Adobe Type Manager problem with Windows 7 and DIN font file extension not showing

I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer.
I need ATM to install the DIN font but am having no luck what so ever.
I can see the DIN font in my Dropbox but it is showing up like this:- ._DIN-bold, no file file extension. what am I doing wrong? is it Mac?

Adobe Type Manager absolutely cannot be installed on Windows 7. In fact, even attempting to install it may corrupt your operating system installation and its ability to properly render Type 1 and OpenType CFF fonts. The last version of Windows for which ATM was at all compatible was Windows XP, 32-bit only!
Adobe Type Manager is not at all necessary to install fonts, even Type 1 fonts, on Windows 7 systems. Right click on the font file for TrueType of OpenType CFF fonts or the .PFM file for Type 1 fonts and select the Install option.
The font file you are trying to install is for MacOS. It cannot be installed on Windows.
- Dov

Similar Messages

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

My website created with Iweb and hosted on mobileMe is not showing well on all computers. What could be the problem ?

My website created with Iweb and hosted on mobileMe is not uploading well on all computers. What could be the problem ?

I got a chance to look at it on a PC. Totally hosed up. It loads incorrectly then parts of it go blank.
I have a site that is based very much on one of the built-in templates and it works fine on the same PC. It contains only text boxes, image placeholders, and images with "picture frame" borders. Nothing fancy, no overlays, no extra code or anything. I haven't looked much at the other templates so I don't know if yours is mostly a template or how much you may have modified one or what tricks you may have done to get the look you wanted. Whatever it is, IE does not like it. Unfortunately, you can't really ignore them as was suggested; they make up a large part of your audience.

Adobe Prof 7 problems with Windows 7 - 64 bit

My laptop crashed and I just purchased a new comptuer with Windows 7 - 64 bit. Now have 2 problems with Adobe:
#1 When I right click on a web site to save as PDF, it won't work. There is no error, no response. Just doesn't do anything
#2 If I go to a web site requireing Adobe Flash Player Installer and I click to install it... nothing happens.
Please help!
Thanks Mary

Adobe Acrobat 7 surely isn't supported in Windows 7. Heck the newest version probably isn't either (I haven't checked).
That being said, right-clicking to save a file doesn't involve Acrobat and neither does installing Flash Player.

HP 15-n086sl problems with windows and drivers amd

Hello to all,
I have a problem with my HP 15 - n086sl .
With native Windows 8 did not.
the problem is the following :
moving from windows 8 to 8.1 I lose the switch graphics cards.
I mean : if I click with the mouse on "configure switchable graphics cards " I get out of a window that says " Unable to start Catalyst Control Center. currently there are no other settings to configure with CCC"
I tried to update the drivers with the ones on the HP site for windows 8.1 , but nothing changes .
From " Device Manager " I noticed that the drivers you have installed AUTOMATIC moving from windows 8 to 8.1 are the same version as on the hp website .
[url=http://postimg.org/image/t3xa7aem3/][img]http://s17.postimg.org/t3xa7aem3/driv.jpg[/img][/url]
If I install the drivers from the AMD website I have the following problems :
the switch returns to work but hibernation no longer works and if the screen of the PC goes into standby by moving the mouse or pressing both buttons it never recovers . I have to turn off the computer by holding down the button.
I've done several searches for the web, even within the forum but have not found the solution.
Will you help me ?
Sorry for my English.

Sorry for the delay!
I am Italian and hp does not offer more support than this forum.
How should I do?

Please help... Problems with windows and bluetooth

Hi,
My computer has been working without a hitch for the past 3 months but just recently i bought a bluetooth mouse to use with mac and windows. But then I noticed that there are some major issues now.
I have a Bluetooth devices icon in my control panel (actually two of them, i dont know how that happened) but in the device manager, there is no apple bluetooth kicker. No bluetooth hub at all. So I dont know if the driver actually installed or not.
Then, I try booting back up the macintosh drivers for windows cd to use the uninstall, but it can't uninstall. It only installs. I tried uninstalling through add or remove programs and it still just installs over again.
Please, somebody help me. I'm about to rip my MBP a new one.
Thanks,
Phong

Installed new boot camp drivers. Works perfectly now.

