Adobe viewer / build help

Can I test an app (for ipad) without buying the 395 subscription? I need to convince our executive director that this is what we need before she drops 400.
I've built the test file, uploaded to the folio producer, went through the viewer builder process with devID provisions, and now it's asking me for a serial number.
Is there no way to just test the app, on the ipad, without buying the 400.00 product?
Thanks

I haven't read the Single Edition license agreement, but I believe you can make minor updates to fix typos and URLs and that kind of thing, but you can't make big changes such as swapping out the Spring catalog with Summer catalog content. Again, you should read the agreement to confirm.

Similar Messages

  • Adobe Viewer Builder 1.9.0 error to install iOS 5.1 at iPad2

    Hi,
    I generate an viewer builder using 1.9.0 but i can't install it on 2 iPad 2 with iOS 5.1, In iOS 5.1 it always shows "iTunes Sync - [app name] failed to install".
    I added UDID of both iPad2 in the mobile provision file before generating the ipa file, I tried to install it thru Safari or iTunes but both failed.
    But I can install this ipa file on iPad1 with IOS 4.2. Someone had same problem?
    Regards,
    App developer

    Did you include the device's UDID in the mobile provision file?

  • Does Viewer Builder's Bundle ID and Apple's SKU need to be the same?

    I'm working with Adobe Viewer Builder and iTunes Connect and I've realized my Bundle ID and apple SKU (com.example.example) are not the same. Will this create a problem when I submit the app to apple? And is there an easy way to edit and change the Bundle ID in Viewer Builder?
    If this is a problem, how do I delete the app from Viewer Builder? The delete button in Viewer Builder in inactive, I can't press it. I've unpublished the folio from folio producer but I can't seem to remove my app from Viewer Builder.

    The Bundle ID is generated automatically when you create the App ID on the Apple developer side. For each app you create, you need to use the iOS Provisioning Portal to create a new App ID. Then, after you create the app using Viewer Builder, you use iTunes Connect to start the app submission process.
    Unpublishing folio will not remove/delete your build in viewer builder. If you have Professional or Enterprise edition you can edit your build by clicking on Edit button in viewer builder.

  • How do i test my magazine for free using the current viewer builder?

    I downloaded  the adobe viewer builder, and i entered all my license's. I get to the activation page. Then it ask me to purchase a serial number. When it brings me to the
    site, it prompts me to purchase something for $400.00.
    I just want to test, for free... How do i do that?

    Thanks Bob!
    I think thats insane considering  the adobe content viewer doesnt work on the ipad with the current DPS folios.
    Is there any other alternative?
    Would it be better just to use the xcode apple ap?
    Thanks
    - Joe

  • Content viewer is alright, viewer builder not!

    Hi guys,
    I mangaed to pretty much finalize my project in iPad. However the application is fine while I check via adobe content viewer in my iPad but once I try to try "test view" in Adobe viewer builder, it just shows a black page on my ipad.
    Does anyone know what the problem can be?
    Much appreciated...
    Calvin Mousavi
    [email protected]

    Despends what you've done. Is the page fully interactive? If so, what type of overlay is it? Is it nested? If so, what's nested in it?
    Thanks
    Rob

  • HELP! Viewer builder won't accept my adobe ID!

    I'm using the same Adobe ID (which is the only one that I've used since the beginning of the process) to open the viewer builder and everything in DPS and this screen won't accept it. Is this a common issue? I already uninstalled it and installed it again and it doesn't seem to budge.
    I'm really desperate, since I need to have this uploaded ASAP.
    Any pointers? I appreciate your collaboration.
    thanks!
    -d

    http://forums.adobe.com/message/4445995#4445995

  • Problem with "small black line in right margin" with Folio Builder / Adobe Viewer in Ipad. Id CC.

    Hi there,
    When I create a Folio Builder and I check my Id project in the Adobe Viewer (It happens in the Ipad App and in the Desktop Viewer), I can see a black line in the right margin (maybe 4 px). And I can't adjust my background (It's an object with a colour) to use the "full resolution available for the app in the ipad", and yes, I'm using rules and I can see that my background object it's 1024 x 768. I have tryed several projects and upgraded the project to the "30 version".
    But I'm a new user with ID/DPS. So, is this a reported bug? Or I'm doing sth wrong?
    And for me, the most important question, will this problem be solved when I send my project to the applestore and DPS transform my Folio to the Store? Or what I see now it's what I will see?
    Thanks!

    Sorry! I have found an answer here in the discussion:
    http://forums.adobe.com/message/5835960#5835960
    So, the problem will be solved in the final app, and it's just the scroll in the Viewer.
    Thanks!

