Adobe Presenter 9 Video Editing

I have a question for anyone who can answer this:
Would Adobe Presenter 9 allow me to take a longer video and cut it up into smaller pieces to incorporate into a presentation? I have a slide deck being used in conjunction with recorded Instructor-Led Training. The recording for the ILT I believe is going to be one, continuous recording that lasts approximately 4 hours long. I need to be able to go in, cut out the pieces of the recording I need, and put them into my presentation to correspond to the slides. Will Adobe Presenter 9 allow me to do this level of editing?

No, Presenter doesn't have any video editing functionality worth mentioning. The little bit it does have is not going to help you. I would recommend that you look at a video editing tool to make the breaks in the full recording and then import the clips using Presenter. I'm sure that there are many free or low cost options. I personally like the AVS suite of tools, as they cost $59 for a lifetime of upgrades and support. AVS4YOU Top-ranked multimedia tools. Don't let the sale fool you, I've never not seen it on sale.

Similar Messages

Adobe presenter import video impossible

Impossible d'importer une video avec adobe presenter 10 et microsoft 2013 win7 pro 64bits
Quand je demande une import de video, il m'ouvre automatiquement adobe encoder et plante l'import
alors que adobe presenter 9 et microsoft powerpoint 2010 win 7 pro32bits c'est ok

C'est ce que je fais !!
CordialementHerve Leclerc
On 12 mars 2015 16:30:47 UTC+1, Franck Payen <[email protected]> wrote: adobe presenter import video impossible created by Franck Payen in Forums en français - View the full discussion Bonjour. Je n'utilise pas Presenter, aussi je ne peux proposer que deux choses : - Une solution alambiquée consistant à préparer le travail / import sur Presenter 9 et ouvrir le document créé sur Presenter 10 (si cela fonctionne - Tenter sur le forum dédié (en anglais, mais vous avez un bouton Translate) Adobe Presenter If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7283229#7283229 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7283229#7283229 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Forums en français by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Adobe Presenter 8 Video Creator crashes when publishing

After capturing a video and demonstration using Presenter Video Creator, I am able to edit the video, choose whether I show talking head, demo, or both. The program seems to record everything as I would expect. However, when I attempt to publish, it goes to 5% and then gives me this error: "Application encountered an internal error." It does not matter if I try to publish to my computer, adobe connect, or anything else. I see so many great possibilities for this product, but if I can't publish, then it is completely useless to me. Does anyone have a fix for this?
Adobe Presenter Video Creator version: 8.0.1.260, 64-bit
Thanks,
JJ

Are you getting the internal error during publishing? or is there any other issue with the Video creator.
Can you explain the whole process at which you are getting the internal error?
The latest graphics driver provided by Intel is of version (6.14.10.5437) dated 2/13/2013.
Did you downloaded and installed the driver by traversing through this link http://www.intel.com/support/oems.htm
Did it throw any error while installing the driver?
Please mention your system name and identification number, i'll check whether your system manufacturer is providing any new updates for your graphics driver.
Also mention the name of the camera you used for recording.
Please make sure you are following the below checklist for recording any new video.
This is a general checklist that should be followed before using Video Creator.
Are your video card driver is up to date? Please check whether you have the latest driver from the manufacturer’s site.
Are all unnecessary applications closed?
Do you have sufficient free space on your hard disk? At least 5 GB is needed, but around 15 GB is recommended.
Are your webcam drivers up to date? It is recommended to install the webcam driver from the webcam cd or the webcam company’s site.
Are you capturing your video in a well-lit environment? Most webcams perform poorly in bad lighting.

Which Adobe Product For Videos Editing

Hi,
I have always been a huge fan of adobe but currently I am in a bad situation and I need your suggestion.
I am now put incharge of the video editing department, where our company make videos and send it to clients. It's a multinational company so imagine the professional customer.
The Videos will include Power Point presentation capture with Audio and a huge amount of Video Camera movies.
Our Company Manager suggesting Camtasia, Sony but I heard Adobe has a very good product as well.
Kindly suggest what Adobe Product and Version can support my requirement and also is it better and easy to operate than the above two products.
Thanks...
Waiting for your honest replies...