Having problems with Telugu and Chinese fonts

I am in the processes of finishing a DVD that is translated into several languages, including Telugu and Chinese. For both of these languages, I'm having problems getting some characters to render correctly. In Telugu, for example, I have instances of a single character that is rendering as two characters, though other characters are fine.
The font I'm using is the Gautami font that comes with Windows 7. It is reported by Windows as having an OpenType layout with TrueType outlines. Has anyone seen this sort of problem and solved it?

Thanks, though I don't want to have to pop for a font that may or may not work. It would be nice if Adobe could just fix the problem, since it stretches across almost all their apps. However, I discovered that Flex does render Telutu text correctly, however. It can be done, Adobe, because you've done it. So I wrote a little Flex app to read my subtitle file, walk through all of the subs and save them as png images along with a FAB image script. So now I can import that into Encore to get the subtitles to display correctly (my Telugu translator verified that they are all correct now) but I still have the problem with Telugu text in the menus.
I hope someone from Adobe is reading this and will feel properly embarrased by the following rant:
I'm about to use paint.net to render the Telugu text for my menus because Photoshop can't do it correctly, either! @_@
I also wrote a Flex app for editing and translating subtitles and converting from srt to the Encore format because Adobe can't be bothered with a some simple importing of industry standard subtitle formats! @__@
And while I'm on the subject, is there any possibility that Adobe might actually treat the process of creating DVDs as something other than a bone with little-to-no meat on it that it throws to its users?
I admit that I couldn't do my work without Photoshop, Premiere and After Effects, but sheesh! I don't really have the time to be writing software to make up for features that Adobe couldn't be bothered to include and struggle with Encore not rendering fonts correctly on top of it. I need to sleep at some point.
End of rant.

Problem with Finder and Menu Fonts (uppercase A)

Hello --
I'm having a problem with fonts. All the characters that appear under icons in the Finder or in the menu for any application appear as uppercase As with boxes around them. There appears to be one uppercase A for each character that should be there. If I click-pause-click to edit the filename in the Finder, the text appears normal during the duration of the change, and then reverts to uppercase A with a box around it again. All other operation of the computer is normal.
I was watching and downloading video files in iTunes when the problem appeared. When I pressed ESC to exit full-screen mode, the Finder said that my start-up disk was almost full, and I saw the font problem. Upon investigating, I discovered that my start-up disk was completely full (and the download had failed), so the first thing I did was move some video files to an external drive, which freed about 5 GB.
Since freeing the space, I've tried the following to fix it, in this order:
1. booted from Tiger CD to run Repair Disk from Disk Utility
2. rebooted from the boot hard drive to run Repair Disk Permissions from Disk Utility
3. run through Disk Warrior
4. created a test admin user and logged in as that user
5. removed font cache files using terminal
6. booted in safe mode, logged in as myself, and then rebooted normally
None of these actions has had any effect. The computer is still operating normally, except for the characters that don't display correctly.
I'm running 10.4.6 on a Titanium Powerbook 500 MHz with 512MB RAM. A few months ago, I replaced the internal hard drive with an 80GB Seagate.
Tibook 500 Mac OS X (10.4.6)

Hi again, zoobieboots —
I appreciate your initiating a new thread. Your post here helps to make the situation much clearer than in bmewolf's thread — particularly in terms of what you've already tried. Thanks again.
A few initial thoughts —
(a) As I was trying to suggest previously, you're apparently operating (after moving some files to an external drive) with ~6-10% (?) free disk space. Particularly given that you were working with large video files when this appeared, File fragmentation would be expected. While I haven't heard of this particular symptom resulting from fragmentation, that would be a concern to me — particularly since this immediately preceded the problematic behavior.
I've read some good reports about iDefrag, but haven't used it myself. A demo version is apparently available for HDs < 100GB. But you'd presumably need to free significantly more space first (you haven't actually said whether 5GB or ?? is the total available now). Having never experienced severe fragmentation, I don't fully understand its consequences — but another participant may be able to explain this.
<b>(b) You don't mention trying to troubleshoot potentially corrupt or incompatible fonts (or font caches), also as outlined in the other thread. As I suggested there, The X Lab's "undoing Font Book" FAQ is a useful resource in this.
(c) Although I agree it may be an unsatisfying "solution," an Archive & Install did work for bmewolf in the case that you've indicated matches yours closely.
I hope one of these suggestions is helpful. Please post back to discuss your progress.
Regards,
Dean

I didn't safely eject my external hard-drive and now my files are not showing up on my other computer?

