Adobe Reader X and XI slow when emailing an attachment out of Reader to Outlook 2013 32bit

I have two new Lenovo 64bit computers with 32 bit Outlook 2013.  It takes over 45 seconds for the compose email to pop up when I attach a file or send a file through Adobe Reader (Depending on version).  I've tried the current version of X and XI.  Uninstalled and reinstalled both versions and also the Microsoft Office 2013 package.  It has to be something to do with Reader because other applications attach the email just fine.  I've exhausted my options and I am unable to find anything searching online.  I've found a few older discussions and none of those solutions have worked.  Any help would be great.

Hi all,
I found a workaround the problem I was describing.
Apparently Adobe has implemented something called Protection Mode
for a description see this link :
http://kb2.adobe.com/cps/860/cpsid_86063.html
The workaround (I call it a workaround because you have to disable this new Security measure)
is to do the following: Open Adobe Reader X --> Go to Edit --> Preferences in the menu  --> General --> un-check "Enable Protected Mode at Startup"
Then you will have to click Continue and restart Adobe Reader for the change to take place.
Now this is only a workaround as it disables all of the new Protected Mode security features so please keep that in mind.
Hopefully adobe will address the Outlook integration piece so that the Printing script will be allowed to open and close Adobe like in un-protected mode...
Hope this helps others who have been searching for a workaround...
Kevin.

Similar Messages

  • Communication problem with Adobe 9.0 and HP Printer when I scan

    I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
    Thanks.

    Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0   Had to go to Adobe 6.0
    Date: Thu, 17 Dec 2009 03:19:49 -0700
    From: [email protected]
    To: [email protected]
    Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
    May be that the HP software doesn't support Adobe Reader 9.
    >

  • Adobe Premier pro running very slow when rendering a file

    Adobe Premier pro running very slow when rendering a file

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have Adobe 8 Pro and until recently when i open up a document it closes on its own in 5 secs. Any help with this?

    I have Adobe 8 Pro and until recently when i open up a document it closes on its own in 5 secs. Any help with this?

    What OS? Did it ever work. From what you say, it seems it has never worked. Has it always been on this OS?

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • I have downloaded several books into ibooks.  Started reading one and closed it when I was done reading for the day.  Now I want to access other books and when I open ibooks it goes directly to that first book.  What can I do? Help please.

    I have downloaded several books into ibooks.  Started reading one and closed it when I was done reading for the day.  Now I want to access other books and when I open ibooks it goes directly to that first book.  It does not give me the shelf to choose what book I want to read - goes directly to the first book. What can I do? Help please.

    There should be a Library button on the top left. If not ap the middle of the screen to get it to appear.

  • Still not able to use fire fox, Fire fox works in safe mode but then it will freeze up and run slow when i try to use a link. All my drivers ect are up to date.

    My Fire Fox will only open in xp sp1 but then it will run slow and freeze up when i try to view a link, i have just about given up with this problem as i have tried every thing that might fix this problem.

    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    If this doesnt work, may you please reply and respond with a list of things you have tried.

  • I installed Adobe Reader X and i can't print PDF's without opening Reader first

    Hi, i am using windows XP and i just installed Adobe Reader X onto a workstation within' my office. I use to have Adobe Reader 9 where i could just open a folder with my PDF's. For example, My Documents folder and right click on the PDF i want to print, without opening the file in Adobe Reader first and then clicking print. With Adobe Reader X, i can't do the right click option and print because nothing happens.
    Is they an option in Adobe Reader X i need to turn on or off, to get the function of printing by right clicking on the PDF file without opening Reader X to print please ?

    Is it happening all the times or happened just in the starting when you hadn't accepted EULA?
    Is it still happening after accepting EULA?
    Also, can you please tell what printer exactly are you using?

  • How to have iPhone 4 vibrate and show banner when email is received

    I have an iPhone 4.  I have it set up to vibrate on silent when I receive emails.  The issue is that I am not getting the banner when the email comes in and it is not vibrating on silent.  It only vibrates once I open the phone and go to my email.  At that time it checks for new mail and retrieves the new emails.  What could be the problem?

