Adobe Premiere Pro Help | Transferring and importing files

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

bonjour,
je possède une caméra "XDCAM EX1" et je travaille avec Adobe Première Pro 64bits et After Effects 64bits.
depuis que je suis passée de la CS5 à la CS6 les fichiers issue de ma caméra ne sont plus acceptés même avec "clip browser".
avez-vous une solution pour monter ces images?
cordialement

Similar Messages

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor. Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Adobe Premiere Pro Help | Customizing the Project panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/customizing-project-panel.html

Honestly, you did not get my point.
What I am saying is, that the icon view has no rational order of files. Why is that?
At least there should be a way to figure out, even if it is not possble to alter the sort criteria, in which order the files are listed in icon view.
If I serach for a spezific file, sure I can use list mode, but what about "there were a couple of frames with that car, and it was shot after file X … a just let me fastly scrub trough the footage in that brandnew icon view … wait … where is … aehm .. ok, I scrub trough every file."
Do not get me wrong, I love the new icon view possibilities so much, that I want to actually use them.
Please just fix it Adobe, or tell me how to decrypt the sort mechanism.
Am 13.09.2012 um 03:02 schrieb Jim Simon <[email protected]>
Re: Adobe Premiere Pro Help | Customizing the Project panel
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
How should an editor use this view seriously?
Honestly, to sort manually. If you want an auto sort, use List view.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4694701#4694701
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4694701#4694701. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can I use Adobe Premiere Pro to convert Camcorder MOD files to MPEG?

Can I use Adobe Premiere Pro to convert Camcorder MOD files to MPEG files?

If you are on CC2014 probably not. It does not get interpreted correctly.
Premiere and previous versions does not support MOD files.
Best is to convert to avi
converio_095.htm
The first link John posted contains confusing and incorrect information.

Why does Adobe Premiere Pro modify original footage/asset files (e.g. mov)? (CS6)

Background:
A colleague had given me a large 33Gb .mov for use in a project, I put this file on a backup drive.
I made an identical copy of this 33Gb .mov file and placed it in a folder that I'd use to work on a Premiere Pro Project.
I ran Adobe Premiere Pro CS6 and dragged in the 33Gb .mov file into the Sequence (imported it)
Premiere Pro CS6 started conforming the file.
After it had finished, I noticed that it's Modified Date was just now i.e different to the Modified Date on the original copy of the file on the backup drive (see step 1)
I ran a BeyondCompare check between the .mov file on the backup drive (see step 1) and the one that the Premiere Pro project was using (step 2, 3) and Beyond Compare reported they were different.
I had initially thought it was unrelated file corruption of some kind, but I have checked this several times and got the same outcome, so it's definitely Premiere Pro deliberately modifying the file.
So I am puzzled: these are supposed to be the same file.
Why would there be a need for Adobe Premiere Pro to modify the footage?
What does it do to the file?
Would it not be better to create a separate file if necessary?
I can accept this if that's how it works and it's good to know that it was Premiere Pro deliberately modifying the files and not corruption (so my hardware ought to be healthy). But it makes more sense to me if Premiere Pro made separate modified copies for its own use. Modifying the file as it does hinders my process for checking the integrity of backups; if the original asset footage files were the same as earlier copies then it would be easy to know that the backups are OK.
Thoughts?

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Adobe Premiere Pro CS6 crashing when importing HDV Video

For some reason I keep getting crashes when importing HDV (720p60) video into the timeline of Adobe Premiere Pro CS6. This has happened on two different machines, with similar specs.
Per the suggested guidelines, here are the specifics:
Version of Premiere Pro: CS6, Version 6.0.5 (001 (MC:264587))
All updates have been installed.
Operating System: Mac OS X 10.8.5.
Source footage: HDV 720p60 video in .MOV container.
Full text of error message: "Sorry, a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project."
Link to full crash report: http://goo.gl/Gn8Bzn
Crash occurs when trying to import HDV .MOV file.
This is a consistent problem when importing .MOV files of this type.
Complete Adobe Creative Suite is installed. Also using Episode Pro encoding software from Telestream to prepare HDV video. No other external video hardware or codecs installed.
Yes, I am using the Mecury Playback Engine GPU acceleration.
Thanks in advance to anyone who can help me figure this one out.

Thanks Mark. Here is the Media-Info Data of one of the clips:
File: CHRISTOPHER.mov
Size: 8.11 GB
Format: QuickTime/MPEG-4/Motion JPEG 2000 format
Stream count: 2
Duration: 00:58:29
Bit rate: 19841 kb/s
Meta info:
    creation_time: 2013-12-23 18:51:36
Stream 0
Type: video
Codec: mpeg2video
Codec profile: Main
FourCC: hdv9
Duration: 00:58:29
Width: 1280
Height: 720
Sample aspect ratio: 1:1
Display aspect ratio: 16:9
Pixel format: yuv420p
Frame rate: 59.95 fps
Bit rate: 18300 kb/s
Meta info:
    handler_name: Apple Alias Data Handler
    creation_time: 2013-12-23 18:51:36
    language: eng
Stream 1
Type: audio
Codec: pcm_s16be
FourCC: twos
Duration: 00:58:29
Bit rate: 1536 kb/s
Sample rate: 48000 Hz
Sample format: s16
Channel: 2
Meta info:
    handler_name: Apple Alias Data Handler
    creation_time: 2013-12-23 18:51:36
    language: eng

Can I buy and download adobe premiere pro at home and then use that DMG to install it in my office?

