Adobe Premiere Pro Help | Three-way Color Corrector effect (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/three-way-color-corrector-cs6.html

The help does not tell you where the Tonal Range output now is as it has moved from the Output Menu.

Similar Messages

Audio drops when using Three-Way Color Corrector in CS6

Hello all,
I recently encountered a very odd issue while editing a friends wedding video using Adobe Premiere Pro CS6. I had an interview with a guest laid over a music track and had all the audio adjustments made to both audio tracks so that the levels were where I wanted them. I then added the Three-Way Color Corrector to the video track and corrected the footage to my liking. When I played back this section of the wedding video, half way through the person's interview, his audio cut out. The audio from the music track was still playing, so it was not that audio drop that most people are familiar with within Premiere. I even muted the music track and played back the mentioned section of video and at the same exact point in time his audio just cuts out completely. I checked to see if any weird key frames had been added and nothing had been touched (that I could see). Also, the audio waveforms were still visible. I deleted the Three-Way Color Corrector effect off of the clip and suddenly there were no more audio problems. Eventually, needing color correction, I added an adjustment layer and assigned the Three-Way Color Corrector to that and had no issues, but I still don't see what could have been the problem, and it seems like a glitch to me. Has anyone ever had this happen to them? If so, what are your thoughts? Thanks!

The help does not tell you where the Tonal Range output now is as it has moved from the Output Menu.

I am having flickering issues on both my timeline and when i render a clip when i drop and adjust a three way color corrector on a clip

I am having flickering issues on both my timeline and when i render a clip when i drop and adjust a three way color corrector on a clip

See if anything here helps:
https://forums.adobe.com/search.jspa?q=premiere+pro+color+correction+flicker

Three-Way Color Corrector Eyedropper Tool Not Working on Second Display in OSX Maverick

Hello,
Since updating to Mavericks at work on Monday, I have been unable to use the Three-Way Color Corrector's eyedropper tool on a dual-screen setup in Premiere Pro CC.
I have all of my panels, apart from my Program monitor panel, on one display. When I select the Three-Way Color Corrector's white balance eyedropper and go to the second display where my Program panel is, it turns back into an arrow and doesn't allow me to select anything. When I move my Program panel to the same display as the others it lets me use it as normal. Unfortunately that is not how I work and I would like the program to function as normal.
I was wondering if anyone else has had this problem and discovered a solution. I will submit a bug report right now.
Thank you.

Hi Punker,
Thanks for posting the workaround. This is a known issue that we're investigating. Fow now the workaround is to:
Goto> System Preferences>Mission Control.
Un-tick "Displays Have Separate Spaces"
Logout or Re-boot system.
The issues should be resolved.
Best,
Peter Garaway
Adobe
Premiere Pro

Secondary Color Correction in Three-Way Color Corrector keeps crashing

Every single time, without fail, when I check "Show Mask" the click an eyedropper in the Secondary Color Correction section in the Three-Way Color Corrector it makes my program crash. It freezes. I'm using Premiere Pro CS6 on Mavericks on a MacBook Pro. Can anyone help? Has anyone else experienced this problem?
Thank you.

One other simple gotcha is to be color correcting but the viewer is not showing the current clip (the one you are working on...)
Thanks for posting back. Good to have closure on questions.
x

Where is Histogram in Three-way Color Corrector

The Three-way Color Corrector Help section states: "The effect has a histogram that displays the image’s luminance." Where is this histogram?

Good tips from Robodog2 and Shooternz.
A histogram can be dynamic just like the waveform monitor. But the Levels histogram (the only histogram I can find in P Pro) does not work that way. It displays a shapshot of the currently visible frame. You have to close that dialog box, move the CTI, and reopen the Levels dialog box to see the updated histogram.
Comparing histograms in P Pro with PS shows you how that the two programs view images differently. Why that's so, I don't know. But here are two screenshots showing histograms from both products of the same video frame:
This is the P Pro Levels effect histogram for a frame in a clip.
And this is the PS histogram for that same frame.
The Three-Way Color Corrector, Tonal Range Output display shows you what P Pro sees as Shadows, Midtones and Highlights. You can alter the default settings for what P Pro considers Shadows, Midtones and Highlights by changing the settings in the Tonal Range Definition control.
In any event, this thread started with a query based on what we now know was a mistake in the P Pro CS5 Help file. I have posted a correction to that Help file page.
Bottom line for me...other NLEs and color correction tools have histograms. P Pro, for all practical purposes, does not have one. Perhaps an Adobe engineer might weigh-in on why that is so.
Best regards,
Jeff

Three Way Color Corrector from PP 7.2.2 to 8.0.1 issue

Hello,
On my desktop pc I am running PP 8.0.1 on Win 7 Pro. I opened a 7.2.2 Project file in 8.0.1 and some instances where the Three Way Color corrector is applied shows as solid green in the program monitor.
The footage is mts AVCHD straight from the camera. If I turn off the fx switch for the TWCC the video displays fine. If I delete the TWCC effect from the clip and re-apply it, it also works fine.
PPCC 8.0.1 seems to be having an issue with the TWCC that was applied to clips in the previous version of PP.
Before messing with drivers, etc, I copied the project file (the 7.2.2 proj file) and footage to my laptop also running Win 7 and 8.0.1 to see if the error was still occurring. I opened the 7.2.2 project file and PP converted to 8.0.1 and the result is the same. The clip with the TWCC that was originally applied in 7.2.2 is still showing up as solid green in the program monitor. Different computer, different video card, different driver, same result. Exports out as solid green as well in AME.
Is anyone else experiencing any issues with any of the color effects after converting a previous version PP proj file to an 8.0.1 project file?

