Adobe reader patches
Where can we find these patches ?
For Windows:
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Similar Messages
-
About installing Adobe Reader patch 10.1.7
I had installed Adobe Reader 10.1.3 in Windows server (64 bit) version 6.0.6002.
To overcome vulnirabilities APSB12-16, APSB13-02 and APSB13-07 decided to install Adobe Reader patch 10.1.7.
Do i require to install Adobe reader pathces 10.1.4, 10.1.5 and 10.1.6 before applying patch 10.17 ?
or can i install Adobe Reader patch 10.1.7.Reader XI will run on Vista. It isn't "officially" supported, but I have a testing machine with Vista Ultimate X64 and Reader XI. It works as well as it does in Win 7.
-
Unable to install Adobe reader Patch
Hi,
kindly help me on below issue..
I am not able to install Adobe reader patch file it is installing some systems but maximum of systems are getting failed. Here below I have attached the log file and the installation batch file whatever I am using.
The Command I am using through batch file.
@echo off
"%~dp0AdbeRdrSecUpd11008.msp" /quiet /passive /q /norestart1642 = "The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer
and that you have the correct upgrade."
Adobe reader updates are *not* cumulative and only apply to specific versions and patch levels. Adobe has tables on their enterprise support website that detail what patches are applicable to what versions. Here's the one for Reader 10 (can't find the one
for Reader 11 but I'm sure it exists).
Jason | http://blog.configmgrftw.com | @jasonsandys -
Adobe Reader Patches - lack of cumulative patches!
Dear Adobe,
Could you *please* think about us poor sods who have to actually maintain your products in enterprise setups?
I dont want to have to install V9.1.1. and then patch with 9.1.2 and then patch with 9.1.3. This is a nightmare. How about either releasing a straight 9.1.3 base product or a consolidated patch that can be applied straight to 9.1.1? You know - like the majority of other software vendors do...? (I know not all do, but in this day and age the lack of cumulative patches is inexcusable).
Yes I'm ranting, but I'm getting rather tired of lots of insecure products and poor management practices from vendors.
Cheers,
MikeMike,
This is a User 2 User forum. You are not addressing Adobe here. Here is a good place to adddress Adobe:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Another place you can write is:
Corporate headquarters
Adobe Systems Incorporated
345 Park Avenue
San Jose, CA 95110-2704 -
Is it possible to create an msi package if the product you are upgrading is Multilingual (MUI) and the update(msp) you are applying is not Multilingual (MUI) but "All languages"?
Please download the latest Adobe Reader patch from the below mentioned location, it will work with MUI installer.
ftp://ftp.adobe.com/pub/adobe/reader/
~Deepak -
The display problem of Adobe Reader 11.0.09
Hi, everyone,
My operation system is Windows XP SP3 Professional.
I encountered a strange display problem of Adobe Reader 11.0.09.
The problem happened not only at Adobe Reader 11.0.09 Chinese Traditional, but also English United States.
The display problem such as two pictures as follow.
The strange problem was that menu bar covered by toolbar items or disappeared.
Please tell me how to resolve the problem.
Thanks a lot.Thanks for your help, Ajlan huda.
Could you tell me where I could find the system requirement about Adobe Reader patch 11.0.09?
I couldn't find any information about system requirement of Adobe Reader patch 11.0.09.
I knew Adobe Reader 11 could install on Windows XP SP3 just all.
I could install and upgrade Adobe Reader to 11.0.09 as the following picture.
I will roll back the version of Adobe Reader from 11.0.09 to 11.0.07 and test the problem appear or not. -
Does Adobe Reader for iPad save annotations by/in itself (once uploaded from dropbox I can still see them after closing the app or switching documents)? I lost some valuable annotations while switching documents and apps over time. How do I save them? Only by sending it to dropbox for instance?
It saves the file when:
1) The app goes to background
2) A share action (open in, email, print) occurs
3) A form submit occurs
4) You close the document by going to "Home" or "Documents", or open another document
One issue that people encounter is that they open the file in a reader that does not support annotations (like the dropbox PDF view or the iOS Mail app). It doesn't sound like this is the case for you though, since you do see the annotations.
There is a known issue, where on a small number of documents with specific properties, we fail to save changes. This is an issue that we have fixed and will be in our next release. The release is currently pending approval by Apple. It's possible that you encountered this issue, and if so, I apologize.
Info on the upcoming release here:
http://blogs.adobe.com/readermobile/2012/04/30/adobe-reader-patch-update-10-2-1/
Pat -
I am trying to update our Adobe Reader and Acrobat Pro to 11.0.10 using the default MSP packages with SolarWinds Patch Manager. All of the systems keep reporting as 'NOT APPLICABLE'. All of the workstations have Reader11.0.09, with about 10% still on 11.0.08 (due to the fact that the reader 11.0.09 package only patched about 2/3 of the systems). All systems that have Acrobat Pro are 11.0.09.
