Adobe Send Still Has Problems! Fails At End of Status Bar

Sending a video file 400 MB in size. I waited for the long status bar to reach the end - and when it finally did, it failed. Wasted a chunk of time. I reported this a while back and you guys said you were working on this. In the meantime, I still use SendNow. Please please do not discontinue SendNow.
Also, is there any chance that your website can 'remember' me? Every time I log in, there is a checkbox asking if I would like to be remembered. But it doesn't seem to function.
In SendNow, the application memorized email addresses from previous sends. It made sending files a lot less tedious. But Adobe Send does not have that capability - Are we going backwards here?

Hi again,
Would you mind testing your upload speed by going to testmy.net and running their tests?
I just uploaded a 150 MB file to cloud.acrobat.com in less than 1.5 minutes, and testmy.net reported that my upload speed is 7.9 Mbps (1 MB/s).
Yes, you should be able to do the upload/send operation in one action; I was asking you to separate them so that we could identify where the issue was.

Similar Messages

My iPhone 4that just upgraded to 6.0 no longer has the 3G symbol on the status bar. It does have the E (edge AT

My iPhone 4that just upgraded to 6.0 no longer has the 3G symbol on the status bar. It does have the E
Symbol for edge. AT&T. Nothing in settings to turn off or on. Any help?

I fixed it. Go to settings> cellular> turn off toggle data and 3G off and on!!! Fixed

Adobe Send 'Error' At The End Of Status Bar

After waiting a good 45 minutes uploading 3 video files about 200 MB each, when the status bar reaches the end, I get an error message saying that one or more of the files could not be sent. The message did not specify which file failed and the entire message was cancelled with no other explanation.
I sent the same files to myself also with no success.
I am using Adobe Send for the 2nd time today after being switched from 'SendNow'. Earlier it worked fine.
I tried to send only 2 of the files and got the same message. Then I tried just one file.
I normally send this same file format all the time with no problems. My regular email works fine
Is there something going wrong with Adobe's transition to SendNow? What are the supposed benefits of the switch? The old desktop application worked best for me.

Hi again,
Would you mind testing your upload speed by going to testmy.net and running their tests?
I just uploaded a 150 MB file to cloud.acrobat.com in less than 1.5 minutes, and testmy.net reported that my upload speed is 7.9 Mbps (1 MB/s).
Yes, you should be able to do the upload/send operation in one action; I was asking you to separate them so that we could identify where the issue was.

I cannot view due to request for adobe flash drive....i keep getting blocked plug in. i downloaded the adobe but still have problem. can any one help

I cannot see any videos due to blocked plug in. I tried to down load adobe flash and still have problem. can any one help

Hello,
Safari, blocked plug-ins…
http://support.apple.com/kb/HT5271

CS6 Info pane broken. Titler still has problems.

When I select a clip, the Info pane no longer tells me it's duration, name, or any of the other info (besides TC) that it used to show under CS5.5 while I'm trimming the clip. Not good. I depend on it for a lot of... info.
Also, the titler still has a weird message when I create a new, or open an existing title. "Ringo" has been replaced with "mighty kilt."
Also, opening an old title occasionally crashes Pr.
Mac, 10.6.8. Pr CS6

When I select a clip, the Info pane no longer tells me it's duration, name, or any of the other info (besides TC) that it used to show under CS5.5 while I'm trimming the clip. Not good. I depend on it for a lot of... info.
Also, the titler still has a weird message when I create a new, or open an existing title. "Ringo" has been replaced with "mighty kilt."
Also, opening an old title occasionally crashes Pr.
Mac, 10.6.8. Pr CS6

Adobe CC Desktop App still has problems updating

Will Adobe EVER get this damn app working properly - it seems such a simple app yet there have been a ton of problems from day one. The latest with the update today - one of my machines closed explorer and left the desktop missing and my other PC updated CC and the app did not start again after the update. Really poor show CC desktop app team!

