Adobe Presenter 9 quiz results reporting to LMS

We have over 50 users of AP9, and currently use a Success Factors LMS. Our AP9 quiz results are currently reporting only the cut/mastery score to the LMS student transcript, not the actual score the student gets. Any ideas? I've read all the help and tutorial material and it does not address the actual score reporting anywhere. What are the correct quiz and Reporting options settings to get actual scores reported for a final quiz? We SCORM wrap v1.2. Our LMS suppport says it is pulling what AP9 sends- which is the cut score. When we test as a learner, we can get 100% but if the mastery score is set at 80% we see as a learner we acheived 100% but only 80% score goes to our transcript. Does AP 10 function differently in this aspect than AP 9?
Thanks, Elizabeth

Hello,
I am experiencing a similar issue. Was a resolution ever found?

Similar Messages

Adobe Presenter Course not Marking Complete in LMS

We have a course built with Adobe Presenter and was loaded into our LMS (sumtotal 7.5). After completing the course, it is not marking completions.
Here is what the settings are set for the course in Adobe Presenter:
- enable reporting (checked) for SCORM
- Incomplete--> Complete
- success/completion criteria = user access
- data to report = quiz score = points
Any suggestions?

Hopefully your SumTotal folks may have an answer...likely this has come up before?
If not, better to ask in the Presenter forum (curiously hidden way in the Connect forum):
http://forums.adobe.com/community/adobeconnect/connectpro_presenter
Or check out this article - it's old, but maybe still helpful?
http://www.connectusers.com/forums/viewtopic.php?id=1891

Sending flash quiz results to an LMS

Hey Guys,
Using Flash CS3, having issues getting flash to send quiz results to a LMS. Using the Flash quiz templates, exporting with SCORM 1.2 compliance. The LMS is able to track times attempted and if the lesson was complete or not, however the quiz results don't reach the LMS.
I think this can be resolved in the actionscript or the javascript that gets exported with the HTML file
Apparently you can control the javascript functions with FScommands from actionscript
Something like fscommand ("LMSSetValue","cmi.core.score.raw" + "," + integer);
I don't know where in the actionscript this should be triggered from
I can't find documentation from adobe about this function
Has anyone else come across this issue?

In case anyone was interested in an answer to this
Apparently fscommands are an older way of getting data to an LMS
The current way of doing it is using an external class to handle calls to and from the LMS
Philip Hutchison's site http://pipwerks.com/ has alot of helpful information on this topic
A good starting point is here http://pipwerks.com/2008/04/27/how-to-add-basic-scorm-code-to-a-flash-movie/
Hope this helps someone

Adobe presenter 8 quiz problem

The default option for my quizzes had the font too small to see the text of the questions. When I made the font of the questions larger, the circles for clicking, the letters of the questions, and the question texts all ran into each other.
So I have a question:
1) Is there a way to change the theme or profile--I cannot tell which--on just the quiz questions? And if so, how?
THANK YOU!

That is not the problem, but thanks.
I have changed the size of the font and when I do that, the box to
check, the letter that numbers the answer, and the question all run
together. It appears that the size of the letters have been enlarged
but not the spaces between them. Any ideas?
I think it is possible that i could change this all by inserting a new
master slide into the presentation before the quiz, but I cannot seem
to do that.
Thank you.
Quoting alpi agarwal <[email protected]>:
alpi agarwal http://forums.adobe.com/people/alpi+agarwal created
the discussion
"Re: Adobe presenter 8 quiz problem"
To view the discussion, visit:
http://forums.adobe.com/message/5409679#5409679

Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Issue:
I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
Questions:
1. Has anyone used Presenter with CSOD?
2. Has anyone used Presenter with any SaaS LMS?
3. Which settings are required to acurately reports a status?
Thanks,
Dan

On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
Open the scorm_support.js file using Notepad, Notepad++....anything other than Word. From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
var g_nAPI = 1;
if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite. What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS. You can download the test suite here:
http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS. If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking! I would also try reaching out to your LMS's tech support if possible.
Rob
http://www.robrode.com/yabb/

Presenter 7 tracking quiz results without a LMS

Is there a way to track quiz results from quizzes recorded in Presenter 7, without having a LMS? Thanks.

