Adobe Professional - Calculation not being calculated

I created a form containing several fields where people
input numeric values. For the most part it is working however there is one box (the last box in red, where it doesn't calculate right away until they enter a number in another field. Why is that? Each time someone enters a number, that field should re-calculate right away after the user moves on to the next field.
I cannot figure this problem out, please help. I'm attaching a word document containing a screenshot of the problem. I'm also attaching the PDF form.
--Gilbert

Change the field calculation order.

Similar Messages

Adobe Professional Will Not Start

Good evening,
I had Adobe Professional 7.0 installed on my computer. A malware forced me to scrap the hard drive and replace it with a new one. After reinstalling Adobe Professional 7.0 Tryout (I have the activation code that I purchased after downloading the program about 3 years ago) I cannot start it. When I attempt to start it the mouse arrow turns into an hour glass for about 15 seconds and that's it. Nothing happens. I can't even enter my activation code because the program doesn't pop up on the screen.
I have Microsoft OneCare installed. The firewall permits acrobat.exe to access the Internet
I tried to download an update but I got a message saying the update could not be installed because the program wasn't found!
Any idea where the screwup is?
Thanks for your suggestions.
Job.

Job79 wrote:
This computer is on a network. I am the only user and I have full administrator's privileges. It's got to be something else...
Being the only user with admin rights is not, as far as I know, the same as being the Administrator
I think you must log in as Administrator
Also... updates do not work on the demo program, only on registered versions
Once you get the program to install, and you use your number to register, you will be able to update
Apply all updates IN NUMBER ORDER
Acrobat Update http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

Is there a solution to Adobe Bridge CS6 not being able to read raw files from the 5D Mk lll

I like to use Bridge as my overall file organizer. I operate on a Mac version OSX version 10.8.3 and cannot read my raw files in bridge cs6. Does anyone have a solution for this.
Also is Canon putting any pressure on Adobe to fix this?

Not bridge but camera raw. You'll need to update your camera RAW.
You can either do it directly in Photoshop, or you can download it here: http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html
At the bottom, there is a link to download Camera Raw 7.4 for Mac and WIndows. Adobe hides there link from their main site to force people to update via Photoshop update feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Adobe form data not being retrieved by Web Dynpro application

Hi,
I have created an online interactive Adobe form embedded in a Web Dynpro ABAP application. The Web Dynpro application calls a function module to update data in SAP. My problem is that the ABAP code that was generated to retrieve the data from the Adobe form and call the function module does not retrieve the data if it has been typed into any of the input fields. Oddly enough, it does work if the data is entered by using the value helps that have been placed on the form.
I would appreciate any suggestions.
Thanks!
Russell

Use messageboxes on various events to find out when your value dissapeears.
If you´re not sure about the binding, you can always drag/drop from data view tab onto the layout and check the binding which the system generates for you. Just to make sure.
Regards Otto

Custom Adobe print settings not being saved as a default

We're trying to print pdf labels from a website to either a Citizen CLP-521 or a Zebra GK420d using a custom label size and settings. This works fine when printing from the local PC the printer is connected to. However as soon as we share the printer and try and print from another PC we have to select all of the settings everytime which is time consuming. On the locally connected printer PC each time it is rebooted we have to select the label printer as it goes to the default printer. Subsequently we have to select the custom settings which are then saved until the PC is rebooted. However on the other PC's we are having to select the printer and the custom settings everytime. This is very time consuming when we're trying to print 150 labels each day!
We've tried with different versions of Adobe reader, 7, 8 and 9 loaded on Windows XP Pro SP3. Tried changing various settings in Acrobat but still no joy.
Has anyone else experienced this problem or got any ideas on how to resolve this issue?

Uninstalling iTunes and quicktime from your PC does not erase songs you have on your PC nor does it erase the iTUnes Library File. When you do uninstall it iTunes leaves all your songs alone and it leaves behind the iTUnes Library inside the "iTunes" folder. So when you reinstall iTUnes the library is already in place
More info about the library file can be found here
http://docs.info.apple.com/article.html?artnum=93732
Also reinstalling iTUnes will reinstall quicktime too. there both bundled together

Adobe Creative Cloud Not Loading Correctly Windows 7 Pro Sp1

When I open CC, the below screenshot is what I get:
System specs are as follows:
Processors: 8
Video Card: Nvidia Quadro 2000D
All Adobe products are trusted within Kaspersky. Kaspersky logs indicate that Adobe CC is not being blocked in any way. Adobe CC works on my other computers, one of which is virtually identicle to this one.
This is the third computer I've installed CC on, but I don't see how it can be a licensing issue, as I can't even sign in to Adobe CC on this one (I do realize one of the other two computers will need its permissions recinded for CC to be useable on this third one) and CC is therefore unable to determine if it has permission to run on this computer.
Does anyone have any ideas as to what the issue could be? I would really like to get it working on this machine.

I've still no luck getting this to run on my machine. I've unistalled, reinstalled, use the cleaner, updated my flash players, installed Air, deactivated my other two machines . . . nothing is working.
This has become incredibly frustrating. The results are the same as with the screenshot in the above post.