Hi again,
I also tried to download the CC Desktop installer. I launched it and the result was as follows :
Which is very informative, indeed. I logged off / logged on (Windows) and relaunched. This time the installation succeeded (version 1.7.1.418).
Actually, each time the CC Desktop app is updated, the only way to install is to download the installer. The auto-update feature of this app simply doesn't work.

WAP54G Wireless Repeater still has problems after setup

I have a WAP54G configured as a Wireless Repeater to my WRT54GS router. I have configured all equipment on my wireless network (192.169.1.xxx) with static IP's. My Router MAC has been entered in the WAP54G and the link works . . . kinda . . . .sorta. . . .with issues
I also have an A/V receiver hard-wired to the RJ-45 at the Wireless Repeater.  I am able to access Internet Radio stations on the A/V Receiver thru the Wireless Repeater uplinked to the Router and out to Internet. I also have a Synology NAS which is hard-wired back at my WRT54GS router. Although the A/V Receiver can "see" all audio files and folders on my network NAS, I am unable to play any of the MP3 files. The Receiver will immediately display "Access Error". As a test, if I temporarily plug the NAS network directly into the A/V Receiver (threreby bypassing all of my home networking) all MP3's will play fine.  Therefore, the problem must either be in the WAP54G, the WRT54GS, or the configuration in one or both of them..
My connections are:
A/V Receiver ------ WAP54GS {{{{{{{{{ wireless }}}}}}}}}}} WRT54GS ----- CABLE Modem ------- Internet
I also have a NAS directly hard-wired into one of the WRT54GS RJ-45 ports.
My questions::
1. When configured as a Wireless Repeater, wll the WAP54G still fully function with hard-wired devices connected directly into the RJ-45 port (as I currently have it set up)? Most all of the literature and articles I've seen concentrate on the expansion of the Wi-Fi portion of the Wireless Repeater only and make minimal or no mention of using the integral RJ-45 port.
2. Since the WAP54G Wireless Repeater has a separate actual IP address, do I need to do any changes to addressing on either my A/V Receiver, NAS? or Router Specifically, does the Wireless Repeater become fully "transparent" to my home network or do I need to re-enter different IP addresses, port forwarding or port trigerring? (This is the stuff I don't really understand.)
3. Should the system basically function as I have described or is there anything I'm obviously missing that would prevent the A/V Receiver from properly communicating with the NAS thru the Wireless Repeater and the Router?
All replys or suggestions gratefully appreciated.

Thanks for the reply,
As far as your sketch is concerned . . .Yes, that is what I attempted to describe in my earlier postings.
Before my first post, I attempted to verify as much as I was able.
I noted earlier that I had tried AP Client and could not get it to work. Literature for the WAP states that the only mode which can connect a WAP to a WRT router is the Wireless Repeater mode. On the WAP, both AP Client, and Wireless Bridge modes state that each will only communicate with another (second) WAP (there is no mention of WRT in those modes). That would require a second WAP and yet more $$$, just to uplink ONE RJ-45 to my router.  OK, since it can't damage anything, I tried the other modes just for "grins & giggles". It resulted in a very-unhappy wireless network. All network devices poped up with IP-Conflict errors and the network came to a crashing halt.  This is why I ended up with Wireless Repeater mode.
Yes, with the WAP configured as Wireless Repeater, I AM able to easily ping the receiver from anywhere on my network. In fact, I've tried 3-4 different ethernet devices plugged into the RJ-45 port of the WAP and I can ping them all.  Amazingly, every other ethernet device I plug into thje WAP work perfectly  . . except streaming music from my NAS to my A/V receiver. At that point, I suspected the receiver has a network port problem except it perfectly streams internet radio thru the WAP.  The only thing the WAP will not stream successfully is music from my NAS. I should also clarify that ALL firewall features on my NAS are disabled because it is already on the secure side of my router. Therefore, I'm positive nothing in the NAS is blocking access from the WAP.  I've also verified my other 3 home PC's can access the NAS. Two PC's are hard-wired to my router net and one PC is a laptop with wi-fi linked to my WRT router (all are on my 192.168.1.xxx network).  The REALLY screwy part is that I CAN display all files and folders on the NAS from the receiver . . they just won't successfully play without giving a network error message. Lastly, as a test, I've even temporarily disabled all wi-fi security. Result is identical.
To eliminate everything but the WAP, I temporarily stretched a 75' Cat-5 cable between the receiver and my WRT router. With no other changes or setting mods, it immediately works perfectly. Seriously, I've spent dozens & dozens of hours on this. I"ve even borrowed another WAP from a friend (same version & newest firmware revision) and once it is configured, it does the exact same thing. I've even did a WAP hardware "Reset" and reconfigured it from scratch . . . also same thing.
Again, to clarify, ALL of this is on the same side of my home network. Everything is within my 192.168.1.xxx. I've triple-checked that I have no IP confilicts, I've tried both DHCP and using static IP's.  I've even tried disconnecting ALL other devices except for my receiver, the WAP and the WRT with the same results.   I am NOT trying to access any of this from the internet side of my router, so I shouldn't need to mess with port forwarding amd all that. Everything says it "should" work . . . but yet it doesn't, on TWO different WAP devices. All I can figure out is that the RJ-45 port on the WAP is not "fully transparent" when configured as a Wireless Repeater. The literature does not state whether it is or if the device is designed as a Wi-Fi repeater only.
Since I'm only trying to get a single RJ-45 device up-linked to my router, I'm inclined to pick up a $30 ethernet to wi-fi gaming adapter, throw my old WAP on the shelf and get a beer. It should work, and I've spent WAY too much time on this already.

