Adobe premire  CC will play audio but not video

Hello guys I'm having an issue i recently upgrade my pc and added a second video card I have two amd readeon r9 290 with crossfire enable. Last night after installing both video card I ran premire and it would show the thumnail of my video but when i played it back only the audio would play but not the video.
Pc specs
Cpu: amd fx 8350
Motherboard sabertooth 990fx r2
2x readon ati amd r9 290
Thanks in advance for the help

http://docs.info.apple.com/article.html?artnum=302828

Similar Messages

  • Flash player 11.6.602.180 plays audio but not video...

    Very similar to problems reported by others.  Just started recently... flash player  on Win 7 and IE 10 plays audio but no video... just black box or blank.
    Have reinstalled flash player several times... including following all clean install instructions several times.  Installation completes and and tells me it's installed successfully.
    Have carefully matched IE settings to allow activeX content and have enabled the flash player object and turned on active scripting for all zones, etc.  Still no video.
    Going to the flash verification page shows a blank box where the current installed version should be.
    If I look in control panel under Flash Player it tells me the activeX version is 11.6.602.180 and that the plug in is "Not Installed"... could that be the problem?
    What can I do to fix this?  Thanks in advance for any help.

    What is your display adapter, device driver version and date?  See http://forums.adobe.com/thread/945765

  • Burned dvd plays audio but not video

    I just completed the first part of a wedding video and it burned fine. I just finished the second part and it looks and plays fine in imovie and idvd preview. However when I burn it and try to play it the dvd will only play the audio. the dvd starts like it's going to be fine, but the video stalls on the first frame and the audio continues. does anyone have any suggestions. I am trying to avoid starting over, but I don't know what else to do. I tried eliminating the first clip in case it was corrupt, but that didn't help.

    First thing you might do is in iDVD, use the menu option to "Delete encoded assetts" in case the previous garbage from the last project or burn is messing things up. If that doesn't work here are my standard list of things I do when I have issue or even just before I go to burn a new project...
    Run Cache Out X (free download) to clear all system and application caches.
    Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
    Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
    Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
    Reboot your Mac.
    Patrick

  • Chromebook flash player works except at IMDB, plays audio but not video for movie trailers.

    Using Flash version 15.0.0.189.
    14 q039 Chromebook
    I have been using my new HP Chromebook for a couple of weeks now.  Very trouble free and fast, with little bloatware.  This leaves me with time to pursue funny little inconvenient glitches like trying to figure out why I have audio and a black video screen in native (small) and full screen modes at IMDB (Internet Movie Data Base).  Yes, I tried their FAQ and the Adobe FAQ without a resolution.
    I am an old mouse who knows that somebody above the maze that I am in, will know exactly where the cheese is.

    I'm having the same problem on both windows and mac OS. This seems to be a bug because QT 7.6.5 plays them fine on either machine, but QT 7.6.6 does not. I have over 2000 files encoded using h264 which played perfectly before the upgrade. I tried logging in under a different user which does Not work. I notice also when I view them in the finder window there is no poster frame, only the letters MPEG4 under the quicktime logo
    I hope this is an easy fix. I don't want to re-encode all those files and upload them to my web gallery.
    Help!
    Thanks

  • Front Row plays audio but not video of MP4 H264 AAC files

    SL 10.6.6
    Here's the problem:
    Take an MP4 movie file encoded with H264 and AAC thats plays with no problems in QT, iTunes, Front Row
    Open this file in QT7Pro, add a mask using a GIF file then export as MP4 using video and audio pass through to avoid re-encoding
    The new video file plays OK in QT and iTunes but only plays the audio track in Front Row - the video is just presented as a blank screen
    This happens to every file i've tried it with.
    I've tried trashing all front row caches/prefs/app support folders, installing/uninstalling/re-installing perian. i've tried changing the file extension to .mov .m4v .3gp - still the same problem the file plays perfectly except in Front Row
    All the posts I can find on this topic seem to refer to subtitles causing a problem - these files have no subtitle track
    Any suggestions?

