Adobe Print tab Problem

Hi
I have a problem with my adobe acrobat pro 6, when i click print the print tab is very large.
I have changed all the windows setting but only in adobe tabs i am getting this error.
The screen resolution is 1280/1024 and OS is XPsp2
Please suggest & help.
Regards
S.Sujith

Yes I have checked the font setting and display settings also, but only if I give print the opening tab looks big.all other windows or tabs are ok
Regards
Sujith S

Similar Messages

Adobe Reader Print tab Problem

Hi
I have a problem with my adobe reader, when i click print the print tab is very large.
I have changed all the windows setting but only in adobe tabs i am getting this error.
Please suggest & help.

Hi
Screen resolution is 1280/1024 , and its adobe acrobat professional 6 and OS is XP.
Regards
Sujith S

Adobe Print form problem

Hello,
I have a funny problem. Well, this is the first Adobe Print form development in my current project.
We have configured ADS and am able to create my Adobe form. I tried testing my form directly and it shows me my form in PRINT PREVIEW properly.
I tried creating the PRINT PROGRAM as shown below. For my suprise, I dont find the PRINT PREVIEW window itself. Niether the OUTPUT.Can anyone help me in correcting my mistake. I hope someone must have had this kind of similar problem before.
* Get the Generated function module name
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
 i_name = 'Z_TEST_APPLICATION_FORM'
IMPORTING
 e_funcname = l_funcname
 E_INTERFACE_TYPE =
IF sy-subrc <> 0.
WRITE : 'Exit at FP_FUNCTION_MODULE_NAME'.
EXIT.
ENDIF.
Set the form processing attributes
l_outputparams-device = 'PRINTER'. "Set the output Device to PRINTER
l_outputparams-getpdf = 'X'. "Launch Print Preview
l_outputparams-preview = 'X'.
l_outputparams-immexit = 'X'.
l_outputparams-NODIALOG = ' '.
*l_outputparams-dest = 'LOCA'.
Start the form processing
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
 ie_outputparams = l_outputparams
 EXCEPTIONS
 CANCEL = 1
 USAGE_ERROR = 2
 SYSTEM_ERROR = 3
 INTERNAL_ERROR = 4
 OTHERS = 5
IF sy-subrc <> 0.
WRITE : 'Exit at FP_JOB_OPEN'.
EXIT.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_docparams-LANGU = 'E'.
*l_docparams-fillable = 'X'.
Call our Deferment Application form
CALL FUNCTION l_funcname
EXPORTING
 /1bcdwb/docparams = l_docparams
 p9230 = p9230
 ndgp = l_ndgp
 ldate = l_ldate
 lsubty = l_lsubty
 stext = l_stext
 nric = l_nric
 ttext = l_ttext
 rankname = l_rankname
 ndgrant = l_ndgrant.
IF sy-subrc <> 0.
WRITE : 'Exit at l_funcname'.
EXIT.
endif.
Close the Form Processing.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
 E_RESULT =
EXCEPTIONS
 USAGE_ERROR = 1
 SYSTEM_ERROR = 2
 INTERNAL_ERROR = 3
 OTHERS = 4
IF sy-subrc <> 0.
WRITE : 'Exit at FP_JOB_CLOSE'.
EXIT.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE : 'Sucessful'.
Expecting a fast response. Thanks in advance.
Regards
Raja Sekhar

Hi Raj,
Its really nice to hear from you. getPDf is used for getting the pdf document to process in the code.
Say, i require to attach the PDF and send the form through mail. In that case, I flag this parameter and get the values in the result import parameter of the FM.
Hope this will give you some idea. You may refer Jeff Gebo's webinar or Vani krishnamoorthy's papers available in SDN, which illustrates, how you can attach a PDF and ssend the mail..
Hey, btw, i am posting a new thread regarding drop downs. Please reply to it [:D]
Regards,
Anto.

Adobe print engine failed to output your data due to an unknown problem using modified font

I have a document I created in InDesign CS5.5 with no issues. One of the fonts had a some issues with how the letters looked, so I modified the font (True Type) with a font editor. The documet on screen looks fine and passes preflight with no issues, but when I try to print it to any printer or PDF (Adobe PDF or Winpdf wirter) I get the error: adobe print engine failed to output your data due to an unknown problem. I also tried to create a document in MS Word with the same modified font and had no issues printing. Can anyone check into the issue with InDesign with this font if I send it to you? I also did try to create a new document in InDesign with just some text using the modified font and it will not print that one either.

