Adobe Standard 8.1.1 with Multiple PDF's Open Reverts Focus
Currently running Adobe Standard 8.1.1 on a full patched WinXP SP2 computer. When opening multiple PDF's (the source of the documents do not seem to matter - ex. via Outlook attachment, on a local disk, on a network share, etc), the focus will automatically shift to the first opened document.
For example, I open Document1.pdf, and Adobe opens and displays everything properly. I switch back to Windows Explorer and open Document2.pdf, this document will show for a second or two, then Adobe will switch back to showing Document1.pdf in the foreground. Attempting to open Document3.pdf (while 1 & 2 are still open), Adobe will show Document3.pdf for a second, then it will throw Document1.pdf into the front focus.
This seems to happen regardless of the documents (have tried with several random PDF's, and they all generate the same behavior).
Has anyone else seen this behavior? Have any suggestions to narrow down why this is occurring?
Thanks.
I have not found a resolution. This still occurs for me, even after upgrading to 8.1.2 (also on several computers)
Anyone else have any insight?
Similar Messages
-
Adobe Standard 9 Freezes when working in PDF File.
System: Dell T3500 Xeon Processor with XP Pro 64-bit. 6Gb Ram. MS Office 2007. Mozilla Firefox and Thunderbird. Quickbooks Pro 2009. Adobe Standard 9. Linksys Network Magic software. Hardwired to Linksys WRT54G2 wireless router.
The only program that I am having trouble with is Acrobat. It will open just fine. It will open any PDF file ok. However, as soon as you put the cursor inside the PDF to scroll, open a different page, rescale, ANYTHING, Acrobat freezes. It remains frozen for up to 30 seconds. This happens EVERY time you try to do something to the PDF that is loaded. The file size of the PDF does not matter either. I have opened very small ones and very large ones. They all open fine but then freeze as soon as you try to do something with the file. It's not just Adobe that freezes! It actually locks up the entire computer!At the advice of my IT guy at work, I checked the Event Viewer. This is one of the messages I was getting:
The protocol handler Search.Mapi2Handler.1 cannot be loaded. Error description: Class not registered.
I did a search on it and went to
http://www.google.com/#hl=en&source=hp&q=The+protocol+handler+Search.Mapi2Handler.1+cannot +be+loaded.+Error+description%3A+Class+not+registered&btnG=Google+Search&aq=f&aqi=&oq=&fp= 7da014c016d00ed9
One of the posts says to go
http://www.microsoft.com/windows/products/winfamily/desktopsearch/choose/windowssearch4.ms px?tab=Install%20It
and install Windows Search 4.0.
Where I am still getting the original error above, Acrobat has started working correctly.
Now. Something else happened as well. Actually two things. First, when I opened Outlook this time, I got a pop-up that said something about RSS feeds - Yes, No, or Ask Me Later. I think I clicked on NO.
Now, Outlook is opening faster that ever before and Acrobat is working. -
VBA to save an Excelfile as pdfdocument with a pdf document open password
I use VBA and Adobe Acrobat PDFMaker to save Excel-files as pdfs.
The code I use works perfectly (see below). Which VBA-command is
necessary to add a Document Open Password to the pdf to open the pdf-file?