I didn't safely eject my external hard-drive as my imac was in sleep mode and I thought it was shut-down. Now I have turned up to uni and plugged my hard-drive into the uni computers (apple) and the word document I was working on last night (before my computer went to sleep mode, and it may still have been open, I cant remember) is gone.....
I have phoned home and got a family member to try and recover the file. They said they can see it when they open Word under recent documents, however its "ghost" and nothing happens when you click on it.
My question is, when I go home and plug my hard-drive back into my imac, will I be able to recover this word file? or have I lost it forever?

I only saved it to my external hard-drive and saved it at the completion of working on it. However left the document open, went to dinner, and this morning pulled the hard-drive out, whilst the computer was asleep not shut-down and now the file doesn't appear.
I thought when I clicked save then it saved straight away, therefore anything i do after that point (ie a un safe ejection) shouldn't make a difference. Clearly, no matter if you saved the document, if you un-safely eject the hard-drive then the file is lost anyway?

Problem with windows and variable in smartform

hi guru,
i create smartform for printing tax document and found problem.
1)
i create layout in form like this.
       {Main Window}
               <<<< Data to print
       <<<< secondary Window
       <<<< secondary Window
with many data in table, so this form will take 10 page up to print. i found and showed in every page.
in my solution *i want to display and on last page after {Main Window} Only*. how to resolve this.
2) follow to 1st question, can i place position of each window in dynamic? +like 's position is under {Main Window} 2 cm.+ instead of specific position left margin , upper margin *or should i create other page and place and .*
3) i create 2 variables (sum1 type p , sum2 type p ) for keep sum of tax in table that show in each page and write it at end of each page. i want to clear data in these 2 variables when system create new page and start to keep sum of value again. i create program line node under {Main Window} after but don't know which code or syntax to write.how to code this?
regards,
Kittisak.

1) On the 'Conditions' tab of your WIndow3 & WIndow4 just click the check box
'Only After End of Main Window'. It will always be printed at the last after your main window is finished.
2) And if you don't want your window3 & window4 in a fixed place than instead of new windows do the same thing inside your main window creating a new template or anything as per your requirement and place it after your main table.
3) For clearing the fields, do it like this, in the program lines write the code below:
IF G_PAGE NE SFSY-PAGE. " declare g_page with initial value '0'
    CLEAR field1.
    CLEAR field2.
    G_PAGE = SFSY-PAGE.
ENDIF.
With luck,
Pritam.

Problem with KTV3 and PCI USB card extension from QTEC type 13068

Hello all,
I have been trying to make work a PCI USB card extension from QTEC type 13068. This card allows to give 4 USB ports more.
My problem is that oinly 2 ports are working and WINXP SP1 is saying that there are not enough ressources for all the PCI functions. However there is enough free IRQ. Even using this card alone on the mainboard give the same error.
I am using a KTV3 (MS-6712 VER:1.0A) and I have no idear why this is happening. Could it be a bad interaction between the BIOS and the card? wall Or WIN XP? angryfire
All comments and ideas to try are welcome especially from those who have this QTEC card.
Regards.

What operating system are you using? The card requires SP1 for XP and SP4 for 2000. If you have these, try to uninstal the cardl and let Windows reinstall the card on start-up.

