Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Similar Messages

Phone does not sync w/exchange. When is this going to get fixed? My smart phone is now a dumb phone?

The iphone does not sync with exchange even after apple says the new upgrade addresses calendar issues. When is this going to be fixed? My smart phone is now dumb?
<Edited by Host>

Sorry, quite right. My note was not helpful, just plain frustrated. the sync does not hold. So the phone keeps trying to establish the synchronization. Thus, it zero's out the emails and intermittently does not hold the calendar, the phone shows the calendar unchecked. When you manually recheck the calendar it begins to sync. There was quite a lot of blogging about the issues of exchange and the iphone. Also contacts will revert to telphone numbers only with the name of the individuals disappearing. After sync is restablished everything looks normal and then when it losses synchronicity, it starts all over again. It is happening as I type. There were a nbr of user suggestions about how to maintain stablility with synchronicity. However, none of the issues resolved the matter. I have spoken with my IT department. What settings do you have for exchange....what version of exchange. I also heard the apple dismissed its chief overseeing this aspect of the iphone 5 because of the issues.
Apple is very unhelpful....

I can not access web based e-mail work account - no problems with ff3.6 when is this going to be looked at i see lots of issues like this highlighted in forum

e-mail program used is windows outlook web

Firefox 4 works with the Outlook Web App generated by Exchange Server 2010. At least in my limited testing; I use my phone more than OWA.
Do you know which version of Exchange Server you're accessing?

After upgrading to mountain lion aperture 3.3 no longer recognizes DNG files. Is this going to get fixed?

After upgrading to aperture 3.3 on mountain lion aperture no longer recognizes DNG files.
I have many DNG files already in my library. Aperture shows the thumbnail and will briefly flash what I think is the preview of the file but quickly changes to a gray triangle saying "unsupported image format". After which the thumbnail is replaced with an all black thumbnail.
Needless to say this is extremely disconcerting. I am concerned that aperture is not only refusing to display the existing DNG files but is also simultaneously corrupting the library and destroying my existing images.
fwiw, these DNG files were generated with a leica.
I have not attempted to import DNG images into my aperture library but I assume that would not go well.

Susan,
if it is the native raw format, that no longer is recognized, then try, if registering the CoreTypes.bundle with the OS again will help. This will tell MacOS which raw format types (and other media types) are supported.
Open a Terminal window and paste following line into the window, hit return. This is one very long line:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Léonie
P.S: Some browsers cause a blank to be inserted between /Frameworks/LaunchSe rvices.framework/Versions
But it is "LaunchServices.framework", without blank. All in one line - the only blanks are needed between "lsregister" and "-R" and after "-R" .

No mail since over 36 hours, when is this going to be fixed???

My family and I haven't been able to use mail in the last 36 hours. The status message on Apple support site remains the same, when is this going to be fixed?

So Firefox is leaving you in "the lurch" because you installed a POS toolbar which is supported by freecause.com which doesn't have its' act together enough to make sure that their security certificate is up-to-date??
Firefox is doing its' job by alerting you to the out-of-date certificate! You need to figure out what extension you have installed which is causing that message, and disable that extension until the certificate is replaced by a current certificate.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Problem with uploading files to SharePoint 2013 in cloud using web services. Keep getting error message and don't know why.

Hello everyone. I am having trouble writing a utility that uses SharePoint web services to upload a file and metatag it. It keeps throwing the following error message:
"The request failed with the error message: -- <html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/_forms/default.aspx?ReturnUrl=%2fsites%2fgk%2f_vti_bin%2fcopy.asmx">here</a>.</h2>
</body></html> --."
Not sure why. I pass the file that I am going to upload to the subroutine and it is suppose to upload it to the appropriate library. I have burned several days on this problem and I am not sure what is going on. I would appreciate anyone that can point me in
the right direction. Below is the subroutine that I have that is causing the problem. Obviously, I have stripped the name from the example.
Thanks
Mike
******** <Begin snip of code> **********************
Public Shared Sub CreateNewDocumentWithCopyService(ByVal fileName As String)
Dim c As New copyservice.Copy
c.PreAuthenticate = True
c.Credentials = New System.Net.NetworkCredential("[email protected]", "mypassword")
c.Url = "https://x.sharepoint.com/sites/gk/_vti_bin/copy.asmx"
Dim myBinary As Byte() = System.IO.File.ReadAllBytes(fileName)
Dim destination As String = "https://x.sharepoint.com/sites/gk/Gatekeeper%20Reference/" & System.IO.Path.GetFileName(fileName)
Dim destinationUrl As String() = {destination}
Dim info1 As New copyservice.FieldInformation
info1.DisplayName = "Title"
info1.InternalName = "Title"
info1.Type = copyservice.FieldType.Text
info1.Value = "new title"
Dim info2 As New copyservice.FieldInformation
info2.DisplayName = "Modified By"
info2.InternalName = "Editor"
info2.Type = copyservice.FieldType.User
info2.Value = "-1;#servername\\testmoss"
Dim info As copyservice.FieldInformation() = {info1, info2}
Dim resultTest As New copyservice.CopyResult
Dim result As copyservice.CopyResult() = {resultTest}
Try
' When creating new content use the same URL in the SourceURI as in the Destination URL argument
c.CopyIntoItems(destination, destinationUrl, info, myBinary, result)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
******** <End snip of code> **********************