thank you in advance and
best regards
gauss
Sub xls_to_pdf()
Dim member As Variant
pdfZähler = 0
dieseDatei = ThisWorkbook.Path & "\" & Left(ThisWorkbook.Name, Len(ThisWorkbook.Name) - 4)
drucker = "Adobe PDF"
Sheets("Frontpage").Select: drucken_mergen
Sheets("Final").Select
For Each member In Range("regionen")
Range("A1").Value = member
Application.Calculate
drucken_mergen
Next member
End Sub
Sub drucken_mergen()
'drucken
Dim AdobeDistiller As ACRODISTXLib.PdfDistiller
Set AdobeDistiller = New ACRODISTXLib.PdfDistiller
If pdfZähler = 0 Then
file(0) = dieseDatei
Else
file(pdfZähler) = dieseDatei & Format(pdfZähler, "0000")
End If
ActiveSheet.PrintOut copies:=1, preview:=False, _
ActivePrinter:=drucker, printtofile:=True, printtofile:=True, _
prtofilename:=file(pdfZähler) & ".ps"
AdobeDistiller.FileToPDF file(pdfZähler) & ".ps", file(pdfZähler) & ".pdf", ""
Kill file(pdfZähler) & ".log"
Kill file(pdfZähler) & ".ps"
'mergen
Dim pdfZiel As AcroPDDoc
Dim pdfQuelle As AcroPDDoc
Set pdfZiel = CreateObject("AcroExch.PDDoc")
Set pdfQuelle = CreateObject("AcroExch.PDDoc")
If pdfZähler = 0 Then
pdfZiel.Open (file(pdfZähler) & ".pdf")
Else
pdfZiel.Open (file(0) & ".pdf")
pdfQuelle.Open (file(pdfZähler) & ".pdf")
pdfZiel.InsertPages pdfZiel.GetNumPages - 1, _
pdfQuelle, 0, pdfQuelle.GetNumPages, True
pdfQuelle.Close
pdfZiel.Save 1, file(0) & ".pdf"
Kill file(pdfZähler) & ".pdf"
End If
pdfZähler = pdfZähler + 1
End SubDear Irosenth
thank you for your answer! -
Multiple PDF's opening multiple windows instead of just one
I'm using 9.2. I'm opening multiple PDF files. They are all opening in separate windows. I would like them to all open in the same window and cannot find an option to make this selection. Is this possible in 9.2?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
With a PDF file open on iPad how can I ask Siri to go to a page number?
I have a PDF file open in iBooks on iPad. How do I ask Siri to go to a page in the file?
jake_powel wrote:
Thanks Bob. FYI Apple, would be a useful addition.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback -
Adobe Standard 6.1 Problems with links
Hyperlinks in pdf's don't work.
I have created a 9 page newsletter in Microsoft Word. Each page contains articles with various types of hperlinks. Most of these links contain a "click here" type instruction. In the first 6 pages the links work well. In the last 3 pages some links work but most don't. In the past the newsletter has gone well using this process until lately. Over the last month 4 staff have started having problems with these links when converting a Word document to a pdf using Adobe Acrobat 6.1. We re-installed the program on our pc's and the server and downloaded updates. One staff member uses 8.0 Professional and he had problems with the links this morning too. Our IT help desk people can't help us and we MUST get our newsletter onto our website today. Any suggestions would be extremely welcome.First, be sure you have updates to AA6.0.6, the lastest version of AA6. I have no idea about any AA6.1. How did you create the PDF? To get the links to work properly you need to use PDF Maker. Printing to PDF will allow links, but they are only those that Acrobat or Reader recognize as such and are not actually built in links. If you start getting into non-standard URLs that include spaces and punctuation, then Acrobat will not properly recognize the links.
-
Adobe Acrobat X shows artifacts with JPEG2000 PDF
Hi ,
I have a PDF which has a JPEG2000 compressed image inside it. When I view the image in Adobe Acrobat X it shows a lot of artifacts and noise. These artifacts are not present in the JPEG2000 image. Also if I open the PDF in another non-Adobe viewer the PDF appears clean without any of the artefacts. Can anyone please tell me if I can do something to see the image without artefacts in Acrobat?
Thanks,
ShamAs your question is about Acrobat and this is the Reader forum, you may be better off asking in the Acrobat forum:
http://forums.adobe.com/community/acrobat -
I converted multiple emails into a pdf file. After opening the pdf file, I wanted to combine the files into one pdf however once combining the files, the date modified of the files changes to the current date. How do I preserve the original dates of the emails when combining the files?
Hi Softball ,
Thank You for posting on the forums. Apparently there is no such feature that would help you to achieve this.
Thanks,
Vikrantt Singh -
Word doc combination with multiple PDF files
Any advice on how to combine a Word document with a number of PDF files that need to be embedded at various points in to the Word Document?
Hi,
To insert PDF files within Word file:
1. Open a Word file in MS Word(I am using 2010)
2. Click "Insert" tab
3. Click "Objects" in Text group
4. Click "Create from File" >Browse
5. Browse to your PDF file
6. Click "Open"
Hisami -
Can a pdf have problems when created with multiple PDF versions?
