Adobe Reader 9.x does not retain preferences when called by a 3rd party application.

I have an in-house application that utilizes .pdf and .xfdf files. We use Adobe 9.x when viewing these files and when I open them natively from Windows explorer they Display In Browser and all my Trust Manager preferences are intact. If I use the 3rd party application to open the files they Display In Browser but none of my TrustManager settings are present and I am forced to trust the document each time I reopen Adobe. If I leave Adobe Reader open for the duration of the session that I am using my 3rd party application though the Trust Settings for the document I loaded are present but as soon as I close Adobe they are gone until I Trust the document when opening it again. Any insight as to why this might be and how I could rectify the issue would be appreciated.

We are using 9.1.1.
We notice that this option is no loger available in this version. The below option will keep the form data available even if you exist out from the sessions.
Keep Forms Data Temporarily Available On Disk
Retains forms data in the Internet browser if you briefly go to
another web page and then click Back to return to the PDF form.

Similar Messages

Reflow in Adobe Reader for Android does not work

The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

I just downloaded and installed Adobe Reader X. It does not print. It is unbelievable to me!

I just downloaded and installed Adobe Reader X. It does not send the view to the installed printers.
It is unbelievable to me that Adobe would broadcast a flawed product like this.
ljc

BRIAN; THANK THE LORD FOR GOOD PEOPLE LIKE YOU THAT HELP OTHERS. ADOBE PHOTOSHOP TECH SUPPORT IS THE WORST TECH SUPPORT I HAVE EVER SEEN. I CALLED THEM AND 2 TIMES I TALKED TO INDIA OR WHEREVER, AND COULD NOT UNDERSTAND THEM. THE THIRD CALL I WAS TALKING TO A GUY AND WAS DISCONNECTED. I TRIED TO CONTACT TECH SUPPORT ON THE NET AND THAT WAS NOTHING BUT A PROBLEM AND COULD NOT GET MY MESSAGE THROUGH. I CALLED ANOTHER # AND THEY WANTED TO CHARGE ME. THAT'S BAD. I JUST PURCHASED THE ELEMENTS 13 AND THERE IS 0 TECH SUPPORT. THANKS AGAIN BRIAN. """DINO"""

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
Which one do you have?

Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0

I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp

Anyone going to tell me how to do this uninstalling and installing??????????
I don't want to mess things up even more! Geez--I'm almost 60 years old,
need to work and this might be costing me a job. I'm not 20 and text and
e-mail etc every day. I'm just asking for a little help that as I see it ,
is due to a "glitch" with Adobe's software. They can easily in their
technological minds put a warning on anything before someone downloads
anything such as "If you download this and you have already downloaded
that,, then it won't work." How tough would that be??? They, like most other
major corporations, are in it for the money. What has happened to customer
service???
I need a step by step with my hand held and so it won't screw up things even
MORE. Adobe...get your customer service and your software together...This is
draining. I may lose a job over it. I need to have my computer running well
at this point in time as there is no extra time to spend dealing with
software issue that are a result of Adobe's software incompatibility.
I was on the phone for TWO hours last night telling people exactly what was
going on. I even read the error message word for word. No one would help me
unless I coughed up the money that I don't have...and in addition I will
lose a job that might get me some money. This is why I am so upset. Why is
dealing with Adobe always so difficult??? Of course, I am upset. I'm
actually a lovely person. It is just that this stuff rattles my nerves.
Especially when there is a jobwith a raiseinvolved that I may lose as a
result.
Now I had better get dressed and ready for the job I have now before I am
late for work and lose that job, too.....

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

Adobe Reader add-on does not appear in IE9

After updating Adobe reader 11, I can no longer open pdf in Explorer (works in Chrome). When I go to Manage Add-Ons, Reader does not appear on the list, therefore I can't enable or disable.
Any suggestions on how to get it to appear and work in IE9? This was never an issue prior to the "upgrade"

Try going into Settings > iCloud and toggling the Contacts button off and on and see if you can then add contacts in the Contacts app

Adobe Reader for Blackberry Does Not Support Fillable Forms

I've discovered that the version released for Android does support fillable forms, but the version for Blackberry does not. I assume Blackberry did not develop the app so what gives?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

I downloaded the update for adobe reader now it does not work

i downloaded the update for adobe reader now not any of it works I hate it

I downloaded adobe reader update now nothing works I hate it

Switched printers & Adobe Reader X suddenly does not print at all.

