Adobe SendNow - What is the optimal size for custom logos?

I just tried to upload a custom logo (800x200) and it seemed to be stuck up in the top left corner, with a large amount of blank white screen.
What is the optimal size for this please, and how do I centre a smaller logo?
It is of course entirely possible I will need to make one in PS - not a problem - but the right sizes would be helpful info please.
Many Thanks

That is what I read too - but when I uploaded one it got tucked up in the top left corner of the "custom" setup thumbnail.
Perhaps it is just a glitch in that dialogue, but it certainly looked as if there was a raft of space to the right & underneath.
Still, probably Pilot Error so I will recheck - thank you Dave.

Similar Messages

  • How do you determine the optimal size for Mozilla Firefox?

    How do you determine the optimal size for cache in Mozilla
    Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

    I found that the best idea is to let Firefox decide that itself.

  • I can't synchronize my movies. What is the video size for ipad2?

    I can't synchronize my movies in my IPad 2. What is the video size for ipad2?

    Ok but what is the correct format ???
    For the moment it is divx...
    Thank for your help !

  • What is the standard API for Customer Contact creation in R12

    Hi All,
    What is the standard API for Customer Contact creation in R12. my requirement is I need to create contact against Customer(Person/Organization).
    I need to develop pl/sql package for create Contact using the following fields
    First name , Last name , Email, Phone no, Ph ext,Mobile no,Contact no,Job title, Job title code,Country,Address1,Address2,Address3,Address4,
    City,State,Postalcode.
    Please help me.
    Thanks,
    K.Murugesan

    Hi All,
    Please update if you have any solution.
    Thanks
    Maanasa

  • What is the phone number for customer service ... I want to pay my bill

    what is the phone number for customer service ... I want to pay my bill

    Hello Roofking,
    I'm sorry for your troubles. I have provided the steps to using the automated system below. This feature is free of charge.
    Call 1-800-COMCAST (1-800-266-2278) or 1-800-XFINITY (1-800-934-6489)
    Select preferred language (the system will default to English).
    Enter the phone number.
    Select option 2 for Payment.
    Select option to make a one-time payment.
     

  • What is the maximum size for open_cursors parameter in 11g database

    what is the maximum size we can set for open_cursors parameter in 11g database..

    Oracle® Database Reference
    11g Release 1 (11.1)
    Parameter type     Integer
    Default value     50
    Modifiable     ALTER SYSTEM
    Range of values     0 to 65535
    Basic     Yes
    For details, go to the following link:
    http://www.seasongreetings.org/documentation/oracle/database/11.1/server.111/b28320/initparams153.htm

  • What is the maximum size for mailbox per user (Exchange 2007)

    Hello,
    I'd like to know:
    What is the maximum size per mailbox, and is it not recommended to exceed 3 GB and about the items how many is the maximum per folder (inbox, .. )
    I've Exchange 2007 SP2, Outlook 2007 and 2010.
    Thank you.

    Hi
    There is no size limit on mailboxes up to the maximum size of your database.  I normally recommend 2GB mailbox limits if you have some form of archiving in place.  If you have no archiving in place then the limit should be set at the amount of
    data people need to keep - it is not a good idea for people to store mail in PST files because there is a limit on their mailbox.
    See this article for item count recommendations:
    http://support.microsoft.com/kb/905803
    Also you need to upgrade your Exchange 2007 server to SP3 ... SP2 has been out of support for nearly 3 years already:
    Exchange 2007 Support Lifecycle
    Steve

  • What is the limit size for a datafile

    Hello,
    I want to create a tablespace that is going to be 500 gigs large. I want to create two datafiles for this tablespace. I am thinking 250 gigs each. What is the max size a datafile can be? Can I have 2 datafiles (250+250=500)? Thanks.

    There is a limit, you may read this reference --> Re: Max size of datafiles
    ~ Madrid

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What is the best product for designing logo in adobe?

    Hi there! I just need to learn logo designing. That's why I want to know that what is the best product in adobe for designing professional logo? I hope better answers for this.
    Thank you.
    Damith

    Thank you so much MichaelKazlow Many of people says. Illustrator is best. But some people interested to CorelDraw. What is the deferent between both of this?

  • What is the optimum size for a WIFI subnet ?

    For LAN design fine,  keep the broadcast domain to an optimum size. What about WIFI design though ?  I want to use just 1 SSID and can have multiple vlans if I use AP groups on the controller..But how big is optimum size for a WIFI subnet ? I guess it depends on required speed, number of AP ,vlans and traffic profiles, but are there any recommendations ?
    Stu

    Hello,
    Great question
    First, if you are using a WLC, the WLC will proxy the broadcast for the clien so that it wont be sent over the wireless. With that being said, you will typically see larger subnets on the WLC solution. For exmaple, we have /21 here and they work fine for our voice, data and video SSIDs. Although, some people like smaller subnets and deploy ap groups accordoningly.
    Although, I have seen subnets on WiFi voice as a /16 with 5,000 phones in the subnet which to my surprise worked well. Of course, I wouldnt have designed it that large.
    If you are autonmous same holds truse, but if you configure the AP to send over the broadcast to the wifi clients you should consider a smaller subnet like a /23 or /24.
    As to client mix. Most folks will have a Voice SSID, Data SSID, Guest SSID so you can shape these accordiingly. Again, typically all my designs lead with a /21 or /22.

