Adobe Updater requires password when I launch any program from the suite

It is very annoying, but not a destructive issue.
When I launch any program from Creative Suite 3 Design Premium (6 programs) the Adobe Updater pops out and asks for a password. I can either provide a password and proceed, or deny the password and still proceed with the program.
Is there any way to stop the Updater from popping up?
I have it on my two machines Mac Pro (2x 2.66 GHz, 11GB RAM) and Mac Book Pro (2.33 GHz, 3GB RAM).
I am sure that there is some settings which I simply overlooked. Can anyone point it to me?
I would appreciate that. Thanks.
Jack

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Similar Messages

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the extension gallery. Appreciate any advice?

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the safari extension gallery. Appreciate any advice?

but i've not been able to install any programs from the safari extension gallery
In order to use the Safari Extensions Gallery you need to upgrade to Snow Leopard v10.6
See system requirements here: http://www.apple.com/safari/download/
If you want to upgrade to v10.6, make sure your Mac meet's Snow Leopard's - Technical Specifications
Purchasing available here > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)

TS1702 can not download any program from the App and I can not update any program downloaded in advance .. Seems to me just to wait and remain so throughout the day .. I want a solution to this problem

can not download any program from the App and I can not update any programdownloaded in advance .. Seems to me just to wait and remain so throughout the day .. I want a solution to this problem

Any solution!!!!!!!

Satellite A60: Can't open any programs from the CD Rom

I have a problem when trying to open any program from the CD rom, the computer runs a Windows Explorer message every time
which says there is a fault and has to close down. I have run the computer through every virus program going and i have all the Microsoft updates from there website. Has anyone got any further ideas what the problem could be.

Hi
Well, strange issue. Maybe its something wrong with the CD rom?
The best idea is to recover this unit with the delivered Recovery CD but firstly you can try to remove the CD rom device from the Device Manager. After OS booting the drive will be recognized again. If the problem persists after this procedure I would recommend to recover the unit.
Bye

[Solved] Launching Graphical Programs From The Terminal

Occasionally I launch graphical programs from the terminal and they usually spit out what they're doing in the background, I know you can send this output to /dev/null but is there a way to have that is the default setting (ex. not having to type &> /dev/null each time) and then somehow turn console output back on when I want to debug something? I tried creating an alias but that didn't work.
Last edited by brando56894 (2011-07-26 04:17:11)

brando56894 wrote:
I put it in my .bashrc and when I reload .bashrc I get this:
bash: /home/bran/.bashrc: line 12: syntax error near unexpected token `;'
bash: /home/bran/.bashrc: line 12: `no() { "$1"&>/dev/null & ;}'
Remove that '&' and try again. (remember to reload the .bashrc)
jasonwryan wrote:What, exactly, did you put in your .bashrc?
He used your function but with "my" '&' - w/o 'nohup'.
Last edited by karol (2011-07-26 04:25:55)

There in my iTunes account balance and I can not buy any program from the store I do not know what problem I would like to help me

There in my iTunes account balance and I can not buy any program from the store I do not know what problem I would like to help me

I agree with gnome up there, more info is needed about what's happening

Adobe Reader X closes when I press any key in the keyboard.

Hello,
I have recently updated my windows from xp to 7 and installed the latest version of adobe reader. Then I encountered a problem, after some time using my PC, Adobe Reader would close whenever I touched any key in my keyboard, but not on my mouse, so I could only view pdf files by moving around using the mouse, and loss funcionalities like searching for a word in the document, or saving it with a different name. The only way to solve this problem was to restart my PC, and then everything would be allright for a while, then the problem happened again. I uninstalled and installed Adobe again, however this problem persists, so I'm seeking help here.
There is another thread with the same problem here http://forums.adobe.com/thread/901383, however it's dead and no solution is presented.
Any help would be great, regards from Chle.

I answer myself, solution is here http://forums.adobe.com/message/3806894#3806894, it took me a while to find it though.

When opening a pinned program from the taskbar the programs opens in a new icon in the taskbar.

Hey
In some special occasions, I have the problem that when you press an pinned icon the program is not "grouped" with the pinned icon, but opens in a new icon, please see this image to better understand:
http://misc.norphf.dk/PinnedIcon.bmp
As you can see in the picture, the properties of both icons are alike
In this case I have manually changed the icon to add the "4twhpv3 dl", but I also have the problem with e.g. Active Directory Users and Computers 32BIT path "%windir%\SysWOW64\dsa.msc" it works with the normal ADUC started form "control panel" (I use the 32
bit version to get an extension to work).
Can someone help with this?
Regards Lars Mortensen

Doesn’t affect functionality?! - It sure does, with my Active Directory Users and Computers, which I have lying on win+7 every time I press win+7 it opens a
new window instead of using the currently opened, that’s not very functional....
But found a solution myself
If I create a shortcut, and changes this shortcut, places that shortcut on a local disk (Network locations/mapped drives doesn't work) then I can right click that
shortcut and "Pin to taskbar", then the program opens in the same icon and does not create a new.
Hopes this is understandable.

Air port always asks for password when a network is selected from the list

If I have my wirless router on before my mac, when i switch on my mac it connects fine, using the password I previously told it to remember. However if my mac is on first, then the router when I select the router in the wirless list it prompts for a password.
If I just switch the Airport on my mac off and on again it just connects fine. Is there a way to avoid having to swith airport off and on all the time?
This is only a problem on my Macbook 10.5.7, connection is fine all the time from my Mini 10.4.8
Thank you to anyone who can help

I have not asked same question many times in the same forum.
My previous question was very different from this
See the question;
http://forums.adobe.com/message/5775512

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

Try the offline installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
For Adobe Reader: http://get.adobe.com/reader/enterprise/

HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

Your admin account password.

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first update the application; when I try doing so from the App store, it says there are no updates available. I have not renamed or moved iPhoto which was preinstalled. How to solve?

When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first download the update; when I try doing so from the App store, it says there are no updates available. Stuck in a classis Catch-22 - any ideas how I might solve the problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

Adobe Updater requires password when I launch any program from the suite

Similar Messages

Maybe you are looking for