Adobe Presenter 9, Training

Does anybody know if there is any training (classroom, face to face style) for using Adobe Presenter 9 software.?

Hello TeleWareTrainerRay Upson
You may want to refer this# http://www.adobe.com/support/training/instructor_led_curriculum/using_presenter_7.html
~Deepak

Similar Messages

Adobe Presenter 9 Video Editing

I have a question for anyone who can answer this:
Would Adobe Presenter 9 allow me to take a longer video and cut it up into smaller pieces to incorporate into a presentation? I have a slide deck being used in conjunction with recorded Instructor-Led Training. The recording for the ILT I believe is going to be one, continuous recording that lasts approximately 4 hours long. I need to be able to go in, cut out the pieces of the recording I need, and put them into my presentation to correspond to the slides. Will Adobe Presenter 9 allow me to do this level of editing?

No, Presenter doesn't have any video editing functionality worth mentioning. The little bit it does have is not going to help you. I would recommend that you look at a video editing tool to make the breaks in the full recording and then import the clips using Presenter. I'm sure that there are many free or low cost options. I personally like the AVS suite of tools, as they cost $59 for a lifetime of upgrades and support. AVS4YOU Top-ranked multimedia tools. Don't let the sale fool you, I've never not seen it on sale.

"Object Variable or With Block Variable not set" Error on Adobe Presenter 8 Ribbon on PPT 2010/2007

Returning back from Adobe training at KEDRIYA VIDYALAYA no 1 Jalhalli Bangalore when I started Powerpoint to use Adobe Presenter 8 I am getting : "Object Variable or With Block Variable not set " error on clicking any of the menu features of the Presenter Ribbon. My Config are :
i)             WINDOWS XP SP 3
ii)            POWERPOINT 2007 / 2010 ( for both same error is coming)
iii)           MS XML Library 4.0 installed.
iv)           Adobe Presenter 8
I am using all liscenced copies of softwares.
Hardware specs are also as per Minimum Adobe standards.
I Have tried a lot removing Data Execution Prevention Mode , but all in vain the problem still exists
Why is this happening. Please help.
Kamal K Gupta
PGT Comp. SC.
KV No. 2 Srivijaya nagar

This is not really a "Downloading, Installing, Setting Up" question; you may get better help if you ask in the Presenter forum.

Best Adobe Presenter 9 resources?

I'm having trouble finding good Presenter resources. I've been playing with it a bit and looking on YouTube, but I want to learn how to make tests that collect results, etc.
Any help would be appreciated.

There are some tutorials here: http://blogs.adobe.com/captivate/adobe-presenter-tutorials
There is also the option of setting up an official training as well. Feel free to PM or email me, jorma[at]realeyesconnect.com, if you would like to look at that option.

Downloading adobe presenter 10

How do I download Adobe presenter 10, I have already purchased the License for a single user.

You can download the trial version and use your serial number to activate.
Adobe Presenter 10
Buying Guide - Education and Training Software | Adobe Presenter 10

Can I upload PowerPoint directly into Connect without using Adobe Presenter?

I have a PowerPoint file (.ppt as well as .pptx) and the slides are fairly simple - mostly bullet point lists in Arial or Calibri font (nothing wild and crazy). When I upload the content directly into the Connect envrionment, the formatting of the slides (in the share pod) is all wacky. Instead of it sizing the slides to fit the share pod, the bullet points go down past the bottom of the pod and cannot be read.
I was told that the only solution to this is to purchase Adobe Presenter and publish my PowerPoint files (using Presenter) into Adobe Connect. That is not an option for me at my company. It seems like uploading a simple PowerPoint should be a basic feature of Connect without having to download/purchase Presenter licenses. Maybe I'm wrong. Below are a few images in case this is not making sense. If anyone has advice, PLEASE let me know. I cannot possibly using connect for virutal training if slides look the way they do below. Thanks!
The first image is the PowerPoint slide
Here is what it looks like in the Share Pod:

Thanks Robert,
I tried to ask Adobe for a short list of supported / unsupported fonts but the tech kept telling me he could not give me that information. I thought I tried Arial to no avail but I can do so again. Just reformatted everything in Garamond and it worked fine.
Thank you again.

Adobe Presenter - AICC No Completion in Saba

I am currently testing integration with Adobe Presenter courses using the Saba LMS and AICC import. The training content is on a different domain than LMS so I have used the frameset and crossdomain.xml workarounds suggested in another Adobe forum post. Everything is fairly successful, however, even when I have completed the content according to the completion rules set in Adobe and the content module (lesson) shows as complete on My Enrollments, the course is still showing as Not Evaluated in general and is not moved from My Enrollments to My Transcripts. I tried with Captivate and it is updating the content module (lesson) complete in Saba and also marking the course as complete and moving to My Transcripts.
Why is Presenter not working the same way? Any advice is appreciated. Thanks!