Hi Shane,
I don't see this at all on my system. Anyone else? Have you filed a bug yet? http://adobe.ly/ReportBug
Thanks,
Kevin

Three Way Color Corrector: turn off green clipping info in program monitor???

How can I turn off the green indicator in the program window, that highlights my blacks that contain no image information. I applied a three-way-color corrector via an adjustment layer. Many thanks!

Hi Joe,
I am running on a MacBook Pro, OSX 10.8.3, my graphics card is:
Chipset Model:          Intel HD Graphics 3000
Type:          GPU
Bus:          Built-In
VRAM (Total):          512 MB
Vendor:          Intel (0x8086)
Device ID:          0x0116
Revision ID:          0x0009
gMux Version:          1.9.23
I shot on a flat picture profile with a Nikon D800 and played with the input levels in the 3-way-color corrector. Again, if I brighten the whole image, these indicators will disappear; if I darken the image, they will grow. It is not an artefact, it is a way to show me my crushed blacks. Like a zebra function in cameras. I just cannot find a way to turn this off.
Thanks again,
Carl

Adobe Premiere Pro Help | Customizing the Project panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/customizing-project-panel.html

Honestly, you did not get my point.
What I am saying is, that the icon view has no rational order of files. Why is that?
At least there should be a way to figure out, even if it is not possble to alter the sort criteria, in which order the files are listed in icon view.
If I serach for a spezific file, sure I can use list mode, but what about "there were a couple of frames with that car, and it was shot after file X … a just let me fastly scrub trough the footage in that brandnew icon view … wait … where is … aehm .. ok, I scrub trough every file."
Do not get me wrong, I love the new icon view possibilities so much, that I want to actually use them.
Please just fix it Adobe, or tell me how to decrypt the sort mechanism.
Am 13.09.2012 um 03:02 schrieb Jim Simon <[email protected]>
Re: Adobe Premiere Pro Help | Customizing the Project panel
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
How should an editor use this view seriously?
Honestly, to sort manually. If you want an auto sort, use List view.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4694701#4694701
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4694701#4694701. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Three-Way Color Corrector Variación/Problema

El efecto Three-Way Color Corrector causa una variación a cualquier capa con tan solo añadirlo.
Por qué pasa lo anterior?
Muestra:

I tend to use Colorista rather than PP's native effects, myself. Have never seen this issue.

(three-way color corrector) secondary color correction masks not working?

Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?

strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image

Export problems with relation to audio in Adobe Premiere Pro HELP!!

I have been working on a school assignment for media on Adobe Premiere Pro CC and have come across a very frustrating issue that I have no idea about how to solve. it goes under the category of a 'technical difficulty'.
As I have alot of interviews and talking in my project for my Documentary I am shooting on Bullying for my Current Affair I have alot of audio to deal with and with my Rode VideoMic Pro when in conversation in the midst of an interview there is a constant 'hiss and crackle' that one can hear when watching hence I have used the audio affect of "DeNoiser" to get rid of this and it seems to work great on my workflow in my sequence in Premiere as I have reduced most clips to -15Db's. But when I export my project as I have done several times,the 'Denoiser' affect doesn't work for the first 3 seconds + for all clips that I have used to affect for. At the start of all the clips used with the affect there is a constant hiss and crackle and after 3 seconds it fades out??? Please help me with this very unusual problem as I want this to be a fantastic film on your fantastic software!
Thanks

I would not return Adobe, I would return the camera, it is not suited for editing. If you insist on editing that material and end up with pretty crappy results, play it out from a DVD player into a good tape based DV video camera thru analog in and pass it thru to firewire for capture.
To put it another way, when maximum achievable fidelity of video is 100, your camera is at 10% due to the heavy MPEG compression. You need to convert that to DV and you are left with around 8% due to DV compression, you then need to encode it again to MPEG and you end up with less than 1% out of a possible 100.

Re: Adobe Premiere Pro Help | Trimming clips (CS6)

How do we access just the P Pro CS6 Help Reference instead of all this community content?

