Adobe Reader 9.1 prints only #10 envelope size

Every time I print a Adobe document the only size it lets me print is #10 envelope. I have looked everywhere but I can't find an option to change the paper size. I have looked in all of the obvious places, but cant find the page set up option. I have a mac operating system 10.5.6 printing to a canon pixima pro 9500. Need someone with fresh eye to direct me in the right direction.
Thank you.

Have you tried changing the settings in File>Page setup?

Similar Messages

Adobe Reader 9 pdf printing turns text into symbols

I am trying to print a pdf file, when it starts printing all of the text turns into random symbols, I am trying to print a rebate and this is really frustrating. I saved the online pdf to my HardDrive, then I try to print it after opening with Adobe Reader 9. I have tried printing it as an image, and still the same occurs, my printer is fine, it prints word documents and notepad perfectly, I have all the latest updates, so I do not know why this is happening.

I do realize that not all printers are affected. However, the problem is clearly with Adobe Reader 9. The reason I say this is that the problem does NOT exist with Adobe Reader 8. The problem ONLY occurs with Adobe Reader 9. Furthermore, I am not sure what specific resolution to this printer you are referring to, but there hasn't been a solution presented thus far that is an actual fix for the problem. Originally, I identified that if I selected "Print to Image" the entire multi-page PDF would print as expected. Although, this solution causes the multi-page PDF to print very slowly (for the reasons noted by Mike). Another reader reported that if you install FoxIT PDF Reader, multi-page PDFs print just fine. I have verified that installing FoxIT Reader DOES INDEED allow me to print multi-page PDFs to our FS-C5015N. Again, if it was purely a driver issue, why would a multi-page PDF opened with FoxIT Reader print as expected while the same PDF opened with Adobe Reader 9, not print as expected? There also were a couple other posts about using the generic Kyocera KX driver. This is not an option for us. Finally, there was a post about changing the Post Script driver setings. We do not use the Post Script driver. And just as a side note, we have tried using the Post Script driver to see if this will resolve the multi-page PDF issue, and it does not. With that said, I implore Adobe to once again acknowledge this problem and provide users with a fix. This is a very frustrating problem.

Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?

Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

Adobe Reader 10 & 11 Printer Issues

Printing double sided and with staples doesn't work with adobe reader.
I print 2 copies double sided with staples, without collationIt prints 2 copies, but staples pages 1 together, 2 together, 3 together. It won't stable pages 1,2,3 together as one document
I print 2 copies double sided with staples with collationIt prints 2 copies in the right order, but it only uses 1 staple to staple all of the documents together.
I can print double sided with staples on word and it comes out correct. So this issue is isolated with only Adobe Reader.
One fix I see people doing, is reverting back to adobe reader 9. But adobe no longer has adobe reader 9 available for download.
Did anyone find a fix to this? I see a lot of unanswered forum questions about this. I even called adobe about this issue, but they refused to answer the question.

Hi Jonthegiant,
Issue mentioned in steps 2 is know issue.
I would suggest you may send the other scenarios using this link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards,
Ajlan Huda.

Adobe Reader 9 and printing labels with USPS.

I have read some of the other posts about Adobe Reader 9 and printing labels with USPS. I am running Snow Leopard on my IMac with Adobe reader 9.1.3 and have had no problems only when using Mozilla Firefox 3.5.3 for the Mac. There is, however, an extra step, if I recall (some window asking me to make a selection, which came up after I clicked on the "print and bill" button). But everything worked just fine.

Hi,
Thank you for the quick response. I've done that but the problem persists.
A bit about my computer it's Vista, but the folders are a little weird. Default install directory and common files folders are on a different drive. In addition appdata are also on a different drive. However this should not affect sinve I've already re-installed Adobe Reader multiple times and it used to work just fine.
But perhaps the problem is indeed path related. Anybody with more ideas to share?
Thank you in advance.
Update: When I reinstall Adobe Reader and open the file, the first time I try to install Japanese font it does not end with "registering product" but with something like "removing backup files" (see attachment). If I try to install Japanese font again and again, I will get the "registering product" at the final glimpse of the installation pop-up.

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

How can I get adobe reader document to print text?

How can I get an adobe reader document to print the text not just the formatting?

Hi sarahjacobs777,
Please elaborate your issue so that i can assist you better.
Regards,
Rahul

How do I add adobe reader to my printer so I can print a pdf?

How do I add adobe reader to my printer so I can print a pdf?

Are you trying to print to a PDF from Adobe Reader?
If so, you need Acrobat for that. Reader doesn't not install a PDF printer.

Installed Adobe Reader X Cannot print. All Fixes futile!

Have OS Windows XP Installed Adobe Reader X and cannot print. Documents open properly and can be manipulated according to their limitations except I cannot print. Printer is HP Officejet 4500 Wireless. Have converted back to hard connection for this process. Connection not an issue. Everything else except the pdfs will print normally. Printing a pdf elicits no response from the printer. Does not show in queue. Hard attached another older HP printer. It does respond by pulling blank paper thru machine. Have full warranty on HP printer and have been thru detailed process with them. Does not appear to be a printer issue. Any suggestions greatly appreciated!

Tried all the same fixes. Still does not work. Connected to old printer.
Printer responded, but did not print.
In a message dated 9/22/2011 2:01:48 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Installed Adobe Reader X Cannot print. All Fixes futile!
created by kidolph (http://forums.adobe.com/people/kidolph) in Adobe
Reader - View the full discussion
(http://forums.adobe.com/message/3932194#3932194)

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.

