Adobe Premiere Pro Help | Control surface support

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/control-surface-support.html

Adobe doesn't typically make public it's plans for future features. More often than not, we don't find out until just before release.
But you can let them know you want it.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Adobe Premiere Pro Help | Customizing the Project panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/customizing-project-panel.html

Honestly, you did not get my point.
What I am saying is, that the icon view has no rational order of files. Why is that?
At least there should be a way to figure out, even if it is not possble to alter the sort criteria, in which order the files are listed in icon view.
If I serach for a spezific file, sure I can use list mode, but what about "there were a couple of frames with that car, and it was shot after file X … a just let me fastly scrub trough the footage in that brandnew icon view … wait … where is … aehm .. ok, I scrub trough every file."
Do not get me wrong, I love the new icon view possibilities so much, that I want to actually use them.
Please just fix it Adobe, or tell me how to decrypt the sort mechanism.
Am 13.09.2012 um 03:02 schrieb Jim Simon <[email protected]>
Re: Adobe Premiere Pro Help | Customizing the Project panel
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
How should an editor use this view seriously?
Honestly, to sort manually. If you want an auto sort, use List view.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4694701#4694701
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4694701#4694701. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Premiere Pro Third-Party Hardware Support

Adobe have just posted an updated Adobe Premiere Pro Third-Party Hardware Support

I replied to this info on another thread, but suffice it to say:
This list is utterly worthless and best removed if Adobe does not want to further destroy their image.

Re: Adobe Premiere Pro Help | Trimming clips (CS6)

How do we access just the P Pro CS6 Help Reference instead of all this community content?

Regarding changes to Help, please read this document first: http://helpx.adobe.com/x-productkb/global/community-help.html
[Jeff Sengstack]
How do we access just the P Pro CS6 Help Reference instead of all this community content? When will Help arrive?
Jeff, this is the Help reference. It arrived the moment we shipped CS6. There is tons of new writing here for the CS6 trimming features here on this page. The documentation covers all the new features. I also have some tutorials plugged in. What is your specific complaint about the page for trimming in CS6? If there is a problem with the content being incorrect, or missing info, I can fix it. I cannot fix the way that the new Help system is designed, however, I can provide feedback to my superiors.
Also, we've been plugging in supporting community content into Help along with reference content for quite some time so that should be no surprise. We hope it is a help, rather than a hindrance. These articles and tutorials are from authors I worked with during prerelease, so tutorials are vetted, and the content is valid.
[Jim Simon]
Can't yet.
You can access the entire Help system for Premiere Pro here: http://helpx.adobe.com/premiere-pro/topics.html or just press F1. This page (called the "Topics Page"), although different in appearance, has very similar chapter topics that were found in the CS5/CS5.5 Help table of contents.
The only thing you cannot yet do is download the entire Help system as a PDF. That feature is coming next month: http://helpx.adobe.com/content/help/en/x-productkb/global/cs6-help-pdf-available-june.html
[shooternz]
I am kind of staggered that Adobe launched and released without Help Files for these CS6 products. Particularly in the case of SpeedGrade where I needed most Help. New and unfamiliar applications need Help Files for Users to get up to speed! Adobe are now relying on the cool Tutorial Videos (which have great value) but are hopeless in terms of such basics as "Setting Up" and trouble shooting. "RTFM"...What FM? I have put SpeedGrade on the backburner because of this. (I simply can not resolve some set up issues due to lack of available goto info.) May not get back to it for sometime actually.
That's not true, shooternz. Help files are available for every Adobe product. Just press F1. For Premiere Pro, the list of topics (table of contents) is here: http://helpx.adobe.com/premiere-pro/topics.html Keep in mind that this is a brand new Help system, and it took extra effort to complete the content and make sure that the system functioned properly. If there are any problems with the system, please let me know. For example, search needs to be improved and that is something we know about and are working on.
SpeedGrade Help is sparse because we just got the product 6 months ago. Given our time constraints, there simply was not enough time to develop a full Help system. On behalf of Adobe, I apologize for not being able to provide full documentation for SpeedGrade. I assure you, though, that a full set of Help documentation for SpeedGrade will be available later this year. In the mean time, if you have questions about SpeedGrade, check out the user-to-user forum here: http://forums.adobe.com/community/speedgrade
[Jeff Sengstack]
The issue is not how to access Help (pressing F1), it's how to access the old Help reference. The new Help system is community-oriented and does not include access to the old Help reference file.
Do you mean you want the CS5/CS5.5 Help without the CS6 content? It's available here on PDF: http://helpx.adobe.com/premiere-pro/archive.html
The "new community-oriented" Help is not new. We've been adding community content along with the reference content for some time now. If you mean to say the Help is only created by the community, that is totally incorrect. I am the writer for Premiere Pro, I include all the details of the new features, and I cull content to support the writing.
If one noodles around in community help, one will find bits and pieces of the old Help reference but no single source.
The previous Help content is included verbatim into current Help. It just has CS6 content added to it. It also "looks different" and is more search based. Again, search the PDF if you need to see the CS5/CS5.5 Help without CS6 content.
That is unfortunate, because Community Help is a cobbled-together, clumsy means to find solutions. Wheras, when using the old Help reference, it was a lot easier to quickly track down answers to basic questions.
I would really like to pinpoint what you are missing from CS5/CS5.5 Help. Why is it harder now to find what you need? The main differences I see is that there are no "next page" buttons, or hierarchy links. Is this what is bothering you? By the way, you can return to the topics page by clicking "Adobe Premere Pro Help" in the upper left of the page.
[Wodehouse]
I thought something had gone wrong with Master Collection installation because not a single product has any HELP guide!!!!
Help systems are no longer managed by the Community Help Client and are now handled by the Adobe Help Manager. There may be edge cases where Help might not appear in previous systems. Check the Adobe Help Manager and see if you can have access to the Help that you want. More on the Adobe Help Manager in this thread: http://forums.adobe.com/thread/1000134