  • What's the optimal output for web?

    i have quicktime Pro - i'm trying to extract video footage from a dv file (my cinematographer's reel) and post it on my website. is MPEG4 the best i can do? and if so, how do i optimize that? if the footage was shot in dv - do i set it at 29 frames in the export Options? what about "key frames" - do i set that at 24 (default) or some other number? looking to get a decent movie file that doesn't look like rubic's cube w/ all the pixel squares.
    Thanks!
    Steve

    Thanks Jon,
    just a few questions to your reply:
    H.264 would provide
    better quality at given data rate and scales much
    better but requires QT 7 for both you and your
    viewers.
    Do most people have QT 7 at this point or is it best to post the movie in the most accessible format and sacrifice some rez? My H.264 is greyed out - perhaps because i'm not using HD footage? any idea?
    Optimization
    depends on many things such as target encode display
    dimensions, amount of storage space/bandwith
    available, and even the actual content itself. Since
    you have not indicated your goals here, it is
    difficult to provide concrete guidelines.
    i'm not that technically advanced to know the answer to this. i'm basically posting this to iWeb - i have maybe half a gig of storage on my website so i don't have to be that frugal. just want something to be decent quality but probably no more than 20 MB
    In the absence of other,
    overriding needs, it is generally best to set the
    frame rate to "current."
    what about "key
    frames" - do i set that at 24 (default) or some other
    number?Key frame rate is
    dependent on the content. Rapid motion, transitions,
    and the like require more key frames while slow
    motion, non-changing scenes require fewer. Generally
    speaking it may be best to use the "Automatic"
    setting for "average" videos. This setting applies
    the basic "Rule of Five" or a frame rate equal to
    five time the frame rate. The advantage here is, if
    there is a large inter-frame change in data, QT will
    insert extra frames as/if needed. Basically, the more
    key frames, the better the quality but larger the
    file size or greater the compression between frames.
    that makes sense. i don't have any slow motion so i'd like to make it look
    as smooth as possible.
    Thanks,
    STeve
    looking to get a
    decent movie file that doesn't look like rubic's cube
    w/ all the pixel
    squares.Pixilation can still
    occur with MPEG-4 when target compression is too high
    (i.e., the data rate drops too low for the encode
    display dimensions and content). This is one of the
    ares where H.264 really stands out. It can usually
    produce fairly good HD 720p (1280 x 720 progressive
    main profile) quality at even iPod "LC" compatible
    data rates.
    G4   Mac OS X (10.2.x)  

  • What's the best size for photos?

    What's the optimum image size for the iPod Nano? I'd like to transfer images as small as possible.

    I believe if you are only transferring the images and not the full-resolution photos, iTunes does the optimization for viewing so the pics will be small. You have a choice within the iTunes preferences.

  • What is the optimal resolution for pdfs?

    I have PDF downloads on my website and would appreciate some advice on the optimal quality of the files - bearing in mind visual quality & download speed.

    "Smallest File Size" as seen in Acrobat Pro's Distiller.  That usually means 72ppi / 300dpi.

  • Poor interface with Adobe CS4 and setting the file size for emails

    In frustrations over an unfixed bug in iPhoto (slide shows) in addition to too many limitations, I am trying out Aperture. So far it has been a big disappointment. I like Photoshop (CS4) with layers etc. as well as Adobe Camera Raw, both of which I intend to continue using. The workflow in Aperture appears disappointing (Photoshop) and totally absent (Adobe Camera Raw). It seems like Apple's attempt to capture some of Adobe's market share has has happened on the consumer's expense? Besides disappointing functionality, I have run into a surprising problem: No matter how I set the email photo export preset in preferences, the attachment shows up as a large file when exported to Entourage. The size does not change no matter how I set this preference.
    My 21 years of loyalty and enthusiasm towards Apple has taken some heavy blows lately. With some 15000 photos and 35+ albums in iPhoto, I don't see too many alternatives. Can someone tell me if there is a way around these problems.

    First of all I am not comparing Aperture to Photoshop by expecting the layers function. It is the interface between the two I am questioning. We obviously also have different expectations to Aperture. Mine are solely based on my experiences with iPhoto and what Apple tells me on their website:" Aperture 3 is a professional photography application that lets you refine images, showcase your photography, and manage massive photo libraries. Aperture 3 gives you all the easy-to-use tools you need to import, organize, compare, enhance, and share your photos." I do not find a single sentence stating that it is primarily a "Raw image editor processor" as you are defining it. I was not looking for a new raw editor. I was, however, based on Apple's claims above, expecting a combined advanced editing an photo library application. As such I also expected layers. That is not comparing it to Photoshop. Naturally our views are based on expectations and experiences, and ours are just different, that is all.

Maybe you are looking for

  • Is there a way to select a specific area on an image to denoise?

    I can only denoise and entire image and would like to be able to select for example the background of a bird flying and not the bird for denoising.

  • TIMESTAMPDIFF question

    Does anyone know why I'm getting different result for the following: TIMESTAMPDIFF(SQL_TSI_MONTH, expr1, CURRENT_DATE) where expr1 = 10/15/2008. The result is 12. TIMESTAMPDIFF(SQL_TSI_MONTH, expr1, CURRENT_DATE) where expr2 = 10/31/2008. The result

  • ISO-8859-1: %22 equals & # 3 4 ; ?

    NOTE: In this topic, & # 3 4 ; should contain no spaces. But when I remove the spaces, it automatically converts it to " , so that's why I put spaces. Hey all, Sorry for the 'difficult' topic title. I experience a problem when I try to parse HTML dow

  • Refurb EA6900 router password?

    Hello all! Decided to extend my wireless network by adding a secondary router as a wireless access point. Ended up with a refurb unit (long story). Anyway I am completely unable to start the so called Smart WiFi setup. No matter how many times I do a

  • BAPI's for copy batch characterestics  at the time of Goods Recipt save

    Dear members, I am copying the Batch characteristics values of the order(Process order) to new batch at the time of GOODS RECEIPT (GR) in repack process. Can anyone please let me know  there are any BAPI's for copy batch characteristics values to New