Adobe Acrobat is not installing with CS5 Suite

I have downloaded the CS5 Suite and Adobe Acrobat is not being included in that download for some reason. What is wrong and how can I correct this issue asap!
thank you

Hello,
I am having the same issue. I purchased CS5 a few years ago and have reinstalled it onto my new computer (Was done successfully). When I went to download CS5, the adobe acrobat pro 9.3 (I believe this is the version) was not included. For the life of me, I cannot find the ability to download it anywhere. I'd prefer to not to have to purchase it again since I already bought it (even though it's been a few years).
Any tips would be most appreciated!
Thanks,
natalie635

Mid month period not being calculated in pay slip

Hi Experts,
Mid month period given in 0008 is not being calculated.
e.g. if i hire some one on 16.01.09, then 0008 data should be calculated for those days only (e.g. 16 days) in pay slip. But in my case it is taking full amount of 0008.
Can any one kindly help, pl.
thanks
Balu

Dear Sikindar,
thanks for the replay.
PCL 1 and PCL10 are having 3 and 1 respectively.
checked the control record and the pay roll area of that employee and generation of pay roll periods are available in V_T549Q.
please guide me further
thanks
Balu

Employer Unemployment Tax Not Being calculated in US Payroll

Hi Experts,
Employer Unemployment Tax (Tax Type 10) for Tax Authority Alabama is not being calculated in US Payroll in my SAP system.
The taxable amt is showing up, but the tax is not being calculated in the payroll log.
No error/warning mssg is provided by BSI in the payroll log.
I have already checked for the following:
1)We are using the standard tax model 002 provided by SAP for Alabama
The tax model settings are fine.
2) Table T5UTX is being maintained.
3) Tax Type 10 is setup against tax auth Alabama in BSI Tax Factory.
For tax auth Federal too, though the taxable for tax type 10 shows up, tax is not being calculated.
Can you please help.
Regards,
Somdeb.

Hello Somdeb,
Please be aware that this is no standard SAP tax model only an example which must be customized as every customer is different.
First check the payroll log to see if the information is being sent to BSI TaxFactory. If not then the issue is mostly the tax model. Different tax models can be used based on the employee.
If the values are being sent to BSI and not being calculated, then there is an issue wil BSI. Send BSI the script and they will tell you what the issue is.
Regards,
Manny

Control chart limit calculation not being done

Hi
I have maintained MIC, sampling procedure and Insp plan for a char and have made two lots with them. Though charts are being displayed correctly, control limit calculation is not being possible. Msg is "Control limits for track 1 could not be calculated".
What customization should be made for this?
And in QGC1/2/3, only one insp lot is there, what went wrong?

Dear Gajesh,
I tried with status 3. When i remove lot created start date, it shows me the fist lot with which we statred SPC in SAP. But If i put any specified start date, it returns no value. Does that mean with status 3 it will show the very 1st lot with which SPC usage started? Then what are the cases for status 1 and 5?
My sampling procedure setting is:
sampling type: Fixed sample
Valuation mode: SPC inspection
W/O inspection point
Sample size: 1
Chart type:115 Shewhart chart for X bar/USA
Inspection plan setting is:
SPC criterion : 020 task list char/materia
Base qty : 1KG
Thanks!

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

Adobe AIR could not be installed because another application is already being installed

OS Windows XP
If I try to start a new setup I receive the following message:
"Adobe AIR could not be installed because another application is already being installed. Complete the first installation before proceeding with this one."
This is the messagge when I try to remove Adobe Air 1.0 from Control panel:
"Another installation is already in progress. Complete that installation before proceeding with this install."
This is the log file:
[2011-04-08:19:59:21] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-08:19:59:21] Commandline is:
[2011-04-08:19:59:21] No installed runtime detected
[2011-04-08:19:59:23] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-08:19:59:24] Installing msi at d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-08:19:59:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:27] Rolling back install of d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi
[2011-04-08:19:59:27] Rollback complete
[2011-04-08:19:59:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:28] Runtime Installer end with exit code 7
In the past I had problems with a virus and I removed some voices on regedit. I think I've combined some mistake.

Hi,
I'm sorry you're having problems installing/uninstalling air. Have you tried rebooting to see if that resolves the issue?
If it still fails, can you enable MSI logging using the instructions found on the following page and then post the msi log contents for review?
How to enable Windows Installer logging
Thanks,
Chris

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

I was able to download and install Photoshop CC 2014 on my Mac Laptop. I am not being offered the new version on my iMac desktop. Why? I am a member of Adobe Creative Cloud.

I was able to download and install Photoshop CC 2014 on my Mac Laptop. I am not being offered the new version on my iMac desktop. Why? I am a member of Adobe Creative Cloud.

Please refer:
http://helpx.adobe.com/photoshop/system-requirements.html
Regards,
Ashutosh

Adobe Professional - Calculation not being calculated

Similar Messages

Maybe you are looking for