Have just purchased a beast of a Mac Pro. Will be using this for editing a feature film. Problem is I need to buy and download Adobe Premiere Pro. My internet speed in the office is abysmal and it would take forever to download. Thats why I was thinking of downloading the software at home, and then using that DMG file to install on the Mac Pro in office. Is this possible? Will appreciate any help at all.
Thanks!

You can download the Enterprise Deployment packages and install them, but you still need to install the CC app in the first place.
Mylenium

Re: Adobe Premiere Pro Help | Trimming clips (CS6)

How do we access just the P Pro CS6 Help Reference instead of all this community content?

Regarding changes to Help, please read this document first: http://helpx.adobe.com/x-productkb/global/community-help.html
[Jeff Sengstack]
How do we access just the P Pro CS6 Help Reference instead of all this community content? When will Help arrive?
Jeff, this is the Help reference. It arrived the moment we shipped CS6. There is tons of new writing here for the CS6 trimming features here on this page. The documentation covers all the new features. I also have some tutorials plugged in. What is your specific complaint about the page for trimming in CS6? If there is a problem with the content being incorrect, or missing info, I can fix it. I cannot fix the way that the new Help system is designed, however, I can provide feedback to my superiors.
Also, we've been plugging in supporting community content into Help along with reference content for quite some time so that should be no surprise. We hope it is a help, rather than a hindrance. These articles and tutorials are from authors I worked with during prerelease, so tutorials are vetted, and the content is valid.
[Jim Simon]
Can't yet.
You can access the entire Help system for Premiere Pro here: http://helpx.adobe.com/premiere-pro/topics.html or just press F1. This page (called the "Topics Page"), although different in appearance, has very similar chapter topics that were found in the CS5/CS5.5 Help table of contents.
The only thing you cannot yet do is download the entire Help system as a PDF. That feature is coming next month: http://helpx.adobe.com/content/help/en/x-productkb/global/cs6-help-pdf-available-june.html
[shooternz]
I am kind of staggered that Adobe launched and released without Help Files for these CS6 products. Particularly in the case of SpeedGrade where I needed most Help. New and unfamiliar applications need Help Files for Users to get up to speed! Adobe are now relying on the cool Tutorial Videos (which have great value) but are hopeless in terms of such basics as "Setting Up" and trouble shooting. "RTFM"...What FM? I have put SpeedGrade on the backburner because of this. (I simply can not resolve some set up issues due to lack of available goto info.) May not get back to it for sometime actually.
That's not true, shooternz. Help files are available for every Adobe product. Just press F1. For Premiere Pro, the list of topics (table of contents) is here: http://helpx.adobe.com/premiere-pro/topics.html Keep in mind that this is a brand new Help system, and it took extra effort to complete the content and make sure that the system functioned properly. If there are any problems with the system, please let me know. For example, search needs to be improved and that is something we know about and are working on.
SpeedGrade Help is sparse because we just got the product 6 months ago. Given our time constraints, there simply was not enough time to develop a full Help system. On behalf of Adobe, I apologize for not being able to provide full documentation for SpeedGrade. I assure you, though, that a full set of Help documentation for SpeedGrade will be available later this year. In the mean time, if you have questions about SpeedGrade, check out the user-to-user forum here: http://forums.adobe.com/community/speedgrade
[Jeff Sengstack]
The issue is not how to access Help (pressing F1), it's how to access the old Help reference. The new Help system is community-oriented and does not include access to the old Help reference file.
Do you mean you want the CS5/CS5.5 Help without the CS6 content? It's available here on PDF: http://helpx.adobe.com/premiere-pro/archive.html
The "new community-oriented" Help is not new. We've been adding community content along with the reference content for some time now. If you mean to say the Help is only created by the community, that is totally incorrect. I am the writer for Premiere Pro, I include all the details of the new features, and I cull content to support the writing.
If one noodles around in community help, one will find bits and pieces of the old Help reference but no single source.
The previous Help content is included verbatim into current Help. It just has CS6 content added to it. It also "looks different" and is more search based. Again, search the PDF if you need to see the CS5/CS5.5 Help without CS6 content.
That is unfortunate, because Community Help is a cobbled-together, clumsy means to find solutions. Wheras, when using the old Help reference, it was a lot easier to quickly track down answers to basic questions.
I would really like to pinpoint what you are missing from CS5/CS5.5 Help. Why is it harder now to find what you need? The main differences I see is that there are no "next page" buttons, or hierarchy links. Is this what is bothering you? By the way, you can return to the topics page by clicking "Adobe Premere Pro Help" in the upper left of the page.
[Wodehouse]
I thought something had gone wrong with Master Collection installation because not a single product has any HELP guide!!!!
Help systems are no longer managed by the Community Help Client and are now handled by the Adobe Help Manager. There may be edge cases where Help might not appear in previous systems. Check the Adobe Help Manager and see if you can have access to the Help that you want. More on the Adobe Help Manager in this thread: http://forums.adobe.com/thread/1000134

Does adobe Premiere Pro CC edit and export 4k and higher video resolutions?