    After upgrading i06 on iphone 4 and Itunes 11 on pc
    Does anyone know how to solve why the apps sync starts installing apps on the IPhone, blue bar gets to mid point for each app (even 1 app) then hangs i.e. fully clears the blue bar as if it hasn't started. Occurs on cable connection and Wifi sync.
    This then stops you from installing any apps as the hung app shows installing but not doing anything.
    Installing new apps is fine however.
    cheers

  • Why do iPad movies appear upsidedown when emailed as attachment

    Why does film shot on iPad appear upside down when sent as attachment to email open on PC or in iMovie on Mac

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • After upgrading the OS to 10.6.8, my Skype clashes when open and iMail crashes when trying to attach Pages File !?? What happen?

    I just updated my mac book pro to OS 10.6.8 and now my skype crashes after launching and iMail crashes after trying to attached Pages file.
    The OS is very unstable !!! what happen ! this is first time i am experiencing this...so sad
    What can i do now ? How to trouble shoot ?
    thks

    Hi Michael,
    Thanks for your tips. After I run Disc Utility - Repair Permission...restart my machine and still have the same issues. What next step can i do now ?
    Will it be helpful if i send you the Clash reports here ?
    Thanks so much for taking your time to advise.

  • I cannot email attachment directly from Acrobat to Outlook 2013.

    I get the message "there is no default mail client"  But outlook is correctly set as default.  can email from other apps, just not acrobat. I have differnt computers with different systems and each cannot email to outlook.
    Using Acrobat 11 Standard to Outlook 2013 64bit under Win 8.1 Pro 64bit and Acrobat 9 to Outlook 2013 64bit under Win 7 Pro 64bit.  Also, Acrobat 11 to Outlook 2013 64 bit under Win 7 Pro 64 bit. The common element is Outlook 2013, but Microsoft Tech says it is a Adobe issue since other apps work.  Was using Acrobat 9 to Outlook 2003 32bit under Win XP 32bit.
    Is there an issue with 32 bit Acrobat to 64bit Outlook 2013?

    Yes.  I discovered that. So I upgraded Acrobat to v11.0.5 on that computer.  I have 2 computers in my network, both run Win 7 Pro 64bit; Acrobat 11.0.5; Outlook 2013 64bit.  Each computer will not email, returned the message "there is no default mail client". (Each computer has a separate license for Acrobat, Outlook 2013) 
    Edited the registry in 1 computer, it worked. This computer was running Acrobat 11.0.0 at the time of the registry edit.  Acrobat upgraded automatically to v11.0.5 it corrupted the registry files, Outlook would not open until it rejected the Acrobat Add-in "Acrobat PDFMaker Office COM Addin".  This happened in both computers. I then edited the registry in the other computer and it worked.
    Each computer boots up to "there is no default mail client" pop up. Ran repair in both Acrobat and Outlook, didn't work. No issue other than the Addins corrupts Outlook 2013. Each computer has the same issue.  Home computer with Win 8 Pro 64bit, Acrobat 11.0.5, Outlook 2013 64bit, with Addins and registry edit, is working fine. 
    The issue seems to be 32bit Acrobat conflicts with 64bit Outlook 2013. What does the Addin do?

  • I have windows 8.1 and having installed icloud 3.0 cannot view my contacts in Outlook 2013

    I have windows 8.1 and having installed icloud 3.0 cannot view my contacts in Outlook 2013

    This fixed the issue:
    1. sign out of iCloud. (make sure you are really signed out or it won't work!)
    2. open Outlook and make sure iCloud is not listed in Account Settings
    3. close Outlook
    4. sign in to iCloud and let it set up Outlook sync
    You shouldn't need to reinstall anything.  Just remember that when you first look at your calendar/contacts in Outlook it will default to show your Outlook (saved locally) calendar and contacts.  You may need to select iCloud to see them.