In our everyday workflow, we have PDFs created from different versions. Our main files are created as PDF v1.5, but then we might import pages created from another software that is v1.3, then we might scan and add a page that is created as v1.6. Has anyone noticed any issues with files created this way? I am troubleshooting some problem files and wonder if this could be contributing.
Thanks.Could possibly be an issue, but it likely depends on the features used. The major problem would be going from later versions to prior versions in terms of the version you open everything in. If you are using the latest version for the editing, I would not see why there would be a problem. Earlier versions of Acrobat may have problems with PDFs saved in later versions, but that can typically be fixed with Reduce File Size or the PDF Optimizer.
-
Acrobat 9.5.5 multiple .pdf files open without toolbars displaying
Recently, I noticed that, when I open one .pdf file, all toolbars I have selected as customized are displayed. But, upon opening additional ,pdf files, those files do not display my toolbars at the top - only the file menu shows up. If I try to close the limited toolbar files, I get the error "Adobe Acrobat 9.5 has stopped working," and the programs aborts. I've searched the web to no avail for a solution. My work requires I have multiple Adobe files open, but these additional files have extremely limited functionality without the toolbars.
Event Viewer indicates the following errors:
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Acrobat.dll
I'm running Win 7 Pro 64-bit, on Intel i7, with 14 GB RAM, 224GB SSD/68 GB free. My system should more than amply support the application.
My thought is a recent Adobe update or Windows update caused this anomaly. Has anyone else experienced this issue? Please advise - I'm desperate for a resolution. Thanks.
Message was edited by: psoberg
Update - when you select View -Toolbars on the additional files, all the customized toolbars are check-marked, so they should be displaying. But, they don't.Bill@VT,
Thank you for your reply. Your recommendation is not the issue for sure. I had tested by opening numerous files on my system, which I know are not secure. The first file opened with all toolbar functionality, and the rest of the files opened in limited view. These are files I've created and opened numerous times in the past with no issues, until recently.
I've since installed Adobe Pro XI Trial, as well as a couple other .pdf maker apps. I had already remove Adobe Pro 9.5.5, so I can't reinstall while I have XI on my system - the installation aborts. My assessment, after spending hours researching it, is that there's a conflict in my OS and 9.5.5. At this point, I have to cut my losses (time & billable hours) and move onto a more stable, dependable application. It's probably not going to be an Adobe product, sad to say. Too many issues, too little accessible and timely support.
I am grateful for your input in my scenario. Have a splendid day/evening! -
Acrobat stops working when multiple PDFs are opened together, is this a bug?
Not sure this is the correct thread but then none of the threads are obviously the correct place for this question. I am running W7 last updated a week ago so it should be running all the correct progs and drivers. Acrobat XI Pro is Version 11.0.10, I have thought about updating to DC but I'm about to transfer the progs to my portable as I travel widely and don't currently see the point.
I have just started to notice that if I drag a single file from file manager to an open Acrobat window it opens without error but when I highlight more than one file and drag them across they open, then while the final file is displaying itself on the screen Acrobat throws a wobbly and stops working. Is this a known bug? Happens every time I open 2 files. Windows has been restarted from scratch and it still happens. Happens whether I highlight the files in file manager then <right click> Open With Adobe Acrobat XI or whether I drag the files across to an open window. Happens whether Acrobat is already open or when it is closed. Happens with more than 2 files as well.
I have noticed that file manager does take a while to display a preview of the file when the preview pane is open and thought that it might be the preview pane that is causing problems. I then closed the preview pane and opened 3 files without a problem, then opened 8 files at the same time and the programme fell apart again. Could be to do with the Microsoft File Manager but I'm interested to know if this is a common problem or not? I did a search on file opening errors in the Acrobat forum without success so am assuming it is unusual.Thanks, seems to solve some of the problem, perhaps I need to uncheck more in this dialogue box... May be 'a' correct answer but not the complete solution. Anyway if all I need to do is uncheck a choice in a dialogue box then it must be a bug or driver incompatability as there seems to be no reason why I shouldn't be able to use 2D graphics acceleration.