Export problems with relation to audio in Adobe Premiere Pro HELP!!

I have been working on a school assignment for media on Adobe Premiere Pro CC and have come across a very frustrating issue that I have no idea about how to solve. it goes under the category of a 'technical difficulty'.
As I have alot of interviews and talking in my project for my Documentary I am shooting on Bullying for my Current Affair I have alot of audio to deal with and with my Rode VideoMic Pro when in conversation in the midst of an interview there is a constant 'hiss and crackle' that one can hear when watching hence I have used the audio affect of "DeNoiser" to get rid of this and it seems to work great on my workflow in my sequence in Premiere as I have reduced most clips to -15Db's. But when I export my project as I have done several times,the 'Denoiser' affect doesn't work for the first 3 seconds + for all clips that I have used to affect for. At the start of all the clips used with the affect there is a constant hiss and crackle and after 3 seconds it fades out??? Please help me with this very unusual problem as I want this to be a fantastic film on your fantastic software!
Thanks

I would not return Adobe, I would return the camera, it is not suited for editing. If you insist on editing that material and end up with pretty crappy results, play it out from a DVD player into a good tape based DV video camera thru analog in and pass it thru to firewire for capture.
To put it another way, when maximum achievable fidelity of video is 100, your camera is at 10% due to the heavy MPEG compression. You need to convert that to DV and you are left with around 8% due to DV compression, you then need to encode it again to MPEG and you end up with less than 1% out of a possible 100.

FROM Adobe Premiere Pro CC 2014.2 support TO Adobe Premiere Pro CC ver. 7?

My friend just sent me a PROJECT FILE from the latest ver of Adobe Premiere Pro CC, which is 2014.2, and I opened it to the old version of Adobe Premiere Pro CC, which is ver. 7. An error message pop up and it said that it cant be open cuz its a newer version. How can I open the project file he sent me to my old version of Adobe Premiere Pro CC?

I was behind on an update! Never mind LOL!

Premiere Pro and control surfaces

Does Premiere Pro have support for control surfaces like the Mackie MCU Pro or the Avid Artist Control?
Thank you.

Support is new in CC, but I don't know which specific models are supported. You might try a Google search.

Adobe Premiere Pro Help | Default keyboard shortcuts in CS6

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/default-keyboard-shortcuts.html

I guess I should have said that I've already been looking, First, slowly scrolling and going through the entire keyboard shortcuts list, then, over the past three days, searching on google for 'end' 'timeline' 'beginning' 'playhead' and various other combinations of these and other keywords in searches not only on Google, but in the actual Help and User Manual for Premiere CS6. Not to be ended there, because I have been searching, now on my fourth day of intense searching also taking YouTube videos, and many of the excellent forums for Premiere online. I guess I should have mentioned the hundreds of dead ends that I've come across in this search, but all paths seem to be leading away rather than leading to the simple answer I am looking for. I did find references to moving the playhead, to clips, markers, last place, and many others but none for moving the playhead to the beginning or the end of the timeline. My searchs even brought results for the beginning and the end of time, but I hope I can find the answer before then.
Is there a keyboard shortcut for moving the playhead to the beginning or the end of the timeline?
TIA,
Ken

Adobe Premiere Pro Help | Three-way Color Corrector effect (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/three-way-color-corrector-cs6.html

The help does not tell you where the Tonal Range output now is as it has moved from the Output Menu.