I have had nothing but problems since downloading Adober Reader X, I have Windows 7 Pro and the program crashes, and now it simply won't print. I uninstalled and reinstalled Reader 9.3. I use my pdf docs every day and cannot afford any down time. Keep trying.....I saw no real improvements in the program to want to switch from the 9.3 for now. When its perfected I might consider reinstalling.

I have had nothing but problems since downloading Adober Reader X, I have Windows 7 Pro and the program crashes, and now it simply won't print. I uninstalled and reinstalled Reader 9.3. I use my pdf docs every day and cannot afford any down time. Keep trying.....I saw no real improvements in the program to want to switch from the 9.3 for now. When its perfected I might consider reinstalling.

Report does not come up when called from Forms

I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
It created an error file, I am posting the begining of this file here.
Please help.
Thanking you in advance.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
Library=C:\orahome1\bin\rw90.dll
Current Java thread:
     at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
     at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
     at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
     at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
     at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
     at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
     at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
     at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)

Hi ,
Looks like this is not a Forms side problem or even a Reports Servlet problem
Some guesses.
From the exception
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
Give
rwserver server=<server_name> in command line.
The server GUI should come up and show "ready "
You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
Copy the IDS specific PATH to clipboard
Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
rwserver server=<server_name>
and try
(If this works you could write a batch file later)
2) For trouble shooting purposes use a different server name to start the standalone server.
3) Also look in your registry
HKLM\Software\Oracle\Home<x>\
Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
This is just a guess.
4) To confirm this is not a Reports servlet problem
give
rwclient report=<report_name> + ..... <server=server_name>
If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

Stored Procedure Does Not Run Properly When Called From Portlet

We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

Any Ideas?

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

Error, package does not exist, thrown when calling jsp page

Hi
I have downloaded sample jsp pages for interaction with Crystal reports. When I compile these jsp pages in NetBeans 3.6 there are no problems. When I deploy these pages and associated libraries to Tomcat 5, I get the following error when attempting to call the jsp page, but all the jars used in NetBeans are present in the web-inf/lib directory and I have looked in the jars and found classes in the com.crystaldecisions.report.web.viewer package. I have been unable to find any information after googling and looking at the jakarta bug database. What am I doing wrong?
The error...
2004-09-22 17:40:30 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
[javac] Compiling 1 source file
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:9: package com.crystaldecisions.report.web.viewer does not exist
import com.crystaldecisions.report.web.viewer.*;
^
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
Note: E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
3 errors
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:127)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:415)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:458)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:552)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:284)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:204)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:245)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:199)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:195)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:149)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:156)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:805)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:696)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
     at java.lang.Thread.run(Thread.java:534)
The offending page is ....
<%
/*==========================================================================
INSTANTIATE THE VIEWER AND DISPLAY THE REPORT THROUGH THE INTERACTIVE VIEWER
============================================================================
    - Create a Viewer object
    - Set the source for the viewer to the client documents report source
    - Process the http request to view the report
    - Dispose of the viewer object
// Create an Interactive Viewer
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
// Set the name for the interactive viewer
viewer.setName("Crystal_Report_Interactive_Viewer");
// Set the source for the interacive viewer to the client documents report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
%>included in...
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<html>
<head>
<title>Begin Here - Simple Preview Report</title>
</head>
<body>
<%
/*=================================================================
WORKING WITH THE REPORT APPLICATION SERVER AND JSP TO VIEW REPORTS
===================================================================
Authors Name: Ken Andony
Technology supported by the app: Report Application Server
ALWAYS REQUIRED STEPS
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only
INSTANTIATE THE REPORT VIEWER
   - Create a Viewer object
   - Set the source for the viewer to the client documents report source
   - Process the http request to view the report
   - Dispose of the viewer object
==================================================================*/
* This line creates a string variable called reportname that we will use to pass
* the Crystal Report filename (.rpt file) to the OpenReport method contained in
* the AlwaysRequiredSteps.jsp.
String reportName ="SimplePreviewReport.rpt";
%>
<%
/* ALWAYS REQUIRED STEPS
Include the file AlwaysRequiredSteps.jsp which contains the code
for steps:
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only */
%>
<%@ include file="AlwaysRequiredSteps.jsp"%>
<%
/* INSTANTIATE THE REPORT VIEWER
There are three Report Viewers:
1. Crystal Reports Interactive Viewer
2. Crystal Reports Viewer
3. Crystal Reports Parts Viewer
The choices are CrystalReportsInteractiveViewer.jsp, CrystalReportsViewer.jsp,
CrystalReportsPartsViewer.jsp
Note that to use this include you must have the appropriate .jsp file in the
same virtual directory as the main jsp page.
=============================================================================
    DISPLAY THE REPORT
    - display the report using one of the Thin Client DHTML viewers
   Include one of the DHTML Viewers.
    - Crystal Reports Interactive Viewer          =   CrystalReportsInteractiveViewer.jsp
    - Crystal Reports Viewer                                        =   CrystalReportsViewer.jsp
    - Crystal Reports Parts Viewer                         =   CrystalReportsPartsViewer.jsp
    Note** - To use the report parts viewer successfully you are required to
    choose and name three objects in the report to Node0, Node1 and Node2.
    You can access an objects name by using the Format Editor dialog box.
    For more information on the Format Editor Dialog Box and setting objects
    names, please refer to the Help Contents (Help Menu->Crystal Reports Help)
    or by pressing F1
=============================================================================*/
%>
<%@ include file="CrystalReportsInteractiveViewer.jsp" %>
</body>
</html>

