Adobe Pro 9 Scanning - Change Scan type after Prompt to scan more

I have an end user who is using Adobe 9 Professional to scan pages to PDF. The pages they are trying to scan contain mostly text documents but there are times when there are some photos that are mixed in. The problem they run into is when they scan the text as White/Black option, the photos come out really dark. They normally need to rescan them as a different option to be able to see the scanned image correctly. The end user believes that in Adobe 5, they used to have the option to scan more pages and choose the type of scanning option when they choose to scan more pages. They are looking for this option in Adobe 9. Currently they have to save multiple documents and then combine them to be the one document they are looking for.

** SOLVED FOR ME **
Acrobat 9.0 and 9.1 Standard
No v9 properties toolbar access except in last document opened
I don't know if this applies to you but I had a similar problem with documents on our network.
It turns out the documents were being saved as PDF/A or PDF/X format.
I had the users open up Adobe.  Go to Edit>Preferences      Then go to the Documents section and find the "Open in PDF/A" section.  I had them select "Never"  and then the toolbars were no longer greyed out.

Similar Messages

  • Change Mvt type after GI.

    Dear All,
    Can i change movement type after Goods Issue n if not........... what to do? bcoz i entered wrong Mvt type while creating GI.
    can delete GI?
    or Reversal entry.....
    Thanks
    M. Zafar Saeed

    Hi,
    Instead of Reversal the document, better you can cancel the material document.
    During reversal, you have to enter reversal movement type and remaining details manually.
    But to cancel the document, just you have to enter document no. Then system will take reversal movement type and other details automatically.
    Cancel the material document, which is created at the time of GI using transcation MBST.
    Transcation : MBST
    Enter material document no and enter.
    just save the document. System will cancel the material document.After then, you can do GI with the proper movement type.
    Regards
    KRK

  • Changing doc. type after creating a doc. type.

    Hi Friends,
    We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
    We made Z report for this time ageing report.
    Regards,
    Sai Krishna

    You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

  • Is there a way to do an install of Adobe Pro XI without entering key until after the install?

    Is it possible to set up an install of Adobe Pro XI that doesnt require the licence key to be entered at the time of the install, but instead upon the first time the application is run? We have various users with different license keys but want to automate one installation and just have them enter the key after the install has complete, when they go to use the software the first time. We are looking to set this up in SCCM 2012 R2. Thanks in advance for any insight!

    Direct Download Links for Adobe Software
    For proper deployment, sign up with the dev center/ enterprise deployment.
    Mylenium

  • How to change page type after the fact

    In the application builder, I click on an application and choose Details in View.
    I get the list of pages I have in my app.
    The page type column has:
    Interactive Report
    Navigation Form
    Dynamic HTML
    DML Form
    Chart
    Report
    How do I change this column after a page has long been created?
    Specifically, I want to the change "Dynamic HTML" to something else.
    Why?
    Because on this particular page, tabs do not work (error: page not found).
    Buttons created among a regions items do not work (same error, page not found).
    I need to use tab and buttons to go from this page to other pages.
    And I am suspecting the page type may have something to do with my problem.
    Thanks in advance for any pointers.

