Adobe Services fail with Adobe CC 2014 on Windows 8.1

Hi, every time I try to open Adobe Extensions Manager CC I get this window (in Spanish):
I tried to uninstall and re-install several times and nothing.
Thanks for your help.

It seems that you don't have the same version of "Adobe Extension Manager CC.exe" and "ExManCoreLib.dll". Perhaps you encountered update failure. Please right click these two files and select "Properties", check "Product version" in the "Details" tab page. If they are different, Please uninstall it, download installer from Adobe - Exchange : Download the Adobe Extension Manager and install it, then update it to the latest version.

Similar Messages

  • Ws manager service fails with non-soap-response

    I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
    I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
    with a non-soap-response error :
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
    This is returned by the original web service :
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <env:Body>
    <n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
    env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    </n1:SendMessageResponse>
    </env:Body>
    </env:Envelope>
    What is going wrong here ?

    I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
    I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
    with a non-soap-response error :
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
    This is returned by the original web service :
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <env:Body>
    <n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
    env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    </n1:SendMessageResponse>
    </env:Body>
    </env:Envelope>
    What is going wrong here ?

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

    Hi,
    I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
    Anyone else had problems or success with this?
    Thanks in advance.

    9thdoc wrote:
    I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
    Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
    You need the Snow Leopard installation disk or a replacement for it.

  • Adding Silverlight-enabled WCF Service failed with error code 50

    Hello everyone,
    I am very new to Silverlight ,and I am working on silverlight with WCF.
    When I tried to add a silverlight-enabled WCF service. I kept getting the error
       Method failed with unexpected error code 50.
    I am working with Silverlight 5 and VS 2013 ,I have no idea about it. I appreciate that if anyone can help?
    Thank you

    Hi,
    Please make sure your wcf is valid.
    Here are some resources which could help you:
    https://msdn.microsoft.com/library/cc838234(VS.95).aspx
    http://www.codeproject.com/Articles/262164/Using-WCF-Service-with-Silverlight#_articleTop
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Reports Service failes with 186 error after Disco4i Admin install.

    OS NT 2000
    DB 8.1.7
    9iAS 1.0.2.1
    Disco Admin 4.1.33e
    Everthing was working fine until the install of Disco4i Admin. It would error on the install until I stopped the Reports Service. Post install - The reports service failed to start. NT specific error 186.
    I've performed a TNSPING80.EXE myserver & verified the TNSNames.ora configuration in 806, iSuites, and 8.1.7. Everything looks ok.

    If you have set the TNS_ADMIN environment variable or registry key to an alternate value, Oracle9iAS Reports Services may fail to start with an error 186 or REP-0186. In such a case, you can start Oracle9iAS Reports Services from an MS-DOS command prompt as follows:
    prompt> setenv TNS_ADMIN <IAS_HOME>/6iserver/network/admin
    prompt> <IAS_HOME>/6iserver/reports60_server start
    replacing <IAS_HOME> with the directory where you installed Oracle9i Application Server. This will force Oracle9iAS Reports Services to use the tnsnames.ora file at <IAS_HOME>/6iserver/network/admin.
    Hope this will help
    null

  • A few Problems/Glitches with InDesign CC 2014 on Windows 7 and CC on Mac OS 10.6.8

    We're experiencing some quirky glitches with InDesign CC on a Mac running OS 10.6.8, and with CC 2014 on Windows 7. I'll indicate which system on each problem...
    Anchored objects disappear when anchored into boxes that are, in turn, anchored into text flow.
    We publish catalogs and anchor all our images to the accompanying text so that as we remove/add products, all the text and images flow together. We have several instances in which we use a box to highlight certain products. In that box might be 1, 2, 3, or more products, each with anchored images. When we anchor those boxes within the main text flow, many of the images inside the box disappear. The anchors are still there but we can't see the images. This is happening on both systems.
    "Replace" field disappears when selecting anything from the “wildcard/special char.” menu in "find and replace". Windows.
    Shift click to unlock master page items bring background item to foreground.
    In CS4 and 5.5, if you shift-clicked to release an item from the master page, the top-most item was released. Now it seems as though the item that is farthest behind gets released first, which makes it impossible to select any other items if that one is a full-page background. Both systems.
    Double/triple clicking on a word to select it does nothing.
    You could literally click for 5 minutes and it wont select anything. You have to click off the box, use selection tool then click back onto the box and then it will work. You can move the cursor a few letters away and it will select the appropriate line or paragraph but it did not work this way in earlier versions. Both systems.
    Any suggestions, or is it something we're doing wrong?
    Thanks,
    Lloyd

    The list of obvious errors and glitches and illogical behaviour in all Indesign versions is long. With newer versions, some items disappeared from the list, but new ones were added.
    Best is to use the Adobe bug report form to let Adobe know in hope, they really read, care and someday do something about it.

