Adobe Reader V9.0 will not install on Windows Vista Ultimate SP1

I have Windows Vista Ultimate Build 6001 and tried to install adobe reader V9.0. The download was fine but when I run the program (AdbeRdr90_en_US.exe) it returns the error:
"NOSSO (R) has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
Close program"
So I guess my questions are
1. Is there a version of adobe reader that will install on windows vista ultimate SP1?
or
2. Is there another pdf reader that will work with Vista Ultimate SP1?
Thanks for any and all assistance!!
Mark

I am getting the exact same error:
I have a brand new HP xw8600 systems with 64 bit Vista Ultimate installed.
Via google I found a suggestion to turn on user account control.
I went to control panel > User Account > Turn User Account Control
checked the box and restarted the system. I ran the install as the administrator. It was a minor improvement. Instead of the error coming up immediately like it was, I got the OS confirmation asking if I wanted to install the program. I got the failure right have selecting "yes"
Running out of clues... any help?

Similar Messages

  • I have the Mac OS 10.9.4  I am unable to read PDF's, so thought I would download the latest version of Adobe Reader.  It will not install.  Is it comparable with my Mac OS?

    I have the Mac OS 10.9.4  I am unable to read PDF's, so thought I would download the latest version of Adobe Reader.  It will not install.  Is it comparable with my Mac OS?

    More information would be good.
    What do you mean by "unable to read PDF's". How are you trying to read them and what exactly happens when you try?
    so thought I would download the latest version of Adobe Reader.  It will not install. 
    Again, what exactly is happening?
    And yes, the latest version should be compatible with your OS.

  • Frame 7.2 will not install under Windows 7 Ultimate

    HELP: FrameMake2 7.2 does not install under Windows 7. Almost at the end of the install it crashes with an empty dialogbox and a warning. Nothing else.
    Any one seen this,
    Keep smiling
    Thomas

    For more info on running things in compatibility mode, these links should help:
    http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows
    http://www.sevenforums.com/tutorials/316-compatibility-mode.html
    There's also a free "XP" add-on that runs apps in a virtual mode with Win7. See:
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    There's also another freebie virtual-machine that will allow you to run most older apps available at:
    http://www.virtualbox.org/

  • IPod will not install on Windows Vista, iTunes is fine?

    Hello,
    I am running Windows Vista Ultimate on 2 computers. One computer connects to my 60GB iPod video just fine, while the other looks for drivers and then fails to find any. I get a window that pops up saying "Insert the disc that came with your iPod" after Windows searches for drivers. Because of this, the iPod does not appear in iTunes, nor does it appear in My Computer. I have tried performing a soft reset on the iPod (Menu/Center combo) which did not work. I have also tried reinstalling iTunes to no avail. This is a brand new Windows installation and I just can't figure out why it won't work. iTunes seems to work just fine in all other respects.
    Thanks,
    Brian
    Message was edited by: kstrike155

    I found these steps here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1286482&SiteID=1&pageid=4
    Scroll down to the quote from WickedMX.
    Basically, C:\Windows\System32\Driverstore\Repository and look for a folder that starts with usbstor. You will probably have two different versions. Open the folder that is the newest version and then copy the files usbstor.inf and usbstor.PNF. Copy them to the C:\Windows\INF folder. Try installing your device(s) again and it should work like a charm!
    Brian

  • Adobe Reader X update will not install

    I got Adobe Reader X by downloading it online from this site I believe. I have no discs or anything. But several times it has wanted to install an update. And when it does I'll get Error 1311 Source File Not found data1.cab
    So why is this happening? Is it because I used a free download off the site and don't have the program on actual disc? There is troubleshooting tips that say uninstall it and all but is this worth doing. I don't want to get rid of it then have to buy it or something. But I am certain I got it off this site so not sure why it won't let me update?

