Adobe Project Rome Template Exchange

Hallo ich kann mich nicht beim Template exchange bei adobe project exchange anmelden mit meiner Adobe ID, kennt einer den fehler

Schon klar.
Aber ich habe das Programm vor 4 Wochen installiert und konnte mich beim template exchange einloggen. Seit 2 Wochen nun nicht mehr. Kommt der fehler, nach 2 Wochen dauerloggin getrennt.

Similar Messages

ADOBE PROJECT ROME for scientific use?

Dear developer,
Dear ADOBE,
the official website of ADOBE PROJECT ROME released the following status:
November 30, 2010
[...] The trial of Project ROME for Education has concluded. However, the commercial version of Project ROME will remain free to the public via Adobe Labs. No additional Project ROME software updates are planned at this time.
source: http://rome.adobe.com/index.html (October 23, 2011)
May I use the software ADOBE PROJECT ROME for scientific use? I am planning to create mathematical assistance content just like material which is used in real repetitional lessons. I would like to publish the material, which was created by the software via my homepage.
I am looking forward to hear from you!
Best regards
SpWheel

im not adobe, nor am i a developer which works for adobe...
But it seems to me that the quote u made is also the answer to your question..
The commercial version will remain free..
commercial usually means u can use it either way, privately or commercially.
Besides, why shouldnt u make use of it?
This program is great, and i really do not understand why Adobe stopped support for it.

Creating Animations with Project ROME

Have you seen the animation clips (Create New > Animations > Anim Clips)? If so, this is just the tip of the iceberg of what you can create yourself!
You can animate just about anything you create or bring into Project ROME! So, we want to know if you've created an animation yet and have anything you could share. If not, can we inspire you with a challenge?
With Thanksgiving right around the corner, we thought it would be really fun to create animated Thanksgiving e-card invites. Begin brainstorming ideas for your animation and start using the tools to see your animation come to life!
Don't hesitate to post your wonderful creations to the Exchange. Tell us about your process, what you loved and if you ran into any problems. Good luck and have fun!

I created an animation/presentation project for students "Shapes_Project1" and posted to the ROME template exchange and to edexchange.adobe.com. It is designed to show students the function of the transform panel and how simple shapes can be changed and animated. It also gives the students an opportunity to create pages to demonstrate their understanding. Let me know what you think.

BUG: Advanced Actions duplicated when creating NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.

Need: CREATE NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.
Problem: NEW PROJECT (.cptx) duplicates the Advanced Actions originally configured within TEMPLATE FILE (.cpt.).
For example: Template file (.cptl) advanced action "_initializeModule" gets duplicated as "_initializeModule1", "_initializeModule2", "_initializeModule3" within NEW PROJECT. FYI, the original "_initializeModule" advanced action still appears.
MAJOR BUG, what the heck is going on?!?!!! Planning to deploy this template file to use for multiple courses with multiple users, this WILL cause epic confusion across the board.

Similar problem, think they are working on it as well: when dragging a shared action from an external library to a slide or object event, and that action is using a parameter that was already created for another shared action, there will be a new parameter created which really screws up the shared action contrary to this problem. Tip: for the moment do not drag shared actions from an external library immediately to an event, but drag them first to the Library: Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

Did you know- you can create consistently branded collateral with Project ROME?

Hi Romans,
Whether you have a small business or you want to market yourself while job hunting, Project ROME is a great tool to create branded collateral quickly and easily! Simply check out the Creative & Interactive Packages in Project ROME and start cracking. Get Started: Open ROME (http://bit.ly/ProjectROME) > Create New > Home & Business > CI Packages
Host your project on the Exchange and share your experiences with us here by posting to this thread! Let’s shape the future of Project ROME.
Are you a florist, a yogi, a caterer, a lawyer or a hair stylist? We’ve got a template for that! Here’s an example of the many templates to give you an idea:
Thanks,
Sarah
Sarah
Forum Moderator

Project ROME is a great tool to create branded collateral quickly and easily!
Actually it is not... As long as we cannot import vector artwork from AI or other apps, this is useless. I would even go so far as to say unless this has a way of correctly dealing with CMYK and process colors it probably never will. It's a case of "It all looks pretty on screen but my print shop wants CMYK" or "it looks awful wehn printed" (due to lack of proper CM). And no offense to the kids, "branding" is not popping on your company logo on everything. Branding means producing a consistent, recognizable visual style based on a set of predefined elements and styles, which ROME does not allow us currently. We cannot store colors, object styles, font styles, use our own custom fonts and whatnot. Additionally, to be usable for establishing a branding regime inside an organisation, we would have to have a way of restricting use of specific things and lock down design elements, something which ROME doesn't do, either. so for what it's worrth, it allows some level of producing similar designs, but none of which I would call usable branding...
Mylenium

How to modify Apple's "Project Proposal" template in Pages 5.0?

