Adobe Videoconference problems with Vista

I have a Core 2 Duo with Home Vista and a broadband of 300 kb
but still I can't receive well a videoconference with Adobe Acrobat
Connet Professional. It makes stops the whole time. Is the
broadband to slow?

#1 try unplugging the card and plugging it back in.... if right vista should pick it up.. run as usual
well installation as usual..

Similar Messages

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Acrobat Problem with Vista X64 OLE calls

Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

Again, I contend that something changed between 8.1.2 and 8.1.3.
refer to http://www.adobeforums.com/webx/.59b6fe7c
To show the viewer, use the show method after the document is opened.
In 8.1.2 you did not have to perform this extra step.

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Flash player 11 problem with vista 64-bit

Firefox browser 64-bit, I think
OS - Vista Home Premium - 64-bit
Adobe flash player 11 does not work with the 64-bit version of vista (it's a fact)
Can I download a 32-bit version of FP 11 on my 64 bit version of Vista?
Can I try loading a 32-bit version of firefox and then download the 32 bit version of FP11?
How do I get to a 32-bit version of firefox to download it?
How can I get to a previous version of flash player - 10.3?
What is wrong with Adobe that they make a flash player that will not work with Vista or XP 64-bit OS?
Most of the videos no longer play - just get a message that the video is no longer available - problem started when I downloaded FP 11

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

Problems with Vista/JRE 6

I have Java RTE 6, Version 3 on my computer but websites do not recognize it
and it's not even in my program toolbar. I went to get the firefox plugin
from the Java website and while it was testing my JRE, it couldn't find it on
my system. So, I go to install it and it says its already been installed. I
have reinstalled this about 3 times and still nothing when I get to java
websites. It's just a white screen where the java applet is supposed to be
running. I've tried on IE also and it doesn't work there either.
Very frustrating....can anyone help?

I also have a similar problem--compability problem with JRE6.interfers with display driver somehow have reached this conclusion by the process of elemationmy computer is a new HP and has been to their shop for repairs 4, get that, 4 times--HP has been unable to find a solution, microsoft doesnt have one and intel (intel 945G) says i have a software problem i have disabled java and havent had this problem--i have uninstalled and reinstalled - doesn't help situation at all-- i have searched all help centers i could find--no info- latest entry (upon last installation) in my problems and solution program was compatibilty problems with no solutions--i am running vista home basic,have 2GB Kingston memory modules installed-don't know what else to tell you-PC just returned from HP repair shop, they ran all stress tests and everything checked out ok-thanks

Adobe forms - problem with the character "9"

I have the problem with printing Adobe forms that were introduced with Russian country version.
Funny enough I have no problems with russian characters. They all print all right.
We have however the problem with character "9". On the preview of the pdf it looks ok. When I print it from PDF preview it prints ok. But when I process it for sap to the HP output device (device type HPLJ4) "9" gets replaced with "<".
Has anyone experienced this problem?

ok, you're right. But, my problem is a little bit different :
I would like to replace the "\n" character (new line) by the 2 characters "\n".
I test this source code :
String tmp = "First line\nSecond line";
tmp.replaceAll("\n", "\u005C\u005Cn");
System.out.println(tmp);
tmp.replaceAll("\n", "\\n");
System.out.println(tmp);
tmp.replaceAll("\n", "\\\\n");
System.out.println(tmp);
The 3 results are the same :
First line
Second line
I never have "First line\nSecond line".
Best regards.
K96
PS : The objective is to write the string in a SQL request.

Problems with Vista Drivers on Satellite M100 (PSMA1E)

Hello,
I got Problems with installing the Vista Driver for the Graphic Card and the Realtek Sound Card.
I downloaded the Drivers from the Toshiba-Support Side! The Realtek Driver couldnt be installed because of some missing file! The CCC wouldnt run correct after installation! I got Vista Buisness!
Greets, kalest

I fixed the Sound Problem for myself:
The Realtek Site offers drivers for the HD-Soundchip. I installed them and now i got HD Support on Vista!
The Problem with the Cata.Control Center still exists!
Greets, kalest

Problems with Vista Contacts (partner problems :P)

I don't think I had any problems with the previous version of Nokia PC Suite to transfer my Vista Contacts. But that version did not support pictures (which I really wanted to have). So I upgraded to 6.83.14.1 which supports pictures. Though first of all pictures seems to be kind of buggy and refuses to transfer the contact if the photo is too big (have no idea if it's dimensions or size though).
But my prime problem is that it refuses to transfer some of my contacts. I tried to find some connection between those that didn't transfer and found that all of them seems to be couples where only one of the partners transferred. They have the same address etc. (though mobile numbers can differ). But strangest is that my parents have both been transferred (and they to share everything except mobile phone numbers). Oh, and all have pictures too.
Does anyone have any ideas how to solve this? Any help is appreciated.

hi. i had the same. but try this (works with me):-
open pc suite, synchronisation, then click settings.
pc application click create new, then instead of vista select "outlook express (windows address book) " then next page select default.
this should do it for some reason. now ALL my contacts have synched instead of half of them.

