Adobe Premiere Pro.exe - Entry Point Not Found

"The procedure entry point AMTRetrievePersonGUIDWithAuthSource could not be located in the dynamic library C:\Program Files\Adobe\Adobe Premiere Pro CC\PrRegistration.dll"
Any help guys?

Are you a registered subscriber or a trial user?
Was this on your first attempt to launch or has Premiere launched successfully in the past?
Do you have any other Creative Cloud apps installed and, if so, do they launch?

Similar Messages

Adobe premiere elements.exe entry point not found

adobe premiere elements.exe entry point not found
how do I fix this error message and run the program?

steinbeck wrote:
Premiere elements 12
On Microsoft windows Xp
Photoshop Elements 12 requires Windows XP SP3
http://www.adobe.com/products/photoshop-elements/tech-specs.html
Try installing Service Pack 3 on Windows XP.
http://support.microsoft.com/kb/322389
While you're at it, make sure your XP is fully up to date before installing PSE12.

AfterFX.exe Entry Point Not Found

I just downloaded Adobe After Effects and when I opened it it displayed 'AfterFX.exe Entry Point Not Found The procedure entry point PF_GetSampleQualityPixelSupport could not be located in the dynamic link library C:\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\RG.ddl.' I tried to run as administrator and then in on compatibility mode but it just said the same thing.
PC specs: OS: Windows 8 Pro
Processor: Intel Pentium CPU G2030 @ 3.00GHz
RAM: 4.00GB
System Type: 64-bit Operating System, x64-based processor
Thank you.

fixing permissions problem that impedes start of Adobe applications

OutlookSyncClient.exe - Entry Point Not Found

I'm at wit's end with this. I've spent most of last night, and this morning trying to track this down. It all started with the iTunes 7.7 update, but it didn't happen until I started syncing Outlook with MobileMe. I get two error messages, about every 15-20 minutes. MobileMe is set to sync "automatically." At one point, I was getting and error message stating that MobileMe couldn't sync and to check my settings. The settings were right, and apparently in my troubleshooting steps I've made that error go away.
OutlookSyncClient.exe - Entry Point Not Found
The procedure entry point MAPIInitialize could not be located in dynamic link library MAPI32.DLL
It has nothing but an OK box, I hit that, and directly after I get another one with the exact same message.
The best part is, the syncing is working fine with MobileMe. These error messages are driving me nuts.
I uninstalled my Nokia's syncing software BEFORE I attempted to even setup with MobileMe (the Nokia was my pre-iPhone-phone). I've uninstalled/reinstalled iTunes. I've uninstalled/reinstalled Office 2003 and its service pack. I've completed all critical updates to Office. I'm running XP Pro SP3 with all critical updates completed. I've also manually deleted the MAPI32.DLL file and ran FIXMAPI to replace it with a good copy.
UPDATE: When I previously stated that I got rid of the MobileMe Sync error message, I apparently have not. It pops up randomly and says:
The sync failed because MobileMe is not property configured on your computer.
Make sure your settings are correct under the Sync tab in the MobileMe preferences on this computer.
They are correct. If I hit the Sync Now button, everything goes smoothly.
Any ideas before I just set fire to this thing?
Thanks in advance for any assistance.
Message was edited by: supradave

UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

Fireworks.exe - Entry Point Not Found Error

Hi. I'm new to this forum.
To be brief, I get the following error message when I start
Fireworks on Windows XP
(%programfiles%/Adobe/Fireworks/fireworks.exe):
Fireworks.exe - Entry Point Not Found
The Procedure entry point
?doReplace@AGL_UnicodeString@agl_2_8@@AAEAAV12@JJPBGJJ@Z could not
be located in the dynamic link library libagluc28.dll.
I've tried copying this DLL from various other locations
(Adobe Bridge, Flash, etc), but to no avail. Where can I get the
correct DLL from, if at all?
All Help appreciated. Thankyou in advance.

A quick search on Google suggests this problem is associated with FlyakiteMacosX plug in.
Do you have that installed on your computer?
If so, have a look at this web page .

HELP....Error Message...Photoshop.exe-Entry Point not found

Hello
I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
Photoshop.exe-Entry point not found
The procedure entry point
?terminate@struturalimageeditingYAXXZ
Could not be located in the dynamic link library Patchmatch.DLL.
I have tried to redown load but keeps saying that it is downloaded
Help please
Bobbi-Lee

Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.

Error: EdgeInspect.exe - Entry Point Not Found

I'm getting the following error message when launching the Adobe Edge Inspect:
---------------------------EdgeInspect.exe - Entry Point Not Found---------------------------The procedure entry point SetGestureConfig could not be located in the dynamic link library USER32.dll. ---------------------------OK   ---------------------------
Followed by another dialog mentioning C:\Program Files (x86)\Adobe\Adobe Edge Inspect\EdgeInspect.exe Edge Inspect has stopped working
More details:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          EdgeInspect.exe
Application Version:          1.0.372.4762
Application Timestamp:          51098b6d
Fault Module Name:          USER32.dll!SetGestureConfig
Fault Module Version:          6.0.6002.18541
Fault Module Timestamp:          4ec3e39f
Exception Code:          c0000139
Exception Offset:          0006f52f
OS Version:          6.0.6002.2.2.0.256.6
Locale ID:          1033
Additional Information 1:          9d13
Additional Information 2:          1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3:          9d13
Additional Information 4:          1abee00edb3fc1158f9ad6f44f0f6be8
I tried googling but I haven't found any solutions, so I thought I'd ask for help here.

