Adobe Volume lowers itself in mixer

This happens when listening to a radio station stream, Pandora, and other sites as well.  I will be listening at normal volume, and it will lower the volume of just the adobe flash player in the volume mixer.  I have even seen it where i turn it back up, and it immediately goes right back down, as well as not even being near the computer and it lowers itself. 
I have updated to the lastest version of flash player, and cleared the cache in firefox.  The only thing that seems to help is to reboot my computer, and that seems to fix it for a few days. 
I have noticed this on multiple computers as well, so i do not believe it is a problem with any installations. 
also, in the volume mixer under adobe flash player, it shows 2 volume levels sometimes  one is at the normal level, but when it adjusts itself, a grey out indicator appears at the normal volume, and the actual slider goes down to 1.  I can click on the greyed out indicator to return to the normal/previous volume.  None of the other volume sliders have this, and i cannot find a way to remove the "memory" slider/
here is a pic:  the bottom slider is where it lowers itself to automatically at random

My 1st gen iphone is up to the same antics. Pre 2.0 all was perfect. Then then update... During calls, if you adjust the volume for either the iphone earpiece, speaker phone, or bluetooth headset (I'm using the Plantronics voyager 520, which was purchased at the apple store), the ringer volume gets adjusted as well.
Just go into the sounds option under settings, make a call, and watch in awe as you adjust your call volume and ringer volume at the same time.
I've missed calls b/c the volume resets it self to a lower (random) setting. Now I must check after every call. The best part is if you push up on your volume button while at the home screen (the ringer volume pop up appears) and note that you have it on the highest setting, go ahead and check the sound option under settings. It will be at some random lower level. Oh my phone never did this on 1.4. I do hope the engineers are reading this and release a fix ASAP. The main purpose of the iPhone is to be a phone. Missing calls due to a low ringer volume is crazy.

Similar Messages

  • The volume icon on my ipod won't disappear and the volume sets itself at full.

    The volume icon on my ipod touch won't disappear and the volume sets itself at full. I have tried a master reset etc, but it doesn't want to cooperate. Any ideas?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod
    If you still have a problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    I do not know what a "master reset" is.

  • Adobe has upgraded itself (now red) relates very slow at best,locks up and just does not work.Is the

    Adobe has upgraded itself( now red prompts ) and it operates very slow at best. it also locks up. Can I go back to old version or is there a fix?

    Seem to have one more issue, when in documents and wish to move document to a folder. If I am require to scroll down to find a folder adobe closes on its own. Do you have any thoughts on this issue/
    REGARDS

  • Adobe Reader closes itself automatically

    I am using Windows 8.1, Word 2010 and Adobe Reader X. Any time a Word document is opene at the same time the Adobe reader closes itself automatically once the mouse cursor hits the Reader document. What can I do?

    Hi,
    I would say you are definitely coming up against memory restrictions. There are a couple of posts by John Brinkman that I would recommend.
    First I would look at why the form is 6Mb and see if you can reduce this down. For example, select fonts that are already in Reader (like Myriad Pro) and then deselect Embed Fonts in the File > Form Properties > Save Options. Also do not embed images into the form. See:
    http://blogs.adobe.com/formfeed/2010/02/big_and_complex_forms.html.
    http://blogs.adobe.com/formfeed/2010/09/xdp-size-matters.html.
    http://blogs.adobe.com/formfeed/2009/11/linked_vs_embedded_template_im.html.
    Next look at your script. You mention loops, so check is your script efficient. For example, use xfa.resolveNodes() once outside of the loop, instead of xfa.resolveNode() inside the loop. Make sure that variables are declared. See:
    http://blogs.adobe.com/formfeed/2011/10/script-performance-exercise.html.
    http://assure.ly/kUP02y.
    Also check for any script that you have in events that fire frequently, like layout:ready event and comment these out. See.
    http://assure.ly/nB0Bvz.
    The dataset seems very large at 2Mb. Does this include image data? It may be that the user is interacting with the form, while it is still trying to process the XML and the loops.
    Hope that helps,
    Niall

  • I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Can anyone help me find out if its a hardware problem???

    I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???

    Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
    This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
    You can always contact Apple and setup service through Express Lane.

  • Why does my iPhone 4S turns the volume by itself?

    My iPhone turns the volume by itself without me turning the volume everyday can you please help me

    Basics from the manual are restart, reset, restore from backup, restore as a new device.  Go through each step in succession until your issue is resolved.

  • Spotify is changing its volume by itself.

    This issue has been driving me crazy for weeks. I'll be listening to music in my car, on my headphones in the house, or wherever else, and Spotify is lowering its volume slightly down (a noticable amount) and then raising it back up after 15ish seconds, AND KEEPS DOING IT. This is REALLY annoying. I just want to listen to my music at a stable volume with no fluctuations. If I need the volume lowered, I'll do it myself. If someone can please tell me how I fix this I would be grateful because I cannot find a solid answer that actually fixes the problem on the internet.