  • Help!!! iTunes install error "Apple Mobile Device Service Failed To Start". Error 7 (Windows Error 193)

    Help! Following a standard upgrade I got the error message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 193).
    I am running Windows 7 and installing again brings the message "Apple Mobile Device Service failed to start. Verify that you have sufficient privileges to start system services"
    I have uninstalled everything Apple, deleted all related folders and run as administrator numerous times with no luck.
    I had hoped that iTunes 12.1.2 would resolve the issue, unfortunately it failed to do so leaving me iTunes free which is driving me mad!
    Can anyone advise what else I can do to resolve the error and bring back iTunes?
    Thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Project Professional 2013 Installations Fails with Office 2010 installed on Windows 7 x86

    When attempting to install Project Professional 2013 Pro (x86) on Windows Professional x86 PC that has Office 2010 ProSp2 installed client getting an error message at the end of the installation "Project 2013 has encountered an error during setup".
    I have gotten the installer to work on x64 PC with Office 2010 installed. (Something worth noting that even thought I set the reboot to prompt its automatically reboots without warning but, appears to be working.)  I also tried using the OTC, custom XML
    file and just running setup.exe and get the error no matter what. When looking in the logs I there are MSI installer error with an error: Product:
    Microsoft Project Professional 2013 - Update '{A6FFA77F-C1C1-43D3-A2C7-6A5B68138D9F}' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for
    instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
    Without having to uninstall Office 2010 what do I need to modify in the installer to get it to Project 2013 Pro to install on the x86 machine?
    Thanks

    Hi,
    Your environment will support 32 bit of Project professional 2013 (x86) as you have Windows and Office of (X86).
    You try to modify registry then you wont face issue.
     The issue when you hit a "1653" is that Windows
    Installer "DisableRollback" is set. Office 2013 requires that "rollback" be enabled. If you are getting a "1653"
    error in your logs as Ken did then the solution is to delete the "DisableRollback" (or set to '0') at the following registry keys:
    HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Installer
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
     these are the issues I've seen:
    Scheduler service was stopped. At a cmd window typing "net start schedule" resolves the problem.
    CMD.exe was customized via the following registry key. Solution was to temporarily disable the customization by changing autorun value to autorun_old. 
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Command Processor
    Permission issues - seems some custom permissions affected Ingram's install which he explained in his previous post.
    Environment variable "ComSpec" had been modified (semicolon added). Fix was to remove the added semicolon (there should be no semicolon).
    The way to identify you are hitting this specific issue is if in the %temp%\OfficeSetup.log there is a mention of "Office64MUI.msi" failing to install with return value of 1603
    If you want to enable verbose logging via the following key, rerun your failed install, and collect all the setup and MSI* logs that will give more information.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
    "logging"= "voicewarmup"
    kirtesh

  • Can I install Adobe Muse 2014 on Windows 7 32-bit?

    Hello I bought Adobe Muse the old version 7 before. Now, I'm planning to buy the new one 2014 but it says in the System requirements...
    Note: 32-bit systems are no longer supported as of June 2014.
    This is very hard for me because...
    If I upgrade my OS to 64-bit that means, I would probably encounter A LOT of problems in my drivers and softwares.
    Plus, I don't have time to reinstall every program and settings I've had for the past 3 years. Finally, this is my work PC.
    What can I do?
    Thanks.

    Hello Jeff,
    Too bad, this is really hard for me to do. I guess I have to abort my plans with Adobe Muse for now.
    Yes I've confirmed in my System Info that my processor is 64-bit ready but it doesn't matter...
    Thanks for replying.

  • Reports Service Fails with 186 error after Disocverer4i Admin Install

    DB = 8.1.7
    9iAS 1.0.2.1
    Everything was working fine until the install of Disco4i Admin. I've performed a TNSPING80.EXE myserver & verified the TNSNames.ora configuration. Everything looks ok.

