as it disturbed browsing (with firefox, which is very particular)
    CPU = Q6600 2,63 GHz
    4GB memory
    Videocard = Gigabyte 9600 GTS silent pipe 3
    Audio is realtekHD onboard of gigabyte motherboard
    Used Harddrives are not nearly halfway full.
    No other capture hardeware than a IEEE1394 onboard.

  • I can´t open Adobe Premiere Pro cs6 trail

    Could you help me solve this?
    "Adobe Premiere Pro could not find any capable video play modules. Please update your video displayy drivers and start agiain"

    My
    OS: Windows 7 Home Premium
    I have a HP Pavilion dv6 Notebook PC
    Monitor:
    Samsung S24B300B
    Drivers: what kind of drivers?
    Thanks / Adam

  • Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

    I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
    Here are my specs:
    Lenovo Ideapad U400
    Windows 7 (64bit)
    Intel i5 2.5 ghz processor
    AMD Radeon 6470M graphics card
    The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

    Update:
    - with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
    - using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
    - Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
    - AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
    - My graphics card is up-to-date as verified by lenovo
    - Intel (R) HD Graphics Card now up-to-date
    - Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
    - when disabled, computer reverts to vgasave instead of Radeon
    - Disabling Radeon does nothing to existing display
    - After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
    - CCC worked after rolling back Intel card
         From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

  • Adobe Premiere Pro CS6 classroom in a book lesson files "file format not supported" error message

    Hey y'all. I have the creative Suite cloud membership and am learning Adobe Premiere Pro CS6 and have the latest update. I have an iMac, version 10.8.2 and have been going through the lessons 1-8 so far from the 'Adobe Premiere Pro CS6 Classroom in a book' with no problems. So far so good. Then, when I opened Lesson 9 project today, I realized that certain media was off line (see pic below-videos and maps) even though I had been able to open the project. I tried to see if it was a link issue but was unable to select the 'Link Media' option and the system did not give me the option to link media when opening a new project. The strange thing is that I am now able to open some lessons with everything working fine but when I try to open other lessons such as lesson 9 or 10 or 11 I notice media files offline after getting the "file format not supported" pop-up error message when attempting to open a project. It's random as some lessons I had opened previously now give this error message of file format not supported when they didn't in the past whilst others work. I have deleted all the lesson files from my hard drive and reinstalled them from the cd onto my hardrive but the issue persists. Any idea as to why all of a sudden Adobe Premiere Pro CS6 is giving the error message "File format not supported"??? when opening the lessons. I have not changed any preferences. I've included some screenshots though I don't know how much help they will be... Is anyone else running into this issue??? Can anyone help???
    NEVERMIND. I FOUND OUT ON MY OWN WHAT THE ISSUE WAS AND IS NOW FIXED. YAY!

    Why were you trying to link a file in the project to the project file itself? Shouldn't it be a video file or something? Like .mov .wav .avi .mp4 and not .prproj

  • Adobe Premiere Pro CS6 (mac) will not completely launch.

    After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded  the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

    >did upgraded to Yosemite
    CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

  • Adobe Premiere pro CS6 effects presets not working

    Presets in my Adobe Premiere pro CS6 is not working. What can I do? I need Work with Effect Presets
    Message was edited by: Kevin Monahan

    What do you mean "not working"  What's not working?  What are you wanting to do?
    More information please.

  • Adobe Premiere Pro CS6 Crashing

    I've seen some discussions on this but not on the exact problem I've been having,  which is my Adobe Premiere Pro CS6 always crashes when I'm layering either two videos or two audio tracks on top of each other.  If I stack two files and then scrub, then it immediately crashes every single time. I've never had a problem with CS5.5 when doing such an operation.
    Help!
    Canon 7D Footage
    1080P 24fps
    ESata Externanl HDD
    Windows 7 Ultimate
    Core i7
    12 GB ram

    I am having a similar issue that I have nailed down to two specific audio tracks.  When I play audio on these particular tracks, which have Compressor and Denoise plugins on the track mixer, I get the crash error.  Understand, the Compressor and Denoise effects are not on the audio itself.  When I move the audio up to the adjacent tracks above, there is no crash or error, but of course, I don't get the effects that I desire. 
    I solved the problem by right clicking and "Remove Audio Effects..." of which I had a 6 db boost in "Volume".  I made up the gain on the Compressor plugin on the track.
    FWIW I also get the "Audio filters missing" pop-up when I open the project.  This stems from me creating audio presets, applying them to files, and then the preset effects are unable to be recalled when I re-open the project.
    I am in Premiere cs6 on a 2.8 Ghz Intel Core i5 iMac running OSX 10.8.2 w/ 4 GB of RAM.
    Hope this helps...

Maybe you are looking for