AlwaysOn 2012 Failover has problem: fails

Hi all,
this is my first post ever, so I apoligize if I'm not doing well.
We installed SQL Server 2012. All good!
We configured AlwaysOn High Availability Group. Some problems but all good!
We are testing and we are having some problems. If we shutdown node A all resources go to node B and all still working. When we just stop the SQLServer service the role doesn't failover. What we noticed is that the listener and the IP don't go the node B.
If I force manualli the role to move to node B all work fine.
What could be the problem?
For me is the WFCI that doesn't feel correctly the fail of the service and don't move the IP to node B: I investigated in the dependencies but I couldn't figure out how to set them.

Hi Fabio,
According to your description, you have configured the AlwaysOn High Availability Group with node A and node B, then you tried to test the failover, at first time when you shutdown node A it failed over successfully, but after that when you stopped the SQL
Server service it did not failover, right?
As far as I know, the cause of this issue may be that you've reached the WSFC failure threshold during your test of the failover.
The WSFC failure threshold is defined as the maximum number of failures supported for the availability group during a given time period. The default time period is six hours, and the default value for the maximum number of failures during this period is
n-1, where n is the number of WSFC nodes.
If an availability group exceeds its WSFC failure threshold, the WSFC cluster will not attempt an automatic failover for the availability group. Furthermore, the WSFC resource group of the availability group remains in a failed state until either the cluster
administrator manually brings the failed resource group online or the database administrator performs a manual failover of the availability group.
For more information about Flexible Failover Policy for Automatic Failover of an Availability Group (SQL Server), please refer to the following article:
http://msdn.microsoft.com/en-us/library/hh710061.aspx
As you have only two nodes in this case, so it only be able to automatically fail over once during six hours. In order to change the failure-threshold values for a given availability group, we can use the WSFC Failover Manager Console. For more details about
these steps, please refer to the following article:
http://blogs.msdn.com/b/sqlserverfaq/archive/2012/03/15/inf-alwayson-the-secondary-database-doesn-t-come-automatically-when-the-primary-instance-of-sql-server-goes-down.aspx
If you have any question, please feel free to let me know.
Regards,
Jerry Li

3g network still has problems after 3.1.2. PLease Help!

I have recieved a new iphone 3gs, a new sim card, rebooted my phone to factory settings, updated to 3.1.2, and have been on the phone with support for hours but i am still having the same problem where i cant make or recieve calls and a restart fixes it, also if i switch off the 3g network and run on edge it works too. PLEASE HELP!