@Smith, John and Hunt.
Thanks alot, I was not expecting such a comprehensive and awesome replies.
Thanks alot..
Received a call from Manager and we will be using Two Technologies :), PowerPoint Capture will be done by Camtasia as we are already using it and have recently upgraded from 6 to 7.
@John I am abit confused on your last statement. Can you please explain it abit.
Let me clarify more my requirements:
We will be shooting on a 720P Camera or Cam Corders and I guess it's HD.
We will be conducting Interviews and more Class room trainings on a White Board.
We will capture that and remove the noisy or unwanted part and then distribute it online as well as on CD's or DVD's.
I guess it's pretty much simple.
So please give me your Final suggestions:
Director or Premiere Pro + Encore or Premiere Elements.
"Just Curious: Why Adobe has so many products for a single thing"
Regards,

Adobe Premiere Pro Video editing layer disappeared

I was working with Adobe Premiere Pro and then the video editing layer disappeared, it left me with Audio editing layer tho.

Try dragging down this line:

I have received between 18 and 22 error codes in attempting to install Adobe Presenter and Video Express. I need the program to work and no longer have hours to spend on getting this to work. Any suggestions/

Here are my Error Codes:
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DF023, DW063 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 18 error(s) ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com ----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Owner\Desktop\Adobe Presenter 10A\Adobe Presenter 10\Presenterwin32\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com ----------- Payload: Adobe Presenter 10.0 10.0.0.0 {50BB8FAA-F197-11E3-93FD-DBD677F87EC9} ----------- ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2029) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2029) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2028) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2028) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2027) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2027) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2026) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2026) ERROR: DF023: Unable to delete backup file at "C:\Users\Owner\AppData\Local\Temp\TalkToAdobeFlashPlayerTrust.cfg". Error 2 The system cannot find the file specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2025) ERROR: DW063: Error committing command ARKFlashPlayerTrustFileCommand(Seq 2025) -------------------------------------------------------------------------------------
System Requirements

uninstall those old ms vc packages and install the latest, Latest Supported Visual C++ Downloads

Adobe CS5.5 - video editing - CUDA cores - GTS450 or GTX460

Hi, I would like to know which graphic cards is better for video edition in a fluent mode.
Processor : I7 2500k
RAM : 8 Go
My interrest is for AVCHD 1080 50p processing in CS5.5
I really want to have a fluent used in CS5.5
Both GTS 450 1GB and GTX 460 1GB used CUDA technology but the number of CUDA cores is not the same.
Is the number of core a important factor for AVCHD processing ?
nvidia GTS 450 : 128 CUDA cores
nvidia GTX 460 : 336 CUDA cores
Is the number of core a important factor for AVCHD processing ?
Many thanks for your answers.

As a complement, I did an extact of the PPBM5 concerning 2 motherboard :
P67 and Z68
(Attached file is the excell sheet with the extract datas)
Same processor : I7 2600k
Same operating system : Win7 64
Same RAM : 16Go
It seems to be difficult to identify what is the performance key driver in fact...
Z68 seems not to be a good choice but why ?
Example :
Personal Computer   Id
Mlacom test OC
Gigabyte
Z68X-UD5
GTX 580
MPE gain : 2,7x
Personal Computer   Id
Novak   470
Asus
P8P67 EVO
GTX 470
MPE gain : 16,5x
All being equal, do you thing if I take the configuration of "Novak 470" (Personal Computer   Id) and only change the motherboard, I will obtain better results ?
I was sound that Z68 was better than P67 for video rendering
I'm a little bit confused...

Adobe presenter published video is fuzzy

Can presenter publish out in HD? I have publish quality set to Best, looks super sharp in the edit window but when published looks fuzzy!

Presenter outputs exactly what is in the presentation. However, you should consider that your HD video is being compressed to fit inside the frame that is scaled to fit on the viewer's screen. So, just like a large image compressed to fit in a small space, there is a quality loss.
You may find that re-encoding the video to a lower resolution will result in a better quality video experience overall.
Also, are you importing MP4 or FLV video files or something else?

Adobe Presenter & MP4 Video

In Presenter 10, can I use PowerPoint to produce a MP4 video with quizzes and also able to view learner interactions?

No. Presenter doesn't output to MP4. You may want to look at Captivate for that.
However, keep in mind that MP4 is a video, which means there is no interactivty. No tool will output an MP4 with quizzes and learner interaction tracking. You are looking at outputing to either Flash (SWF) or HTML5. Both Presenter and Captivate can output to either format (thought HTML5 does have some limitations on functionality) and can have quizzes and track learner interactions. Either format can have MP4 content within it, but they won't be straight up MP4's.

How to link to a youtube or vimeo video in Adobe Presenter

I am new to using Presenter, and am having trouble inserting videos in Adobe Presenter (the videos are often over 1 hour in duration) and am wondering if it's possible to instead insert/embed the link to the video, which is hosted on either YouTube or Vimeo. Is there a simple way to do this?
Thank you for your help!