    Verify the entry in the tnsnames.ora for the Reports Server. The string
    should look something like this:
    Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
    Here is a cut from Doc ID 122038.1 on Metalink:
    PROBLEM DESCRIPTION:
    ====================
    After installing IAS Enterprise Edition, you attempt to start the Reports
    Server Service (see below) and get the error:
    REP-0186 - Daemon failed to listen to port.
    For Windows NT:
    Start-->Settings-->Control Panel-->Services-->Start Oracle Reports Server.
    Get REP-186 error.
    For UNIX:
    Run the following Script:
    $ORACLE_HOME/developer6i/reports60_server start.
    SOLUTION DESCRIPTION:
    =====================
    WINDOWS NT 4.0 Server:
    The primary cause for this error is that the Reports Server Service cannot
    find a valid entry in the tnsnames.ora file. When the MTS starts, it tries
    to read the entry in the $ORACLE_HOME\net80\admin\tnsnames.ora file. There
    may be multiple files called tnsnames.ora on the machine. The following hint
    may help in setting the default location for this file on the Windows NT
    platform:
    1. Click Start-->Run and type in REGEDIT; press enter; click OK.
    2. Navigate to HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE folder.
    3. With this folder open, right-click in the right-hand pane and select New-->
    String.
    4. Enter "TNS_ADMIN" (w/o the quotes) for the new string.
    5. Double-click on the new string, and enter the <drive>:\<path> to where your
    centralized tnsnames.ora file is stored for string's value. This setting to
    the registry will define a common TNS_ADMIN directory, allowing for a
    central file to be managed.
    6. Verify the entry in the tnsnames.ora for the Reports Server. The string
    should look something like this:
    Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
    Where <serverdnsname> is the name of the DNS name of the server
    (the server's IP address may also be used instead. "World"
    is the name of the default domain in the sqlnet.ora file.
    7. Navigate to Start-->Settings-->Control Panel-->Services, find the Oracle
    Reports Server [<RepServerName>] and start the service.
    a) If the Service still fails to start, ensure that there is a printer
    (local or network) installed, and in the Control Panel-->Services, click
    the Oracle Reports Server [<RepServerName>], and click the Startup
    button.
    b) Under the "Log on As" section, select "This Account", then click the
    ellipsis (...) button. In the dialogue box that comes up, select a user
    that has access to the system's printer, and type in the user's password,
    (do this even if the asterisks (*) appear), and click OK. Legacy
    versions required a printer driver be installed on the Server in order
    to format document output, even when creating cached documents for the
    web.
    c) Restart the Reports Server Service.
    UNIX:
    The following examples assume that IAS is installed in:
    /u01/app/oracle/product/ias
    and the $ORACLE_HOME is defined as the same.
    1. Edit the $ORACLE_HOME/developer6i/reports60_server script file, noting the
    following (example) settings:
    csh:
    setenv TNS_ADMIN $ORACLE_HOME/network/admin
    bsh/ksh:
    export TNS_ADMIN=$ORACLE_HOME/network/admin
    2. Define a printer per NOTE:74872.1 and set the PRINTER environment to match:
    csh:
    setenv PRINTER <queuename>
    bsh/ksh:
    export PRINTER=<queuename>
    3. Verify the entry in the tnsnames.ora for the Reports Server. The string
    should look something like this:
    Rep60,Rep60.world=(ADDRESS=(PROTOCOL=tcp)(HOST=<serverdnsname>)(PORT=1949))
    Where <serverdnsname> is the name of the DNS name of the server
    (the server's IP address may also be used instead). "World" is
    the name of default domain in the sqlnet.ora file.
    4. Now start the $ORACLE_HOME/developer6i/reports60_server script file.
    EXPLANATION:
    ============
    The IAS installation creates a TN S_ADMIN in the $ORACLE_HOME/developer6i
    directory, but the Reports Server is not able to find it, due to the defaults
    setup by the installer.
    REFERENCES:
    ===========
    Bug:1327922, SERVER SPECIFIC ERROR 186 STARTING REPORTS SERVER
    Bug:1092182, REPORTS SERVER CAN NOT LAUNCH WITH THE ERROR 186
    Note:74872.1, How to Configure Report Server 6.0 and Cartridge on Unix
    Oracle Information Navigator (IAS Online Documents CD),
    article:<CDROMDRIVE>:\doc\forms.6i\a83592\pbr_case.htm ,
    "Configuring the OracleReports Server on Windows NT and UNIX
    null

  • OLEDB select from Analysis Services fails with error codes 0x80040E21 and 0xC0202009