New iTunes, same sync problems with Vista

Hi
I got really excited when I saw in the fixes for the latest iTunes 8.1 for Windows that they had fixed sync problems with iPhones. They haven't!
On Vista Ultimate the sync has always been a problem, with either OutlookSyncClient or AppleMobileSync (or both) frequently crashing. With the previous couple of versions of iTunes, in my case, it has happened every third or fourth sync. Now with the new version it is almost every sync. It took me five disconnect and reconnect attempts and a couple of reboots to succcessfully sync this morning.
I've tried every fix I can find on line. I read that the Outlook sync problem was caused by an incompatibility with pst files that were not unicode. Oddly, I wasn't supposed to be able to sync with an old pst at all, but it did work erratically. Converting my pst to unicode didn't make any difference.
With the AppleMobileSync problem, I read that completely removing all Apple software in a particular order, restarting each time between removals, then clean reinstalling, should solve the problem. It didn't.
Now the problem is even worse and I'm at my wits end on it. Come on Apple, get a grip!
If anyone can shed any light on this I would be really grateful!
Tim P

Hi
I got really excited when I saw in the fixes for the latest iTunes 8.1 for Windows that they had fixed sync problems with iPhones. They haven't!
On Vista Ultimate the sync has always been a problem, with either OutlookSyncClient or AppleMobileSync (or both) frequently crashing. With the previous couple of versions of iTunes, in my case, it has happened every third or fourth sync. Now with the new version it is almost every sync. It took me five disconnect and reconnect attempts and a couple of reboots to succcessfully sync this morning.
I've tried every fix I can find on line. I read that the Outlook sync problem was caused by an incompatibility with pst files that were not unicode. Oddly, I wasn't supposed to be able to sync with an old pst at all, but it did work erratically. Converting my pst to unicode didn't make any difference.
With the AppleMobileSync problem, I read that completely removing all Apple software in a particular order, restarting each time between removals, then clean reinstalling, should solve the problem. It didn't.
Now the problem is even worse and I'm at my wits end on it. Come on Apple, get a grip!
If anyone can shed any light on this I would be really grateful!
Tim P

Airport Express problems with Vista

I have read on here that people are running the express with Vista an I am not sure how? I loaded the disk and everything come up but the Airport setup assistant. When I open the Airport asmin utility it is blank. I am not sure how to get this up and running any help is appriciated.

I have the exact same problem trying to connect my Airport Express to my Vista laptop. I managed to get around it by using the Admin Utility, choosing "Other..." and then entering the router IP (for me 10.0.1.1) and password "public".
However after I have enabled WPA2 Security the connection does not work that good. After a short while throughput is degraded and then it drops the connection completely.
Is Airport Express supposed to work with Vista or what am I doing wrong?
HP Pavillion Vista Other OS

Compaq presario problems with vista

Hello, I am having major problems with our compaq presario sr5233wn desktop, os windows vista home premium. It started shutting down about ten days ago randomly, then started with a blue screenthat has displayed different messages... I have completed 6 different restore points and this didn't work... I then backed up my personal files and performed a complete system recovery installed on the pc...it worked great for about half an hour then the freaded blue screen popped up and I had to shut it down...i did this three times to no avail...then I did a complete recovery from the two discs I made shortly after purchase...that has not worked either...does anyone out there have a fix for this..I need my ole puter.
Thanks Elmer

Hi Elmer,
Sounds like the first thing you need to do is test for a hardware failure. Check out Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows Vista) and since it sounds like you are having problems running Windows for very long, skip to the bottom to the section called Using Hardware Diagnostic Tools when Windows does not open. Run the tests and report back what you find, if anything fails then there is probably a hardware component that needs replaced, possible culprits include the memory or the hard drive based on the symptoms you are describing. If everything passes, post that back as well, and let us know, and we can look for other causes of your problems.
Good Luck!
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Sound problems with vista 32 bit on xfi xtremegamer

hi im havin sound issues with my sound blaster xfi fatality xtremegamer on vista 32 bit. the sound will sound like a skippin cd or sound like it is stuterin for a few seconds than it will play fine than do it again later on. i was wounderin if its a driver issue with vista or my sound card has broke? i had it runnin on xp and had no problems. can anyone help me please as my card is only abot 8 months old so if it could be faltiy i am still covered by warrinty.

I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

Adobe Videoconference problems with Vista

Similar Messages

Maybe you are looking for