Problems with Windows and Random Crashes

For the past two days I have been having tons of problems, since I finally got around to running the security update (2006-008). I've been having loads of random crashes, most commonly from Safari, Finder and iTunes. Safari crashes usually when I close a window or interact with certain flash things. It also fails to draw the window when I close the second-to-last tab (leaving one tab), giving me a big white square that I have to close. Otherwise, random window elements (such as bookmarks bar, address bar, etc.) will disappear at random, or will be horribly mis-sized.
Finder just quits whenever it wants, I have yet to find a common thread between crashes.
iTunes crashes usually when I play a video, but also sometimes when switching from the store to a playlist, or to the library. It also suffers occasional redraw problems similar to Safari, though not as bad. Garage Band does too.
Here's the output from the last iTunes crash, if it provides any clues:
EXCBADACCESS (0x0001)
KERNINVALIDADDRESS (0x0001) at 0xffffffff
Thread 0 Crashed:
0 GetPatternIdentifier + 211
1 SetPortPat + 103
2 BackPixPat + 42
3 DataEngine::ApplyBrush(TTheme*, short, unsigned char) + 76
4 SetThemeBackground + 836
5 SetThemeWindowBackground + 292
6 NewFeaturesDialog + 202
7 CreateDialog(Rect const*, unsigned char const*, unsigned char, short, OpaqueWindowPtr*, unsigned char, long, char**, ColorTable**, char**, char**, unsigned long, unsigned char, AutoPositionInfo) + 175
8 GetNewDialog + 173
9 0x1000 + 1686314
All of my crashes have been EXCBADACCESS (0x0001) ones.
Please help, as this is a nightmare to deal with.

That error usually comes up as a result of faulty RAM. Did you buy any chance upgrade the RAM in your iMac? If so, verify that the chip is seated properly and that it is supported for your iMac.

Preview : problem with PDF and Arial font

I receive PDF files from my telco; the PDF use the Arial font, which they embed in the PDF. Not an ideal choice, but I can't change this.
Problem : when I display the file in Preview (OS X 10.5.6), large parts of the text do not appear. The file can correctly be displayed with Adobe Reader on the same Mac, on other machines (Windows PC with various PDF viewers) or in GMail. The issue really seems to be related to the "Preview" application.
Any idea on what causes this? Are there limitations on the PDF files that Preview can display ?

Not necessarily! Because there are many places fonts can reside in Leopard, multiple versions of the same named font may be present. This is especially true for fonts that may come with multiple software installs like Arial (commonly installed by Microsoft Office). The system may not always choose the most recent font. It is a simple matter to check in Font Book for conflicts.
bd

Problem with Youtube and Flashplayer : some options are not responding anymore

I have a very strange problem since few days only on Youtube (other famous flashvideo websites are working without problem) I tried many things already without success.
I can still play videos on youtube, excepted the buttons under the player are not responding AT ALL. I can still see them but it's not responding (or for exemple when Im going on the youtube player "Sound" icon the bar volume doesn't appear)
I tried already to uninstall flashplayer and update it to the last version (10...38) but no changes. I have the same problems on all browers (IE; Firefox and Chrome). I also reset all Firefox and IE without success. Reinstall Java. And I have the last drivers for my graphic ard AMD.
Here is a few pics to show my problem :
You can see clearly that the button for resolution doesn't appear at all.
Picture of my youtube player :
on Firefox :
http://imageshack.us/photo/my-images/607/firefoxu.jpg/
on IE
http://imageshack.us/photo/my-images/225/29761205.jpg/
Quite strange also on IE you can see that there is a kind of bar who seems to block me the access to the control of the youtube player icons :
http://imageshack.us/photo/my-images/812/ie2q.jpg/
Im on Windows 7 64Bits, but i'm using the 32Bits version of Firefox and IE, I tried also to turn OFF my Avast Antivirus and my firewall. But no changes.
If anyone has an idea, i would really appreciate because even if i can still watch video, i cannot change the audio volume of it and change the resolution or even activate the google subtitles options. The only icons who are responding on the youtube players are the two on the right (to enlarge the screen).
Regards,
Yann

Yamoona wrote:
Here is a few pics to show my problem
Images are good to document a problem, butI don't see any images in your post. Use the camera icon to insert images into a post.

Adobe Type Manager problem with Windows 7 and DIN font file extension not showing

Similar Messages

Maybe you are looking for