***Oops. Cross posted. Glad it is working.***
If you desire to share the fonts I can look at them. Just send me a PM with a link.
Did you change the internal naming/IDs when you created your varient? If not, try removing the version you began with. Paths all closed, etc?
Ian's application works fine but I don't use the light version--isn't there some limitation with it?
Mike

The Adobe Print Engine has failed to output your data due to an unknown problem

I am currently having a huge problem printing from indesign. I am running CS3 on a hi spec 08 Mac Pro (10.5.2) connected to an Epson 3800 Stylus Pro A2 printer. I keep getting the message <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. I have tried trashing the indesign preferences, I tried a new account... In fact I have just done a clean install of the entire OS. Just can't get it to print. I did have it printing on this machine before and the same document prints from my iMac. The problem seems to be something to do with the print dialogue. If I print WITHOUT checking the Printer settings in the Print dialogue is sends to the print, but the output is shocking as the paper selection is not right and uses photo black not matt black. When I DO check the printer settings and set it all correctly it gives me the <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. Anyone else had this or have any thoughts?

I am seeing this error too, but I've narrowed it down to an isolated set of circumstances. My client has begun rolling out Active Directory integration with Macs on their network. Here are the specifics:
-- Mac OS X 10.5.4, IDCS3 5.0.3
-- Using the Directory Utility, Macs are bound to AD with using the mobile account option (user folder is cached locally on workstation, hosted on the network)
-- The message immediately pops up after clicking 'Print' button in print dialogue.
-- Printers are a couple of different versions of DocuColor (250 and 260) with Fiery RIP front ends. Print queues are hosted on an AD print server and listed as Open Directory under Kind in the Add Printer dialogue.
-- Only IDCS and ILCS3 (13.02) exhibit this problem. PSCS3 (10.01), Acrobat (8.1.2) and Safari do not have the same issue, so it appears to be Postscript related
-- Printers not going through AD (IP or BonJour enabled HP B&W lasers) print successfully when logged in via the networked user. Logging into a local admin account resolves the problem as well.
-- This issue appears on freshly imaged machines, G5s and MacBook Pros, not just an isolated workstation. So its possible there is a problem with the source image, but it was created by another office and I'm just a consultant onsite at another location trying to sort things out. Other workstations still using Thursby's Dave software for file and printer access, running 10.4.11 do not exhibit same issues.
-- The console output lists this error when ID fails:
7/23/08 3:28:59 PM /Applications/Adobe InDesign CS3/Adobe InDesign CS3.app/Contents/MacOS/Adobe InDesign CS3[1374] passwordCallback: didn't find keychain item for "ipp://localhost/printers/DC01_Fiery250_5th";prompting for it
I have created a keychain entry to match this with no success.
-- None the suggestions in linked KB doc. resolve the issue. But that doc seems to be outdated as it references CS 1 and 2 versions of ID.
So, has anyone seen the same issues? AD integration appears to be the common thread, but I cannot find the cause.
Shawn Punga
Senior Systems Consultant
MacLab

Problems Converting word documents with the Adobe Printer and method ,printout (OutputFileName:=) in

I would like to write a vb-procedure to convert a word document into pdf.
I'm developing in "Visual Basic 2005 express edition" and tried the following code:
code[
Private Sub PrintDocument(sDocName As String,sNewDocName As String)
'sDocname = "c:\tmp\test.doc"
'sNewDocName = "c:\test\test.pdf)
Dim m_wdApp As Word.Application = New Word.Application
Dim m_wdDatei As Word.Document
m_wdDatei = m_wdApp.Documents.Open(FileName:=sDocName)
m_wdDatei.PrintOut(Background:=False,OutputFileName:=sNewDocName, _ ActivePrinterMacGX:="Adobe PDF")
m_wdDatei.Close(False)
m_wdDatei = Nothing
m_wdApp.Quit()
m_wdApp = Nothing
End Sub
]End of code
After running the printout line I can see a little window popping up, which shows the progress in the converting and after a little time I can find the expected file in the targetdirectory.
The problem is that I can't open this file, I just get the message that the file is corrupt or not of the pdf-format.
By scanning the web, I found several threads describing the same problem, but so far I found no solution. Maybe someone here can help me.
Adobe standard 7.0.5.2005092300
COM: Microsoft Word 11.0 Object Library

You were right.
I've changed the default printer to "adobe printer" and created a new file. I thought the problem solved, but instead, the error is the same. The new file starts like this:
%!PS-Adobe-3.0
%%Title: Microsoft Word - P0017083.OPB
%%Creator: PScript5.dll Version 5.2
%%CreationDate: 3/31/2008 19:42:4
%%For: MMasshoff
%%BoundingBox: (atend)
%%Pages: (atend)
%%Orientation: Portrait
%%PageOrder: Special
%%DocumentNeededResources: (atend)
%%DocumentSuppliedResources: (atend)
%%DocumentData: Clean7Bit
%%TargetDevice: (Adobe PDF) (3016.102) 0
%%LanguageLevel: 3
%%EndComments
%%BeginDefaults
%%PageBoundingBox: 0 0 595 842
%%ViewingOrientation: 1 0 0 1
%%EndDefaults
%%BeginProlog

