Adobe Reader 9.0 runtime error
Each time I "open" a PDF file, the document opens, I see it, and then I immediately get:
"Runtime Error!"
"Program: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe"
"This application has requested the Runtime to terminate it in an unusual way. Please Contact the application's support team for more information."
I close the dialog box and the program quits.
This is a new Dell computer running Vista and Microsoft Office 2003.
Bob
Yes, many User have this Problem.
To Solve this Problem i have installed Acrobat Reader 8.1.2
One other way is to use an Administratoraccount (but then working on the Computer is not secure)
Similar Messages
-
Adobe Acrobat 9 Pro runtime Error!
I have an issues with Adobe Acrobat 9 Pro runtime Error!
Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error.....etc
on window xp 32bit with Service Pack3!
Could anyone please help.Was it running in the past? Also, Reader and Acrobat are different products and you mentioned them as though you think they are the same. If you can open the package, select Help>Repair. Follow up with Help>Updates.
-
When will Reader 9's Runtime error for redirected Application Data be fixed??
Has anyone heard when Adobe will fix Reader 9's Runtime error for redirected Application Data?? It's still happening with 9.1.3 for only users who have their Application Data folder redirected via Group Policy.
It's been going on for some time, as evidenced by the following link, and my own personal pain fighting this
http://forums.adobe.com/thread/391738?start=100&tstart=0Also posted here: http://forums.adobe.com/thread/391738
I haven't read through all of the posts, but the general consensus I have is that the issue is in fact related to the redir
ection of the Application Data folder. The main issue being that the use of a UNC path causes the error described, with some mention to explicit user permissions on the root of the folder path.
I was just recently made aware of this issue in our environment. Apparently we've held off upgrading to Adobe 9.x because of this issue. After a little research, it was apparent that simply modifying the default Folder Redirection policies is not possible because the use of a mapped drive is not supported.
I haven't had a chance to test this yet, and may not be able to for some time, so I thought I would share this in case someone else might be able to test. The idea being to simply use a custom ADM file to force the redirection of certain profile folders. Again, I haven't tested this using a mapped drive in the path, but I have successfully used the same settings below to redirect other folders not available by default in Group Policy.
1) Copy the text between ----- Start of ADM ------ and ----- End of ADM ------ and paste it into a text file.
2) Rename the .txt to .adm.
3) Load the ADM template into a GPO.
4) Right click "USER Custom Settings", select "View", select "Filtering" and uncheck the option "Only show policy settings that can be fully managed".
5) Configure the "Redirect Application Data" option as enabled, and enter a mapped drive path.
6) Test.
I'm interested to hear if this is a viable solution or not.
------ Start of ADM -----
CLASS USER
CATEGORY "USER Custom Settings"
CATEGORY "Folder Redirection Settings"
POLICY "Redirect My Documents"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
PART "Redirect to" EDITTEXT
VALUENAME "Personal"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Application Data"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "AppData"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Cookies"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Cookies"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectCookies
POLICY "Redirect Favorites"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Favorites"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectFavorites
POLICY "Redirect History"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "History"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Recent Documents"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Recent"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectRecent
END CATEGORY
END CATEGORY
------ END of ADM ----- -
To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
Adobe reader has stopped working error message after installing reader XI on windows 7
Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader -
Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to installSeriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying. -
adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again. -
Not able to download adobe reader on windows7 getting error 1606
I'm not able to download adobe reader on windows7 geting error 1606
Message was edited by: Host to remove email addressPlease see the Microsoft site for this error and the solution:
http://support.microsoft.com/kb/315352 -
Adobe Reader will not open, error O:104
Adobe Reader will not open, error O:104
That looks like a perfectly good PDF, but since it's trying to open in Microsoft Word, that means your file association for .pdf files is incorrect. You should change it to point to Adobe Reader instead of Word.
If you are on Windows, see http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7 -
Adobe Reader 8.1.2 - Error 1304.Error writing file
I keep getting an error as follows wvery time i try and download Adobe Reader 8.1.2:
Error 1304.Error writing file
C:\ProgramData\Adobe\Acrobat\8.0\Replicate\Security\directories.acrodata. Verify that you have access to that directory.
I run Vista 64 and have plenty of memory and space.
Canu help?
Michaelthese two errors below is what I am receiving when do a program integrity scan: common program locations.
I have done a repair on acrobat reader and I do have the two dll files I even put them in reader folder and still receiving the errors.
missing file:"c:\program file\adobe\reader 8.0\reader\acrord32.exe"
"c:\program files\adobe\reader 8.0\reader\acrord32.exe"cannot access a necessary file,"msvcp80.dll
missing file:"c:\program file\adobe\reader 8.0\reader\acrord32.exe"
"c:\program files\adobe\reader 8.0\reader\acrord32.exe"cannot access a necessary file,"msvcr80.dll -
Deployment Adobe Reader 11.0.10 - Error 259 and Error 150210
Im using the "AdbeRdr11010_de_DE.exe" from ftp server to deploy.
I want to update from 11.0.08 to 11.0.10.
Switches used for deployment: /sAll /rs
I am getting the error: 259
if i try to install again on the same machine
i get the error: 150210The log looks fine…
Adobe SFX 10.0.0.1 logging started.
CommandParam CmdLine:
5004nas\Software\AdobeReader\11.0.10\AdbeRdr11010_de_DE.exe /sAll /rs
CommandParam passToSetup_ : /sAll /rs
CommandParam bSilent_
TempFolder: C:\Windows\TEMP\
Support folder: C:\Windows\TEMP\27822
Extracting: C:\Windows\TEMP\27822\config.bin
Found RDC resource and valid configuration information - setting RDC mode
CheckSystemRequirements os,sp = 61 10 osString = 61W6, physicalMemory (3968) = 4096
Adding extracted installer size to the total size: 133
Adding extracted RDC size to the total size: 44
CheckDiskSpace...