First, the best place is probably the Presenter forum, which somewhat curiously is under the Connect umbrella:
http://forums.adobe.com/community/connectpro/connectpro_presenter
Out of curiousity, why are you using AICC? Because the content is on a different domain?
To the point, it's great to have a logging or debugging tool for these sort of things to view the communication between the LMS and the lesson. Perhaps the lesson is sending the 'completed' status but also sending some other value that the LMS is using to change the status back to incomplete?
My first suggestion would be to try the lesson in a tool like TestTrack...but I don't think that handles AICC. Does the Saba LMS have any kind of debugger or logging tool you can use? You really need to see if the lesson is sending the status back to the LMS as you suspect it should. If it IS, then the issue lies with the LMS and how it's interpreting that result. If it's NOT, then you can then perhaps figure out what to adjust in the lesson.
In general, just play with the settings. If it's set to Complete/Incomplete and has a Mastery Score, try NOT setting the Mastery Score... And other such combinations.
I hope the folks in the Connect/Presenter forum can provide more insight.
Erik

Publishing in Adobe Presenter

I have created a training simulation (practice exercise for
the learners to perform certain steps in an application) in adobe
captivate, published it, and inserted the swf in a Powerpoint
presentation. However, when i publish the PPT file using Adobe
Presenter, it takes the simulation as a self-running demonstartion.
When I do not checkmark "Control Using Presenter Playbar", it
takes it as a practice exercise. However, in this case, it takes
the default screen time for screens without audio (for example, 30
seconds) and does not let me complete the practice exercise. Please
help!

Is embedding a Captivate project in Presenter something that
is
specifically supported?
It sounds like the issue is a classic case of layering - the
CP file
expects _root to be its top timeline, but when inserted into
another
SWF, _root is now THAT SWF's top timeline...
Unless embedding a published CP file in Presenter is
something that is
specifically supported, I don't think there's a workaround
for this (not
one I'm aware of). Essentially, you'd have to get CPs calls
to stop at
its expected _root, not the parent (Presenter's) _root. Not
sure how
that's done.
Erik
rashmi23 wrote:
> in adobe captivate, published it, and
> inserted the swf in a Powerpoint presentation. However,
when i publish the PPT
> file using Adobe Presenter, it takes the simulation as a
self-running
> demonstartion.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Adobe Connect Crashes During Adobe Presenter Upload

Windows 7/Adobe Connect 9/Adobe Presenter 7.07 Build 7754/PowerPoint 2007
Adobe Presenter technical support tells me it's an Adobe Connect problem because I can pubish inside Presenter without a problem.
I have uploaded numerous PowerPoint presentations with quizes over the last few years without a problem. The problem seems to have started when I got a new computer with Windows 7 (old was XP Pro). The error I get is either the classic Internet Explorer 'page cannot be found' or the presentation gets to Connect but with the stock Request Not Processed.
Here's what I've done to troubleshoot:
Tried same process using using Firefox and Chrome and still get the errors
Created one single powerPoint page without any formatting - a title slide with 'Text' in both fields and this works
Tried an unformated (text only) full PowerPoint presentation without the quiz and it gets the Request Not Processed error
I did not try quiz only for seemingly obvious reasons
Your thoughts will be duely appreciated!!! TIA!!! The training I develop is essential to our quality standards.

It sounds like a network issue. You say you have connected in different locations, did you connect in a location where others were not having the issue? Could your IT staff work with you to identify why you may be having connectivity issues?
If everyone was experiencing the problem, then I'd be inclined to say it was an issue with your Connect account, but being isolated to you, it seems like the problem may be local. Sometimes wireless routers get overwhelmed in busy environments, and may cause some individuals to see temporarily lost connectivity. Other times it may just be a wireless router going bad. If you are hard wired, then it may be router that is beginning to fail. Be sure that when you test other locations, you are connecting to different hardware.
Since you are running the add-in, I don't believe the browser should make any difference.

Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Issue:
I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
Questions:
1. Has anyone used Presenter with CSOD?
2. Has anyone used Presenter with any SaaS LMS?
3. Which settings are required to acurately reports a status?
Thanks,
Dan

On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
Open the scorm_support.js file using Notepad, Notepad++....anything other than Word. From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
var g_nAPI = 1;
if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite. What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS. You can download the test suite here:
http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS. If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking! I would also try reaching out to your LMS's tech support if possible.
Rob
http://www.robrode.com/yabb/

Import Captivate Flash into Adobe Presenter

I'm using a combination of Captivate and Presenter to publish
online training to our intranet. I've successfully completed 3
learning modules, but this one's giving me a headache. It contains
3 separate Flash files, 2 of which originated with a Captivate
file. Those 2 don't play correctly once I've published the
Presenter file to our web server. The screen goes blank several
times during playback. I've never had this problem before. Is it a
memory issue? Is there some setting I can change, either when
publishing the Captivate file to Flash or in Adobe
Presenter?