    How does one delete the installer cache files? I couldn't find them in 10.7.2 I IDID find Cache files in the Library, and deleted them all. Still broken.
    My 10.1.1 installer from Adobe runs and immediatly stops about 40% of the way through, and then sits there. The last time I started the install before lunch, and after lunch the installer was in the exact same spot, but said it would take an hour and 45 min to install! I'm running OS 10.7.2 on a 2009 MBP.
    Update:
    OK, I put Adobe Reader 9.4.6 back in my Applications folder. I open it up, and do "check for updates". It says I am up to date, and that there are no new updates.
    The 10.1.1 installer I downloaded DIRECTLY by going to Adobe.com and following the links for my Mac. I even deleted the installer once and then redownloaded it just to make sure I had a good copy. This is the screen I get when I run the installer. It gets to this point in about 30 seconds, always between the "r"and "i" in scripts, and the time remaining just keeps going up. HELP!
    Message was edited by: nathansmith

  • Adobe Reader 8.0 will not install

    I tried many times to install Adobe Reader 8.0, for OS 10.4.8, but even though the "installer" says it is succesful, nothing shows up on the machine except the Adobe install package. Adobe says it works on PowerPC® G3, G4, G5 or Intel® processor with Mac OS X v.10.4.3 or later.
    Can I use Adobe Reader on a new iMac, 2.0GHz Intel Core 2 Duo?
    iMac, 2.0GHz Intel Core 2 Duo   Mac OS X (10.4.8)   purchased Dec 19 2006
    iMac, 2.0GHz Intel Core 2 Duo   Mac OS X (10.4.8)   purchased Dec 19 2006

    I had the same problem with the intel versioin. Worse, it trashed my old install of 7.05 reader and 5.05 (standard).
    I solved the problem by switching to an unmanaged admin user and reinstalling, even though I had admin privileges on the other account
    MacBook Pro 2.166 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

  • Adobe Reader 9.3 will not install because "getPlus+ (R) has stopped working.

    Problem Signature:
    Event name: APPCRASH
    Application Name: getPlusPlus_Adobe.exe
    Application version: 1.6.2.63

    Download the offline installer http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.msi, save it to disk, then close all browser windows and run the downloaded installer.

  • Quick time will not install/unistall windows vista fatal error

    I am unable to install, unistall, or repair quicktime on my computer with vista.
    Before fatal error I see install has insufficient privileges to modify this file:
    C:\Program Files\Quick Time\Quick Time Read Me.htm
    Any suggestions for removing this software to get a clean install would be helpful?

    It will not let me uninstall older versons or install new versions.
    Do you get error messages? If so what do they say? (Precise text, please.)

  • Quicktime will not install to Windows Vista "could not open key..."

    I have been trying to install Quicktime for some time.
    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    I kept trying and was able to install QT, but it would not open. Error messagesaid something about a "side-by-side" configuration.
    I am the only user/administrator of this pc. I have tried all troubleshooting steps on this website, including uninstalling all Apple software and all remnants.
    I tried all troubleshooting steps. My next step is to re-install Windows.
    HP d5000t Windows Vista Vista Ultimate 64-bit, Intel core2 quad Q9450 @ 2.66GHz 8GB RAM

    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    Doublechecking, Alex. Have you tried the procedures from the following post?
    http://discussions.apple.com/thread.jspa?threadID=2475687&tstart=30
    (Although that's about an iTunes install problem on 7 rather than QuickTime install problem on Vista, similar sorts of troubleshooting proicedures can apply in your circumstances too.)

  • BootCamp will not install in Windows Vista

    I installed Windows Vista on my MBP 17" OSX (10.6.4) with no problems. The problem is now when I go to the Vista side, and try to install BootCamp drivers, I get a message saying "Boot Camp x64 is unsupported on this computer model". Does any one know what is wrong? Does my Vista need updating? Thanks for any help.
    Joey

    Welcome to Apple Support Communities
    Windows 8 also works, but only with compatible Macs > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US Note that you can also install Windows 8 in non-supported Macs by Apple, but you will not be able to install the Windows support software.
    As you have got Mac OS X Snow Leopard and after checking that your Mac supports Windows 8, you need to download the Windows support software from this website > http://support.apple.com/kb/dl1638

  • Itunes will not install on windows vista (error message)

    I just got an ipod and am new to this kind of device. I tried to download the itunes from the apple ipod start page. The itunes download ok except for the itunes application, in which it says it can't install the itunes application then it ends with "error 50". I would have to attempt to download again to re-read the error message to be exact. Any suggestion will help thanks.