Same exact question I have. I would like to place the presenter file on our GoDaddy server (ugh, I know, not my choice) and have a way for the course taker and us to be able to view the scores of quizzes as well as the final score of the course. Any help with this would be highly appreciated.

Adobe Presenter 8 Quiz Bug

I am using Adobe Presenter 8. I set up a 10-question quiz. When the user passes the quiz (score of 70% or better) it correctly directs them to the slide I designated. When the user fails the quiz (less than 70% score), the presentation gets stuck on the final question slide (it grays out and you cannot click on anything) and does not go to the slide I designated in this case. How can this be fixed? Thank you.

Hi Vikram,
We experience a similar problem with Presenter 7.0.6.
We are using Microsoft Office Professional Plus Version 14.06129.5000 on Windows 7 Professional
Our browser is Internet Explorer Version 9.0.8112.16421.
Quiz settings include infitnite attempts at quiz, one attempt per question, move to next slide after answering. In our situation, whether a user passes or fails the quiz, the presentation will not move from the last question slide to the final results slide. If we leave the quiz open, it will move to the next slide after 1:30 and play the audio on a blank page.
Any suggestions? Thank you in advance for taking the time to look at this!
Blair

Adobe Presenter 8 quiz multiple choice responses changing order

I published a quiz in Adobe Presenter 8.
After it was published, one of the multiple choice questions had the order of the responses literally listed as:
     B)
     A)
     C)
     D)
Instead of:
     A)
     B)
     C)
     D)
Has anyone ever experienced this before?
If so, is there a solution?
Thank you........

Hi,
What do you see on the the pptx slide (not in the published output).
Is it
B)
A)
C)
D)
or
A)
B)
C)
D)
If it is the first one , Please change in the pptx slide and publish.
If it is the second one, try to republish.
If the Issue still exists, please inbox me the pptx as well as the published output at [email protected]
Thanks
Alpi Agarwal
Adobe Presenter Engineering Team

Adobe Presenter Superset Quiz Questions

In AP7, can I create a superset of questions - say 10, and then have the program randomly select only 5 each time a quiz is executed?

Yes, you can subset the Questions and shuffle them in Adobe Presenter 7. Do following steps:-
1) Go to Adobe Presenter>Quiz Manage
2) Add Question Group
3) Add Questions say 10 questions (They all get added to Question Group created at step 2)
4) Edit Question Group
5) Under "Include" set the number of questions you want to view. Say 5 out of 10, so, enter 5 in "Include" combobox
6) Check "Shuffle Questions" checkbox, this will randomly show any 5 questions out of 10 question.
Hope this answer your Question.
Regards,
Shubhi

Exporting quiz results without an LMS

We are able to administer Captivate quizzes directly through our database system without an LMS. We need the results to be posted back to the database upon completion of each quiz.
Is this a PENS function? If so, how do we implement reporting results to the database? Our database developers can import the data in just about any format.

Nope. PENS is for automatically uploading the SCORM-compliant .zip file to your LMS repository, if your LMS so allows.
There's no way to do what you want *natively*. You have to hack the code to do this. If you've got smart JS programmers there, then you can likely do...
When you publish a SCORM compliant file, it outputs an HTML and JS file. The functions in that JS file, as I recall, look for the LMS API and send various datasets to that API as the lesson calls other JS functions.
Theory is you can edit that JS code to NOT look for and send to an API but send to a custom webpage/service instead... That webpage/service takes the data and sorts/stores it however you prefer.
Search around a bit and you may find more detail. I think Andrew Chemey wrote a how-to for this process on Adobe's website somewhere, likely in the CP resources section?
HTH
Erik
Rick just posted this in another forum
http://www.adobe.com/devnet/captivate/articles/store_cpresults.html
May be helpful!
(and may be what I was thinking above, maybe it wasn't Andrew...)

Quiz results reporting wrong score

I have a module with a 6 question quiz at the end of it. Each
quiz question is 10 points, but even when the user gets a 100% on
the quiz review, it only reports 14% to the LMS and I don't get a
complete status. I'm using the SumTotal LMS.
PLEASE SOMEONE HELP! This is maddening.