Regarding changes to Help, please read this document first: http://helpx.adobe.com/x-productkb/global/community-help.html
[Jeff Sengstack]
How do we access just the P Pro CS6 Help Reference instead of all this community content? When will Help arrive?
Jeff, this is the Help reference. It arrived the moment we shipped CS6. There is tons of new writing here for the CS6 trimming features here on this page. The documentation covers all the new features. I also have some tutorials plugged in. What is your specific complaint about the page for trimming in CS6? If there is a problem with the content being incorrect, or missing info, I can fix it. I cannot fix the way that the new Help system is designed, however, I can provide feedback to my superiors.
Also, we've been plugging in supporting community content into Help along with reference content for quite some time so that should be no surprise. We hope it is a help, rather than a hindrance. These articles and tutorials are from authors I worked with during prerelease, so tutorials are vetted, and the content is valid.
[Jim Simon]
Can't yet.
You can access the entire Help system for Premiere Pro here: http://helpx.adobe.com/premiere-pro/topics.html or just press F1. This page (called the "Topics Page"), although different in appearance, has very similar chapter topics that were found in the CS5/CS5.5 Help table of contents.
The only thing you cannot yet do is download the entire Help system as a PDF. That feature is coming next month: http://helpx.adobe.com/content/help/en/x-productkb/global/cs6-help-pdf-available-june.html
[shooternz]
I am kind of staggered that Adobe launched and released without Help Files for these CS6 products. Particularly in the case of SpeedGrade where I needed most Help. New and unfamiliar applications need Help Files for Users to get up to speed! Adobe are now relying on the cool Tutorial Videos (which have great value) but are hopeless in terms of such basics as "Setting Up" and trouble shooting. "RTFM"...What FM? I have put SpeedGrade on the backburner because of this. (I simply can not resolve some set up issues due to lack of available goto info.) May not get back to it for sometime actually.
That's not true, shooternz. Help files are available for every Adobe product. Just press F1. For Premiere Pro, the list of topics (table of contents) is here: http://helpx.adobe.com/premiere-pro/topics.html Keep in mind that this is a brand new Help system, and it took extra effort to complete the content and make sure that the system functioned properly. If there are any problems with the system, please let me know. For example, search needs to be improved and that is something we know about and are working on.
SpeedGrade Help is sparse because we just got the product 6 months ago. Given our time constraints, there simply was not enough time to develop a full Help system. On behalf of Adobe, I apologize for not being able to provide full documentation for SpeedGrade. I assure you, though, that a full set of Help documentation for SpeedGrade will be available later this year. In the mean time, if you have questions about SpeedGrade, check out the user-to-user forum here: http://forums.adobe.com/community/speedgrade
[Jeff Sengstack]
The issue is not how to access Help (pressing F1), it's how to access the old Help reference. The new Help system is community-oriented and does not include access to the old Help reference file.
Do you mean you want the CS5/CS5.5 Help without the CS6 content? It's available here on PDF: http://helpx.adobe.com/premiere-pro/archive.html
The "new community-oriented" Help is not new. We've been adding community content along with the reference content for some time now. If you mean to say the Help is only created by the community, that is totally incorrect. I am the writer for Premiere Pro, I include all the details of the new features, and I cull content to support the writing.
If one noodles around in community help, one will find bits and pieces of the old Help reference but no single source.
The previous Help content is included verbatim into current Help. It just has CS6 content added to it. It also "looks different" and is more search based. Again, search the PDF if you need to see the CS5/CS5.5 Help without CS6 content.
That is unfortunate, because Community Help is a cobbled-together, clumsy means to find solutions. Wheras, when using the old Help reference, it was a lot easier to quickly track down answers to basic questions.
I would really like to pinpoint what you are missing from CS5/CS5.5 Help. Why is it harder now to find what you need? The main differences I see is that there are no "next page" buttons, or hierarchy links. Is this what is bothering you? By the way, you can return to the topics page by clicking "Adobe Premere Pro Help" in the upper left of the page.
[Wodehouse]
I thought something had gone wrong with Master Collection installation because not a single product has any HELP guide!!!!
Help systems are no longer managed by the Community Help Client and are now handled by the Adobe Help Manager. There may be edge cases where Help might not appear in previous systems. Check the Adobe Help Manager and see if you can have access to the Help that you want. More on the Adobe Help Manager in this thread: http://forums.adobe.com/thread/1000134

Adobe Premiere Pro Help | Color correction and adjustment

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/color-correction-adjustment.html

Hi Ann,
I apologize for the incorrect screen shots. I will forward this thread to the new content and community lead, Mallika Yelandur.
Cheers,
Kevin

Adobe Premiere Pro Help | Default keyboard shortcuts in CS6

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/default-keyboard-shortcuts.html

I guess I should have said that I've already been looking, First, slowly scrolling and going through the entire keyboard shortcuts list, then, over the past three days, searching on google for 'end' 'timeline' 'beginning' 'playhead' and various other combinations of these and other keywords in searches not only on Google, but in the actual Help and User Manual for Premiere CS6. Not to be ended there, because I have been searching, now on my fourth day of intense searching also taking YouTube videos, and many of the excellent forums for Premiere online. I guess I should have mentioned the hundreds of dead ends that I've come across in this search, but all paths seem to be leading away rather than leading to the simple answer I am looking for. I did find references to moving the playhead, to clips, markers, last place, and many others but none for moving the playhead to the beginning or the end of the timeline. My searchs even brought results for the beginning and the end of time, but I hope I can find the answer before then.
Is there a keyboard shortcut for moving the playhead to the beginning or the end of the timeline?
TIA,
Ken

Adobe Premiere Pro Help | Three-way Color Corrector effect (CS6)

Similar Messages

Maybe you are looking for