    Hi,
    In IS2008 SP1, I have an OLEDB source component that uses an Analysis Services OLEDB connection to run an MDX statement (set in the "SQL command text" property). This already worked for other cubes with the same MDX statement (apart from different hierarchy
    and cube names) in several other IS packages.
    But in this package, I keep getting the following errors when executing:
    Error: 2011-12-08 14:12:42.70
       Code: 0xC0202009
       Source: myDataflow myOLEDBsource [190]
       Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred.
     Error code: 0x80040E21.
    End Error
    Error: 2011-12-08 14:12:42.70
       Code: 0xC004701A
       Source: myDataflow SSIS.Pipeline
       Description: component "myOLEDBsource" (190) failed the pre-execute phase and returned error code 0xC0202009.
    End Error
    As usual with AS OLEDB, you get warnings for all columns that the data type is unknown and hence set to DT_WSTR(255). This is the case for the working packages and for the non-working one.
    And when I click on the "Preview" button in the OLEDB source, I see the three column two row resultset as expected.
    As I found some other posts with similar error messages that could be resolved by changing the 32 bit and 64 bit setting, I tried in BIDS 2008 (32 bit) on Vista 32 bit, dtexec 32 bit on the same computer, dtexec 64 bit and dtexec 64 bit on a Win2008 server,
    all with the same results.
    SQL Server Profiler shows that the MDX statement is executed without errors when running the package. I do not see any relevant difference between the working packages/cubes and those not working. I re-created the OLEDB source component several times, even
    copied it over from a working package, and still have no success.
    I even executed the statements in an XMLA sheet in Management Studio with the PropertyList taken from the trace, without seeing anything obvious in the result.
    Any ideas what I could do to get this working?
    Is there any reference explaining OLEDB error codes?
    Thanks
    Frank

    Hi,
    I finally got it working. Re-creating the connection manager solved the issue. There was no difference between the not working and the working connection in the Connection Manager Editor. When I compared on XML source level in the package, I found that the
    working version contained Format=Tabular in the connection string, while the not working version did not contain this.
    Frank

  • SOAP-Request to external Web Service Failed with GENERAL_ERROR PART UKNOWN

    Hi,
    i have generated a Consumer Proxy with the following WSDL File:
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Mit XMLSpy v2010 rel. 2 (http://www.altova.com) von Ralph Rothe (n/a) bearbeitet -->
    <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tns="http://new.webservice.namespace" targetNamespace="http://new.webservice.namespace">
            <wsdl:types>
                   <xs:schema targetNamespace="http://new.webservice.namespace" elementFormDefault="qualified"/>
            </wsdl:types>
            <wsdl:message name="greetAnfrage">
                   <wsdl:part name="user" type="xs:string"/>
            </wsdl:message>
            <wsdl:message name="greetAntwort">
                   <wsdl:part name="return" type="xs:string"/>
            </wsdl:message>
            <wsdl:portType name="TestServerPortType">
                   <wsdl:operation name="getResults">
                           <wsdl:input message="tns:greetAnfrage"/>
                           <wsdl:output message="tns:greetAntwort"/>
                   </wsdl:operation>
            </wsdl:portType>
            <wsdl:binding name="TestServerBinding" type="tns:TestServerPortType">
                   <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
                   <wsdl:operation name="getResults">
                           <soap:operation soapAction="urn:#NewOperation" style="rpc"/>
                           <wsdl:input>
                                   <soap:body use="literal"/>
                           </wsdl:input>
                           <wsdl:output>
                                   <soap:body use="literal"/>
                           </wsdl:output>
                   </wsdl:operation>
            </wsdl:binding>
            <wsdl:service name="TestServerService">
                   <wsdl:port name="TestServerPort" binding="tns:TestServerBinding">
                           <soap:address location="http://92.79.135.41/soap/server.php"/>
                   </wsdl:port>
            </wsdl:service>
    </wsdl:definitions>
    If i testing the Error "GENERAL ERROR - PART UNKNOWN (NULL) occur. A payload trace with SRT_UTIL i show a correct response.