Adobe print form margin problem

Hello,
I am trying to print a Adobe print form on Kyocera printer(Using HPLJ4 device type).
I want to print content from 0.5 CMs, but if i give no margin in the design,Output is being Cropped.Print preview is okay.
Can any one help me?
Thanks,
Guru Prasad

Hello,
I think you can try with different device type like POSTSCPT or SAPWIN,
During the print it use different character widths when you use different device types to
output the same form, HPLJ4 is PCL-5 and the largest.
You can refer to notes 90437 and 183948 for more information.
Best Regards,
Wen Peng

Internal table in adobe print forms

hi there,
in my WDA-application i use adobe print forms for output.
i use a table for displaying an internal abap-table.
in the formular-hierarchy it looks like this:
table2
--> line1
--> cell1
--> cell2
--> cell3
my problem is that i am a complete newbie in scripting in print forms.
here is what i want to do:
if cell1 = 'X' then the text in cell2 has to be bold or underlined.
Can someone provide me with a code-example either in javascript or formclac???
thx
David

thx for answering.
first i tried the following code:
data.T1.Tabelle2::ready:form - (JavaScript, Client) -
this.Zeile1.Zelle2.font.weight = "bold";
this.Zeile1.Zelle2.font.underline = "1";
the result is, that cell2 is bold and underlined but only the first row of the table. i want all cell2 in all rows bold and underlined.
then i tried this:
data.T1.Tabelle2::ready:form - (JavaScript, Client) -
if(this.Zeile1.Zelle1.rawValue == "01"
this.Zeile1.Zelle2.font.weight = "bold";
this.Zeile1.Zelle2.font.underline = "1";
nothing happens and i dont understand why. The visible value in Zelle1 is "01"!

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Windows 8/8.1: Printer Offline Problems

Windows 8/8.1: Printer Offline Problems
Are you getting an error that your network or wireless printer is offline when you try to print?
When you print to your network printer, does it fail, and when you check the printer status it says Offline?
Do you have problems printing to your wireless printer after your PC has been asleep?
If you answered YES to any of the above questions, then you have a problem with your network printer being offline. After some investigation into this problem, we recommend updating windows. Run Windows update to check that your version of Windows 8 is up to date.
There are a few windows updates that may help with this problem
1) Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
2) Install this Microsoft patch for the WSD service. http://support.microsoft.com/kb/3000461
If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
Assign the printer a static IP address
An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
Get the printer IP address.
Press the Wireless button on the printer control panel to view the network settings.
Access the Network menu on the printer control panel.
Print a Network Configuration Page or Wireless Test Report page.
Once you have the printer's IP address, open a new web browser window or tab.
Type the IP address in your web browser's address bar, and then press Enter.
Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
note:
Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
In the EWS, click the Network tab.
In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
After the manual IP address populates, click Manual DNS Server.
note:
Keep a record of the manual IP address for reference.
On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
Method one: Use publicly available DNS server addresses
Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Method two: Get the network DNS information via your computer
Select your operating system, and then use the following directions to obtain the DNS server addresses.
Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
Scroll to and locate the DNS Server addresses.
In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Print a test page to make sure that the printer's IP address is the same as you assigned.
Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
Adding a Wireless Network Printer using Control Panel
Go to Control Panel and choose Devices and Printers
Click on Add Printer
The PC will search the local network and display the network printers.
Choose the printer and select Next
The system will then try and auto select a compatible driver
Select the current driver and Click Next
The system will then ask for a name for the printer. The user can change the name and then click Next
The User can then choose to share the printer
The user can select to make this new printer the default and then click Finish.
The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
Choose the Advanced Tab
Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
The user should try this configuration and see if they still experience problems.
Please Note:
DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
JonW
I work for HP

I have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
Your solution does not help me because I have tried to install Win8.1 and it failed.
I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
Is there another solution?
Or is there a way I can save the print queue?
Mike

