Adobe Reader 9.x for Linux Spanish Language

Are there any version of 9.x Adobe Reader with spanish language.
I could help in translating.
Thanks a lot,
Andres.

Hello Andreas,
Thanks a lot for your enquiry about Adobe Reader for Linux 9.x version for Spanish language.
Unfortunately, 9.x was never released for Spanish language.
The latest Reader to serve your purpose will be 8.1.7
You may download it from ftp://ftp.adobe.com/pub/adobe/reader/unix/8.x/8.1.7/esp/
Thanks and Regards
Atanu Dhar
Email: adharATadobeDOTcom

Similar Messages

  • Adobe Reader 9.3 for Linux: Segmentation Fault in PPKLite.api

    Adobe Reader 9.3 cannot open signed pdf files on our system (64-bit Fedora 10 Linux, with 32-bit compatibility libraries installed). It crashes with a segmentation fault any time one tries to open the following file:
    http://www.utoronto.ca/ic/software/forms/matlab_concurrent_renewal2010.pdf
    Running with ACRODEBUG=1 and ACRO_CRASHLOG=1 results in a zero-length crash log file and the only debug messages shown are
    Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api ... [dlopen success for Annots.api, handle = 0xc4548f8]
    Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api ... [dlopen success for AcroForm.api, handle = 0xd0c3a50]
    Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api ... [dlopen success for DigSig.api, handle = 0xd0dcc68]
    Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/EScript.api ... [dlopen success for EScript.api, handle = 0xd126ac8]
    Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/PPKLite.api ... [dlopen success for PPKLite.api, handle = 0xd7b1ff0]
    If I run the gdb debugger on /opt/Adobe/Reader9/Reader/intellinux/bin/acroread, it shows the segmentation fault occurring inside /opt/Adobe/Reader9/Reader/intellinux/plug_ins/PPKLite.api (but since the file is stripped, all it shows is the binary offset of the segfault). I do have a coredump, though.
    If I remove the PPKLite.api file (or rename it to PPKLite.api.hide -- note that chmod -x does not work, nor does renaming it to something else that still ends in .api, unlike some workarounds I've seen on the web for similar problems in earlier versions of Adobe Reader), then Adobe Reader can open the file without crashing, except that without PPKLite it cannot validate its signature and so it displays the message "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document" -- which I assume is because the signature validation failed due to the absence of PPKLite so it things the document has been altered even though it hasn't been.
    So this removing or renaming of PPKLite.api works around the problem of the crash, at the expense of getting this misleading warning message.
    However, obviously there is a problem inside PPKLite.api that needs to be fixed....

    I'm seeing what must be the same issue: acroread foo.pdf exits almost instantly without any message, but with status 1.
    This is: AdobeReader_enu-9.3.1-1.i486 on a Fedora 12 box,  AMD Phenom II 945.
    If I set ACRODEBUG=1 and ACRO_CRASHLOG=1 and ulimit -c unlimited, and rename PPKLite.api,  *then* I get a nonzero crashlog. Which is:
    /usr/bin/acroread [0x84ff125] [@0x8048000]
    (__kernel_sigreturn+0x0) [0xf7786400] [@0xf7786000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf44dc99b] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e1cf5] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e436d] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e57a3] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41f81b2] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41d4863] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3c44111] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3c47268] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3f7446a] [@0xf3b6d000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3f74e6d] [@0xf3b6d000]
    /usr/bin/acroread [0x892da33] [@0x8048000]
    /usr/bin/acroread [0x873dee9] [@0x8048000]
    /usr/bin/acroread [0x8741530] [@0x8048000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf361fd53] [@0xf35f5000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf3628217] [@0xf35f5000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf36e3f01] [@0xf35f5000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf36e3f9e] [@0xf35f5000]
    /usr/bin/acroread [0x892f7e7] [@0x8048000]
    /usr/bin/acroread [0x8744a50] [@0x8048000]
    /usr/bin/acroread [0x825bdec] [@0x8048000]
    /usr/bin/acroread [0x826bb11] [@0x8048000]
    /usr/bin/acroread [0x826bd32] [@0x8048000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api [0xf4ca1b4a] [@0xf4ba9000]
    /opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api [0xf4ca1bec] [@0xf4ba9000]
    /usr/bin/acroread [0x826c1c4] [@0x8048000]
    /usr/bin/acroread [0x826d0bb] [@0x8048000]
    /usr/bin/acroread [0x850193f] [@0x8048000]
    /usr/bin/acroread [0x85024d2] [@0x8048000]
    /usr/bin/acroread(main+0x87) [0x856686d] [@0x8048000]
    /lib/libc.so.6(__libc_start_main+0xe6) [0x5ddbb6] [@0x5c7000]
    Without renaming the .api, all I got was five 'dlopen success' messages, and "Segmentation fault (core dumped)", but a zero length log.
    Don