  • The "File Edit View Window Help" menu disappears after opening Adobe Acrobat X Standard

    After installing Adobe Acrobat X Standard, when I run the program the "File Edit View Window Help" menu is visible for only a brief second then disappears.  I tried to press F11 or other functions keys to bring it back.  I also installed Adobe Acrobat X Pro which I also have a license for and it would do the exact same thing. Reinstalling the programs did not seem to resolve the problem.  Is there an issue inside the registry?

    Thank you for your comment.  However, F9 does not seem to work.
    When I press F9, the menu bar appears but the words "File Edit View Window Help" are still missing.  
    When I press F9 again the menu bar will close.
    This is a screen capture before the words "File Edit View Window Help" disappear.  After only about a second they are gone.

  • Help : installer has detected one or more adobe coldfusion builder plugins

    I uninstalled coldfusion builder from flash builder and then when re-install I get a  message:
    installer has detected one or more adobe coldfusion builder plugins  ....etc
    How do I fix this?

    As a caution to save your time please follow the following release note:
    82284 -   If you install ColdFusion Builder as a plug-in to Flash Builder and decide to uninstall ColdFusion Builder, make sure ColdFusion perspective is not active in Flash Builder. Failing which, some features may not work after restarting Flash Builder or ColdFusion Builder's perspective will not come up if installed again.
    I did the wrong thing here and I can't ever get coldfusion to reappear after unstalling into FB

  • Text is pixelated in Adobe Viewer when creating an app in indesign

    I am trying to create an app in indesign, I put the docuement in the folio builder, and then view it on my iphone through Adobe Viewer.  The text that I've typed in directly in indesign appears pixelated, along with any thing I placed from photoshop.  In Indesign I've made the object High Quality Display, took out all layers except the text layer, even saved the photoshop text image as a pdf and placed it in indesign, still pixelated.
    Help please.

    Thanks Neil, I did all 3 as per your suggestion: version 25, PDF, and 960*640, and it worked.  But b/c of the PDF option, I believe that was the reason why each page opened up from blurry to clear, which is actually a cool looking effect, however, on some legnthy text frames, the blur took a bit too long to clear.
    So I created another folio, version 25, 960*640 and this time kept it Automatic, and it's just as clear as the PDF folio, but there's no initial blur.

  • No Folio File field in Viewer Builder?

    For some reason I do not have a field to associate a folio file to a viewer in the Viewer Builder. This greatly impairs the user experience.
    I'm using Indesign 5.5, have downloaded the most recent updates from the DPS site and have cleared the cache of my browser. I've also released an app in pre-release but this is the first one in the new interface.
    The documentation in the DPS help section references the Folio File field in the Basic Settings panel of Viewer Builder but I've navigated through the Viewer Builder and see no place to actually designate the folio to be built into the viewer. What am I missing?
    I can see where folios published to the account will automatically populate the viewer and from a developer standpoint maybe there isn't a need to associate a specific file to build and release the viewer itself, but the app for this viewer (that was successfully built in the DPS VB with confirmation as completed) was rejected by Apple because from their point of view it's an app with no content (no actual folio files for an end user to look at.)
    Thanks!

    Thanks for the response Bob.
    Yes, multi-folio viewer is what I need for a series of digital magazines. Sorry, in pre-release the multi-folio viewer was built and pointed to a folio file as with a single viewer. The new release is fantastic, I'm not nostalgic. Just trying to troubleshoot.
    After your post I assumed then that the viewer must automatically read what's been published and auto-populate the viewer. The problem was that I wasn't seeing the folio in the viewer on my ipad (loaded with iPhone Config Utility) but was seeing it through the generic Adobe Viewer. I checked certificates, settings, etc. in the viewer and everything checked out fine. I then went through publishing options.
    What I found was that when the folio is set to free, it is viewable in the custom viewer we've created. When it is set to retail (we are planning on selling this issue) it is not. Has anyone else experienced this? Have I configured soemthing wrong? I re-checked documentation and don't see any additional settings needed for retail release. Is the viewer expecting some additional info from the App Store to process the display icon of the folio for purchase?