Hi,
If you want to upload a file to a library in SharePoint 2013 online, I suggest you use Client Object Model or REST API.
The code snippets in the two threads below will be helpful:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/deac7cb7-c677-47b0-acdc-c56b32dfaac8/uploading-bigger-files-using-csom
http://stackoverflow.com/questions/17057074/how-to-download-upload-files-from-to-sharepoint-2013-using-csom
Uploading Files Using the REST API
http://blogs.msdn.com/b/uksharepoint/archive/2013/04/20/uploading-files-using-the-rest-api-and-client-side-techniques.aspx
You can handle the authentication with
SharePointOnlineCredentials object:
http://www.vrdmn.com/2013/01/authenticating-net-client-object-model.html
Best regards
Patrick Liang
TechNet Community Support

Problems with uploading file to database using FND_GFM

Hi
I'm having some problems uploading files to the database in apps 11.5.9
As various sources/documents tell me, using the standard FND_GFM / FND_FILE_UPLOAD packages of APPS should transfer an uploaded file into the FND_LOBS table, but some reason it doesn't work. I copied and altered the FND_GFM.upload_confirm function to try and figure out why it doesn;t work and it looks like the file to be uploaded does not appear in the defined table (FND_LOBS_DOCUMENT).
The following DAD is defined (with hidden password and servername to prevent abuse ;)):
[DAD_oes_s]
connect_string = oes_s
password = ****
username = APPS
default_page = fnd_web.ping
document_table = APPS.fnd_lobs_document
document_path = docs
document_proc =
upload_as_long_raw =
upload_as_blob = *
reuse = Yes
connmax = 10
pathalias = fndgfm
pathaliasproc = fnd_gfm.dispatch
enablesso = No
cgi_env_list=SERVER_NAME=***,REQUEST_PROTOCOL=http,SERVER_P
ORT=***,HOST=***
input_filtering = Yes
stateful=STATELESS_RESET
And I'm using the following code to generate the upload-file page
CREATE OR REPLACE PROCEDURE XX_ITRIS_HelloWorld AS--(file IN VARCHAR2) AS
     access_id_v varchar2(1000);
     BEGIN
          htp.htmlOpen;
          htp.bodyOpen;
          htp.formOpen('http://***/pls/oes_s/fnd_file_upload.uploadcompletemessage', 'GET', null, 'multipart/form-data');
          htp.formFile('file');
          access_id_v := fnd_gfm.authorize(null);
          htp.formHidden('access_id', access_id_v);
          htp.formSubmit();
          htp.formClose;
          htp.line;
          htp.bodyClose;
          htp.htmlClose;
     END XX_ITRIS_HelloWorld;
Can anybody point out what is going wrong?

You said you are uploading XML file whereas in the TSQL you have assign as text file i.e @SourceFile = 'test.txt'. Are you sure that you are copying XML file ? What is the size of the source file "test.txt" ? I am sure it is 0 KB. That is what you
have found in FTP site.
Regards, RSingh

Problem with uploading files in 11g

I upgraded the pre-installed APEX 3.0 in Oracle 11g to version 3.2. I created a form to upload files to the table htmldb_application_files and then copy the transaction to my custom table. However, after I "saved" the transaction, nothing happened. No file was uploaded into the htmldb_application_files table. Also, the "save" process took a while to finish.
I used to do this in my other applications in Oracle 10g and everything worked fine. Is it an issue with Oracle 11g?
Thanks.
Andy

I think I just did something wrong myself. I was finally able to upload the file. However, I wrote the following procedure in my package but wasn't able to download the file from the report. Do I need to grant any privilege from the system user?
Also, does anyone know how to convert a BLOB table into 11g Securefiles table?
Thanks.
<pre>
procedure download_birth_cert(p_vrds_birth_cert_pk in number) is
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(4000);
Lob_loc BLOB;
begin
select mime_type, blob_content, file_name, dbms_lob.getlength(blob_content)
into v_mime, lob_loc, v_file_name, v_length
from vrds_birth_cert
where vrds_birth_cert_pk = p_vrds_birth_cert_pk;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header(nvl(v_mime,'application/octet'), FALSE);
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the user does a save as
htp.p('Content-Disposition: attachment; filename="'||substr(v_file_name,instr(v_file_name,'/')+1)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
exception
when others then
null;
end download_birth_cert;
</pre>

Problem with uploading files with DMR (rights management) included in them to a Zen Visio

Hi,
I though I had got this fixed but nope still having problems so hope you clever people can help me out.
I have the ZVM and it is great, I have been able to transfer movies, CD's, photos all with no problem with a music track taking approx 2-3 seconds. However when using music files with DMR (those from HMV's music rental - this is the reason I bought the player) have big problems in transferring. I have been in touch with the tech guys at HMV and they took me through a firmware upg, re-installation of the Creative software updating the licenses in the music files and then lastly a format. Just after the format it looked as if everything was working fine however things started to slow down and now I am struggling to get tracks over. Again this is only those with DMR and all normal files (music, video, photo) go on fine. I only have 4Gb used so I can't see it is down to that.
Are there any other things I can look at doing or is the player useless for the reason I bought it's
Thanks,
Mark

Thanks Jason that seems to have helped a bit. I can now transfer using the Creative M Series Media Explorer software but not with Windows Media Player. Also when I try to use the Creative Sync Manager it is crashing out every time. My concern is that without the latter working how will I easily get the files on the ZVM updated so that the DRM does not stop the files playing (also I would just like everything working properly!!). Any further suggestions?