I will assume you are using Captivate 2.
Every time you create a simulation within Captivate 2 and
include buttons (eg. as navigations) these count as interactions
and are able to be part of all scorable objects.
Go to Project > Advanced Interaction and you will view all
objects (click boxes, text entry boxes, buttons, questions, etc)
that send scores. You will be able on this screen to see all the
objects that are sending scores including those of your 6 question
quiz.
Simply uncheck the boxes for the objects you do not want
scores to be recorded and leave the ones for the quiz checked. Now
your users will be able to get scores for only the quiz.
Let us know how it worked for you.

Adobe Presenter 8 Quiz issues

We're having issues with the way quizzes are acting in SCORM packages created with Presenter 8. Users are having the quiz freeze and unable to answer, some questions are already marked wrong when they start the quiz, and some questions (particularly matching questions) display incorrectly. We are using Moodlerooms Joule as our LMS. Any ideas?

I was having similar problem. So many that I gave up on the quizzes altogether.

Adobe Connect Captivate quiz results

Where do I find the results of a quiz by user after a quiz is uploaded to Adobe Connect?

Hello,
Welcome to Adobe Forums.
Do you have 26 different projects ?
Which version of Captivate are you using ?
Do you have MAC or Windows ?
Any Error message while generating results for those 5 courses ?
Thanks,
Vikram

Verifying quiz results in non-LMS situation

OK, I am looking at using Captivate for online training
tutorials, using quizzes to confirm that users have watched the
tutorial and gained a basic understanding of the material. A key
requirement is the ability to verify results for each user.
I see that there is an e-mail option, which supposedly allows
the user to send an e-mail upon completion of the tutorial, but
from what I've read in past posts, it appears that this is a flawed
feature.
Does anyone have a sound solution to the issue of verifiable
results when not using LMS?
Thanks very much!

Hi,
You can try out this solution -
http://www.adobe.com/devnet/captivate/articles/store_cpresults_05.html
Thanks
Jayashree

Help in setting up Quiz Results Analyzer

Newbie here, Captivate 7. I followed directions on http://tv.adobe.com/watch/publish-and-track-results/reporting-using-lms-or-internal-server / except that I placed the internalServerReporting.php and internaserverread.php files in a folder named "cplms" on my web hosting service (linux). Looks like this:
My experimental courses' quiz results appear to get posted there O.K. and accurately, in the "CaptivateResults folder that was created as you can see. However, when I set the Quiz Results Analyzer preference to http://www.mydfb.com/cplms/internalserverread.php and "get results", I can see it going through the process of "checking companies", etc. but I get this result:
Note that the source is my "cplms" directory, but I get only 2 dots (parent directory?) in both the Organization and Department pull down lists. And under Course I get a list of all the files and folders in the parent (www) directory.
Obviously I'm doing something wrong in my setup. I've played around for hours with variations but can't get anything to work. Do I have to 'publish' my Captivate course on the same server as in the Adobe video tutorial?
I can FTP the "CaptivateResults" data back to my desktop machine and then point the Quiz Results Analyzer to that data and it works fine, but that's a bunch of extra steps.
Thank you - any help is appreciated.

Sorry mkjohnson74, but no one seems to want to help us. I don't think the Quiz Result Analyzer is ready for "prime time". It would be very nice if someone had put together a detailed (for newbies) guide on how to use it. In the meantime, I have found Widget that I think does an even better job of reporting than the Quiz Result Analyzer claims to do - and it was easy to set up and REALLY WORKS.
Download a free copy of Jim Leichliter's Google LMS With Email Reporting at http://captivatedev.com/2012/11/12/adobe-captivate-6-x-widget-google-lms-with-email-report ing-2/ . Install it by following his two excellent videos that are also on that web page. It works so well for me that I'm thinking I can eliminate my current LMS. I did run into one problem (because I didn't follow instructions) but Jim responded immediately and got everything fixed.
I hope this helps.

Adobe Presenter 9 quiz results reporting to LMS

Similar Messages

Maybe you are looking for