Adobe Programs: Conflicts and Networking help please

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Similar Messages

Adobe Programs: Conflicts and Networking help!!

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Routes, gateways, and networks -- Help Please

Hi Linux gurus:
I have a problem that I know you will help me resolve...
I have two network cards in my Linux box.
1. public network:
10/100
192.168.1.102
default gw: 192.168.1.1
netmask: 255.255.255.0
I want this one routed to my router for internet/public use
2. private network 1000mpbs
192.168.2.181
default gw: none
netmask: 255.255.255.0
I don't want this one routed at all. It is used for backups, moving files, etc and is called by individual servers using /etc/hosts.
Now problem is that I can't get out and/or in to the box. It appears as though the default gateway on this system is 192.168.2.254. I set up the network via the gui and it appeared to be working, but alas it is not. It looks like things are only talking via the 192.168.2.X network, and that is not what I want...and from the outside world, nothing at all is talking to it.
Below is my ifconfig -a and my netstat -rn
Please help!
eth0 Link encap:Ethernet HWaddr 00:18:F3:E8:29:2A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:193 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:90:27:AC:7C:4D
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
TX packets:1891 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:588251 (574.4 KiB) TX bytes:530473 (518.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0F:B5:43:16:D0
inet addr:192.168.2.181 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:300106 errors:0 dropped:0 overruns:0 frame:0
TX packets:617831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28009736 (26.7 MiB) TX bytes:585354764 (558.2 MiB)
Interrupt:217 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:816528 errors:0 dropped:0 overruns:0 frame:0
TX packets:816528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102034952 (97.3 MiB) TX bytes:102034952 (97.3 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth2

Ok...I did the following:
route add default gw 192.168.1.1 eth1
route delete default gw 192.168.2.254 eth2
I am able to get out to the outside world and it seems to work fine, but just curious:
1. How do I keep this from reverting again? (I could put this in my own script, but would rather not hack it, but do it right)
2. Are my routing tables below correct now (it works I understand, but want to ensure it is done correctly).
3. What is this route for (in the below table) and is it needed?
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
4. Since i'm relying on /etc/hosts files for the systems on the 192.168.2.X interface should there even be a route for this subnet?
updated routing table:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I have cs4 product, and want buy only adobe pro, illustrator and photoshop, help me please

for me what i have to do.
i have cs4, but only need adobe pro, illustrator and photoshop.
help me
for best choice
thanks
paulo pedro

As far as acquiring news versions goes, the only benefit you will get from owning CS4 is that you can get a Creative Cloud subscription at a special rate for the first year. https://creative.adobe.com/#plans
Otherwise, since CS4 is not in the upgrade path for CS6 products, you can purchase CS6 applications at full price.
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Recently have been unable to sync. - message comes up saying conflict on device- Help please.

recently have been unable to sync. - message comes up saying conflict on device- Help please.

You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

I am unable to download Adobe Acrobat Reader - can you help, please?

Error returned: 404
I am unable to download Adobe Acrobat Reader - can you help, please?

Try downloading the installer from http://get.adobe.com/reader/enterprise/
If you need more help, please provide your operating system details.
[topic moved to Adobe Reader forum]

Adobe DNG converter has frozen, help please x

Can anyone help, my Adobe DNG converter has frozen and wont work, I have uninstalled it and updated to the latest one, now I cant find the updated one on my computer as it wont show up under search, and the other one has frozen and wont work..... Help please as I now cant edit any photos!!!!!

I'm having A very Similar program with DNG Converter 8.4 and 8.6! The Program was working fine until 2 weeks ago, now when I open the software, it doesn't load completely and when I click the application window up, all of the information fields are clear, showing the desktop through the window. Anyone else no what to do about this? I'm running Windows 8.1

Can't import .mov files into adobe premiere pro cs6. Help please!

Help please. When i try to import .mov files i get a message saying, "The importer reported a generic error." This video was taken from a nikon D7000 camera. If you have any questions i can answer them very quickly!

Hi WatsYourPowerLvl,
Thanks for posting on Adobe forums.
Do you have QuickTime Player installed on the machine ?
if not please install from :
for MAC : http://support.apple.com/kb/dl923
for Win : https://www.apple.com/in/quicktime/download/
if yes please tell us following information :
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Are you using security software e.g. Norton, etc
and
if windows, Please check if you have windows defender turned on ?
Regards,
Sandeep

After effects and photoshop ,,,help please

hi all
can anybody help please.
ive been making a short film with my son and putting some basic effects in, just for a laugh.
i noticed an effect on ADOBE TV that was done by Gareth Edwards in his movie MONSTERS which i thought would be good to try out in my film but i carnt get it right,,
here is the link to that effect... http://tv.adobe.com/watch/customer-stories-video-film-and-audio/monsters/
its the effect where he changes the menu board in a cafe to one of his infected area signs, he allso changes a few other signs.
in the video he say that he exports a still frame from after effects into photoshop and puts on his image {with a few tweaks her and there}, when hes got it ok in photoshop ,it some how updates in after effects??
can any please help ,thank you

It's a simplified explanation of the process. He left out explanations of motion tracking and perspective matching that were most certainly required for the shot being discussed.
If you are doing the same process to a static, locked off shot, with no foreground objects passing in front of your sign, it would be very possible to create a single frame in Photoshop and just layer it over your scene in AE. But once the camera moves, you will need to understand Motion Tracking. If objects pass in front of the replaced component, you will need to understand Masking.