No, there is no timeline like that. Vista support for any product will vary from team to team depending on a huge variety of factors.
For us, we're not even sure why it no longers works on Vista. As I said above, it could be a recent change we made or a change in one of the libraries we use with the desktop application. The solution is nowhere near as simple as posting the older version of the desktop application. Edge Inspect is a system of multiple pieces that all have to work together and be able to communicate with each other. Even if we posted the older version of the desktop piece, it's likely that you'd find Edge Inspect features that didn't work because the other pieces no longer spoke to it correctly. It would get progressively worse with each release until it stopped working entirely. And we simply don't have the resources to support a Vista version of the desktop application and keep it up to date with all the other pieces of the application.
We never devoted any of our limited dev or testing resources to testing on Vista and can't start doing that now. In our original FAQ we noted that it was not supported but that we didn't know of any issues with Edge Inspect running on Vista. That's now changed. I've updated the FAQ, and we'll be modifying the installer to reflect the new situation.
I'm sorry, but the final word from engineering and product management is in, Edge Inspect does not support Vista.

After updating, install error "Install Flash Player.exe - Entry point not found"

My current version of Flash Player is: 11.1.102.55. Then after an Update is performed and the download is downloaded, then it tries to install the download and an error message occurs. The error message says - Install Flash Player.exe - Entry point not found - then it says The procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNAL32.dll.
When I try to uninstall Flash Player I get the same error message above except that it says Uninstall_Flash_Player.exe instead of Install Flash Player.exe.
I'm running WIN2000, my current version of Flash Player is 11.1.102.55 and I’m running Firefox version 12.0.

I believe 10.1.102.64 was the last supported version of Flash Player for Win2k. That being said, there have been numerous users that have been able to work around the error you are receiving. Please see this post for details:
http://forums.adobe.com/message/4218334#4218334

Illustrator.exe - Entry Point Not Found

I have just upgraded to Creative Cloud, previously we had Adobe CS6 Design Premium. Before upgrading I de-installed Adobe CS6 Design Premium from my Windows 8 Professional 64-bit PC, I then ran the Adobe Removal tool went for a reboot.
After the reboot I went with the new install of Creative Cloud Apps using the latest Adobe Application Manager everything downloaded and installed fine however Illustrator in 32 bit version doesnt work, every time I click on the shortcut I get this error saying 'Illustrator.exe - Entry Point Not Found.
I completely removed Illustrator again and tried a second attempt at installing and keep getting the same error, also Adobe Illustrator CS6 Update (Version 16.2.0) will not install and neither will the Touch App Plugin Update.
Clearly something is weird with the install for 32-bit. The 64-bit version functions fine however I want to try and resolve this issue so that everything works.
Thanks,
Mark

That worked perfectly, so essentially I did everything you said in the first response, but then from the RUN prompt I typed %TEMP% and cleared all files. Also cleared out files from the Adobe folder which related to Illustrator.
I then enabled Administrator account as you highlighted, rebooted then installed fine.
Now works perfectly.
Thanks for your help.

Error : Photoshop.exe - Entry Point Not found

I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
Photoshop.exe - Entry Point Not found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
-Jitu

Install SP3. It's required in order to run Photoshop on Windows XP.
http://www.adobe.com/products/photoshop/tech-specs.html

Error Message: EdgeAnimate.exe - Entry Point Not Found

I'm running 64 bit MS Vista Ultimate. My original download of Edge Animate ran okay . However after running the most recent update, Edge Animate will no longer launch. Below is the error message:
EdgeAnimate.exe - Entry Point Not Found:The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.
Any one have a fix?

This was reported last week in the Edge Animate forum by Vista users
http://forums.adobe.com/message/5074933
Adobe Edge developers says they're aware of it but no fix yet that I have seen.
I suggest you join that thread and monitor developments there.

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

Contribute.exe - Entry Point Not Found

I am getting the following error message
Contribute.exe - Entry Point Not Found
The procedure entry point GetProcessingFileNameW could not be
located in the dynamic link library PSAPI.DLL.

Hi,
Can you try renaming the PSAPI.DLL that is residing in your
{<Drive>:\Program Files\...\Contribute xx\Configuration\}
Folder and relaunch Contribute.
Hope this helps.
Hope this link helps -
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=290&threadid=1100166
Thanks,
Manoj

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

Adobe Premiere Pro.exe - Entry Point Not Found

Similar Messages

Maybe you are looking for