Required size in MB: 249
Available disk space in MB: 225814
IsAlreadyInstalled...
SetupInstaller...
Extracting: C:\Windows\TEMP\27822\installer.bin
Extracting: C:\Windows\TEMP\27822\RDC.bin
Installer folder: C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1031-7B44-AB0000000001}\RDC
Extracting files from Archive: C:\Windows\TEMP\27822\installer.bin
Extracting files from Archive: C:\Windows\TEMP\27822\RDC.bin
StartInstaller...
CreateProcess cmdLine: "C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1031-7B44-AB0000000001}\RDC\setup.exe" /sAll /rs /msi DISABLE_CACHE=1
And Adobe Reader is updated…!! but error in Deployment Software is still Error:259
Looks like it is a false positive error ☺
Von: Sabian Zildjian
Gesendet: Mittwoch, 7. Januar 2015 19:20
An: Jakel Jürgen
Betreff: Deployment Adobe Reader 11.0.10 - Error 259 and Error 150210
Deployment Adobe Reader 11.0.10 - Error 259 and Error 150210
created by Sabian Zildjian<https://forums.adobe.com/people/Sabian+Zildjian> in Enterprise Deployment (Acrobat and Reader) - View the full discussion<https://forums.adobe.com/message/7074444#7074444> -
When I try to update Adobe Reader I get an error.
Hi,
When I try to update Adobe Reader I get an error.
Windows cannot find 'C:\Windows\Program Files\\Common Files\Adobe\ARM\1.0|AdobeARM.exe'. Make sure you types the name correctly, and then try again.
_ I've try to re-install Adobe Reader => same issue
_ I've deleted the AdobeARM.exe and did a repair => same issue.
Thanks -
When I tried to update Adobe reader, I got an error message
When the update for Adobe Reader started automatically, the error it gave me at the end was something like " Failed to write to C:/..." something. Please tell me what to do.
I am sorry for posting the incorrect link; it should have been http://get.adobe.com/reader/enterprise/
To clarify my instructions
download the cleaner tool from http://labs.adobe.com/downloads/acrobatcleaner.html and save it to disk (e.g. your Download folder)
unzip the file
download the offline installer from http://get.adobe.com/reader/enterprise/ and save it to disk
right-click on the extracted cleaner tool AdbeArCleaner_v2.exe and select Run as Administrator
right-click on the downloaded installer and select Run as Administrator
Don't hesitate to ask if there are still things unclear. -
Adobe reader met with unexpected error
Hi all,
I've been bombed with this problem for so long, I'd greatly appreciate it if anyone can give any suggestion. The problem is: My adobe reader 7.0.8 or 8.0 are constantly met with unexpected errors. It just doesn't work, I can't open any files with it. Did anyone have similar problems before? Is there any hidden files I have to delete before installing a newer version or something else?
thanks!!Here are more details:
I had adobe reader 6.0, the only version that was working on my mac, in my application library. I tried to upgrade it to version 8.0. I downloaded and installed adobe reader 8.0 alright, no problems there. But after installation was complete, the Reader restarted itself and crashed, showing me the message "The adobe reader met with unexpected error." and could not even function, not to mention opening any files. It happened with 7.0.8 before as well. I had no other way but to change it back to 6.0. But it's really bugging me because compared to the latest versions, 6.0 isn't really that good. So please help! thanks
I'm using powerpc G4 ibook tiger 10.4.8 -
Adobe Media Encoder CS4 runtime error
I am wondering why I am getting a runtime error while
attempting to use Adobe Media Encoder CS4...As soon as I launch
Adobe Media Encoder CS4, it crashes I have installed and
reinstalled Flash a couple time, to see if this corrects the
problem, which it doesn't, and just last week it was working
fine...Does anybody have a ideal what is going on?Don't know if this helps anyone else, bt the runtime errors i have been getting occur when I try to build and burn a blu-ray file. And they happen intermittently. In fact, on this project, I had burned several test blu-rays without difficulty. When I made one minor change on the penultimate version, and tried to burn again, the system crashed with a run time error. Then it crashed 9 more times over the course of the week.
Finally in frustration, I created an interim ISO file in Encore- ie in the build workstream, i selected burn an image file rather than burning a blu-ray disk. After this intermediate step completed, i then did a separate burn in encore but burned from the image file. No snags.
Not sure why but this program has trouble doing a sequence of activities. As it is, I already render and save the file before burning. Now I have another interim step to create an image file before burning.
In my next hardware change, I am going to switch to make Mac and Apple software. Enough of MS Windows and Adobe, the GM and Chrysler of the software industry. Hopefully what my friends tell me is true; that Apple stuff actually works.
Maybe you are looking for
-
Cant access to BIOS aftre HDD/SSD password!
Hello, Today I set a HDD/SSD password to my Tecra A-11 (updated BIOS) and I am verry happy with that pas,but I cant enter to the BIOS after I enter my HDD/SSD passwor - I press F2,but the screen just go dark for a second or two and the system acts li
-
An error occurred while trying to connect to a Web service
In infopath 2013 getting current user through web service getting this error in the browser "An error occurred while trying to connect to a Web service"
-
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
-
Since about 2 or 3 days ago, I've been noticing that my curves adjustment selection disappears from the 'adjustment layer' pop up menu. I have no idea what is causing this and the only way to get it back is to completely exit PS and restart but it al
-
Help!