    Thanks for your consideration!
    For my current app, a clinical management system,
    I'd like to have, say, 1000 items.
    (For other applications I am thinking about, but have no time,
    nor expertise for now, I'd need millions of items,
    each corresponding to a pixel of a graphic.)
    Who cares if the current computers are too slow?
    How about make it a parameter that can be changed
    per app or per apex installation, and default to 100?
    Some forms can be broken up logically, as people have helpfully suggested,
    and I did follow that advise on some pages.
    But other forms cannot be. People have put a lot of thought on designing
    those forms, they are government or legal standards (or at least something more important
    than computer performance), and people have been trained
    with those original forms.
    Consider the hoops I have to jump through to get more than 100 items
    on a page I am currently working on:
    Generate the items (INPUT type="text" and INPUT type="checkbox") using PLSQL
    lots of htp.p('<INPUT ...>').
    a JavaScript function to collect all the values on the page
    and make up an XML string. submits this string to an application
    process, and application process parses the XML string and does insert or update.
    Another JavaScript to populate the items based on the current values of a row,
    using an application process to retrieve the columns of a row.
    There are about 150 items on this particular page.
    All these are ok, because I was aware of the restriction of 100.
    And because I wanted to generate my own HTML to mimic the original
    form anyway.
    Then things started to go weird.
    I need buttons to go back to another page. and I use tabs.
    Buttons to go back from this page,
    when a button is created with "Create a button in a region position",
    it works fine.
    When a button is created with "Create a button displayed among this region's items",
    it does not work, and I get HTTP 404, https://.../apex/wwv_flow.accept, page cannot be found.
    But I need a button to work like the one created with "Create a button in a region position",
    but displayed like the one created with "Create a button displayed among this region's items".
    This is still not too bad. I saw the difference between the two kinds of buttons.
    I copied the HTML code for the button "Create a button in a region position",
    and used a display only item to create a Back button where I wanted:
    '<table class="t15Button" cellspacing="0" cellpadding="0" border="0"><tr><td class="t15L"><img src="/i/themes/theme_15/button-l.gif"/></td>'||
    '<td class="t15C">Back</td>'||
    '<td class="t15R"><img src="/i/themes/theme_15/button-r.gif"/></td></tr></table>'
    Here P145_BACK holds the page number to which I want this page to go back to.
    Then I noticed that the tabs did not work any more. same error, page not found.
    That's is when I got a little frustrated and posted for help on the forum.
    Then I begin to undo my steps, and
    by lucky accident, I noticed that, if none of the checkboxes is checked,
    the tabs work fine. If at least one is checked, I get this error, page not found.
    My current solution is to add a function of my own in the doSubmit(B) function in file apex_3_1.js,
    which unchecks all checkboxes (o.checked=false).
    And now, from this page of about 150 items,
    the tabs are ok, and I have a button that is similar to one
    created with "Create a button displayed among this region's items", except I created myself
    using HTML.
    I think this trick of using a custom function in doSubmit(), that unchecks or even hides
    INPUT type="text" items (o_div.style.visibility = "hidden"; o_div.style.display = "none";)
    should work in general. this function is only invoked when the user clicks the tab,
    or buttons among a region's items.
    Somebody said regarding restrictions on drugs or sex.....
    you will not make people stop, you just make it harder or more expensive.
    Same here and many other things, a restriction is just making things harder.
    People will try to get around it.
    Now that I have a solution, and I am aware of the problem, I'll calm down and
    go back to my own thing for now.

  • Changing Document Type after making progress with project. Is it possible?

    Can I still change my document type after I already started my project? I want to change it to print type.

    Just what do you mean by "print type"?
    Do you mean changing the document Color Mode to CMYK color from RGB color?  If so, sure, you can do that at any time.
    If you mean changing the "file type" (file format)  (say from PSD to TIFF, etc.) you just do a Save As to create a new document in whatever format you want.

  • Can we change material type after creation of material

    hi all ,
       can any body tell me how we can change the material type of already created material , i have a material type (do not use raw material) which i want to chage in raw material
    please reply

    Hi Manjit
    Try transaction MMAM
    It may not work if you have some differences in field selection between the old material type and the new material type (e.g. batch mandatory in old material type and hidden in new material type)
    It may not allow processing if stock has already been posted
    Regards
    Steve

  • How to correct bad PDF display of Excel 2007 graph-Adobe Pro X?