  • Webcam and Whiteboard not working with Adobe AIR with Adobe Flash Builder

    Hi,
    I am trying to build a  simple chat service using Adobe Flash Builder target for desktop AIR( my final objective is to port it to android). My adobe AIR version is 2.5.0 and below is my source code:
    <?xml version="1.0" encoding="utf-8"?>
    <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
       xmlns:s="library://ns.adobe.com/flex/spark"
       xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:rtc="http://ns.adobe.com/rtc">
    <fx:Declarations>
    <!-- Place non-visual elements (e.g., services, value objects) here -->
    <rtc:AdobeHSAuthenticator id="auth" userName="Yy" protocol="rtmfp"/>
    </fx:Declarations>
    <rtc:ConnectSessionContainer id="session" authenticator="{auth}" roomURL="https://collaboration.adobelivecycle.com/yytan1987/myfirstroom" width="100%" height="100%">
    <mx:HBox width="100%" height="100%">
    <mx:VBox width="25%" height="100%">
    <rtc:WebCamera width="100%" height="50%"/>
    <rtc:SimpleChat width="100%" height="50%"/>
    </mx:VBox>
    <rtc:SharedWhiteBoard width="75%" height="100%"/>
    </mx:HBox>
    </rtc:ConnectSessionContainer>
    </s:WindowedApplication>
    Basically when i debug it with AIR, the chat is working properly but the webcam and whiteboard just don't work....I really don't know what's wrong with it already...Appreciate it if anyone can help,thanks!!
    Regards

    Hi,
    My take is , is your autopromote tuned on for the room. I mean whats
    your user role when an user enters the room(who is not host), is it 10
    or 50. If its 10 i.e. viewer , then he cant use his own cam etc. You
    need to take a look at the logs when an user enters and if its 10 and
    you want to give him these permissions, turn autopromote on from the
    devconsole for the room to make his role 50 i.e. publisher.
    I just now downloaded 2.5.1 AIR and created a new project with your
    source and I am able to use everything.
    Thanks
    Hironmay Basu

  • When will Adobe Flash Builder 4.6 support iOS 5.1 and the retina display?

    I have installed Adobe Flash Builder 4.6 along with the Adobe AIR 3.3 SDK and am understanding that there isn't support for iOS 5.1 nor the Retina display devices, is this correct?  If so, when will this be available?  If not, what is a good workaround?
    Thanks,
    N.M.

    note sure if I'm much help other than to CONFIRM it is working for me by using the sdk WITHOUT the compiler. Check out adobe's little note: "Note : Flex users will need to download the original AIR SDK without the new compiler."
    I am using FB 4.7 with AIR 3.6 and seems to compile correctly for iOS.
    Maybe try reinstalling flash builder?
    I honestly don't know if the JRE has anything to do with it... I'm using 1.7 ....to see what JRE you're using, open the Java Control Panel (I right click my java orange icon and hit properties), select the Java tab, then hit "View..."

  • IPad Adobe Viewer Update?

    I have just installed all the updates on indesign (folio tools) but now when I go onto the iPad to test it, I get a message saying go to the appstore to update? I have been to the app store and no updates are available, unistalled and re-installed still nothing?
    Help?

    I've had previous cases like that .. we do have some instructions to revert to older tools and basically re-publish the folio so that it is compatible with your viewer: see http://kb2.adobe.com/cps/917/cpsid_91785.html
    Also note the new Viewer Builder allows you to create a compatible Adobe Content Viewer. By doing this, users don’t have to wait for Apple or other marketplaces to approve our new Adobe Content Viewer in order to preview content that has not yet been published, or is published as private for testing.

  • Viewer Builder update does not install

    The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install.  After downloading and removing Viewer Builder from the Applications folder, this update does not install.
    Steps:
    - Removed Viewer Builder app from Applications folder
    - Download update from Adobe Site
    - Click to install
    - Opens package and performed some kind of install activity. There are no prompts and quickly finishes
    - No Viewer Builder installed.
    Any insights on to this would definitely help.
    Adobe DPS on MacOS Lion

    upgrade folio builder tools does not work..
    this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
    this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
    2 days ago, I tried it on an other machine and it worked fine....
    regards..Anne

Maybe you are looking for

  • Files disappearing from mounted .DMG files

    Hi, I've had this issue occur a few times in Tiger and I'd like to know if anyone else has experienced this and if there's a known workaround. Sometimes, when browsing a disk image, or, less commonly, a physical disc like a CD, files in the Finder wi

  • Can i tranfer contacts from one apple id to another

    Is it possible to transfer info from one ios device to an iphone 5 with different apple ids.(old iphone4 to iphone5).

  • 3G iPod loses all of its settings if untouched for a day or more

    I have a 15GB third generation iPod that works fine except for one thing -- when I let it sit for about 36 hours and it goes into "deep sleep" mode, it loses all of its settings and it asks me to choose a language when I press a button to turn it bac

  • About label Oracle Map Builder

    Hello! I have a question about Oracle Map Builder. There are three layers in basemap: the first - a polyline, the second - a point, and the third - a polygon with a solid color (top). Labels are included to the first two signatures. While viewing the

  • Java.util.set: problem with duplicate keys

    Hello, everybody, i have implemented a custom class C with its own equals()-method. I have two instances I1 and I2 of C with I1.equals(I2) = true if I add I1 and I2 to a set Set S = new HashSet(); S.add(I1); S.add(I2); there are two elements I1 and I