No idea where you are, but if it is at all convenient make an appointment and take it to an Apple store.
Phil

Sending mail has suddenly failed

Private mail server, using IMAP/SSL on port 993 and SMTP/SSL on port 2525. COnfig hasn't changed but iPhone keeps saying that I need to specify a password in order to send mail. I have re-entered the password several times, have also tried recreating the mail profile. I have soft and hard booted the iPhone. Anything else I should try? These settings are working from a PC-based mail client too, so the server is OK.
The error is "The user name or password for SMTP:[email protected] is incorrect."

I've seen a few of these problems recently on the forum and the answer I saw yesterday was to delete the account and re-enter it.
Seemed to work but the person didn't know why.
Worth a try

Very disappointed GTX 670 OC still has problems after international RMA

I bought the N670GTX-PM2D2GD5/OC vga in amazon in the United States and brought it back with to Brazil me 6 months ago. At that time I got red screen of death RSOD and send it to RMA in the US (which cost me more money) since the local MSI office doesn't accept products bought outside Brazil.
6 months later, I have the board with me.
I updated nvidia drivers, plugged in the card and this was the result after first boot:
After four tries it booted into windows and everything seemed normal. After playing BF3 for about 15 minutes the screen goes black and I have to hit the power button to reboot. Sometimes it would show me a driver crash inside widnows "nvidia driver stopped working bla bla". Last try I couldn't boot into windows and the blue screen appeared again. I am able to run windows only in safe mode.
I am very disappointed with MSI product quality and customer service.
Any ideas of what I could try before sending this thing back AGAIN? I tried downclocking the board, no luck.

Current Vbios: NV284MS.101 This is the latest legacy Vbios.
There are some later Win 8 UEFI Vbios, but they may not be compatible with your main board. Is your mainboard have Win 8 Options in bios? You are welcome to try the vbios, but your computer may not boot after if it ins't compatible. You would need another computer in order to flash the vbios back to legacy in that case.
You may want to test the card in another computer as well to verify where the problem lies first. If the problem re-occurs in another omputer, then try that gop vbios.

Restored my ipod but i cant play music when i press play it has the pla sign in the status bar but no sound is coming out

please help

Hey Cece rawr, not sure I'm understanding you. If sound only works when headphones plugged in. Would indicate the switch inside the headphone port is stuck open. Look inside the port make sure it is free of foreign debris, like lint, dirt etc. if something is there, remove it. If port is clear, try quickly plugging / unplugging the headphone jack about 10 to 12 times to free the switch. May need to repeat this action. If sound is working OK through the speaker but intermittent with your headphones, would indicate a short in the headphones, try another pair of headphones with iPod and just to rule it out try the questionable headphones with a device known to work, does the problem move with headphones, if it does then it's the headphones, replace them. If the problem stays with the iPod, try resetting, press and hold both power and home buttons together, until the Apple logo appears, about 15 seconds+/-, then release both buttons. Or Go into Settings>General>Reset and tap Reset All Settings. If still not working, Connect to your computer, make backup copies of your stuff on your iPod to your computer first, then Restore to Backup. If still no joy, Restore to New. If still not working after restoring to factory settings then contact Apple and have your iPod evaluated for a hardware issue. Good luck, Cheers.

Still missing translations for NavBar tooltips and status bar

Again JDev 9.0.3.1 does not have german translations for the following JClient navigation bar tooltips:
- Execute/Re-execute the query
- Cancel Find Mode and switch to previously displayed data
The english status bar shows rowset information like "row 1 / 7 rows / modified: false". With german language we only see "1 / 7" and a funny looking dot instead of the modification info.
903 does not ship the sources of the UIMessageBundles anymore. So how can we correct this? Can we put the 902 source into our projects and add german descriptions ourself? Or can you publish the 903 sources?
The CSMessageBundle_de also contains some empty messages (EXC_DEF_MANDATORY_ATTR_EXCEPTION or EXC_ROW_NOT_AVAILABLE). Are they not used by BC4J?
Regards,
Michael Thal

Hi ,
Refer sap note 1159021-in client 100, 518950-efforts to translet the language.
You can run client maintainance again in client 100 and check.
let us know, further.
Thanks
R.