When i do the download of adobe reader 11 there is only a black window and it don't start

when i do the download of adobe reader 11 there is only a black window and it don't start
excuse for my bad english but i'm italian

Please don't post the same question multiple times!

Is there any way in Adobe Reader to limit printing to only one page at a time?

We have a large piece of internal knowhow in the form of a pdf document that we don't want users to be able to print in one go as it would risk the document leaving the premises. We are quite happy with users using print screen for single pages, but that doesn't really produce readable results.
So ideally we'd like users to be able to select print, but when they do it should only allow 'print current page' or just print the first chosen page instead of the whole selection. For instance, selecting pages 123 - 145 should only print page 123.
I've looked in to various areas already. We are delivering this document through a secured version of Adobe Reader via Citric application streaming, so are able to customise the config.js file any way we want, however I've looked through the Java Reference Guide and haven't been able to identify anything that might satisfy our requirement this.
I've also looked in to Document Actions such as "Document will print", but again (perhaps due to a personal lack of programming knowledge) am unable to find a way to fix the print option to a single page.
Any ideas/suggestions much appreciated.
Kind regards,
Kaan

The sponsor is not happy for low res printing either. As an organisation we should be looking at DRM more closely, and we've added to the requirement with this problem. We are also going to look in to the option of attaching metadata and scanning that at our exit points (e-mail, printers, usb's, etc.) so that users have free reign internally but can't send sensitive documents out. Obviously it's all going to be very expensive!
Cheers for the respones guys.

Adobe Reader 8.0 printing

I've tried to print a PDF, double sided, using Adobe Reader 8.0 from my MacBook Pro but each time the final page is printed backwards (ie, I need a mirror to read the last page). The same PDF prints fine from Preview on my MBP and from a Adobe Reader 8.0 on a G4. Is this just a flaw of Adobe Reader 8.0 for Intel Macs?

Hello,
we have a large environment with Adobe Reader 8.1 users. I ran in to the described problem above. I did a few tests:
PDF file 3,43 MB printed with Adobe Reader 7.0.8 spool file 4,36MB
PDF file 3,43 MB printed with Adobe Reader 8.1 spool file 77,3MB
PDF file 3,43 MB printed with Foxit Reader 2.1 spoolfile 4,16MB
A lot of forums around the www, posting the same issues. No solutions so far. I contacted Adobe Netherlands Tech Support. Because it's a free product, tech support only helps with installing issues......
I can't understand that a big player as Adobe let this happen without a quick solution by their tech team.
Regards Raimond

Adobe reader xi default printer is not current printer

I am using windows 7 64bit and adobe reader xi. The default printer listed on the pull down menu of reader is an old printer (Xerox 2015) and cannot be changed. The default printer on the system (Xerox 2205) is different to that listed in reader. I have unchecked enhanced security, unloaded the drivers for the printer and reloaded from Xerox website. I have unloaded and reloaded reader several times. I can print from word or another program but I am unable to print any PDF document as I am unable to change the default printer. The xerox 2205 is not listed under reader at all but is set as default printer under windows. Any ideas?

Sorry
should be “displaying”
Like when open a drawing pdf which is inserted into Excel(office 365) as an object, some lines, dimensions with remark can not be displayed and only few graph can be displayed.
But if the drawing is a separate PDF file, not inserted into Excel(office 365)as an object, the Adobe XI reader can always open it with all graphs, figures, texts, lines etc. smoothly.
发自 Windows 邮件
发件人: Claudio González
发送时间: 2014年10月13日, 星期一 17:38
收件人: Alex Ye
adobe pdf can not be completedly displaced by Adobe reader XI while it is inserted into a Excel2013(office 365) file
created by Claudio González in Adobe Reader - View the full discussion
Please explain in full detal what you are trying to do and what happens when you try. I don't understand what you mean by "displacing a pdf (file?)".
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6819113#6819113
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Adobe Reader won't print in web browser when both Reader & Pro installed

Several of our machines have Acrobat Pro 10.1.4 installed and they also had Reader 10.1.4 installed but when Reader got upgraded to version 11 now PDFs opened in web browsers will not print. Seeing as it is fairly common for computers to have both Pro and Reader installed I do not understand why Adobe cannot account for their own products and conflicts. I was hoping to avoid having to uninstall Reader 11 from the machines affected so I would appreciate if there is anything I can have the users do to remedy this?

Gemini146...
I've ran into many, many, many circumstances like these and if the uninstall from add/remove does not work, what I would recommend is for you to delete the directory c:\program files\adobe and c:\program files\common files\adobe
Then try the installation of what ever version you want. The install should proceed.
If not (which had always been rare for me) then the next step I would advise (since windows installer clean utility didn't work)... is to go into the registry
(regedit) and click on Edit, find
type in: adobe reader
or adobe
and search the entire registry and delete each entry that it finds associated with Adobe Reader only
Of course, you need to know how to differentiate between what's for Adobe Reader and what's for Adobe Acrobat (granted that you do have Acrobat installed)
Is there risk involved with this method? Yes... but if you know your computer and know your way around the registry, you should be fine.
Also, make a backup of your registry as well as create a Restore Point before doing all this. Just to be on the safe side.
Then proceed with re-installing Adobe Reader and you should be ok.

Adobe Reader 9.1 prints only #10 envelope size

Similar Messages

Maybe you are looking for