Thanks Tien-Chih Wang. It worked...well I'm getting a new set of errors, but progress has been made!
I understand that if placed in the common directory the jar will be available to all webapps but why does it make a difference whether a jar file is placed under the $TOMAT_HOME/common/lib or $TOMAT_HOME/webapps/appname/web-inf/lib directory if I only need to access the jar from one webapp?

Adobe Reader 9.x does not respond when right clicking in Save as Copy pane

I have tried different versions of Adobe 9.x (patched) on a Windows 7 32bit system I still have the same issue. When ever I do a save as copy to a network drive (doesn't happen on the local C: drive) and right click to get the drop down menu to create a new folder Reader just hangs and shows not responding. I have waited up to 20 minutes and I have to force Reader to close.Ii have even tried to close it and look for a solution through Windows 7 with no luck. I can save to any network drive I just can't right click to open up the drop down menu.
Has anyone esle expereniced an issue like this.
Thanks.
Mike

Anyone going to tell me how to do this uninstalling and installing??????????
I don't want to mess things up even more! Geez--I'm almost 60 years old,
need to work and this might be costing me a job. I'm not 20 and text and
e-mail etc every day. I'm just asking for a little help that as I see it ,
is due to a "glitch" with Adobe's software. They can easily in their
technological minds put a warning on anything before someone downloads
anything such as "If you download this and you have already downloaded
that,, then it won't work." How tough would that be??? They, like most other
major corporations, are in it for the money. What has happened to customer
service???
I need a step by step with my hand held and so it won't screw up things even
MORE. Adobe...get your customer service and your software together...This is
draining. I may lose a job over it. I need to have my computer running well
at this point in time as there is no extra time to spend dealing with
software issue that are a result of Adobe's software incompatibility.
I was on the phone for TWO hours last night telling people exactly what was
going on. I even read the error message word for word. No one would help me
unless I coughed up the money that I don't have...and in addition I will
lose a job that might get me some money. This is why I am so upset. Why is
dealing with Adobe always so difficult??? Of course, I am upset. I'm
actually a lovely person. It is just that this stuff rattles my nerves.
Especially when there is a jobwith a raiseinvolved that I may lose as a
result.
Now I had better get dressed and ready for the job I have now before I am
late for work and lose that job, too.....

Adobe Reader 9.x does not retain preferences when called by a 3rd party application.

Similar Messages

Maybe you are looking for