  • When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    Hi,
    I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
    Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
    Latest version of Adobe Reader:- http://get.adobe.com/reader/
    If you still experience the same issue, please share the following information:-
    - Screenshot of Adobe Reader showing printer options
    - Screenshot of Microsoft Word showing printer options
    - Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
    Regards,
    Nakul 

  • How to download adobe reader v 10 for computers without internet connection

    Dear Sir
    I would like to downlaod the latest version of adobe reader v 10 for my two other PCs which do not have an internet connection., Could you please help me and direct me to the link where I can download this version for and take it on a pendrive to the other two PCs.
    Regards
    Dr Alok Modi MD

    You can download the offline installer from http://get.adobe.com/reader/enterprise/

  • Adobe Reader Plugin needed for Safari

    How can I get the Adobe Reader plug-in for Safari?

    Hi,
    Default install of Adobe Reader X package has Browser plug-in checked for install. Did you customize your installation and unchecked this option which indicates you dont want to install browser plug-in. Other possibility could be that you are using both Reader 9 and Reader X in your system and after Reader X install, you have updated Reader 9 assuming updating 9.4.0 to 9.4.1. This will change the plug-in version back to 9.4.1 (latest update).
    One way to have version X is rerun Reader X installer and it will repair your plug-in to version 10.0.0. As an advise do not use both Reader 9 and Reader X in same system (though this is possible). You can simply delete version 9 application and continue working with Reader X installed.
    Secondly to answer your question that Safari keeps on asking to choose Reader application, what you can do is  open com.adobe.acrobat.pdfviewer.plist in /Library/Preferences in any plist viewer. It should have a key - WebBrowserUsePath. This should be pointing to correct reader application on your system. Normally its value is something like - file://localhost/Applications/Adobe%20Reader.app/
    In your case you have moved Adobe Reader.app to /Applications/Local-A/PDF Software/Adobe Reader.app
    So change the value of this key to point to correct application. Here it should be - file://localhost/Applications/Local-A/PDF%20Software/Adobe%20Reader.app/
    This will ensure that Safari does not prompt you again.
    Thanks,
    Karan

  • Adobe Reader Plug-in for Chrome

    I was wondering if there was going to be any releases soon to resolve the issue with the Adobe Reader Plug-in for Chrome due to Chrome no longer supporting NPAPI? I know there is a work around found on Chromium Blog: The Final Countdown for NPAPI : "We will provide an override for advanced users (via chrome://flags/#enable-npapi) and enterprises (via Enterprise Policy) to temporarily re-enable NPAPI while they wait for mission-critical plugins to make the transition." However, that work around will no longer be available come September 2015.
    Please let me know if anyone has any information as to if the next  version of Reader plug-in will be supported in Chrome, and if not when?
    Thanks!

    Look for a plugin that supports PDF; Reader is an application, not a file format, so it may not be listed that way in the plugin list. If not, you may just have to download the PDFs and open them in Reader manually but you can try asking for help in the Chrome forums:
    http://productforums.google.com/forum/#!forum/chrome
    Regards.

  • Adobe Reader Plug-in for Google Chrome

    I use the Adobe REader Plug-in for Google Chrome. My question is: Is there a way to change the default zoom?

    The default zoom for the plugin should be the same as for the standalone Reader.  Is it not?

  • How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?

    How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?

    Hi,
    Assuming that you have Reader 9.3.4 already installed on your machine, you can try the following to make Reader 9.3.4 as the default PDF opening application:
    1. Right click on any PDF on your system and click on the "Open With" Option in the context menu that appears. In case you get another submenu, click on Chose Program in that menu. (In case you do not see any "Open With" option, then hold down the Shift key and right click on the file)
    2. Click on Browse button in the dialog that appears, and select Reader 9. Make sure that you select the checkbox for "Always use the selected program to open this kind of file"
    3. Click on OK.
    This will make Adobe Reader 9 as the default viewer for all PDFs on your system.

  • When I download Adobe Reader, it asks for a password.  It doesn't accept my Adobe password.  What password is it searching for?

    When I download Adobe Reader, it asks for a password.  It doesn't accept my Adobe password.  What password is it searching for?

    Then try leaving the password field blank and hitting enter. If that doesn't work, you have a password (and would be beyond the help available in the Adobe forums).

  • When will Adobe Reader Touch App for Surface be able to draw on documents like the desktop application?

    When will Adobe Reader Touch App for Surface be able to draw on documents like the desktop application?

    We have noted down your feature request. We might consider providing support for drawing on PDFs in our upcoming release.

  • I downloaded adobe Reader XI sucessfully for Windows but I cannot open pdfs.

    I downloaded adobe Reader XI sucessfully for Windows but I cannot open pdfs.
    Any suggestions?

    I am able to open them now, but I have to open the program first and then open the file through that. This doesn't make sense why I can't just open by clicking on the file.

