Adobe Reader X - Format lost during Control+C, Control+V

I use Adobe Reader X (version 10.1.3.23) to read my manuals in PDF format.
Here is an example of those manuals :
http://www.redbooks.ibm.com/redpapers/pdfs/redp4815.pdf
Whenever i try to copy some code or text from those manuals like the results
of commands on Example 3-16 or Example 3-17 in page 37, the format is
completeted messsed up.
By a simple copy and paste, something that should come this way :
$ lsdev | grep fscsi
fscsi0 Available FC SCSI I/O Controller Protocol Device
fscsi1 Available FC SCSI I/O Controller Protocol Device
comes this way :
$ lsdev | grep fscsi
fscsi0 Available FC SCSI I/O Controller Protocol Device
fscsi1 Available FC SCSI I/O Controller Protocol Device
and then i need to spend a lot of time fixing and formating.
When this is done thru the PDF XCHANGE VIEWER, things works like a charm and
all formatting and spaces and character are preserved but unfortunatelly
my company doesn't allow me to use the PDF XCHANGE VIEWER.
Is there any way to fix the Acrobat Reader X ?
thanks !

No clues about it ????

Similar Messages

Adobe Reader PDF format

I have installed Adobe Reader etc. Whenever I try to open a document in PDF format my computer shuts down..I have tried to remove Reader (to reinstall) but half way through my computer shuts off. It sounds like avirus, however, the only time my computer shuts down is when I'm trying to open a PDF document. Any suggestions would be greatly appreciated.
Thanks
Anita

I'd try to remove Reader. First try to remove reader using the control
panels. If that fails, then try the Microsoft Installer Cleanup tool.
Then try to re-install or better yet install Reader 9.
Mike

Force PDF baggage file to open in Adobe Reader?

Hello, I develop WebHelp using RH10 and have noticed that in my published output, linked PDF baggage files launch in the users' browser window rather than in Adobe Reader. Is this something I can control?
This seems to be the case no matter how I set the options in the Hyperlink Properties dialog (Page Default, New Window. etc).
Thanks,
Mike

http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Display PDF Dokument in HTML control with Adobe Reader X - hide toolbar

Hello,
I am reading a document from a content repository via Archive Link Interface. I get the content by the function module SCMS_HTTP_GET. Afterwards the content will be displayed in a html control in the method SHOW_URL in class
CL_GUI_HTML_VIEWER by calling the url SAPR3://SAPR3CMS/get/012/XX/0050568700A51EE0BDC6F305DFEDDF57/ with the following code.
CALL METHOD call_method
   EXPORTING
     method = 'ShowUrl'
     p_count = 2
     p1      = url
     p2      = frame
   IMPORTING
     RESULT = m_result.
If I had a standard url like http//:...test.pdf it would be possible to hide the Adobe Reader X toolbar by the additional command &#toolbar=0
The SAP url SAPR3://SAPR3CMS/get/012/XX/0050568700A51EE0BDC6F305DFEDDF57/&#toolbar=0 is not working. Can anybody give me a hint how to get the toolbar hidden?
Thanks and regards
Joerg

I don't believe you answered the question. I have the same problem in that when I upgraded to Reader X my Toolbar disappeared and you responded to my post with a fix. Last week I installed updates to both Acrobat 8 and Reader X and in the process lost my toolbar and the floating toolbar. After "repairing" both Reader and Acrobat numerous times I find that at least the floating toolbar is back and F8 will of course deliver the traditional fixed, top of the page toolbar, but only for that specific open document. When I open a new document (from the web) I must F8 to get my traditional toolbar back. Below are the settings I am using to achieve this (I have tried every combination to try and make this work). Any help to get my toolbar back is very much appreciated.

Adobe Reader X (10.1.2) - An error occured during the installation of assembly component

Hi there everyone,
more or less is was forced to format and reset my system by today and one of the first programms i tried to re-install after my WIn 7 64 bit was back in action was Adobe Reader X. Unfortunately the following error occures during the installation (by the web installer and also by the 52MB stand alone installer). Maybe the installer requires some other tools, runtimes or something else to be installed to go on ahead with the adobe installation but I'm not quite sure.
I would be very happy if someone could help me.