In SolarWinds I am using the "Adobe Systems, Inc. Packages" node.
Adobe Systems Acrobat 11 Catalog
Adobe Systems Reader 11 Catalog
and the SW Patch Manager downloads the msp's straight from Adobe.
I have checked the msp's manually and they will update at least back to 11.0.07 in Reader, and 11.0.0 in Acrobat Pro. (I had an old stand alone system that still had Reader 11.0.07, and I did a new install of Pro and went straight to update 11.0.10)
The SolarWinds Tech said, "Okay. That content is produced by Adobe. Any questions concerning applicability logic or diagnosing why a package reports as NotApplicable when that's not expected would need to be directed to Adobe, as they are solely responsible for that content and its behavior".
I am new to SolarWinds Patch Manager, and any help or advice would be greatly appreciated.It sounds like you are attempting to use the SCUP catalogs outside of the MS solution. I can almost guarantee you that Adobe didn't test it if it's not referenced in the ETK: 11 SCCM-SCUP — Enterprise Administration Guide
That being said there "should" be logging available in any deployment solution. Since I am not familiar with Solar-Winds particular solution I can't say if it logs errors and how verbose those logs might be. If you have logs then post the output and the forum members "might" be able to assist you. -
Hello,
I have all the files, MST and the patch located in one folder. I am trying to use the following MSI command lines locally on my computer before I can attempt to deploy this via SCCM 2012. I am having issues either with the package not compatible or using /p and getting the MSIEXEC help window prompt. I've tried a few command lines:
msiexec /i AcroRead.msi PATCH="AdbeRdrUpd11010_MUI.msp" TRANSFORMS="AcroRead.mst"
msiexec /i AcroRead.msi /p AdbeRdrUpd11010_MUI.msp TRANSFORMS="AcroRead.mst"
msiexec /i AcroRead.msi TRANSFORMS="AcroRead.mst" /p AdbeRdrUpd11010_MUI.msp
Adding /qn on the end makes the install work silently when not attempting to include the patch, but fails to install it silently when only using the transform file that I have selected in the wizard to silently install.
We have 5 different versions from 8.0 through 10.0 in our environment of 3000 machines. Sadly this was not managed before...I can easily update our current 11.0 versions that range from 11 to 11.0.09 by only applying the patch to them but need to get the full install working for the 2500 machines I need to target.
I tried using the /a command which seems to work, but creates program files and common files folders inside my adobe folder on the desktop when executing it from the cmd. Am i suppose to package that folder all in one and then use the /i command to install adobe? I've been researching for a week but finally hit a wall where I dont think I am getting anywhere.
Thank you in advance,
KevinI have almost answered my own question as I just came across this link
https://it-god.co.uk/deploy-adobe-reader-xi-11-0-10-with-sccm-2012/
This is for the plain reader version, but we use MUI now (due to other languages required in our environmet). I get to the part where it asks to apply the patch to the AIP folder but it fails.
msiexec /p AdbeRdrUpd11010.msp /a C:\Reader\11.0.10\AcroRead.msi
I changed this to account for the MUI naming,
msiexec /p AdbeRdrUpd11010_MUI.msp /a C:\Reader\11.0.10\AcroRead.msi
But I get the windows prompt that says this package can not be opened, please verify. I ensured that both the patch and base install were MUI versions, and i downloaded fresh copies of each. I also unblocked the patch so that it can run. No luck so far.