In Pages 5.0 I want to use Apple's "Project Proposal" template for my project proposals, but I need to modify Apple's original template.
Removing the image works in the "Modern Report" template - but does not work in the "Project Proposal" template.
What is the difference in how the image is places in the "Modern Report" template vs the "Project Proposal" template?
In Apple's original version on the first page, there is a large image, followed by:
Project Proposal
Prepared for: Trenz Pruca, Title
Prepared by: Urna Semper, Job Title
2013年10月26日
Proposal number: 123-4567
I need to remove the image, and start my text from the top of the first page. I could manage to remove Apple's original image easily, but the space previously occupied by the image remains as empty space. I tried for a couple of hours to eliminate this empty space (previously occopied by the image) and move the "Project Proposal etc" text to the top, but could not find a way to do that.
Where can I find and modify the offset of the text from the top of the page, or eliminate the empty space previously occupied by the image.
There seem to be some controls hidden somewhere in the Pages software, or of the template itself, which I could not find yet, where this text offset from the top is controlled.
Any help greatly appreciated.
Gerhard

I encounter the same problem today when trying to use this template, and after reading previous replies, I went and copy all the elements (Select All) into a new blank document (don't have an older Pages version) and it worked just fine for me, no overlaping or anything, as you can see on the image below, the layout doesn't start after the image, I just had to tweak it a little, like moving the company name and upper line to the top (and move them to section master) and manually adding the bottom line.
I'm new here, so if any of you can tell me if and how can I upload my Project Proposal template I just created to this discussion, I'll be happy to share it with all of you.

How to Create a Custom Project Site Template Using Visual Studio

I know how to make changes and save a site as a template but I need to be able to create a new project site template during deployment to different environments. Trying to have this not be a manual process.

Hello,
This article might help:
http://blogs.msdn.com/b/sambetts/archive/2013/10/17/creating-a-clean-visual-studio-solution-from-a-sharepoint-2013-site-template.aspx
Start with a default Project Site (create a new site from the Project site template) and save out the WSP then import into VS.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Create your own graphics using Project ROME!

Hi Romans,
Ever want to add your own logo or graphic to your creations? Maybe you want to design a brand logo for your business or a festive turkey for your Thanksgiving cards and invitations.
Learn more about creating vector graphics using Project ROME. Here are two tutorials on vector graphics: http://bit.ly/95QpFl and http://bit.ly/cKYfG8. And, one interesting thing to note, you can even create your own custom shapes using the paint brush tool.
Let us know if you've enjoyed creating vector graphics in Project ROME, and if you had any trouble. We'd like to shape Project ROME with you in mind for the future!
Thanks,
Sarah
Sarah
Forum Moderator

Romans,
Thanks for the praise! Did you have a chance to create your own graphic after watching this video? Please do and let us know your thoughts on this feature. Was it easy after the tutorial? Were there any problems you incountered?
Thanks again,
Sarah
Sarah
Forum Moderator

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

Custom Interactive adobe form as template in PMS

Hi Experts,
In PMS i want to use custom interactive adobe form as template instead of standard.My issue is after creating Int.Adobe form how we can call custom form instead of standard form?
Any BADI's i have to use?
How we can map the fields?
Please help me.
Regards,
Arun.

Hi Arun
Step 1: Go Tcode: OOHAP_BASIC
            Enchancement Area - AP     Print Layout
            Define your Enhancement
            Example:
            ZPRINT     XXX print form
            PMP                          PMP PDF
            SMARTFORM     Print Appraisal Documents: Old (with Smart Forms)
            STANDARD     Standard
Step 2: Go Tcode: PHAP_CATALOG
            On your Template under Layout Tab
            Further - Print Layout -> Plug in your Custom Print Form
You should be all set.
Thanks
RAjdeep

Create a project from list item not working if EPT has Project Plan Template

HI,
i am trying to leverage the new feature in 2013 to create a project from an idea list.
This works fine if the EPT does not have Project Plan template assigned to it. Even through workflow action "Create Project from current list item".
However if i assign a project plan template and the user creating the project  is not Administrators Group member, i get an error. While doing this trough a workflow the worfklow gets suspended and i have the below message:
RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 403
{"error":{"code":"20010, Microsoft.ProjectServer.PJClientCallableException","message":{"lang":"en-US","value":"PJClientCallableException: GeneralSecurityAccessDenied\u000d\u000aGeneralSecurityAccessDenied"}}}
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["290"],"SPRequestGuid":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"request-id":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 23 Apr 2014 14:40:46 GMT"],"Server":["Microsoft-IIS\/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)   at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Any one has experienced this ?
Thx

Hi, RonyZ.
I think it could help.
I have experienced the same problem as you are, except "Create project" option, my managers could do it.
So, for me a solution was to set definite permissions for Workflow Initiators (I have created new group, but you can edit, including
Global permissions
New project
Open project template
Server configuration management
For category “My organization”
Open Project
Publish Project
Save Project on Project Server
Excuse me my translation, some names can be written not properly, cause I have localized SP.
In you case, I think, you should check, if you PM group has all these permissions.
And Workflow Initiator should be in group which has.
In LOGS error notifications starts with “Permission denied”, then goes account
name and then the name of permission which is left.

Correct Steps to Edit an Existing Project Plan Template?