Is anybody having problem with uploading files after Os X 10.9.3 update ?

I can't upload files from my computer or dropbox using interface/online plateform because my files appeared grey/inactive, can't press the "chose" or "open"

Hey Guys,
After recent SMC+EFI update on Macbook Air (Mid 2013) OSX v10.9.3, my internal audio device disappeared,
I tried everything I could find in google with no luck. (NPRAM+SMC reset, reloading kents etc.)
THIS IS WHAT SOLVED THE PROBLEM FOR ME:
1. I opened /System/Library/Extensions folder, there I found besides the usual AppleHDA.kext, also an AppleHDA.kext.disabled one.
2. I switched between them (swapped their names, sometimes you'll have to do it from the "get info" menu to take effect)
-- if you don't have this AppleHDA.kext.disabled one, try searching for one lil older than yours in the internet
3. then I unloaded and reloaded the kent dir again-
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
And voila!
Hope it helps someone, as I spent hours until getting this to work again

Problem with CSS files when placed in multiple locations.

Hi,
In our application we have a folder structure for the code files. Folder structure looks something like the one shown below:
ABC
---Scripts
---Stylesheets
DEF
Scripts
Stylesheets
Common
---Scripts
---Stylesheets
The problem is, if we create a CSS file and place it in its module specific folder (Eg: ABC) to which it belongs to and call the CSS on a page, then the styles are not getting applied to the page. But if we move the stylesheet to the Common folder, then page renders properly. In common folder, we already have a common CSS which is used across the project.
Facing similar problem with module specific and common js files.
We have to move all the module specific files to the module folders and all the common files to be placed in the Common folder.
MII Version: 11.5
Please help!
Regards,
Rajesh.

Rajesh,
Also note that, If your html is referencing to multiple css files then the last referenced CSS file style classes will override all the style class having same names in the previous css files.
for example,
say CSS1 has
.bodycolor
background-color:yellow;
.button
color:red;
h1
font-size:50pt;
and CSS2 has
.bodycolor
background-color:red;
.button
color:yellow;
And your HTML is,
<html>
<head>
<link rel="stylesheet" type="text/css" href="css1.css"/>
<link rel="stylesheet" type="text/css" href="css2.css"/>
<title>CSS Test</title>
</head>
<body class="bodycolor">
<h1>Hello World</h1>
<input type="button" class="button" name="B1" id="B1" value=" Click " size="50">
</body>
</html>
In this case the classes "bodycolor" and "button" will be overridden by css2 file but h1 will be taken from css1
Hope this helps!!
Regards,
Adarsh

Problem with upload file

Hi experts,
I try to upload file - and i got error message:
Property "data" of element file_up must be bound.
what is it mean???
what can i do to solve it?
thanks in advanced.
Michal.

Hi,
create an attribute(say ca_fileupload) of type XSTRING under context and bind that attribute with the data property.
For binding the attribute just Click on the element file_up , there you can see data property,click on that and you can see all the nodes and attributes you have created and there click on the attribute(ca_fileupload).

Problems with uploading files, lumia 920!

Hello,
I'm having trouble uploading files in internet explorers browser.
if I come to a website with a browse button , you can not explore the phone's contents. The Browswe button is gray marked
I have tried on several different websites. For example, image upload pages.
Is this a bug or just something missing in lumias interface.
/ with kind regards

this is a limitation of the mobile device OS. even if in the settings you select desktop version, you still cannot attache a file from your mobile device to website. :/
for us symbian and maemo/meego users, this is a hinderance.
i have not tried the UC Browser scoobyman suggested. that may work.
be sure to report back if you can or cannot get it to work.

Your embarresed and I am tired of it, so when is it going to get fixed!

CRASHES,breaks in connection, pain in the butt, quit the apologizes and get it fixed. I am thinking of going some where else. You don't need more info. you know what is wrong so fix it, NOW>

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Just this past week, I noticed that Firefox is not keeping my passwords. This is MADDENING. I'm on a Mac, but it seems many are having this issue. I don't see a solution given for this. WHEN IS THIS GOING TO BE FIXED??? I like FF the way is USED to be!

It seems Firefox has stopped retaining passwords. This happens with all of my accounts. I must fill in the password manually.
This password issue is not computer specific either. It happens on my G5 as well.
What's going on???

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Adobe Send - Problem with uploading files. When is this going to get fixed?

Similar Messages

Maybe you are looking for