The Adobe Print Engine has failed to output your data due to an unknown problem

I am currently having a huge problem printing from indesign. I am running CS3 on a hi spec 08 Mac Pro (10.5.2) connected to an Epson 3800 Stylus Pro A2 printer. I keep getting the message <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. I have tried trashing the indesign preferences, I tried a new account... In fact I have just done a clean install of the entire OS. Just can't get it to print. I did have it printing on this machine before and the same document prints from my iMac. The problem seems to be something to do with the print dialogue. If I print WITHOUT checking the Printer settings in the Print dialogue is sends to the print, but the output is shocking as the paper selection is not right and uses photo black not matt black. When I DO check the printer settings and set it all correctly it gives me the <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. Anyone else had this or have any thoughts?

I am seeing this error too, but I've narrowed it down to an isolated set of circumstances. My client has begun rolling out Active Directory integration with Macs on their network. Here are the specifics:
-- Mac OS X 10.5.4, IDCS3 5.0.3
-- Using the Directory Utility, Macs are bound to AD with using the mobile account option (user folder is cached locally on workstation, hosted on the network)
-- The message immediately pops up after clicking 'Print' button in print dialogue.
-- Printers are a couple of different versions of DocuColor (250 and 260) with Fiery RIP front ends. Print queues are hosted on an AD print server and listed as Open Directory under Kind in the Add Printer dialogue.
-- Only IDCS and ILCS3 (13.02) exhibit this problem. PSCS3 (10.01), Acrobat (8.1.2) and Safari do not have the same issue, so it appears to be Postscript related
-- Printers not going through AD (IP or BonJour enabled HP B&W lasers) print successfully when logged in via the networked user. Logging into a local admin account resolves the problem as well.
-- This issue appears on freshly imaged machines, G5s and MacBook Pros, not just an isolated workstation. So its possible there is a problem with the source image, but it was created by another office and I'm just a consultant onsite at another location trying to sort things out. Other workstations still using Thursby's Dave software for file and printer access, running 10.4.11 do not exhibit same issues.
-- The console output lists this error when ID fails:
7/23/08 3:28:59 PM /Applications/Adobe InDesign CS3/Adobe InDesign CS3.app/Contents/MacOS/Adobe InDesign CS3[1374] passwordCallback: didn't find keychain item for "ipp://localhost/printers/DC01_Fiery250_5th";prompting for it
I have created a keychain entry to match this with no success.
-- None the suggestions in linked KB doc. resolve the issue. But that doc seems to be outdated as it references CS 1 and 2 versions of ID.
So, has anyone seen the same issues? AD integration appears to be the common thread, but I cannot find the cause.
Shawn Punga
Senior Systems Consultant
MacLab

Adobe captivate data not sending at the end of webinar. Is the adobe server still down?

Adobe captivate data not sending at the end of webinar. Reads "unknown error." Is the adobe server still down? This has been ongoing all of july 2014.

So the engineer came and, of course, everything was working ok. He did fit some kind of RF filter on my main socket, and 'changed the pair' on one of the outside cables. Since then, I've only had a noisy line once, and seem to have been connected for 3 days solid, which is a record!
I've switched back to my BT Home hub 3, which guavas me more stats. The line has previously given me up to 6mb/s, now only getting 1.6.
Do you think, now the line seems more stable, with the stats below I should be able to maintain a higher speed now?
Thanks
Line state: Connected
Connection time: 3 days, 02:19:39
Downstream: 1.601 Mbps
Upstream: 444.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.3 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 17.7 dB / 22.6 dB
Line attenuation (Down/Up): 44.8 dB / 27.0 dB
Output power (Down/Up): 18.6 dBm / 12.6 dBm
FEC Events (Down/Up): 3144673 / 0
CRC Events (Down/Up): 14434 / 38
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 111873 / 10
Error Seconds (Local/Remote): 1011 / 4

Adobe Send Still Has Problems! Fails At End of Status Bar

Similar Messages

Maybe you are looking for