Hi akuswara3, thanks for your reply.
Unfortunately, it appears that that the method I originally posted (above) is now broken in Presenter 8 and 9. The YouTube video still plays fine, but otherwise the entire Presenter interface breaks as soon as the video is played (all clickable items stop responding).
That being said, you don't really need to be a Flash developer to create an SWF handler for a YouTube video. If you have access to the Flash development application, then all you need to do is
Open Flash (from your CS6 bundle)
Paste the above ActionScript into the "Actions Frame"
Modify the script according to the instructions above to make the script call the desired YouTube video
Click File->Publish to output a SWF file.
That's it. Google's YouTube API (and its AS3 interface) simplifies the matter, doing all the heavy lifting for us. The end result will be a SWF file that uses the YouTube API to call, load, and play a YouTube video. Anywhere you can embed that SWF file, you can play a YouTube video.
Unless, of course, Adobe does something to break it.
Oh BTW - as for your last question. I do believe that the newest release of Adobe Captivate allows for HTML embedding, including <iframes>. This would effectively eliminate the problem altogether, as you could simply embed YouTube videos using the <iframe> embed code that YouTube generates for you.
But for now, the best way to get a YouTube into Adobe Presenter is via hyperlink (very disappointing). Instead of a plain text hyperlink, I'd suggest a screenshot of the video and hyperlinking the image instead - or at least creating a "video button" in the PPT (better interface communication).
Message was edited by: n.maxwell

Adobe Presenter/ Edit Audio Feature

I am struggling with Adobe Presenter and the edit audio feature.
First, I am in a Win 7 environment with Administrator rights. Second, I am using MS Office 2010 (PowerPoint 2010) and Adobe Presenter 7.0 (as a part of Adobe E-Learning Suite CS4).
I recently imported into my Powerpoint presentation a large MP3 audio file (137 MB) using Presenter's audio import function. Presenter imported this audio file with no issues. But since the import, I experience some odd behaviors with Presenter. The first issue is that the Move To Next Markeroption (Ctrl M) is grayed out so I am unable to mark where next slide goes. The next oddity is sometimes when the play feature in engage, the position indicator moves, but no sound is played.   My speakers are on and it just played a few moments ago.
I have reconverted the mp3 and re-imported it multiple times. I have tried importing a WAV file in lieu of the mp3 and still experience these issues. The only thing that I can find that clears it is to close out PowerPoint/Presenter. Then, I have to relaunch the file. At first it will work, but then it will return to this odd behavior.
Any suggestions for a remedy would be greatly appreciated.
Thanks very much.

Hi Vikram
Thank you for the suggestions.
I have completed the tests and updates mentioned below but am still waiting for the client to test the recording again.
Are your video card driver is up to date? Please check whether you have the latest driver from the manufacturer’s site. Point 2 below will help you in finding the manufacturer’s identity.   – Yes driver has now been updated
Are all unnecessary applications closed? – have advised client to close all unnecessary apps at next recording
Do you have sufficient free space on your hard disk? At least 5 GB is needed, but around 15 GB is recommended. Yes – more than 100GB free
Are your webcam drivers up to date? It is recommended to install the webcam driver from the webcam cd or the webcam company’s site. Using the inbuilt webcam only – the test with external webcam was on a loaned device
Are you capturing your video in a well-lit environment? Most webcams perform poorly in bad lighting. Yes the area is well lit
After the next recording I will let you know result and include screen shots if it is an unsuccessful test.
Thanks
Leslie McInnes
Educational Designer | Faculty of Education
Australian Catholic University
E: [email protected]<mailto:[email protected]> W: www.acu.edu.au<http://www.acu.edu.au/

I need help in using Presenter 9 Video Creator

I'm struggling to get started with Adobe Presenter 9 Video Creator.
I need detailed, step-by-step instructions but the information that I have been able to find is far too sketchy. I have looked in the "Presenter Help and Tutorials" and I have looked at several video tutorials on You Tube but none of them given me the detail that I need.
If anyone can help directly or can point me to good sources of information, please let me know.
With thanks,
Gerry

Many thanks for this. It helps a bit but what I'm needing is a proper manual with details of how things are done, possible snags and how to deal with them.
I have now had a bit of help from someone from Adobe and I may now be able to get round the things that were holding me up.
Thanks again.
Gerry