The Problem solved itself meanwhile. After installing Windows 7 it was automatically loading the 71 last important updates from the Microsoft site and I didn't restart the system after installing all those updates (~270MB).
After rebooting the system the Adobe Reader installed easily. Thanks for your help dude and your advice "restarting windows" was the right answer anyway. : o)
Kind Regards,
Schnörgel

Lost my windows internet and I can't download Adobe Reader

Hi .Acouple of days ago my computer was kinda draggin so I went to control panel and ran a recovery hoping that it help it.In the process of the recovery I lost my windows internet explorer and right now I'mrunning in the avg.Long story short I 'm working on this project for myself and in order to get to the good part I need to download Adobe Reader plugin ,the installing process goes through but at the end this comes up"install_reader11_en_mssa_aaa_aih(1)_2exe-ordinal not found" And this one pops out too"THE ORDINAL139 COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRAY" What do I have to do to get my windows internet explorer back and to download Adobe Reader???? Thank you Blu

Explorer is a Microsoft, not an Adobe product. You can download it from
http://windows.microsoft.com/en-us/internet-explorer/download-ie
For installing Reader, you may try downloading its full installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.

Need help to print in PDF format using Adobe Reader with FireFox and a FileOpen plug-in. Can't get anything to work.

I am trying to print clothing patterns on my printer and they must be in PDF format. I was told I needed Adobe Reader, a FileOpen plug-in, and finally Firefox Plug-in. I downloaded all of this and I still cannot open anything in PDF format. Thank you Bonita Rainey

call the same smartform(Function generated from smartform) in your bsp application, get the otf outof it, convert that to pdf and show it. follow your previous thread and check the blog mentioned there.

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

Adobe Reader v.9.1 - problem during installation

I've tried to download the free Adobe Reader Version 9.1 on a number of occasions, and I get to the last window with 1 second to go, when an error window appears as follows:
"Error1935. An error occurred during the installation of assembly component. {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x8007371B."
It's a bit frustrating because I can't access any PDF files, as they are displayed on wordpad, ie gobbledegook! Many thanks for any assistance. Can anybody help?

More details to last post.
AdbeRdr910_en_US.exe installs without AIR and Acrobat.com.
Extracted this EXE to get MSI and used Customization Tool to create MST. Deselected AIR in the Customization Tool.
Installing using MSI and MST still results in AIR and Acrobat.com being installed.
Anyone else run into this?

I am not able to convert a pdf file to a xml format using adobe reader 11. please tell me how to do the same!!!

I have to upload a form in xml format. The file is in pdf format. I am using adobe reader 11. Please tell me how to export to xml format. There is no option for xml.

Please give us a link to the instructions you are trying to follow.

Trying to save a Form filled out that came in Adobe Reader format, each time I try and save it says it can only save a blank copy

trying to save a form filled out that came in Adobe reader format, each I try and save it, it says that it can only save a blank format and I lose the data

Is there anything in the document properties that would make it behave that way?

How does one print to a Large Format Network Printer in Adobe Reader X?

I have just installed Adobe Reader X on a machine that previously had Adobe Reader 9 (I had to format the hard drive so this is a fresh installation). When attempting to print to a large format Printer (36x24) across the network I cannot change the paper size. Despite attempting to change the paper size to a number of different configurations Adobe X will not print anything but 8.5"x11.0" (which is the default paper size on the local printer). I have tried making the network printer the default printer and that does not make any difference. Everything worked fine with Adobe Reader 9 but not X. Can anyone offer any suggestions?
Also, I can print to both the local printer and the large format network printer fine through other applications.
Thanks.
Ben

Just finished testing 10.10 printing via a Windows 2008 R2 print share. I also found that when trying to add the printer using CUPS I would get an authentication error. But if I added the printer using the Windows section of the Add printer pane, then I was able to print fine.
So with you mentioning that using the Windows section of the Add printer window has never worked (which is interesting because it's always worked for me) I want to suggest another approach to adding the printer, still using the Add printer window. With this window open you can right-click on the toolbar and select Customize Toolbar. You can then drag the Advanced icon to the toolbar. Then when you select this, you can set the Type menu to "Windows via spoolss" and then enter the URL as smb://servername/sharename. Select the supporting driver and click Add to complete.
Then when you select to print for the first time using this printer you will be prompted to authenticate. Enter the account details, set the save to Keychain option and OK to send the print job.
This worked fine for me and creates the same queue as using the Windows add printer setting. Curious to hear if this gets your co-worker printing again.

How do I get the "auto portrait/landscape" option to show during printing in Adobe Reader Touch

When I print using Adobe Reader Touch, the "auto portrait/landscape" options does not show up. As a result, all pages in a document are printed in the same orientation even if they are not all of the same orientation in the file itself. I don't believe this is a printer issue because if I use Adobe Reader X (v. 10.1.6) on the same computer/printer, the auto option does show up and the documents print as desired. I use Windows 8. As the video quality of Adobe Reader X is extremely blurry in Windows 8, I would like to be able to use Adobe Reader Touch exclusively. How do I get the latter to give me the "auto portrait/landscape" option during printing?
Thank you,
Pelle

Hello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis

Adobe Reader X - Format lost during Control+C, Control+V

Similar Messages

Maybe you are looking for