Unable to print to Adobe printer in any program including Office 2010

My sustem is a Windows 7 64 bit. I have Office 2010 installed as well as Adobe Acrobat Pro X ver 10.1.3. I am unable to print to the Adobe PDF printer. If I select it in Notepad it is Greyed out. If I select it in an Office product like Word or Excel it shows that it is READY. However if I select it so I can print to PDF I get an error message "Word cannot print. There is no printer installed."
If I got to Devices and Printers Adobe PDF is listed. If I right click on it and select "Printing Preferences" I get an error message "Operation could not be completed."
If I select Printer Properties I get an error message "The "Adobe PDF Converter" printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
If I click YES a wizard pops up, the Add Printer Driver Wizard. I select Next, choose either any of the Adobe PDF Converter Versions or HAVE DISK, the NEXT. If I select have disk I go to the proper place "C:\Program Files (x86)\Adobe\Acrobat 10\Acrobat\Xtras\AdobePDF" and select the file AdobePDF.inf. I then select the top Adobe PDF Converter and select Next. It says You have successfully completed the Add Printer Driver Wizard. You are about to add "Adobe PDF Converter, x64, Type - User Mode. I click Finish and get another error.
This error says "Unable to install Adobe PDF Converter, Type - User Mode, x64 driver. Operation could not be completed (error 0x00000002)." I select OK and Adobe PDF Properties pops up. It has tabs like General, Sharing, Ports, Advanced, Color Management & Security. I can click on any of them and make any changes but once I click on OK and close the window and then Right Click on Adobe PDF there is no change to my results. I still get all of the above errors.
I have tried deleting the Adobe PDF printer and then selecting in Programs & Featues (Old ADD/REMOVE) the Adobe Acrobat X Pro item and right clicking on it and the selecting Change. It goes through almost a reinstall, it adds the Adobe Printer back but NO CHANGE. I still can't print to Adobe PDF.
Can someone help?

Can you try 'Print as Image' (Advanced button on Print panel).

Adobe Print Services in Java Instance on iSeries

Comment by moderator: An english overview of this thread is given in an answer to this posting.
Sehr geehrter Herr Hoelters,
wir möchten gerne GTS on System i fahren. Für fast alle Module aus GTS
braucht man die JAVA Instanz. Das soweit ist wohl kein Problem.
Für die Adobe Printing Services brauchen wir die Java Instanz auch.
Nun gibt es wie unten aus dem Buch zitiert non supported Platforms.
Im Hinweis Hinweis 925741 wird eine Lösung mit einem zusätzlichen
Applikationsserver empfohlen.
Dadurch stellt sich raus, das wir doch einen zusätzlichen Windows
Server für diese ADS benötigen.
In der PAM kann man folgende Informationen finden:
Freigaben Adobe Document Services Datenbank-Plattformen DB2/400...
freigeg.
Datenbankversion Betriebssystemversion Datum Status
DB2/400 V5R3 WINDOWS SERVER 2003/IA32 32BIT 05.12.2005 Freigegeben
DB2/400 V5R4 WINDOWS SERVER 2003/IA32 32BIT 14.02.2006 Freigegeben
Bedeutet das jetzt das ich die ADS nicht ohne Windows Server nutzen
kann ?
mit freundlichen Grüßen
Carsten Schulz
Erstens:
Book: Global Trade Services Using SAP® GTS 7.0
Page 13
Depending on our process, it can be necessary to set up the following
additional instances:
SAP NetWeaver Java Stack
All print forms in SAP GTS are available in Adobe print technology. If
you want to use printing functions the Adobe Document Server (ADS) is
required that is icluded in the delivery of SAP NetWeaver Java Stack.
Printing documents and forms can be necessary in the following areas:
- SAP Customs Management
- SAP Risk Management Preference Processing
- SAP Risk Management Letter of Credit
Zweitens:
Book: SAP NetWeaver 2004s SR1 Java: IBM eServer iSeries
2.4 Running Adobe Document Services on Non-Supported Platforms
Adobe document services (ADS) are currently not supported to run
natively on all platforms supported by
SAP systems based on SAP NetWeaver, in particular on 64-bit platforms.
Procedure
To use ADS in SAP landscapes on non-supported platforms, install an
additional standalone AS Java on a
platform supported by ADS.
For more information, see SAP Note 925741.
Drittens:
Hinweis 925741 - Adobe Doc. Services (ADS) auf nicht unterstützt.
Plattformen
Hinweis zu IBM iSeries
Zusätzlich zu der beschriebenen Lösung können Sie einen zusätzlichen
Microsoft-Windows-Applikationsserver für die ADS im Java-Stack
einsetzen, wenn Ihre Umgebung auf einem IBM-iSeries-Server installiert
ist.
Message was edited by:
Carsten Schulz
Message was edited by:
Carsten Schulz