How to record a simple sidebar video as in Adobe Presenter 7

In Adobe Presenter 9, how to record a video with my webcam to put as a sidebar video for one slide ?
In Presenter 7 we could do that easily. Now with the new video editer we can make great videos and capture the screen. But that's not what need...
How to do a simple sidebar video without capturing the screen...
Look at the point 4 on this website: http://help.adobe.com/en_US/Presenter/7.0/WS56318F3C-65A7-477b-8CAA-2CBF0902BA5B.html
3-...Capture video...
4-...then select... ...sidebar video to record video for the Presenter image area.
It was easy in Presenter 7 !!!!!!!!!!!
Thanks

When you use the video recording feature in Presenter 8+, it does record a stand alone WMV of your webcam. While the workflow isn't as clean as before, it can be inserted back in just as a sidebar video, without the background screen capture. Here is how you can do it:
Use the Presenter Video Creator to record your video. Disregard that your screen is being captured, you won't use it.
After you record your video, Save your project. Don't publish it, as the published output is useless to you.
Back in Presenter, choose to Insert Video.
Browse to your webcam capture (My Documents > My Adobe Presenter Video Projects > {What ever you named the capture} > mt). Should be named something like presenter_video1.wmv
Presenter will convert it to FLV, you can select the quality and location, slide or sidebar, as in previous versions of Presenter.
If desired, you can use a 3rd part video conversion tool to convert the WMV video, but that may not be necessary.

Can't download Adobe Presenter 9 and Presenter Video Express for Mac

Hi, I am from Russia.
I need either Adobe Presenter 9 or Adobe Presenter Video Express for Macbook.
I cannot download either of them, because when I try to open "Adobe Presenter" "Adobe Presenter / Buy now" or "Try now", the page says:
Error processing your request
We're sorry, we encountered an error processing your request.
(http://www.adobe.com/cfusion/tdrc/index.cfm?product=presenter&loc=en_us&promoid=DJDVG)
As for the Video Express, the link leads to iTunes and the program says that the product is not available for my country...
I use Macair (I cannot insert discs). I am already used to downloading from the internet and paying with my credit card... but can you give me the links?

Adobe Presenter is a Windows application, so being able to download it may be irrelevant. The link you provided works for me, but again, I think you may need the Adobe Presenter Video Express tool, as that is the Mac application (and it's free). You should be able to get it from the Mac store, https://itunes.apple.com/us/app/adobe-presenter-video-express/id593844338?ls=1&mt=12.
Ah, I just caught that you are in Russia, not sure about the Video Express tool being available there, you may need to call Adobe and see what the avalablity is.
Message was edited by: Jorma Jennings

Video files cannot be read in Adobe Presenter 10

Errors
When attempting to embed a video file (mp4 or WMV) with Adobe Presenter 10, the encode finishes (it doesn’t encode automatically, so it’s done manually), but an error displays (This file cannot be read), so the video is not displayed.
Also, when creating a quiz, none of the text, aside from radio buttons and the Send button can be edited, such as the answers to the quiz.
PC Environment
・windows7 professional 64Bit
Software
・Microsoft PowerPoint2010 32Bit
・Adobe Presenter10 32Bit
Question:
Is there a way to solve either problem or know the cause of the errors?
Thank you very much for your time.

Your experience is better, than mine. I look after a website for a Electronics Servicing organization. I've created many PDF using Acrobat 3 - 7.0.7 (the older versions on OS9. I use OSX.3.9 on a G4-500 using 1.5 Gb of System RAM. And I uses OSX.4.5 on a PowerBook 17" using 2 GB of system RAM. Since switch to Acrobat 6 and then 7 I've never been able to have anyone view a PDF created in 6 or 7 Format. The File appears to be there and the file fize indicates it has content. Whether viewing on a PC or a Mac. If viewed on a PC all that is seen is a Blank page with no text, and if it had a graphic no graphic is shown. If however; the person on the other end happens to have Acrobat or Reader 6 they can view the Acrobat 6 Files. And If they have 7 they can see the 6 and 7 files as well as anything below. However; most of the PC viewers I deal with still use Acrobat or Reader 5. Its these viewers I find that can't view the files. I've noticed also that when you do getinfo on a Acro/Reader, or 7 File created on my computer that in the thumbnail preview, all you see is the Acrobat A symbol, or a Blank thumbnail. Opening in 7 they can be viewed. Opening in 5 (I still have a OS9 Drive and e.5.0.5 installed) all I get is a Blank page no text and no Graphics if any in the content. SO every since 6 and 7 have come out I've had to save, then optimize for Acrobat 5 in order for my readers to see the pdf's.

Adobe Presenter 9 Video Editing

Similar Messages

Maybe you are looking for