Hey Guys I am new the forum but have been using adobe products for years. I am having some problems finding if Adobe Premiere Pro CC effectively lets you edit and export video at 4k and higher. I am having a custom built computer to specifically handle high resolution output and video editing. I have a 5k monitor to go with it as we;;. Long story short is I need to make sure I can edit and export at full resolution. I am not interested in compressing the video output to 1080P from a 4k video input source. It would be a shame if I have to learn a completely new software program for my business because I have loved previous versions of the adobe premiere pro. any help with this would be greatly appreciated. I am expected to get my custom build back this afternoon. Thanks in advance for any help provided!

Yes

Export problems with relation to audio in Adobe Premiere Pro HELP!!

I have been working on a school assignment for media on Adobe Premiere Pro CC and have come across a very frustrating issue that I have no idea about how to solve. it goes under the category of a 'technical difficulty'.
As I have alot of interviews and talking in my project for my Documentary I am shooting on Bullying for my Current Affair I have alot of audio to deal with and with my Rode VideoMic Pro when in conversation in the midst of an interview there is a constant 'hiss and crackle' that one can hear when watching hence I have used the audio affect of "DeNoiser" to get rid of this and it seems to work great on my workflow in my sequence in Premiere as I have reduced most clips to -15Db's. But when I export my project as I have done several times,the 'Denoiser' affect doesn't work for the first 3 seconds + for all clips that I have used to affect for. At the start of all the clips used with the affect there is a constant hiss and crackle and after 3 seconds it fades out??? Please help me with this very unusual problem as I want this to be a fantastic film on your fantastic software!
Thanks

I would not return Adobe, I would return the camera, it is not suited for editing. If you insist on editing that material and end up with pretty crappy results, play it out from a DVD player into a good tape based DV video camera thru analog in and pass it thru to firewire for capture.
To put it another way, when maximum achievable fidelity of video is 100, your camera is at 10% due to the heavy MPEG compression. You need to convert that to DV and you are left with around 8% due to DV compression, you then need to encode it again to MPEG and you end up with less than 1% out of a possible 100.

NVIDIA GPUs for Adobe Premiere Pro CS6 | NVIDIA and Adobe Solutions | Adobe TV

Sean Kilbride from NVIDIA talks about how Adobe Premiere Pro CS6 and NVIDIA GPUs were used in the editing of the Heavy Hand music video.
http://adobe.ly/QaVPwR

I'm playing around with the trial of CS6 right now. At first I wasn't getting the option to use GPU rendering until I added my card to the supported list (GeForce GTX 670). Unfortunately my playback is still laggy, just like when it was on software mode. I'm trying to watch 1080 video that I recorded using software on my computer.
I have an i5 2500k at 4.3GHz, 8GB ram, and two 670s in SLI.
I have premiere pro cs6 running on my main SSD, and my scratch disks set to my single platter 7200 RPM hdd. In the past on CS5 I was able to have my scratch disks set to the drives I have the original files on with no lag.
What can I do to get smooth playback?

I want to reactivate my adobe premiere pro 2.0 and cannot. what can i do

Downloading, Installing, Setting UpPremiere Pro want to reactivate my adobe premiere pro 2.0 what must I do
@

You need to download a special version and use a special serial number to activate.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Sound Blaster, Adobe Premiere Pro 1.5 and ASIO st

adobe premiere pro .5 does not recognize my sound blaster card as a 5. surround card... so i can't mix in surround sound... the only input/output device in premiere is the default windows sound .5.... when you look at the list of speakers in premiere it only shows two speakers with SB Audigy sound card, instead of the 5. surround speakers. does anyone know what to do about this? sorry about the long post.

I don't know, but go to this Tutorial http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/ and read

Adobe Premiere Pro Help | Importing still images

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/importing-still-images.html

I might be incorrect in this, but think that there is a Ps Script, that will do what you want.
I would ask in the Photoshop Forum: http://forums.adobe.com/community/photoshop
and also in the Photoshop Scripting Forum: http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
If my memory is not totally hosed, one of those should yield the Script (if it exists, as I claim to remember) for that task.
Good luck,
Hunt

Adobe Premiere Pro Help | Overview of audio and the Audio Mixer

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/overview-audio-audio-mixer.html

The last section "Customize a VST effect in an options window" for a beginner working their way through the manual makes no sense. VST and how to apply it is not explained, and no explanation appears prior in the manual. To be blunt, it's just a nonsense.

Adobe Premiere Pro Help | Transferring and importing files

Similar Messages

Maybe you are looking for