    I have faced the same problem exactly. Some seasons and one movie I have detected so far, do not show any video at all. If I open the same files in iTunes, they show ok. If I open the same files in QuickTime thought no video also. I guess it has something to do with QuickTime then. Try it yourselves in order to see if it is the same problms with you guys. If that is the case I will try to extract an older version of QuickTime from the installation package via Pacifist and see if that works.
    Even if it doesn't work I am pretty sure they will come up with a new update fixing this, but the point is that Apple isn't used in making bugged updates, up until recent. What is wrong with them lately?
    Anyway, as soon as I have news in the afternoon I will let you know

  • Project plays Audio, but not Video

    I was working on a video project and opened *Precision Editor* on a transition. After editing the transition, the clips won't play the video, although the audio in the project plays just fine. This has affected all clips in the project, as well as all the other movie projects in the library that I was not working on at the time.
    All the videos still play fine in the event library, it is just the project area that has this issue. After this occurred, I downloaded the iMovie update, but that hasn't fixed the problem, so I tried to reinstall from the disk, still no luck on fixing the issue. Any thoughts on what I may have done here?

    As I posted today, just noticed this as well. Imovie worked just fine about 2 weeks ago.
    http://discussions.apple.com/thread.jspa?threadID=2298823&tstart=0
    can someone merge these posts? It seems like a recent concurrent issue.

  • After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

  • IMac will play DVDs but not CDs

    My 2009 iMac will play DVDs but not CDs (bought music CDs and burnt CDs). The last time I tried (successfully) was December 2013. Can anyone help?

    Start a new topic and don't hijack this one.  You're problem is different from the OPs. When you start the new topic give your system version, iMac year and model and what type of CDs you can't read, i.e. commercial or those you created yourself.  Also if you can read DVDs.

  • HT204291 Plays audio but no video sometimes

    Can someone help with my apple tv 2 playing audio but no video sometimes.  The icon comes up in the bottom corner the same as when I play a song and the video does not come on once Ina while.

    paulfromrivercity wrote:
    Is that because AirPlay will not do streaming videos, just ones already loaded on the device?
    It's as clear as mud but the explanation is here.  My interpretation is that it's a licensing issue.
    AirPlay DOES do streaming videos.  Crackle is one example.  Netflix is another but, in the case of Netflix, there is no need for an iPad/iPod.

  • Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Also, the movie files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
     Cheers, Tom

  • Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    What site are you trying to watch?  I just tested 3.  The you tube app streams from the pad to apple tv fine, as long as the source video format is ok.  Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine.  A few have a different format, and do audio only.  Netflix does not stream at all, but you can get to netflix directly from apple tv.  Whether or not it streams is directly related to the format of the video.  Some do, some dont.

  • Blu Ray Burned in Encore CS4 play audio but no video

    I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?

    More information needed for someone to help
    http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
    Odd Errors http://forums.adobe.com/thread/670174?tstart=0
    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
    Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

  • Getting audio but not video during playback using Airplay-

    I'm using my iPad 3 to stream content from my Amazon Prime video account the via Airplay to my Apple TV. I'm getting the audio, but not the video. Are these units capable of doing what I'm trying to do, do I have to set up certain settings to do this? Help!!!

    How do you know or find out if that's indeed what they're doing of if something is after all technically awry?

  • HT201335 I just installed my apple tv set it to mirroring and it worked perfect.  one hour later it will play audio but the picture does not come up on the screen to mirror my ipad.

    I just installed my apple tv and set it to mirroring and it worked perfect.  One hour later it will will only play audio on mirror, it does not show the screen image of the ipad on the tv.

    restart ipad, appletv and wifi router

  • Clicking on Transition and Title browsers causes '11 iMovie crash and projects/events play audio but no video

    After several years of working fine, my old iMovie started acting funny. Clicking on the Transition or Title browser would cause it to shut down. I just bought/downloaded the "upgrade" to '11 iMovie, 9.0.4, yesterday, and now, not only does it still do the same thing, but the projects or events won't play any video portion, only the audio.
    I'm running 10.6.8 on an iMac

    I seem to be having the same problem. I'm running a mac mini and I have like 5 photos, 1 song, and 2 movie clips (not a lot of stuff) in the movie, and when i go to preview it... I see the pictures, and hear the music... but no video.

Maybe you are looking for