Adobe Programs Not Working-Need Help

All my Adobe programs are unresponsive in my Mac Book Pro. Every time I open a program, after it loads up it virtually freezes. Every click I do, even if its not meant to do anything brings up the rainbow wheel, meaning a big operation is being done, or its having trouble doing the operation. This makes it so nothing can be done, not even selecting a tool, or opening a new/existing file. I know the programs are not responding because in the Force Quit window it says the programs are unresponsive. At first I tried to see if Force Quitting would help, which it didn't. I would restart my computer and that wouldn't work either. I even tried uninstalling, and re-installing the programs, and still nothing. I tried going to Disk Utility to repair the disks, and permissions, and again that didn't fix anything. At the time that I tried all that I was on the trial version of the programs, very near or at the trial period being over. So I thought upgrading to a Student License would help fix this, which it also didn't. After upgrading I uninstalled and re-installed again, still nothing. I only use three programs: Photoshop, Illustrator, and Premier Pro. They all have the same problem.

reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

Mail and password: Help please!!!

I have changed my password and on my iPhone and iPad there is no problem. However, on my iMac, 10.8.2 every time I put the computer to sleep and then wake it up again Mail tells me to verify my password. I press OK but it refuses to accept and I am forced to go to System Preferences, then mail where I press OK for the same password and the whole thing then works.
In Yahoo it works perfectly!
What is happening in Mail. I have deleted the account in preferences and set it up again but all to no avail.
Help please!!!

You might try the following steps:
Restart the device by holding down the on/off button until the power down slider appears.
Try entering your password in another location (i.e. when you are using a different wifi network)
Reset all settings (settings > general > reset), this resets some of your settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It does not remove any of your data.
Try signing out of iCloud and back in (only if find my phone is disabled)
If this doesn’t help your best option may be to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

JSP and Servlet - help please

Hello,
I am making this feedback for fun and a bit of learning too. I have an INDEX.JSP page, where the user selects the very first option. Depending upon the selected option he is moved another page PRODUCTFEEDBACK.JSP (so far I have completed this). Here as usual there are many fields to be filled in. As a spams protection i have done this;
I have a AdditionClass, which is a seperate class where two number are generated at random. This numbers are called by PRODUCTFEEDBACK.JSP. The user is then asked to perform the addition. The completed form is then sent to ProductFeedback servlet.
When I compile my PRODUCTFEEDBACK.JSP I get this error. Can you please tell whats wrong?
PRODUCTFEEDBACK.JSP
      *<td>Please help us to prevent Spams by performing this simple mathematical Calculation. We appreciate your effort </td>*
    *</tr>*
*</table>*
*<jsp:useBean id = "AddTest" class = "go.AdditionClass" />*
*<table width="53%" border="0" align="center">*
    *<tr>*
      *<td><div align="center">*
*<input name="textfield8" type="text" size="3" value ="<jsp:getProperty name="AddTest" property = "randNum1" />">*
* + *
*<input name="textfield9" type="text" size="3" value="<jsp:getProperty name="AddTest" property = "randNum2" />">*
* = *
*<input name="_total" type="text" size="5">*
      </div></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
</table>
<br>
<table width="37%" height="23" border="0" align="center">
    <tr>
      <td width="33%"> </td>
      <td width="67%"><input type="submit" name="Submit" value="Click here to send us this form"></td>
AdditionalClass.java
* To change this template, choose Tools | Templates
* and open the template in the editor.
package go;
import java.util.Random;
* @author MAC
public class AdditionClass {
    Random generator = new Random();
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void SetNum1(){
        randNum1 = generator.nextInt(10); // Generate First Random Number
    public int getNum1(){
        return randNum1; //Return First Random Number
    public void SetNum2(){
        randNum2 = generator.nextInt(10); // Generate Second Random Number
    public int getNum2(){
        return randNum2; // Return Second Random Number
    // send the Random Numbers to ProductFeedback class
    public void productFeedbackRandNum1(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(randNum1);
    public void productFeedbackRandomNum2(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(randNum1);
}Erros that I am getting:
org.apache.jasper.JasperException: Cannot find any information on property 'randNum1' in a bean of type 'go.AdditionClass'
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:462: The following error occurred while executing this line:
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:440: Java returned: 1
BUILD FAILED (total time: 1 second)

Thank you for replying. I modified my Bean class then what is posted above, so thought to repost the code again and seek help. There seems to be no error now but it just dont generate any random numbers, All i get very time is 0. I am wondering, is my code generating 0 as random number, every time :-)
package go;
import java.util.Random;
public class AdditionBean {
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void generateRandomNum1(){
        Random generator = new Random();
        int num1 = generator.nextInt(10);
        SetRandNum1(num1);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(num1);
    } // End of generaeRandomNum1
    public void generateRandomNum2(){
        Random generator = new Random();
        generator = new Random();
        int num2 = generator.nextInt(10);
        SetRandNum2(num2);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(num2);
    } // End of generateRandomNum2
    public void SetRandNum1(int num1){
        randNum1 = num1;
    public int getRandNum1(){
        return randNum1; //Return First Random Number
    public void SetRandNum2(int num2){
        randNum2 = num2;
    public int getRandNum2(){
        return randNum2; // Return Second Random Number
}// End of classThank you,

My iPod touch has no sound from music and videos help please

My iPod touch has no sound at all, help please guys.

- The restore from backup
- If still problem restore to factory defaults/new iPod.
- Last, make an appointment at the Genius Bar of an Apple store.

Adobe Programs: Conflicts and Networking help please

Similar Messages

Maybe you are looking for