Adobe RoboHelp 7 does not recognize FrameMaker 6
I am trying to create webhelp. It's my intention to use
webhelp generated by RH7 as my single source output to webhelp,
Word, PDFs, and my company's wiki.
I tried to import FrameMaker 6 files into RH7 for HTML and
saw the message that FrameMaker is not installed. I don't have the
latest FM, but FrameMaker 6 is installed. So I converted my files
to mif and then to RTF and then to MS Word doc and imported them as
Word docs.
I was very disappointed. This means I will have to do a lot
of work to rebuild my TOCs, glossary, and index.
Also, the conversion from FM to Word changed my automatic
numbering to hard-coded and RH7 complied by applying a hardcoded
number paragraph style in HTML. I am still new to HTML. Also, I
converted files from my predecessor who inserted anchored frames
for graphics in table cells in FM. So I got heavily styled HTML
code in RH7 which made correcting the HTML code difficult.
So I edited the ancient FM files and re-edited the Word files
to create automatic numbering before replacing the topics in RH7. I
still had to go into RH7 and replace the numbered paragraphs with
the usual <ol> and <li> tags.
In another project, I had to fix the grouping of the
<ol> and <li> tags by hand. By itself, RH7 broke up the
sequential numbering.
I fear I also have to recreate all the index markings. This
is a feature in RH7 I still have to master. I have to re-build
cross-references internal to a topic.
Why couldn't Adobe enable the reading of all FM versions in
RH7?
More immediately, how can I cross-reference a list number
generated in HTML instead of the text or an alias, like "Step 6?"
:brokenheart;
Sofia Pokrzywa wrote:
Neither Bridge CS6 or Lightroom 5.7 can recognize Canon's raw file (Canon Camera 60D).
This only started a few months ago without any change that I made to the system
Any clues?
Is this only when reading CR2 files on the camera memory card or also for CR2 files that were previously imported to your hard drive (i.e. ALL of your 60D CR2 files)?
LR 5.7.1 is only at Camera Raw 8.7. so OK. What Bridge, PS, and OS versions are installed? In Bridge go to Help> About Bridge
From inside Bridge launch any raw file and check the ACR version:
From inside PS go to Help> System Info and check PS and OS version:
Similar Messages
-
Installed latest Adobe Flash - Incredimail does not recognize!
Installed latest Adobe Flash - Incredimail does not recognize!
Can you see the Flash animation at http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html ?
If so, what version do you have installed.
Also tell us your operating system and browser.
[topic moved to Flash Player forum] -
RoboHelp does not recognize FrameMaker document
I'm attempting to import a FrameMaker (version 8.0p266) document into RoboHelp HTML (version 7.00.145) and the following message appears:
"Cannot import (filename). Make sure this is a valid FrameMaker document."
It is a valid FrameMaker document that I have been working on in FrameMaker. It has quite a few embedded graphics and conditional text, so the document size is rather large (108, 598 KB), but other than that, there's nothing that I could see that would cause the import to fail. Any help would be greatly appreciated.
TomHi,
img (
border: 1px solid # 006699 !important;
margin-left: 40px;
will overwrite Robo's inline styling.
Greet,
Willam -
Adobe Extension Manager does not recognize me as a Creative Cloud Member.
I'm unable to activate several new extensions, particularly 2 of the paper textures. Adobe Extension Manager says I have to be a Creative Cloud member. I am. And I"m logged in.
Hi KylieSabra,
Did you acquire your extensions from Adobe Exchange? If yes, when the extension is to be installed, Extension Manager will check if the current user has purchased this extension( for paid extensions ). Then Adobe Application Manager might pop up to let the user input his accout --- adobe id, which is what you got.
Thanks,
Xiaoyi -
I have an Azerty keyboard, and the Illustrator CC defaults to Qwerty.
jpbattaille,
This may be one for Creative Cloud support (all Creative Cloud customer service issues),
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
Adobe Reader XI, does not recognize installed printer
After I installed Adobe XI 11.0 on my PC I can no longer print pdf files, I get the error "Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer." I can print on the installed printer using any other software (i.e. Word, internet explore, etc.).I have a second computer with the same Adobe reader XI and it prints pdf files to printer with no problem. I have disabled Preference "Enable Enhanced Security. I have uninstalled and re-installed both Adobe and the printer.
Hi Daniel,
What is the make of the printer and is it using PCL or PS driver.?
Do you have Acrobat installed on this machine as well?
Please check if 'Print Spooler' service is running on the machine.
Regards,
Rave -
Robohelp does not recognize border css
My .css is with the following configuration:
img (
border: 1px solid # 006699;
margin-left: 40px;
When I insert an image in Robohelp it does not recognize
the border .css, the code is as follows:
<img src="../../car.png" alt="" width="16" height="16" border="0" />
if I remove all the properties:
<img src="../../car.png">
the border appears. But then inserts Robohelp these properties
again.