Hello.
This question and its answer might be interesting for the non german speaking members of this community, too. So I made a short translation of the discussion. Not in every detail but it should be sufficient to get the idea. If you have any further questions don't hesitate to ask here. For future discussions I would like to encourage all of you to use english as the forum language. The members of this community are distributed all over the world and using english is the only way to get feedback from most of them.
Now to the question:
Mr Schulz is interested in using GTS on a system i. To use the Adobe Printing Services support in GTS it is necessary to set up a Adobe Document Server (ADS). At the moment ADS does not run natively on system i. The PAM states that ADS runs on DB2/400 using a windows server. SAP Note 925741 suggests to run an additional application server. The question is now if there is no way to run a ADS on a system i without a windows server.
The answer given by Mr Hölters can be outlined as follows:
In fact ADS is not supported under i5/OS. To allow usage of ADS without introducing a second database platform to your system landscape there is a solution given in SAP Note 925741. Instead of having a second NetWeaver installation on a different platform you can add an additional dialog instance to your application server running on system i. If this dialog instance is running under Windows you can install ADS there and don't have to use a second database platform.
With kind regards,
Jan Stallkamp

How to install Adobe printer's 'postscript driver' in mac os x

hello again,
as posted recently hv a problem with adobe printer's postscript driver (ppd),In Indesign cs4 It shows ppd is missing while making Print File(.ps),
pls suggest how to install ppd again, i tried to install ppd driver downloaded from adobe website, but it fails to install.
pls help.

I guess you didn't read the link I gave you inthe other thread...
Here's one of the comments that you would have found:
Short description to the workaround Solutions
1) Usual workaround for printing with Distiller under SL and InDesign CS4:
Copy the PPD called “ADPDF9.PPD” (download-link here in this topic) to Library/Printers/PPDs /Contents/Resources/en.lproj
Works for CS4. Problem: Does NOT work for CS5.
2) Workaround for InDesign CS5:
- Go to Applications/Adobe Indesign CS5/Presets
- Create a folder called “PPDs” (attention: foldername is case-sensitive!)
- Copy the PPD called “ADPDF9.PPD” (download-link here in this topic) into this folder.
- PostScript Printer will be useable within InDesign CS5
Hope that helped and clears up all questions so far.
Cheers, hi2hello

Adobe print form - Purchase order MEDRUCK_PO

Hi,
Today I tried to make use of the MEDRUCK_PO adobe print form.
This form is defined by SAP. They also updated the print program, which is SAPFM06P with entry ADOBE_ENTRY_NEU.
The first problem I encountered was that the print program didn't find the PDF function module name. In stead it was looking for the FM of the smartform. I did a modification to this part so now the logic looks first at the type (Smartform, PDF of SapScript). This works but now I get an update termination.
This error says that ULINE is not recognised.
Did someone already this? I thinks its impossible to have the ULINE statement in a PDF form?!
Thanks
Bert

Hi,
I have sorted my problem out. If you do not have transaction SAPLWMC you can use sm30 on view V_TNAPR.
Now I am getting error messages when SAP generates the FM for the form. It is complaining about currency fields that do not exist in the HEADER stucture of the interface. Specifically it is complaining about WRF_POTB_CURRENCY-OTB_CURR which is referred to as the currency key for a couple of other fields. The structure WRF_POTB_CURRENCY is included in the table EKKO and EKKO is included in the MMPUR_PRINT_EKKO which is used for the HEADER structure for the interface (both MEDRUCK and MEDRUCK_PDF). Any ideas how to fix this? I am probably going to have to create a new structure(s) to get this working.
Regards,
Dion

Display tree hierarchy in adobe print form scenario

Hi
Can someone suggest what is the best way to create a tree structure in adobe print scenario ? can we display icon also next to the text in the tree. For example I want to get folder and file icons also along with their names in hierarchial manner.
Regards
vishal

hi,
to populate the dropdown list you can do it...
1). manually or
2). by code
1). manually go to interactive form->edit
 go to Object tab->field tab ->
 you must see something like
 List Items :
 Text + x
 click on the green + sign...
 it promps you to type. type in the value press enter... and so on...
2) by Code...
 //set up contents of a drop down list dynamically...
 IWDAttributeInfo countryInfo = wdContext.nodeTravelData().getNodeInfo().
 getAttributeInfo().getAttribute("DestinationCountry");
 ISimpleTypeModifiable countryType =
 countryInfo.getModifiableSimpleType();
 IModifiableSimpleValueSet countryValueSet =
 countryType.getSVServices().getModifiableSimpleValueSet();
 countryValueSet.put("1","Germany");
 countryValueSet.put("2","UK");
This will work....
regards,
-amol gupta

Adobe Print tab Problem

Similar Messages

Maybe you are looking for