EDIT: Using another guide i found the command line (modified the path to my location) and this worked,
msiexec /a C:\adobe\Reader\11.0.10\AcroRead.msi /qb /p AdbeRdrUpd11010_MUI.msp TARGETDIR=C:\adobe\Reader\11.0.10\ -
Adobe Reader 11.0 mui and patches
I am trying to install reader 11.0. I use the Wizard XI to configure the install to turn off autoupdates. then saved it. I should be able to now run the setup.exe and it will look at the setup.ini file for install configurations. It does work and install 11.0 MUI however when I add the line shown below to install the 2 msp's (PATCH=AdbeRdrUpd11001.msp;AdbeRdrSecUpd11002.msp) it is not installing them it just installs the 11.0 version and not the patches. Can you tell me what I am doing wrong? thanks
[Startup]
RequireOS=Windows 2000
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sl"1033" /spb /rs
[Product]
msi=AcroRead.msi
Languages=1033;1031;1036;1041;1034;1040;1043;1046;1053;1030;1035;1044;2052;1028;1042;1069; 1027;1050;1029;1038;1045;1048;1049;1051;1060;1055;1058
1033=English (United States)
1031=German (Germany)
1036=French (France)
1041=Japanese
1034=Spanish (Traditional Sort)
1040=Italian (Italy)
1043=Dutch (Netherlands)
1046=Portuguese (Brazil)
1053=Swedish
1030=Danish
1035=Finnish
1044=Norwegian (Bokmal)
2052=Chinese Simplified
1028=Chinese Traditional
1042=Korean
1069=Basque
1027=Catalan
1050=Croatian
1029=Czech
1038=Hungarian
1045=Polish
1048=Romanian
1049=Russian
1051=Slovak
1060=Slovenian
1055=Turkish
1058=Ukrainian
CmdLine=TRANSFORMS="Acroread.mst" ADDLOCAL=ALL
PATCH=AdbeRdrUpd11001.msp;AdbeRdrSecUpd11002.msp
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[MSI Updater]
Path=http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.0/misc/WindowsInstaller-KB893803-v2 -x86.exeI got it figured out
I was using the non mui patch on the mui version of 11
RequireOS=Windows 2000
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sl"1033" /spb /rs
msi=AcroRead.msi
Languages=1033;1031;1036;1041;1034;1040;1043;1046;1053;1030;1035;1044;2052;1028;1042;1069; 1027;1050;1029;1038;1045;1048;1049;1051;1060;1055;1058
1033=English (United States)
1031=German (Germany)
1036=French (France)
1041=Japanese
1034=Spanish (Traditional Sort)
1040=Italian (Italy)
1043=Dutch (Netherlands)
1046=Portuguese (Brazil)
1053=Swedish
1030=Danish
1035=Finnish
1044=Norwegian (Bokmal)
2052=Chinese Simplified
1028=Chinese Traditional
1042=Korean
1069=Basque
1027=Catalan
1050=Croatian
1029=Czech
1038=Hungarian
1045=Polish
1048=Romanian
1049=Russian
1051=Slovak
1060=Slovenian
1055=Turkish
1058=Ukrainian
PATCH=AdbeRdrUpd11001_MUI.msp;AdbeRdrSecUpd11002.msp
CmdLine=TRANSFORMS="AcroRead.mst"
PlatformID=2
MajorVersion=5
ServicePackMajor=4
Path=http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.0/misc/WindowsInstaller-KB893803-v2 -x86.exe -
Adobe reader 9.1.3 patch package wont open
Hi everybody i am having a problem with adobe reader 9.1.3
If i click on the icon in start menu/all programs/adobe reader, i get a message (problem with shortcut,this patch package could not be opened. Verify that the patch package exists and that you can access it,or contact the application vendor to verify that this is a valid windows Installer patch package)
iI tried to uninstall it from add remove and i get the same message.
If i try to download it from (www. adobe.com) i get the same message,i even tried system restore still nothing i downloaded windows cleanup and it did not work for me, c cleaner not better. So now i dont know wath to do i hope i dont have to reinstall windows cause i just did a few weeks ago.
Thanks for your help in advance. hope someone can help me.Hi again i just wanted to say a real big thank you to you for helping me with my issue with adobe reader 9.1.3.
The windows installer clean up you have gave me worked its now gone from add/remove programs but i will still use foxit it s doing the job for now.
again a real BIG thank you and i hope you have a good day. -
Adobe Reader 9.4.5 - Patch could not be open
I have Adobe Reader 9.4.5 installed. On the administrater side I can print from Adobe but use side I can NOT. When I try to reisntall ore remove it I get the message
THis patch package could not be opened. Verity that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package
Please Help
THanksYou can remove the corrupted installation using the Windows Installer CleanUp Utility.
-
I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?
RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened. -
Adobe Reader XI closes when opened and Windows message states a 'Patch' is missing?
Can anyone help. Prior to Adobe Reader XI I had no problems. When opening XI it asks me to close as there is a problem. Then I get a message from Windows (XP) stating that a 'Patch' is missing.
Uninstall Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and reinstall from http://get.adobe.com/reader/enterprise/ -
What is this all about? I know nothing of a "patch package".
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Maybe you are looking for
-
Condition type is missing in Pricing Procedure determination
Hi experts, We have a problem with Pricing Condition type in CRM. We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0". when I c
-
SQL 2005 Upgrade complete! - Post installation tasks questions!
Hi All I have managed to upgrade our DEV and TST ECC6 systems to SQL2005 (from SQL2000) and so far all seems ok however I have a a few questions and checks I would like some help with. I have included my post installation tasks at the bottom of this
-
Fqevents - update z field in BP
hi, I need to update the value of a Z field for a BP while invoicing the account. For this I am using event 608 - Payment Specification: After Database Change. here, I have tried using the FM - BUPA_CENTRAL_CI_CHANGE with IV_XSAVE = space. this one
-
Used trial version of AA pro XI. now tried to order regular XI version ($14.95/ mo.). Order went thru but now I cannot get access to the newly ordered program. What do I need to do?
-
Problem: I was thinking I could free up space on my external hardrive by dumping into the trash my oldest Time Machine back up dates. What has happened is that the oldest files are indeed lost from my computer. Bad Logic: I assumed the most current d