Hi there rizakag
Double check to see if where the blank areas are happening
are tied to slides inside the Captivate project where full motion
clips are. (You should be able to tell by looking at the Film Strip
that runs along the left side of Captivate. Full motion slides
typically have a large Camcorder icon in the corner.)
If so, it would seem to indicate that Presenter is not
handling these external files properly and there are other hoops
you may need to jump through.
Give that a go and report back with your findings.
Cheers... Rick

Keynote and adobe presenter

Is there a software product that will do the same job as adobe presenter, but work with a mac and keynote?
Thanks
Georgia

I will be out of the office starting 27/10/2010 and will not return until
29/10/2010.
During this time I will have no access to my emails. If your matter is
urgent, then please contact Sonia Savage on ext 10689 or you can reach me
on my mobile 07826291970.

Why Can't i use Adobe Presenter on iPad???

Hi there
I want to watch my lectures on Adobe Presenter as this is used by my teachers. How come it won't work on my ipad.
Is there another program i can use etc.
I need a solution please so i can watch my lectures.
Thanks for your time

You could try this free app https://itunes.apple.com/us/app/presenter-mobile/id517955602?mt=8 However, the reviews are not good.
 Cheers, Tom

Recording iSight Video plays back too fast in Adobe Presenter/Office 2010?

Adobe E-Learning Suite 2.5 installed over Microsoft Office 2010 Home and Student
Running Presenter within PowerPoint detects and records using iSight. But the Playback is too fast, chipmonk like.
Perhaps its an FLV codecs issue.
Running Bootcamp 3.2 Software on Windows XP SP3 on an Intel iMac Core 2 Duo 2GHz 1,5GB Ram

Hello,
Do you mean that when you see the video inside Video Creator, slide 10 appears for a split second and then jumps to slide-11?
Can you record the same scenario in diagnostic mode and send us the logs.
Follow these steps -
1. Close Video creator if it is already opened
2. In Windows > Programs > look for "Troubleshoot Adobe Presenter Video Creator"
3. Launch the same and record the exact same steps
4. Stop recording > Ensure that the issue has been reproduced.
5. Close the application.
6. While closing, it will prompt you to send us an email with collected log reports.
Kindly send the logs. We will go through it and get back to you.
It will also be great if you can send us the presentation in which the issue is reproducible.
Regards,
Mukul

Adobe Presenter failed to open because either it is not licensed or there is an error.. Help!

I have been using registered version of Adobe Presenter ( I have a serial number) for some time. Now I receive the following error message:
"Adobe Presenter failed to open because either it is not licensed or there is an error in the licensing system. Please close and re-launch PowerPoint and enter
serial number to license it. If this problem persists, reinstall this product and try again."
The registration page pops up but just briefly--too fast to click the accept/decline buttons. I have tried deleting the Office and Adobe preference files under User as well as uninstalling/reinstalling but the error message persists making presenter unusable. I also tried to install just a a trial version but also receive the same error message.
System is Win 7. As I said I have been using it for over a year successfully.
What can I do to fix this?
Thanks...Dave

Thanks Nirupam. Here are the answers.
The hardware for recording audio is simple mini-phone plug to mini-phone jack in the back of the computer. The driver is HD compatible (Microphone High Definition Audio Device)
After recording, I am able to replay it, but Powerpoint crashes soonafter, and not predictably.
So far I have added no markers or specified any actions.
Specifically, I have taken enumerable actions-- some of these per suggestions made in this forum (to the letter). Perhaps the most frequent action is to drill into Powerpoint options, and re-enable the Adobe Presenter add-in.
I have been able to apply neither the 7.05 patch nor the 7.06 successfully. Both failed (the error message said it wouldn't apply to this version of Presenter. Again, it's Presenter_WWE.exe).
I can see that you have ramped this up to known bug status. I appreciate that and am sure you'll come up with a rock solid solution.
As I've said earlier, one of Adobe's strengths, for me, is that they understand the needs and idiosyncracies of faculty. Faculty cannot handle geek solutions (like changing registries). After frustration, they will abandon and move on.
Thanks,
Glen

Adobe Presenter 9, Training

Similar Messages

Maybe you are looking for