Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

Similar Messages

Adobe Reader does not print checked box

I used Latex to make a pdf survey. If a box is clicked, an X (exact symbol number in latex: \ding{54}) appears. But if I want to print the document, the X is not printed.
Additional information:
- The X is just visible, if I click somewhere else, after checking the box.
- The X is also not visible in the printing preview.

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

Adobe Reader does not print to HP 1320 (neither Leo nor Tiger)

As the topic says, we cannot print from Adobe Reader (also when the Safari plugin is used) to the HP 1320. Just the light flashes for some time, and then ... nothing.
The HP1320 is not connected via USB, but over a print server and parallel cable ("centronics").
The same problems appear for some G4 with Tiger and some G5 with Leo.
The same problems appear with different versions of Adobe Reader.
No problems with printing the same PDFs with Vorschau ("Preview"), or any other application, only with Adobe Reader.
I also tried lots of different settings in the Reader's printing dialogue window, without any result.
Strange?

We had the same problem with protected mode and the 1050C. Symptoms were when selecting ANSI E (or other sizes) in the print dialog, the preview remained at 8.5 x 11 and as mentioned in earlier posts, the job never spools. This was on a Win7 Pro 64 bit system.
At first I thought it was the driver as Microsoft lists the 1050C as incompatible with Windows 7 (32&64 bit) on their hardware compatibility site. Our print server is Server 2003 and I couldn't get the 64 bit driver installed on the server, so the way I installed the 64 bit driver (in this case) was to use the add printer wizard in control panel, choose add a local printer, create a standard tcp/ip port with the corresponding IP on the print server and then click the 'windows update' button to update the local driver database. I was then presented with both PCL and PS driver choices for the 1050C (chose HP DesignJet 1050C by HP). Whether this is actually the Vista 64 bit driver I don't know, but it's presented in the driver database on Win7 as a certified driver.
Anyhow, I was clued into the application possibly being the issue because I had two identical systems where I knew I had installed the printer in the same way on both systems. One person however, wasn't having the problem. On closer inspection, the user that was plotting successfully was using Acrobat Pro, not reader.
I then remembered having already encountered another problem with protected mode. We had a few people selecting several pdfs at once and then just right-clicking and printing them en masse without opening them. After upgrading to Acrobat X, they could no longer do that. Again, protected mode was the culprit. A whole bunch of acroread processess would stack up but only one of the docs or none of them would print. So remembering this earlier problem & resolution, I turned off protected mode and the issue with the 1050C was resolved. For now, I'm just turning off protected mode as needed on a case by case basis.

Adobe Reader does not print hatches created in AutoCADD. Is there a solution to this problem? The hatches display, just will not print.

I have created .dwg files in AutoCadd LT and then created a .pdf file while in AutoCadd LT. I can print my AutoCadd drawing correctly while in AutoCadd, but when printing the .pdf file created in AutoCadd, only parts of the file are printed. All 'hatches' are ignored and not printed.
Does anyone have an idea how to resolve this issue?
Thanks,
Ray

pwillener,
Thanks for the advice. Unfortunately, the 'Print as Image' button is greyed out and not available.
Still nothing works properly.
Ray

I can not print more than page one of PDF file I have loaded with 2013 version Firefox; I am able to with IE. Vista Home Prem is my OS and I have a 64 bit Dell

I have the most current version of MS Home Premium Vista. I run it on a 64 bit Dell Studio Laptop.
I have just started suing Mozilla Firefox 2013 Beta version.
I usually used Firefox vs IE as my browser and have my Yahoo email set as my home page.
When I tried to print a a several page PDF file I was accessing using Firefox, all it it print previewed and ultimately printed was page one. This happened regardless of the PDF file (e.g. those on the IRS.gov website). When I switch over to Internet Explorer and try to read the same files, I have no problem.
On 2012 versions of Firefox I had no PDF printing problem. I do think there is a bug in the latest version.

Top left (Orange) Firefox button, Print, Print Preview. Does everything look correct? You may also click the icon that looks like a "DISK" to save, which allows you to save it to your computer and CTRL+P will allow you to print.