  • Is there a adobe reader XI version for the surface tablet.  I recently purchase this to be able to s

    is there a adobe reader XI version for the surface tablet.  I recently purchase this to be able to sign contract and serfice request on the go without having to print and scan back in documents.

    So it seems:
    http://forums.adobe.com/community/adobe_reader_forums/metro?view=discussions

  • Adobe Reader 8.1.2 (linux) hang at startup

    We have a number of users who have reported hangs when trying to start Adobe Reader on our CentOS 4.5 linux workstations (CentOS 4.5 is a RedHat Enterprise Linux 4.5 rebuild). When this occurs, the X-server is locked for a minimum of 10 seconds, sometimes longer, until the Reader window finally comes up.
    I was able to duplicate this behavior on my desktop workstation; of course, once I tried to run the program through strace I no longer saw this behavior.
    Have any other users here seen this behavior? Any idea what is causing it, or is there a workaround to mitigate the problem?
    John Perkins

    I was finally able to get an strace of a delayed acroread startup with the Xming xserver (displaying on Windows). I can't use XManager or Exceed (or similar products) when trying to display on a linux desktop.
    The strace output I've collected suggests Adobe Reader is trying to
    stat() all the font files available at startup time. We run with an AFS filesystem here, and some fonts are in AFS...so those fonts get cached on local disk when Adobe Reader first runs, and stat()'ing the font files goes much faster the next time around.
    It may be necessary for us to move these font files to the local disk at some point to improve performance with Adobe Reader, and maybe with other apps.
    Some detail as to how fonts are found could be helpful...does Reader try to generate a list of paths from the X-server somehow? Or does it find font paths some other way?
    John

  • Adobe Reader Transitition Update for SCCM

    Hi all,
    i just downloaded the latest Adobe Reader 11.X Catalogs for SCUP.
    I would like to upgrade all of our 10.X Adobe Reader Versions to 11.X, but the Transition Update "Adobe Reader 10 Transition"
    seems to work only for english Installations. All of my other Clients report "not required" and so i can't push that update to those clients.
    Is there anything i'm doing wrong? Will there be another Transitition Update to upgrade other languages also?
    Thanks a lot.
    Best regards
    SCCMLer

    hey it's again me but new account as i forgot the password and the reset mail does not arrive
    I've deployed the following Adobe Reader Versions and it would be great if i could upgrade all of them witha Reader 11 SCUP Catalog Update.
    Adobe Reader X (10.1.8)
    Adobe Reader X (10.1.8) - Deutsch
    Adobe Reader X (10.1.8) - Español
    Adobe Reader X (10.1.7)
    Adobe Reader X (10.1.7) - Deutsch
    Adobe Reader X (10.1.7) - Español
    Adobe Reader X (10.1.7) MUI
    Adobe Reader X (10.1.6)
    Adobe Reader X (10.1.6) - Deutsch
    Adobe Reader X (10.1.6) - Español
    Adobe Reader X (10.1.4)
    Adobe Reader X (10.1.4) - Deutsch
    Adobe Reader X (10.1.4) MUI
    No chance? Why do they not also upgrade other languages? Will it be released someday?

  • Adobe Reader 9 - Where are the Extended Language Font Packs?

    To all:
    I have been unable to locate where Adobe is hiding the font pack for Reader 9! I cannot find it anywhere on their site. I can find it for the 8.x Reader, but nowhere for 9.
    I have found the MUI Reader (which is over 285MB in size) which does contain all of the font packs, plus the foreign language interface versions of Reader, but I only want the font packs to add to the Standard English Reader.
    If anyone knows what happened...or what Adobe decided to do differently with font packs with Reader 9, please share any information you may have.
    Thanks for listening and for the feed-back.
    Mark

    I think I've found them:
    ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.0/misc/
    I'll give this a try and see if it gives me what I want so that I can view Japanese fonts in 9.3.
    Mark

Maybe you are looking for

  • Difference between Valuated and Non valuated Sale order stock

    Hi All, Can anybody tell me the difference between the above said subject with the steps involved in each scenario. That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order. With Journal entries at each step a

  • Center text in SLiM Login Manager

    I'm working on some SLiM themes and I was wondering if it's possible to center the text of the username and password the user is typing? It always starts from the left and I haven't found any option to change this behaviour? Is it not possible? I hop

  • Can I use wireless WIFI on a 9650 at home and save data usage

    Hi, I am ordering a 9650, and have a wireless network at home. I was going to go with the $15 data plan, because i use email mostly. Someone said I could use wifi on my wireless network at home for web pages to save data not going thru the verizon ne

  • My still photos won't all show in my movie

    My movie has both still images and video.  However, i movie gets stuck on the previous video clip in playback and the sequence of still photos won't appear.  I've not had this problem before.  Any ideas? Thanks

  • Render text item with procedure call

    I have made several custom item types with custom attributes, and I use a procedure calls to render them in my region. For example, the pl/sql call from the item can look like: portal.write_text and I use p_id and p_text as attribute parameters. When