There is a solution for this?Hi,
img (
border: 1px solid # 006699 !important;
margin-left: 40px;
will overwrite Robo's inline styling.
Greet,
Willam -
Adobe Photoshop Elements does not recognize printer..error message says you must install printer. Other software does print documents.
Try opening an image in full edit, then press crtl+p
Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.
-
Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first. -
I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files. For instance, when trying to open a PDF file with the name
filename10.5.11.pdf in Adobe Reader, the web browser will not open the PDF and the display is blank. When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.The version is Adobe Reader 10.1.0 I will request the latest version
and let you know if that fixes the problem
Actually I had changed the name of the file so our associates could access
the file (changed the . to a hyphen) It still made me wonder why Reader
wouldn't open it at that time.
Thanks again for you assistance and I will let you know if this resolves
the issue.
Regards,
Susan
From: Ankit_Jain <[email protected]>
To: SusanPleso <[email protected]>
Date: 10/19/2011 12:56 AM
Subject: Adobe Reader does not recognize file name
(filename10.5.11.pdf) but does in Adobe Standard 9. Why?
Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
does in Adobe Standard 9. Why?
created by Ankit_Jain in Adobe Reader - View the full discussion
Hi Susan,
Thanks for providing the information.
Could you also let me know what is the exact version of Adobe Reader on
your system. You can check the same y clicking on Help > About Adobe
Reader X.
In case its not 10.1.1, please try updating to the latest version and see
if the problem persists.
Also, does any other PDF with a different filename open in Internet
Explorer correctly?
Thanks
Ankit
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3979020#3979020]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?
Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium -
I have a form created in Adobe Live Cycle Designer ES4 with extended rights leveraged in Acrobat Pro 11. The form uses an array to store a number of e-mail addresses. When a user selects a name in another field the e-mail address is ‘subtracted’ from the array and the e-mail is created so that it is sent ‘To’ that individual and cc’d to the remainder of the e-mail addresses in the array. The array format is var ListAddr = new Array("[email protected]", "[email protected]", [email protected])
The whole thing works very well so long as Adobe Reader 11 is used: e-mail addresses appear in Outlook with a semi-colon between the addresses. The e-mail clients used by those completing the form are either Outlook 2007 or Outlook 2010.
Eventually users will migrate to Adobe Reader DC so I have been testing the form in Reader DC in advance and am met with the message:
“Microsoft Office Outlook does not recognize “,”…”
A Google search revealed that this issue can be rectified by going to Outlook Tools -> Options -> Preferences -> E-mail options -> Advanced e-mail options and checking the box for “Allow comma as address separator”. Unfortunately doing this makes no difference. The message still appears.
This tends to point the finger at Acrobat Reader DC. Has something changed in how Reader DC handles JavaScript? Do I need Acrobat DC rather than Acrobat Pro 11 to keep my form working? Has anyone any ideas why this might happen?The problem only appears in versions newer than 9. It should definately be something that you could configure your way out of in the trust center, but I have tried "everything" and I am afraid it is not possible.
Anybody who has a solution for this? -
Adobe acrobat pro 8 does not recognize scanner
adobe acrobat pro 8 does not recognize scanner
This question will probably get responses most quickly if posted in Adobe's own forums, since it's about an Adobe product and not the iMac itself.
http://forums.adobe.com/community/acrobat
Regards. -
Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.
I was able to register it though.Not a surprise. The Acrobat 8 product family passed into End of Support back in 2011.
Be well... -
Adobe Reader 10.1.3 does not recognize the windows vista installed printer
I am using the latest version of Adobe Reader. When I print I get a message box that says you must install a printer driver. I have a printer installed in Windows Vista Home Premium that works ok with all other programs. Any ideas?
All updates applied to ver 10.1.10. Same problem - does not recognize the network printer. When I first installed this version and the Software License Agreement displayed it allowed me to access the printer dialog and print the form. When I open a pdf document after this it does not recognize that there isa printer installed. Any ideas??? This is getting vdery frustating. The only good news is that foxit works.
Maybe you are looking for
-
Dear All, I am getting an Error " No GL error" in the sales order while saving the order. What can be the reason for the same because as far as i know GL is determined at Invoice. So please guide.... Thanks in advance....
-
What is my Skype number for freinds to call?
Hi there, I have bought some skype credits for unlimited calling but the number that shows up when i call someone starts with 000 so when someone tries to call that number back to talk to me it takes them straight to and operator since it starts with
-
Sometimes itunes does not play songs
From time to time my itunes stops playing: When I select a song in my library or a song in the itunes store, the song is displayed at the top, but itunes does not start playing. Additionally, it won't play any other song. When I close the itunes soft
-
Autoplay - - not showing up in iTunes
Ok so this only recently started happening. This is what happens: I connect my iPod to the USB port The do not disconnect screen comes up If iTunes is already open, it will temporarily freeze up Then, Autoplay comes up, but doesn't do anything but tr
-
How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?