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9. Why?

I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files. For instance, when trying to open a PDF file with the name
filename10.5.11.pdf in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

The version is Adobe Reader 10.1.0    I will request the latest version
and let you know if that fixes the problem
Actually I had changed the name of the file so our associates could access
the file (changed the . to a hyphen) It still made me wonder why Reader
wouldn't open it at that time.
Thanks again for you assistance and I will let you know if this resolves
the issue.
Regards,
Susan
From:   Ankit_Jain <[email protected]>
To:     SusanPleso <[email protected]>
Date:   10/19/2011 12:56 AM
Subject:        Adobe Reader does not recognize file name
(filename10.5.11.pdf) but does in Adobe Standard 9. Why?
Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
does in Adobe Standard 9. Why?
created by Ankit_Jain in Adobe Reader - View the full discussion
Hi Susan,
Thanks for providing the information.
Could you also let me know what is the exact version of Adobe Reader on
your system. You can check the same y clicking on Help > About Adobe
Reader X.
In case its not 10.1.1, please try updating to the latest version and see
if the problem persists.
Also, does any other PDF with a different filename open in Internet
Explorer correctly?
Thanks
Ankit
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3979020#3979020]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Reader Does Not Respond in Windows 8

I need to do a simple edit of a pdf. I've been editing pdfs using nothing but the free Adobe reader for years. Now I got a new laptop - 64 bit Windows 8 and I installed the current reader. I need the Adobe reader for other programs I work with. I have noticed that the adobe reader is slow to open and constantly says "not responding." I also cannot get it to respond so that I can fill in a form (i.e., a basic edit), which I could always do. Please tell me how to fix this!

I figured it out! I have Adobe Reader XI on my desktop. I opened it up. I went to Edit/Preferences/Security (Enhanced) and disabled the "Protected Mode at startup." My Adobe pdfs now respond and I can edit them without issue.
Date: Tue, 28 Jan 2014 10:28:26 -0800
From: [email protected]
To: [email protected]
Subject: Adobe Reader Does Not Respond in Windows 8
    Re: Adobe Reader Does Not Respond in Windows 8
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
Do you have Adobe Reader Touch for Windows 8? Or Adobe Reader XI for Windows desktop?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6061471#6061471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6061471#6061471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6061471#6061471. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Acrobat 9 bug? - Print Pages function does not print all bookmarked pages

We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
I would appreciate any suggestions on other possible workarounds.
Here is the bug report I submitted to Adobe:
Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
Steps to reproduce bug:
1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.

I'm having the same issues. Using the latest version 9.3.3. Is this a bug? I tired calling adobe but their CR sounds like 3rd country only. Anyone can shed a light on this issue?

When text is low on the page, it does not print on the page!

Office Jet J6480, Windows 7 32 bit.
Sometimes pages with a content line near the bottom of the page, does not print or the characters are only partially
printed on the output page.

Hello, you may be able to fix this problem on your HP Officejet J6480 All-in-One Printer by following the steps in the following document: "The Product Does Not Print the Bottom Page Border in Microsoft Office":
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01671543&tmp_task=solveCategory&cc=us&dlc=en&la...
There are two more links inside that web page with some other solutions if you are experiencing this problem with other Operative System:
-Printed Text is Cut Off on the Last Line of the Page in Windows XP
-Printed Text is Cut Off on the Last Line of the Page in Windows Vista
I am an HP employee, Printer/All-in-One Expert.
Give Kudos to say "thanks" by clicking on the "thumps Up icon"
Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.

Print range does not print the last page in the range.

Adobe Reader for New IPAD - The print range function does not print the last page in the range. For example, if you enter a print range of 2-18, pages 2-17 print and page 18 does not print. Also, if you enter a print range of 9-9, page 8 prints and page 9 does not print.

I have the Epson 4540 printer. I don't know for sure if it connects via AirPrint. I didn't do any thing to set up Air Print. The printer is attached directly to my network router and it shows up IPad apps. I have not printed docs from other apps, but I will give it try and let you know.
Christopher J. Bilcz
[email protected]

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Similar Messages

Maybe you are looking for