Hi,
We have to add tasks to a current existing Project plan template which is also a part of EPT. What are the correct steps for carrying out this exercise. Please help.
Thanks in advance.

Hello,
It depends what you want to achieve. Do you want to overwrite the existing plan template or version it. Lets cover both.
Overwriting
Open the Enterprise Template in Project Professional - assume it is called "Dev Template", make the required changes. Click File > Save As, type the exactly the same name of the current template - "Dev Template", change the type to "Template" and
click save. You will be prompted about overwriting the template, Click OK. Now all future projects created from the associated EPT will have the new update plan template.
Versioning
Assuming the current template is versioned - "Dev Template v1", Open the Enterprise Template in Project Professional. Make the required changes. Click File > Save As, type the exactly the same name of the current template but update to v2 -
"Dev Template v2", change the type to "Template" and click save. Now go to PWA Setting / Server Settings > Enterprise Project Types, click the correct EPT, scroll down to the project plan template section and update the template from "Dev Template
v1" to "Dev Template v2". Click Save. Now all future projects created from the associated EPT will have the new update plan template.
Hope that helps
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

BAPI/FM to Create Projects from Templates

Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project?
If not, what could be the work around?
Regards
Sreenivas

Hi Robin !
        I have the same issue here, to create projects from a template, using a Function Module to do that, and I tryed to use the FM CJWB_PROJECT_COPY as you suggested, and I achieved to create project from template but, for any reason not known by me, the project is created without status object, so I can´t open it on any transaction(CJ02/CJ03/CJ20n...). I have tested it in SE37, using test sequences, so I call it and BAPI_TRANSACTION_COMMIT to save the data.
        To make the projects available to work, I needed to run a report named CNSTATUS as explained on SAP Note 170948.
        Do you know why using CJWB_PROJECT_COPY created the projects without status object assignment ? I could not find any documentation about this function, so maybe the problem can be caused by some wrong parameter that I was passed to it.
        Do you already used it ? If yes, can you send a sample code ?
        Thank you in advance, and best regards !
        Wilson

SSRS Report Viewer Web Part - Saving it as a Project Site Template

Hi all,
I ended up creating a custom filter web part that was passing the PUID to SSRS report viewer web part in a project site.
Works perfectly fine until you save the site as a project site template. I attached the site template to an EPT and creating a new project. The project site created fine, but the connections between the custom filter web part and SSRS Report viewer web part
is broken!
Paul gave me this web part to start with, but this doesn't work in SharePoint Integrate Mode:
http://gallery.technet.microsoft.com/projectserver/Report-Viewer-webpart-439e0062
And SharePoint Integrated Mode is what we are pushing our clients towards.
Any help will be highly appreciated.
SJ

Looks like I forgot to respond to this...apologies for the delay.
For the client that I asked this question, I ended up writing it programmatically and it works.
But I would prefer using products now...rather than Band-Aid approach - I guess my role is shifting.
Luckily I was introduced to a SharePoint and Project Server developer here in London and he has been developing products for SharePoint and Project Server since version 2007! I spoke about my dilemma and he already had a product for this for SP
integrated mode! I have now started to add this product to all my the PS2010, PS2013 implementations. Great thing is it doesn't cost much at all and he provides support for it as part of subscription. I guess I twisted his arm a little bit - not physically!
So far I have used the product at two sites and applied CUs over it - no issues at all. This is a proper packaged product and can't recommend it high enough. Yes, you will have to let the client know about this third party tool, but we manage the relationship
on behalf of the client - just like when we buy Nintex, IPMO or Fluentpro products.
If anyone is struggling with SSRS web part in Project Sites and doesn't have the time to write codes as they have multiple PS implementations on the go then you can contact
[email protected]
I must say his marketing isn't that great, but since he is a freelancer he only works and sells his products to people within his network, I think he maybe changing that soon! Hopefully :-)

"Start this workflow to approve publishing a major version of an item" in Project Site templates

Hi
I created a document library with the "Start this workflow to approve publishing a major version of an item" on, and saved the site as a template. However when I create instances using that project site template, the document library doesn't
have the "Start this workflow to approve publishing a major version of an item" option on, like the site that was used for the template have.
Is this option not possible to save on a project site template?
Here are the steps I did:
On a document library I set the versioning for major and minor version
I create an “Publishing approval” workflow and set it to “Start this workflow to approve publishing on a major version”.
But when I create a project instance of this type, the document library on the project site has the “Start this workflow to approve publishing on a major version” turned off.
Thanks!
Best regards

Hi,
I recommend to create a WebProvisioned event receiver.
We need to create an event handler and register it with the Web Provisioned event. In the event, we need to find the specific Library and set SPList.DefaultContentApprovalWorkflowId property.
When the site is provisioned, the event handler is activated. Then the "Start this workflow to approve publishing a major version of an item" option will be checked.
More information:
SPWebEventReceiver.WebProvisioned method (Microsoft.SharePoint)
SPList.DefaultContentApprovalWorkflowId property (Microsoft.SharePoint)
Attaching Web Event to perform operations after creating the web (Event Receiver Concept)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Adobe Project Rome Template Exchange

Similar Messages

Maybe you are looking for