  • Problem Signing Email with Digital Certificate from Smart Card, Outlook 2013

    Hi there, I'm the IT guy for a small company.  I've configured several people in the company to use their smart cards for email signing through Outlook 2013, but a a few computers are giving me this error:
    "Microsoft Outlook cannot sign or encrypt this message because there are no certificates which can be used to send from the e-mail address '<e-mail address>'. Either get a new digital ID to use with this account, or use the Accounts button to
    send the message using an account that you have certificates for."
    I've been in the Trust Center, I see the signing and encrypting certificates. (SHA-1 and 3DES).  Yet when I try to sign, Outlook always fails on the error.
    For my computer, I was able to fix this by adding a "SupressNameChecks" DWORD set to 1 in the Registry under HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\15.0\Outlook.  However, this fix is not working for the other people in the company.
    Any other ideas?  Really pulling my hair out on this one, I've tried everything I could find on the net it seems.

    Hi,
    Please checked “E-mail name” under the section ‘Include this information in alternate subject name” on the Subject Name tab of the certificate template.
    We can export the entrust managed services root CA cert from a working machine and import into the trusted root store of a non-working machine. For detailed steps about it, please refer to:
    How To Import and Export Certificates So That You Can Use S/MIME in Outlook Web Access on Multiple Computers
    http://support.microsoft.com/kb/823503/en-us
    Hope it helps.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Advanced table copy and delete slow when done programatically

    I am modifying a line in an advanced table, then copying it and deleting it. What I noticed is that
    it takes a lot less time to copy and delete manually within the application verses doing it programatically.
    To copy or delete 10 lines it takes about 1 or 2 seconds within the form. When I do this programatically
    it can take up to 20 seconds. Does anyone know why it takes so much longer?
    Here is a sample of my code.
              porequisitionlinesvorowimpl.setSelected("Y"); //programatically select line for copy
         ArrayList deletearraylist = null;
         String s1 = porequisitionlinesvorowimpl.getItemNumber();
              java.sql.Connection connection = oadbtransaction.getJdbcConnection();
              //Query values from for child item.
              OraclePreparedStatement oraclepreparedstatement = null;
              ResultSet resultset = null;
              try {oraclepreparedstatement = (OraclePreparedStatement)connection.prepareStatement("SELECT I2.DESCRIPTION WHERE                       I.SEGMENT1 = ?");
                               int i = 1;
                               oraclepreparedstatement.defineColumnType(i++, 12, 240);                                                                 oraclepreparedstatement.setString(1, s1);
                               resultset = oraclepreparedstatement.executeQuery();
                               while(resultset.next())
                                    //Collect values from query for child item.
                                    String desc = resultset.getString(1);
                              porequisitionlinesvorowimpl.setItemDescription(desc);
                              //Copy modified parent to produce a child line.
                              ArrayList copyarraylist = new ArrayList(2);
                               copyarraylist.add("populateAndDuplicate");
                               copyarraylist.add("lines");
                               executeServerCommand(oapagecontext, oaapplicationmodule, "CheckoutLinesSvrCmd", copyarraylist);
                               } //while loop for resultset
              resultset.close();
         oraclepreparedstatement.close();
              catch(SQLException sqlexception) {
                   ErrorUtil.handleFatalException(oadbtransaction, sqlexception, this);
              //Delete original Kit Parent           
              deletearraylist = new ArrayList(2);
              deletearraylist.add("populateAndDeleteReqLines");
              deletearraylist.add("lines");
              executeServerCommand(oapagecontext, oaapplicationmodule, "CheckoutLinesSvrCmd", deletearraylist);

    I timed these too and they appeared to completed very quickly. The only events that took a significant amount of time where the calls to the executeServerCommand when I copied and deleted lines.
    Can the database connection and looping the resultset be slowing these activities down?
    There is no VO existing that generates the query results I am looking for. Do I need to create my own VO?

Maybe you are looking for