    Hi,
    i have generated a Consumer Proxy with the following WSDL File:
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Mit XMLSpy v2010 rel. 2 (http://www.altova.com) von Ralph Rothe (n/a) bearbeitet -->
    <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tns="http://new.webservice.namespace" targetNamespace="http://new.webservice.namespace">
            <wsdl:types>
                   <xs:schema targetNamespace="http://new.webservice.namespace" elementFormDefault="qualified"/>
            </wsdl:types>
            <wsdl:message name="greetAnfrage">
                   <wsdl:part name="user" type="xs:string"/>
            </wsdl:message>
            <wsdl:message name="greetAntwort">
                   <wsdl:part name="return" type="xs:string"/>
            </wsdl:message>
            <wsdl:portType name="TestServerPortType">
                   <wsdl:operation name="getResults">
                           <wsdl:input message="tns:greetAnfrage"/>
                           <wsdl:output message="tns:greetAntwort"/>
                   </wsdl:operation>
            </wsdl:portType>
            <wsdl:binding name="TestServerBinding" type="tns:TestServerPortType">
                   <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
                   <wsdl:operation name="getResults">
                           <soap:operation soapAction="urn:#NewOperation" style="rpc"/>
                           <wsdl:input>
                                   <soap:body use="literal"/>
                           </wsdl:input>
                           <wsdl:output>
                                   <soap:body use="literal"/>
                           </wsdl:output>
                   </wsdl:operation>
            </wsdl:binding>
            <wsdl:service name="TestServerService">
                   <wsdl:port name="TestServerPort" binding="tns:TestServerBinding">
                           <soap:address location="http://92.79.135.41/soap/server.php"/>
                   </wsdl:port>
            </wsdl:service>
    </wsdl:definitions>
    If i testing the Error "GENERAL ERROR - PART UNKNOWN (NULL) occur. A payload trace with SRT_UTIL i show a correct response.

  • Decision Services Failing with operationErroredFault

    When invoking a decision service in BPEL 10.1.3.1 I sometimes experience operationErroredFault. This appears to be when the server is under load.
    The Process has been written to catch and retry on remoteFault and bindingFaults and the operationErroredFault is reported in a catch all branch.
    If the same details were put into the process in a subsequent attempt then the call would succeed. However I am reluctant to add operationErroredFault to the list of exceptions we retry on automatically as we do not know what is causing this fault.
    Has anyone had any experience of this problem as it appears to be occurring on a Production project of 10.1.3.1 BPEL.? Does anyone have information on what may be causing the problem
    I would appreciate any input into this problem
    Kind Regards

    In addition to my previous post we are still experiencing the problem. I have included some additional information below.
    The error that is reported in the BPEL console is as follows:
    <fault><operationErroredFault xmlns="http://xmlns.oracle.com/ValidateAttendanceList/AttendanceCheck"><part name="payload"><ns0:errorInfo xmlns:ns0="http://xmlns.oracle.com/ValidateAttendanceList/AttendanceCheck" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ns0:errorMessage xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://xmlns.oracle.com/ValidateAttendanceList/AttendanceCheck">Error while executing a rule session unit of work.
    The rule session ValidateAttendanceList:2510463 failed to execute a unit of work.
    Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    </ns0:errorMessage>
    </ns0:errorInfo>
    </part></operationErroredFault></fault></messages>
    The domain log shows the following errors:
    <2007-04-12 12:13:03,548> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> ORABPEL-36334
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Error while executing a rule session unit of work.
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> The rule session ValidateAttendanceList:2510579 failed to execute a unit of work.
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.executeUnitOfWork(OracleRuleSession.java:430)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:199)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1202)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:491)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.runtime.AttendanceCheckSOAPBinding_Tie.invoke_assertExecuteWatchStateless(AttendanceCheckSOAPBinding_Tie.java:60)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.runtime.AttendanceCheckSOAPBinding_Tie.processingHook(AttendanceCheckSOAPBinding_Tie.java:451)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    <2007-04-12 12:13:03,568> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    <2007-04-12 12:13:03,569> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at java.lang.Thread.run(Thread.java:595)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Caused by: oracle.rules.rl.exceptions.JavaException: exception in invoked Java method
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.rules.rl.exceptions.ExceptionFactory.createJavaException(ExceptionFactory.java:478)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.ReflectFunctions.userMethodException(ReflectFunctions.java:797)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.DefinstanceList.createNewShadowFact(DefinstanceList.java:324)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.DefinstanceList.assertObject(DefinstanceList.java:604)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.Rete.assertObject(Rete.java:1554)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.AssertObject.call(ReflectFunctions.java:1554)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.FunctionHolder.call(FunctionHolder.java:30)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.Funcall.execute(Funcall.java:280)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.rules.rl.engine.Engine.callFunction(Engine.java:360)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.rules.rl.RuleSession.callFunctionWithArgumentList(RuleSession.java:404)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.rules.rl.RuleSession.callFunctionWithArgument(RuleSession.java:328)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.executeUnitOfWork(OracleRuleSession.java:330)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      ... 23 more
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Caused by: java.lang.NumberFormatException: empty String
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at java.lang.Float.valueOf(Float.java:360)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.xml.jaxb.JaxbDatatypeConverter.parseFloat(JaxbDatatypeConverter.java:204)
    <2007-04-12 12:13:03,573> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at generated.AttendanceCheckDataImpl.getMileageYtd(AttendanceCheckDataImpl.java:640)
    <2007-04-12 12:13:03,574> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at sun.reflect.GeneratedMethodAccessor138.invoke(Unknown Source)
    <2007-04-12 12:13:03,574> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    <2007-04-12 12:13:03,576> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at java.lang.reflect.Method.invoke(Method.java:585)
    <2007-04-12 12:13:03,576> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at jess.DefinstanceList.createNewShadowFact(DefinstanceList.java:317)
    <2007-04-12 12:13:03,576> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      ... 32 more
    <2007-04-12 12:13:03,577> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> ORABPEL-36333
    <2007-04-12 12:13:03,577> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>
    <2007-04-12 12:13:03,577> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Error while executing the rule session.
    <2007-04-12 12:13:03,577> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> The rule session ValidateAttendanceList:2510579 failed to execute.
    <2007-04-12 12:13:03,577> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:214)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1202)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:491)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.runtime.AttendanceCheckSOAPBinding_Tie.invoke_assertExecuteWatchStateless(AttendanceCheckSOAPBinding_Tie.java:60)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.bpel.services.rules.runtime.AttendanceCheckSOAPBinding_Tie.processingHook(AttendanceCheckSOAPBinding_Tie.java:451)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::>      at java.lang.Thread.run(Thread.java:595)
    <2007-04-12 12:13:03,578> <ERROR> <aqa_examiner_payments.collaxa.cube.services> <::> Caused by: ORABPEL-36334
    Has anyone experienced similar problems? Thanks in advance
    Dave