Works if you highlight several PDFs in File Manager and then right click and 'Open with Adobe Acrobat', the error still occurs if I drag these files into an open instance of Acrobat beyond two files. Also seems to be more of a problem if one of the files is a 'colour document ' or 'greyscale document' scanned by Acrobat itself. -
I am working on a project for my Universities 125 year anniversary. Essentially I've created a 125 year long digital yearbook, with a link to the University's actual digital yearbook for each individual year. I'm wondering if there is a way that I can make all of the yearbook links open in the same second page.
IE: Main Project open in a window, when I click the 1939 Yearbook pdf hyperlink, the 1939pdf will open in the second window. I then want to find a way so that after this, on the main page, I can click the 1940 yearbook pdf link and have the 1940 yearbook load on the second window, replacing the 1939pdf, instead of just opening the 1940pdf on a third new tab/window?
Note: I have all of the yearbook PDF's online and downloaded, so I can make the hyperlink send you to the site, or do a download style thing.
Thank for any help, and if anyone needs further information just ask me!Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab? -
The cause of the need to revert to the last known good operating condition was trying to download a file from a Yahoo discussion group. The download froze the machine. When Firefox was restarted, it froze on loading, at first step of loading multiple windows and tabs. Many reboots to the same frozen state led to revert to the last restore point. That produced equivalent results on startup of Firefox, the option of F8 and revert to last known good operating condition was done. Everything seemingly operate OK, with the exception of the pop-up dialog boxes on shutdown of Firefox .
Began Thursday 5/26/11
I know locations and dates of all files "prefs.js" but don't know what to do with them, if anything.I removed add-on BetterPrivacy. No problems since then anymore.
Regards,
HABSBURGER -
Standard (application-based) firewall with one additional port open?
Lion and Snow Leopard both have application based firewalls. I want to allow access to a Minecraft server on port 25565 but I don't want to allow all of Java. How can I open one port in addition to leaving the standard firewall in place?
Hi
The Zone based firewall uses "inspect" statements, that's just what it does.
A simple zone-based firewall that will inspect all traffic going from the local network to the internet and protecting the outside interface of the router, but allowing anyconnect connections would look something like this:
ip access-list standard INSIDE-NETWORK_ACL
permit 192.168.1.0 255.255.255.0
class-map type inspect INSIDE-NETWORK_CMAP
match access-group name INSIDE-NETWORK_ACL
class-map type inspect HTTPS_CMAP
match protocol https
policy-map type inspect INSIDE-TO-OUTSIDE_PMAP
class type inspect INSIDE-NETWORK_CMAP
inspect
policy-map type inspect OUTSIDE-TO-SELF
class type inspect HTTPS_CMAP
pass
zone-pair security INSIDE-TO-OUTSIDE_ZP source INSIDE destination OUTISDE
service-policy type inspect INSIDE-TO-OUTSIDE_PMAP
zone-pair security OUTSIDE-TO-SELF_ZP source OUTSIDE destination self
service-policy type inspect OUTSIDE-TO-SELF
I haven't personally configured Zone Based Firewall with anyconnect. So if this doesn't work you can look at this link: https://supportforums.cisco.com/document/46481/anyconnect-ios-zone-based-firewall-zbfw
Maybe you are looking for
-
Hi I have transfred all of my i tunes library to an external hard drive attached to my pc, but when i go to play music from the transfered library, a message comes up on screen : can not find roiginal file , do you want to locate it. Can anyone help
-
I couldnt get online with my wifi on safari doesnt let any website to open
hey guys pls help i couldnt get onlin on my mc safari n firefox not working though wifi says m connected???? n do u guys know how to reboot the mac n not loose any data
-
Ichat 4... Keeps crashing when I try to Im someone
When I try to send an instant message to someone the instant message box comes up blank without the recipients name. Then I will try to click on the persons name to send a message Ichat crashes. I have deleted the 4 files in the library and have trie
-
Failed to load the following objects....
I sublassed some objects from an object library. They worked well for while. However, after I installed some other oracle software, I opened the form again I got error message: FRM-18108: Failed to load the following objects. Even I edited the subcla
-
Cpt 3 - quiz summary page falsely triggers 100% completion
I'm experiencing a problem - I've noticed the quiz summary page falsey triggers to the LMS that 100% of the slides are complete when they aren't. I'm using Captivate 3 and Sum Total. I have a standalone quiz that is part of a curriculum where the cur