Adobe Premiere Pro Help | Adjustment Layers (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html

Why the circle effect does not work while using the new adjustment layer in Premiere Pro CS6? I have tried to animate circle with its changing radius. Everything is working fine on the screen but the effect itself, it takes the first value and stays with it even if the circle radius value changes up and down. I have placed a circle at the specified coordinates on the adjustment layer and changed its radius every three second several times. The adjustment layer is placed no the video track two above the still image of a map sitting on the main video track.
Christophe

Adobe Premiere Pro Help | Editing multi‑camera sequences (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-multi-camera-sequences1.html

According to the tutorial at http://www.video2brain.com/en/videos-13067.htm audio now defaults not to Track 1 of the source sequence as it used to, but to the video first selected when choosing between the multiple cameras.
I understand TimB was wishing to mix audio in the audio mixer in the source sequences and apply that to the multicam sequence without export audio and re-importing.
According to my notes to self in June 2012 when I used CS6 to do a multicam project, I wrote:
“To enable audio for all cameras, right click on the Source Sequence and ‘Open in Timeline’
Enable all the audio tracks you want.”
And that was all.
However the PremPro instructions for CS6 says:
Enabling audio in the multi-camera source sequence
By default, Premiere Pro only enables audio channel one in the multi-camera source sequence. For multi-camera editing workflow, enable each audio track manually before editing the target sequence. To enable audio tracks for the multi-camera source sequence, do the following:
1. Open the multi-camera source sequence by selecting the multi-camera source sequence icon in the Project panel, right-click
(Win) or Ctrl-click (Mac OS) the icon, and then choose Open In Timeline.
2. The Timeline opens. Select the audio tracks, and then enable the other audio tracks by clicking the Toggle Track Output
button for each audio track.
3. Now that all audio tracks are enabled, you can close the sequence
This is how I remember it but it doesn’t gel with TimB’s post. There are two sections in the Help pdf, one for CS5.5 (and I think CS5) and a separate one for CS6 as quoted above.

Adobe Premiere Pro Help | What's New in CS6

strJiveDescriptionhttp://helpx.adobe.com/premiere-pro/using/whats-new-cs6.html

It's still there but you need to open the Button Editor, the little 'plus' sign in the right bottom corner of the PM.
Now you can add or delete buttons by just dragging.

Adobe Premiere Pro Help | Exporting to DVD or Blu-ray Disc

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/exporting-dvd-or-blu-ray.html

Exactly what are you Exporting?
How are you burning your BD?
Are you doing the authoring in Adobe Encore, the authoring program, included with PrPro, since CS 3?
If you are using Adobe Encore, and having issues with the resulting BD (Blu-ray Disc), then I would post the full details of your Project, and steps taken, in the Adobe Encore Forum: http://forums.adobe.com/community/encore/encore_general
Good luck,
Hunt

Adobe Premiere Pro Help | Editing audio in a Timeline panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-audio-timeline-panel.html

Or, go into the audio units format of the timeline and manually adjust the audio portion of the cut to hit as close to a zero crossing as possible. Jim's way is the easiest, and sufficient for most people, but if you need perfect cuts and not a quick fade, it is possible to do it in Premiere Pro.

Adobe Premiere Pro Help | Organizing assets in the Project panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/organizing-assets-project-panel.html

If you have opened a 5.5 project in CS6 you may experience the project panel search filter to go gray and restrict availability.
Try to save and restart.
If this doesn't work, then try to start a new PProCS6 project and import the 5.5 one, be sure to select "Entire Project" at the dialog box.
Other people have noticed this too. It might be related to unindexed items - if Premiere Pro CS6 doesn't finish indexing the clips, it won't let you search. This is something that may require a bug report. See the link below.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Or, you might be running into the problem discussed in this forum thread:
http://forums.adobe.com/message/4666238

Adobe Premiere Pro Help | Control surface support

Similar Messages

Maybe you are looking for