Adobe ReaderX will only print in landscape

I updated to adobereaderX (free version) in the last few days. Now all my pdf documents will only print in "landscape".
Word docs are not affected.
On checking, my Brother printer seems to be working fine and the printer orientation settings are correct (ie set to portraite).
How can I fix this?
Brother suggested I remove adobe reader and reinstal.

Are these documents created in landscape or portrait format?
What is your Reader/Print setting for landscape/portrait?

Similar Messages

Documents only print in landscape mode even when portrait is designated. How do I fix this?

Documents will only print in landscape mode when portrait is disignated

How about changing the printer and printing something, then close Firefox and then restart your operating system? See if that helps ....
I am curious why you need two separate versions of the same printer installed. Is one used on a USB connection and the other part of a network configuration or wireless? If both are network or wireless, are they using a different IP address on the network they are on?
The only time I have seen a similar problem with Firefox not wanting to default to the "last used" printer was with a USB inkjet and a network connected laserjet (Brother) - the laserjet would go to "sleep" (energy saving mode) and Firefox would switch to the inkjet every time the laserjet was asleep. That problem was eventually solved when the USB inkjet was replaced by a "network" connected inkjet - still can't understand why that made the difference, though.

Firfox will only print 1 page no matter what selection chosen

No matter what print range is chosen (all, or multiple pages), Firefox will only print the 1 page. This does not occurr with IE

Please repost your message at this link:
<http://forums.adobe.com/community/coldfusion>
Your question is very specific about CF and not DW.
hth

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Appleworks will only print one page at a time, please help!

hi there ~
no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
Could this be because the pages are arranged left to right? that would seem strange.
also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
THANKS SO MUCH!

Hi td,
Welcome to AppleDiscussions and the AppleWorks forum.
"no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
My memory says the same as Yvan's.
If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
regards,
Barry

My printer is Hp printer 932C it will only print in black and white not color

my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

There are a few things to check:
Make sure the blue tape has been removed from the nozzle plate.
Print a diagnostic page as shown in method 4 here. Does this page print color? If so the issue may be your driver settings. Check for a "Print in grayscale" setting and uncheck this box.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

CS5: will only print in black and white after upgrading to yosemite. I have updated all drivers and cs5. Still prints in bw/greyscale even when picture is color. Advice?

Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!

Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw. I can print in color from Word but not photoshop. I have updated all drivers and cs5. Any suggestions would be appreciated. Thank you!

Designjet T520 will only print one page.

Hi, Brand new Windows 8 HP PC printing to a Designjet T520, will only print one page.I have met this problem on laserjets in the past and resolved it by enabling/disabling mopier mode.However none of the drivers I have tried (many) for the Designjet T520 have the option to turn on or off Mopier Mode. After many hours spent troubleshooting, I formatted and installed the Windows 8 machine again from scratch.Even with this brand new install on a bran new PC, I still cannot print multiple copies to the designjet. In the same office, 3 other Windows 8 machines are printing fine to the same plotter and can print mutliple copies. The driver versions are the same on all machines. Hope someone can help.Thanks.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.

I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

Select a document, CMD+P, and set the color options as shown here:

Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
A couple of thoughts:
(1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
(2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
(3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
(4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

PRINTING: Keynote will only print to a certain page # then stops

Just to get this out of the way: iWork '08/Keynote 4.0, Mac OS 10.4.10 and everything has been updated. I also looked for other strings relating but could not find any.
I have a few reports created in Keynote that will only print to a certain page. Each report prints the same page every time, but the page # differs for each report. For instance, one report will print to page 32 out of 64, another to 42 out of 70, etc...
Further, if I select the pages that were missing, they will not print at all.
I have tried different printers, networks and printers. Other programs (Word/Excel) will print in total.
Has anyone heard of this problem/have any advice?
Much thanks,
Matt

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Printer will only print from computer won't copy from printer

My printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected.

Hi @sandylouise,
Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi

My document will only print using wireless once I log off windows.

I recently purchased the HP officejet wireless 4500 printer. I am able to send documents to print, but then get an error message. They will only print once I log off windows. PLEASE HELP!

Terry101
Welcome to the HP Community Forum.
To a large extent, the difficultly can be related to the type of document you are trying to print -- and the application you are using to print that document.
PDF documents can be tricky -- sometimes, especially if you are trying to print these from the Internet, PDF files can be stupid-hard to print because the format is messed up.
You can take a look at the following - no garantees -- it might help you find something that will help nail down what is going wrong or maybe help you figure out a way to get what you need. For example, if all else fails, you can perhaps take a Snip of the document on the screen, save the Image, and print that. It is a sorry excuse for a workaround - but at least you end up with something on paper.
Manage Print Output with Print Preview
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I have a Photosmart 6510e that will only print after I shut printer off and then restart..

After setting up my 6510e photosmart all computers are able to print ---laptop, netbook and my iPhone can eprint. However, my desktop PC will only print once the printer sleeps (white light is dim) after I completely shut off the printer and then restart it. I have updated drivers and software. The message comes up "Unable to Communicate with Printer."

I have the same problem - I bought the 6510 printer yesterday and it seemed to connect wirelessly to my PC and shows as the default printer ok but when I try to print I get the message 'unable to communicate wirh printer'. I troubleshoot and am advised to switch on printer (it is already on) but when I switch it off and then on again the printing starts Ok. Very annoying and not what I had hoped for.....

Adobe ReaderX will only print in landscape

Similar Messages

Maybe you are looking for