    Praise God - I found the solution after hours of work: (1) Uninstall all Apple programs (itunes, Quicktime, Bonjour, .....); (2) Go to "Common Files" and delete all Apple files - this might be difficult for some are locked from you - you may have to change the "Owner" of the file in order to delete it - if that doesn't work "Rename the Apple Follder to something like Apple Old - that's like deleting it.  Then download 10.5 from Apple and away you go - yippee.

  • ITunes 10.7 will not install on Windows Vista

    I just got a new iPhone 5, and so I need to update to iTunes 10.7. But, whenever I attempt to install iTunes onto my computer, after completely downloading everything, it starts the install, but after about a minute of this, it stops installing and says, "Errors occured while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually." I have tried to use its suggestion of just downloading iTunes 10.7. It downloads, but whenever I try to install (Welome to iTunes, Add iTunes shortcut to my desktop and Use iTunes as the default player for audio files checked, etc...), the status bar fills (It says Status: Copying Old Files just before it drops to just Status: ) but just sits there, doing nothing. I am also a little unsure of which file I should be trying to use first (there's AppleApplicationSupport.msi, AppleMobileDevieSupport64.msi, iTunes64.msi, and SetupAdmin.exe). I have not tried uninstalling iTunes and completely reinstalling it yet, however, mainly because I have nowhere to store my library in the meantime. I am not doing this as an administrator, but I did try the exact same thing on my administrator account, and it did not work. Any help is appreciated. Thanks!

    To clarify, I already have iTunes 10.6. Also, I just checked back on the iTunes installer (the manual one) and it now says: "iTunes Installer Completed
    The installer encountered errors before iTuens could be configured.
    Errors occurred during installation. Your system has not been modified.
    Please run the installer again, or click Finish to exit."

  • ITunes 7.6 will not install on Windows Vista 32-bit (iPod Service problem)

    Basically, my story is near-identical to the one here:
    http://discussions.apple.com/thread.jspa?threadID=1572880&tstart=0
    EXCEPT that after trying EVERYTHING rmurtagh did, I STILL had no success. Specifically, when I try to install iTunes, I get the error "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services." and when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!

    when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!
    Are you getting that if you try to manually restart the iPod Service in Services.msc?
    If so, do you get an error message number with the message? If so, what number is it?

  • I installed adobe reader but it will not display any pdf

    I installed adobe reader but it will not display any pdf

    What version of Reader in what OS? Does the program open? What happens when you use File->Open to open a pdf file on your computer? Any error messages?

  • Adobe Photoshop Elements 13 will not install on my desktop computer. It does install on my  laptop. Both computers are running Windows 8.1 64 bit Pro. What is the solution?

    Adobe Photoshop Elements 13 will not install on my desktop computer. It does install on my  laptop. Both computers are running Windows 8.1 64 bit Pro. What is the solution?

    why won't it install?  ie, do you see an error message?
    if you have no idea, check the installation logs - Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Maybe you are looking for

  • Call outside function with same name in a package

    I created a function as follows: create or replace function f1 return number is begin return 1; end; This f1 is to be called in a package created below. Then I create a package with a function in it, as follows: create or replace package pack1 as fun

  • HT5654 Trouble udating itunes to synce with iphone (updated to ios 7)

    I recently downloaded ios 7 for my iphone however, now it will not sync with my itunes (MAC). It tells me to update my itunes, unfortunatley every time i try to do so, my mac says i am running the latest version (which i know for a fact i am not). pl

  • Problem with jog control in canvas and timeline

    Hi, please help When I try to 'jog' (see the video frame by frame by pressing the L and R arrow keys), it will not work in the canvas/timeline. It seems to work just fine in the viewer, with any clips that have not been entered into the timeline yet,

  • Certification examination point of view ..usefull table

    Some Infotypes x0027     cost distribution     x1018     cost dstribton 0040     loan     2005     overtime 0050      time recording     2006     absnce quota 0083     leav compn     2007     atndnc quota 0105     communication     2010     E remu in

  • ACS 5.2 Machine Authentication and AD user

    I am trying to setup up a rule to allow wireless access only to users in my AD when they use computers from my AD. I have Machine authentication working on it's own (computer boots up and connects to wireless - confrimed by ACS logs) I have User auth