    Just installed Adobe Acrobat Pro X; previously had Adobe Pro 8, which worked fine.  Have Excel 2007 files with an Excel graph and a JPG image on the spreadsheet tab.  Both the graph and the JPG are too big, are displaced, and hide spreadsheet data, when the Excel file is Saved As a PDF using Adobe Pro dialog or Excel dialog, or the Excel Plug-In to Create PDF.  For some strange reason, printing to PDF works, although that is limiting.  All of the settings are the same for the Adobe Printer as Adobe Pro settings.  Changing them or going to default did not help.  Just did the latest update; that did not help.
    The graph and JPG are too large for the PDF page.  Paper printing from Excel still works fine. Producing a PDF on another machine with Pro 8 still works fine.  Could not find this problem discussed anywhere.  Using XP, fully patched.  This should not be a complicated process, nor a complex spreadsheet. What is going on?
    Thanks

    Regardless of the method and Adobe product used to create the PDF, including the Excel tool button, the single common factor whether the PDF correctly displays a JPG or graph in the Excel file that is being done at anything other than 100% size is whether the Adobe Printer or a Physical Printer is selected as the default printer in the Windows Printers and Faxes-Settings.  This is true even though the printer is not being used. I have created the same PDF using every method/product and the results are always the same, and only properly display when either the setting is 100% size or the system printer is selected as Adobe Printer.  This is true only after installing Adobe X (8 was previously installed, and worked as expected).
    Jeffry Calhoun
    Workforce Analytics Manager
    Ohio Department of Job & Family Services
    P.O. Box 1618, Columbus, OH 43216-1618
    InterAgency: F376, 4020 E. 5th Avenue
    614-644-0564
    Fax 614-728-5938
    [email protected]
    OhioMeansJobs.com -
    The next best thing to having an HR department.
    OhioMeansJobs.com -
    Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
    >>> "Bill@VT" <[email protected]> 4/7/2012 7:21 AM >>>
    Re: How to correct bad PDF display of Excel 2007 graph-Adobe Pro X? created by Bill@VT ( http://forums.adobe.com/people/Bill%40VT ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4319297#4319297 )
    You say the settings for the printer work fine, but do not for PDF Maker (I am assuming this is what you meant). PDF Maker no longer uses the printer and the settings are independent. Check the settings for PDF Maker under the create PDF menu.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4319297#4319297
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4319297#4319297. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
    Ohio Means Jobs
    You're looking for something unique. Use more than an ordinary site.
    http://www.ohiomeansjobs.com
    This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

  • How to locate the window for entry of the redemption code to get serial number for Adobe Pro XI DVD to activate?

    How to locate the window on ADOBE's website for entry of the redemption code contained in the pack slip to obtain the product serial number for Adobe Pro XI DVD to be activated after purchasing from a local retail store?

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

    I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • Adobe 9 Pro: Comparing Scanned PDFs - either no changes found or many many (incorrect) changes found

    Hello - using Adobe Acrobat 9 Professional.
    I have two Word documents that were scanned into a Xerox copy machine, which converts said documents into PDF format and emails them.  
    I open both these PDF documents, save them to disk.
    I open Adobe Pro 9 and invoke the Document/Compare Documents feature, browse and find the two files, set document description to Reports. 
    Document OCR recognition is set to English/PDF Output Style: Clear Scan and Downsample: Lowest (600dpi).
    Below is a modified screenshot to hide private info - but what you can see in the red box is that the compare functionality didn't pick up the textual change (red box on left) which was simply an insertion of the words: testing testing here.   
    I am having great difficulty getting this the Compare Document feature to function properly.  When I choose Document Description >Scanned, there are times when it skews most of the text by converting ones to the letter 'i' and inserting tilde (~) symbols.    Can someone help?

    Your workflow really does not fit the "compare" profile.
    Compare works well when:
    Have a single authoring file. Make a PDF. Send out PDF for comment / review.
    Incorporate comments into the single, source authoring file. Output PDF.
    Compare PDFs.
    As soon as you go to a scanned image and rely on OCR your out of the box.
    First and foremost OCR will not provide a 100% reflection of the textual content.
    Other issues as well.
    Not likely to motivate a snoppy dance (would incur a subscription cost) but you'd be much better served use Adobe's EchoSign online service.
    Be well...

