Adobe reader XI gives error "mail client cannot fulfill the messaging request".

I keep receiving warnings that I need to update Adobe Reader. I currently have the latest version of Adobe Reaxer X (10.1.7). When I click on "Check for Updates" I am told no updates are available.
I have tried installing Adobe Reader XI but, when I launch it, I receive an error message stating that "mail client cannot fulfill the messaging request".
I do not want to use Microsoft Outlook (or any other Mail Client). How do I install Adobe Reader XI without a default Mail Client being required?

Hi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message when you send e-mail from Office 2010 in Outlook

Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi S

Hi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?

Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang

Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run ...

Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can't sync contacts - says mail client cannot fulfill the messaging?????

I'm trying to sync a contacts sub folder in Outlook 2003, but keep getting a message that says "there is no default mail client...etc." I can't even get it to sync calendar or main contacts. I checked Outlook help and I've done everything it says. Any suggestions?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Win 8.1 2010 Outlook Error message: "Either there is no default mail client or the current mail client cannot fulfill..."

When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.

Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

I cannot install adobe reader. I get so far and get the message "Error 1324. The oath All folders or the volume is invalid. Please enter it again" can you help?

i cannot install adobe reader. I get so far and get the message "Error 1324. All folders or the volume is invalid. Please enter it again" can you help?

We need to know if any registry settings are causing this error. Please follow these instructions:
from Windows Start | Search: type regedit and hit Enter; you will see a window like this
now click on the little arrow ▹ left from HKEY_CURRENT_USER
Next click the arrow ▹ beside Software, then Microsoft, then Windows, then CurrentVersion, then Explorer, then click on User Shell Folders
all entries on the right side should start with %USERPROFILE%
If you have anything different, this may be the cause for the install failure.
Now you need to repeat the same thing for another key:
▹ HKEY_LOCAL_MACHINE ▹ Software ▹ Microsoft ▹ Windows ▹ CurrentVersion ▹ Explorer ▹ User Shell Folders
Here all entries should start with %PUBLIC% or %ProgramData%. If you have anything different, this may also be the cause for the install failure.

Adobe Reader 11.0.6 for Maverick cannot open the pdfs it has just created.

Why will Adobe Reader 11.0.6 for Maverick cannot open the pdfs it has just created.

Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
[user]/Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the Reader folder (the whole folder)
Empty the Trash.
Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Quit your browser and reinstall Reader.
Launch it from the Applications folder and accept the license agreement.
You should have no problems downloading PDFs with Safari.
Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them.

Adobe Reader 9.2- makes documents black- cannot view the PDF's content

Hi all
Hoping someone else has seen this very wierd issue.
I have a Terminal Server running Server 2003 SP1. (inherited)
The End Users were experiencing issues with Reader not printing out correctly. They were previously using Reader v7.0.
I downloaded the latest version v9.2 off the Adobe website and it installed correctly.
The v9.2 installation has solved all the previous printing issues but has now created a new problem.
It is not every time but very regularly, if the users are opening PDF's on the Terminal Server, the content is blacked out and they cannot see the text.
It is like someone has taken a black marker and removed the text- SEE ATTACHED screenshots (it's like they do for Top Secret documents LOL)
I have checked that Reader has no updates available, I called Technical Support and they don't support Reader over the phone and directed me here.
I am going to re-install using the .exe off the FTP tonight but not hopeful that this will solve this problem.
Thanks in advance.

Hi,
I am successfully able to view PDF files on my Vista OS, without any black spots or any other obfuscating marks.
You should try to uninstall and then reinstall your Reader 9.2 from http://get.adobe.com/reader/.
If the problem persists, then you need to check any other installed software on your system, that's causing you problems because Adobe Reader's is an application to view PDF files, it does not creates any.

Because I have deleted photos, Iphoto gives error that it cannot find the photos

Because I have deleted photos in my albums, Iphoto gives an error for each file saying it cannot find the file. Is there a way to stop it from looking for deleted pics?

Are you running a "referenced" library?
If you are did you delete the source photo via the Finder and not from in iPhoto? It sounds as if you did. If that's the case then drag the thumbnail to the Apple Trash Bin and empty it. That will stop the error message.
If you're running a managed library and deleted the original file via the Finder that's the reason. The same fix applies.
WARNING: Never delete a photo that's in the iPhoto library via the Finder. That damages/corrupts the library as you've experienced.
OT

When I download a .pdf file using mozilla, I cannot open that file despite having adobe reader on my desktop. I cannot save the file to open at a later time

I wished to view a .pdf file of a vehicle brochure. Mozilla found the brochure ok, but would not let me view it or save it. I ended up having to use IE to download and then view the file. How do I enable Mozilla to allow me to view .pdf files< I have Adobe Reader 9 installed on my PC (using Dell and Window 7)

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

Either there is no default mail client or the current mail client cannot .....

Windows7 Ultimate 64 bits, Office 2013 32 bits.
My issue is that running Outlook 2013 I get the message
Either there is no default mail client or the current mail client cannot fulfil the message request. Please run Microsoft Office Outlook and set it as the default mail client.
OK, so this should be straight forward:
I set outlook at the default mail client and associate all file with it from Outlook\File\Option. Nope. That does not work.
I go through default programs and set the default mail client as Office 2013 and associate all file with it from Outlook.   Nope. That does not work.
I check the registry and it shows that the 64 bit or 32 bit reversion is the default mail client. So that does not help.
I install the 64 bit version instead of the 32 bit version. Nope. That does not work.
I clean the registry and temp file. Nope. That does not work.
I tried: Uninstalled with the Microsoft
fix uninstall and reinstall. This does not work.
Contact the phone technical support. This
does not work.
Addin,s does not work. Adobe, iCloud Addin .... does not work.
'Send email to'   menu does not work.
No application communicates with
Outlook, no Microsoft or third apps.
I can only send and receive emails
from within Outlook.
This program is lousy, any
possibility that my money back.
Thanks
Has anyone got any ideas?   All the suggested fixes on this forum do not fix this issue.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Adobe Download Assistant gives error after finishing downloading, why?

I have downloaded the trial version of CS5.5 Master Collection twice. But when the download is completed Adobe Download Assistant gives Error and cannot install the software. I go check in the download folder and there's nothing there. My laptop haas ample available storage space (478 GB), running Windows 7 Home Edition, 64-bit.
I tried with smaller file (Photoshop CS5.1 Trial), same story.
Can someone please give me direct download links for following trial softwares:
1. Photoshop CS5.1 Trial
2. CS5.5 Master Collection
Thanks
Malila

This site shows how you can do a direct download: http://prodesigntools.com/tag/ddl
Note that you have to follow their instructions carefully and exactly.
By the way, the word "software" is not pluralized by adding an 's' on the end. Thus "softwares" is incorrect usage. Just say "software" or "software packages" instead.
-Noel

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

Colegio Oswald please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 205.

Adobe reader XI gives error "mail client cannot fulfill the messaging request".

Similar Messages

Maybe you are looking for