  • Update_Folio Service Fails with !csUnableToExecMethod,applyCachedChanges

    Hello All,
    I am unable to run Update_Folio Service through the custom code.
    I am getting the below error while running it. What could be the probable cause for this.
    intradoc.common.ServiceException: !csUnableToExecMethod,applyCachedChanges
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2071)
    at intradoc.server.Service.buildServiceException(Service.java:2207)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2201)
    at intradoc.server.Service.createServiceException(Service.java:2196)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:102)
    at intradoc.server.Service.doCodeEx(Service.java:532)
    at intradoc.server.Service.doCode(Service.java:504)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1622)
    at intradoc.server.Service.doAction(Service.java:476)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1439)
    at intradoc.server.Service.doActions(Service.java:471)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1305)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3813)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1185)
    at intradoc.server.Service.executeServiceEx(Service.java:3808)
    at intradoc.server.Service.executeService(Service.java:3792)
    at intradoc.server.Service.doSubService(Service.java:3707)
    at sun.reflect.GeneratedMethodAccessor151.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
    at intradoc.server.Service.doCodeEx(Service.java:549)
    at intradoc.server.Service.doCode(Service.java:504)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1622)
    at intradoc.server.Service.doAction(Service.java:476)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1439)
    at intradoc.server.Service.doActions(Service.java:471)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1371)
    at intradoc.server.Service.executeActions(Service.java:457)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:723)
    at intradoc.server.Service.doRequest(Service.java:1865)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
    at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1332)
    at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1678)
    at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:221)
    at sun.reflect.GeneratedMethodAccessor121.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
    at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1592)
    at idcservlet.IdcFilter.doFilter(IdcFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at folios.FolioEditor.applyEdit(FolioEditor.java:52)
    at folios.FolioHandler.applyCachedChanges(FolioHandler.java:661)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    In which Jar file can i find Class Folderhandler.class or FolioEditor.class ?
    Any hint or comment will help me resolve this problem.
    Thanks in Advance
    Dipesh

    Unfortunately, it is still not working.
    I have tried with adding ':' at the end of the call, even with ParentGUID as a additional parameter, although it should not be needed for removeContent operation.
    Also, as there is a possiblity to add parameter change_data0, related to item that should be removed from folio, I have tried the following:
    http://localhost/idc/idcplg?IdcService=UPDATE_FOLIO&dDocName=000019&RevisionSelectionMethod=LatestReleased&numChanges=1&change0=38:removeContent:84DC-4AD9-8681-8F8E:&change_data0=dID:16&IsJava=1
    specifying content item with ID=16 as one to be removed from folio (even this information is redudant, as node ID is already known).
    This call was not successfull either.
    Tnx for effort.
    Edited by: user7379736 on May 17, 2010 11:50 AM

Maybe you are looking for