  • How do I get a pdf document already on adobe acrobat pro to scan and make it into a scanned document?

    How do I get a pdf document already on adobe acrobat pro to scan and make it into a scanned document?

    Acrobat Pro only. I have a document which I am try to convert into a scanned document. I am trying to find out if it can be done on Acrobat Pro

  • "Type your password to allow Adobe Acrobat Pro to make changes" appears whenever launching

    The message "Type your password to allow Adobe Acrobat Pro to make changes" now appears whenever I launch Adobe Acrobat Pro 9.4.2 on Mac OS 10.6.5. I am forced to enter my Mac password before every time I want to use Acrobat -- very frustrating. The problem did not used to happen. I think I recently installed an Acrobat update which might have caused this problem to happen. I am logged in as an admin user.
    Here's what I tried. None of these things resolved the problem for me.
    Repair disk permissions.
    Restart the Mac.
    Deleted the key called selfhealingfilename in SHinit.xml.
    How do I resolve this?

    Please try following steps:
    1. Repair your current Acrobat installation
    a. Launch Acrobat
    b. Go to Help->Repair Acrobat Installation
    c. Check all the components and press Continue
    Missing components will be repaired
    2. Now, update your Acrobat.
    Go to Help->Check for updates
    Update your Acrobat to latest version i.e. 942
    3. Again , Launch Acrobat. Acrobat would ask credentials for the first time.
    4. Quit Acrobat and launch Acorbat again. Acrobat should not ask for credentials now and for all subsequent launches . Please reply if you see a different behavior.

  • Why can't I scan more then 20 pages before Adobe XI Pro crashes?

    ever since i moved from Adobe 8 Standard to XI Pro, i can't scan as much as i could. At a given time with 8 i could scan hundreds of pages without issue and now I'm lucky if I am able to scan 20 in a row before it crashes and gives me an "Acrobat.exe - Application Error: The exception unknown software exception (0XC0000409) Occured in the application at location 0X2F946AB9"
    I am running a fully updated Windows XP Pro SP3 with 2gb of ram. with a 3Ghz intel core 2 duo processor, and a Fujitsu Fi-6230 Scanner
    i have already tried the following:
    restarting the machine
    restarting the scanner
    running repair on adobe
    uninstalling, rebooting, then re-installing the scanner drivers
    removing the page file and recreating one at least 2gb
    tried different scan settings
    updated adobe and the twain drivers
    scanning with WIA drivers works to a certain extent but a pain to use
    tested the scanner with scandall PRO(which also works but not with the same functionality adobe has)

    You are probably running against a limitation of either XP or RAM or both. Acrobat XI probably uses more RAM and more resources. You can try to remove and unneeded background processes and see if that helps. For example, just as a test, try to run your scanner while disabling your virus protection. Can you scan more pages?

  • Change detector failed while scanning for changes to type User

    I'm receiving lots of system log warnings in IdM.
    These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
    Almost one warning per one second.
    Change detector failed while scanning for changes to type Server
    Change detector failed while scanning for changes to type UserForm
    Change detector failed while scanning for changes to type User
    Change detector failed while scanning for changes to type Resource
    SysLog detail:
    Timestamp 123
    Event
    Server server11
    Severity Warning
    Component Repository
    Error Code OCDT00
    Message Change detector failed while scanning for changes to type User
    Reported cause java.lang.NullPointerException
    java.lang.NullPointerException
    at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
    at java.util.HashMap.eq(HashMap.java:299)
    at java.util.HashMap.containsKey(HashMap.java:381)
    at java.util.HashSet.contains(HashSet.java:182)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
    at java.util.TimerThread.mainLoop(Timer.java:512)
    at java.util.TimerThread.run(Timer.java:462)

    same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
    wonder if there are others who are seeing this.
    my "syslog -d 1" output looks like this...
    2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type User
    2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
    lh syslog -d 1

Maybe you are looking for