    Si tenéis un problema iros olvidando de que el servicio técnico os lo solucione, ya que son literalmente unos sinvergüenzas. El otro día pague para tener una cuenta premiun y aunque me cobraron el dinero los de Spotify no quisieron darme la cuenta premiun. Es realmente una vergüenza como me atendieron y que a pesar de darle todos los datos me han ignorado durante días y aun no me responden con tal de no darme o mi dinero o la cuenta premiun.Un saludo a todos

  • Low volume recording audio w/ mixer

    I have a Behringer UB1204- PRO mixer and I am trying to record vocals with that, but I can only record and get playback at a very quiet volume. I'm a bit of a novice when it comes to recordng audio, but I have my phantom power on, it records fine, but I wanted to know how to turn it up because I can barely hear my vocals. My main mix sliders are up, the levels are green/yellow and I can still barely hear anything. Anything who is recording with a mixer and not a dedicated seperate preamp, can you help me out?

    Keith Do, "Low volume recording audio w/ mixer" #2, 01:19am Sep 26, 2005 CDT
    Is that going to affect the vocal quality if my trim is almost at the max?
    it can, but that depends on the input. Use your ears.
    OK, well the other thing is to look at the input attenuation on your audio interface. In most cases it should be -10dB (consumer)

  • ITunes volume changes itself / Can't Force Quit.

    My iTunes volume changed itself to a third of the way up, and now I can't change it. If I move the volume slider it just automatically goes back to where it was. I also can't force quit iTunes! It even won't let me shut down because of it. Any ideas?

    Open Activity Monitor in Application/Utilities. You can monitor your applications there to see how much CPU or real memory they are using. Selecting the CPU column will sort the highest on top for easy viewing. You can also force quit an application in Activity Monitor.
    Another option to Force quit is to use the commands. Command-Option-Esc. This brings up a Force Quit window.
    Since the symptoms affect many applications, I would first download and install the latest Apple combo updater. They install over the same version and will go back and refresh all files unlike an incremental updater that only adds new files. If the combo doesn't work, you might need to do an "Archive & Install".
    Mac OS X 10.5.8 Combo Update (For both PowerPC- and Intel-based Macs )
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate

  • Adobe Volume Licensing

    Hi Adobe,
    I am wondering if Adobe Volume Licensing could list the number of licenses we have actually downloaded? Our Licensing website shows the number of licenses we have purchased but does not give a record of how many we have downloaded and are actually using. I spoke with a support representative name Garima at 800-443-8158, case #209718922 and she confirmed that Adobe DOES track this information, but does not release it to customers under any circumstances. This may be a legal issue that Adobe will not compromise on, but I believe it would be helpful for good faith customers to be able to reconcile their accounting of downloaded licenses with Adobe's records. That way, the customer can make maximum use of the software they have spent so much money on, but also stay within Adobe's licensing agreement terms without accidentally mis-accounting and going over.
    Thanks,
    Grant Sheehan
    [personal information removed by host]

    Grant,
    I would think that Adobe Customer Support could tell you which licensed products you have, that are Activated (effectively using the license). If they cannot, I would hope that they can direct you to a source of that information.
    Good luck,
    Hunt

  • Sound keeps lowering itself (Z87-G41)

    So I bought a Z87-G41 motherboard and I've been experiencing something very annoying.
    I'll give you an example of what happens :
    1 - I play a game and I listen to music at the same time. Once the music starts, the sound of my game lowers itself by approximately 50%.
    2 - I'm on Teamspeak, I watch a Youtube video, everytime someone starts talking, the sound of my video lowers itself.
    3 - I watch a video, I listen to music at the same time ... my music is going to lower itself.
    It's sooooooooooooooo annoying. It's like there can't be two things playing at the same time. I've tried the basic stuff but I suspect it's Soundblaster Cinema that is messing everything's up. But if I choose to deactivate this feature/program, everything sounds like **** so I'm pretty much stuck with it.
    Is there any way I can fix that ?

    Are you using Windows 7 64bit SP1 ??? 
    I assume that you are using a big headphone to test?
    1 - I play a game and I listen to music at the same time. Once the music starts, the sound of my game lowers itself by approximately 50%.
    What kind of games are you playing??  from which player did you play music?? 
    3 - I watch a video, I listen to music at the same time ... my music is going to lower itself.
    Which kind of player are you using to watch video??  which player for music??
    I normally won't do 2 things at the same time but maybe I could try check it out..

  • Volume Lowering Automatically

    On some, but not all tracks, the music will start at a certain volume, then automatically drop quite a bit.  To listen at the volume I'd like, I have to raise the volume, but then the first few seconds before it automatically drops are really loud.  It happens with the built in speaker, over headphones, and over bluetooth, so it is not specific to how I play the tracks.  This is not new to the latest update; I've been having the issue for a while.  It does not affect the same tracks played on the desktop player, so I know it is not the content of the song.  Is anyone else having the same issue?  Has anyone found a solution?

    Have the same issue, happens after some time i didnt use the client.
    Typically only on the the first song i play.. after a short time the volume lowers and then after ~10 sec, it increases again to normal.
    It happens on all of my playlists. Somewhat like it has to cache something, and then it's ok.
    I have also see this in Offline mode on a mobile phone.
    This is anoying as hell.
     

  • Volume randomly lowers itself?

    Anyone else have this issue? No rhyme or reason to when it happens. Press and hold volume button and it goes up then back down. I've nicknamed it Christine after the posessed Plymouth Fury in the Steven King novel.

    There is a maximum volume limit in the iPod's settings.  This setting controls the highest volume at which the iPod will play.  Could this issue be related to that setting?

  • Volume too loud. Mixer always resets to 100%.

    Using:
    Windows 7 64bit.
    Firefox 19.0.2
    Flash Version 11,6,602,180
    My volume in flash defaults to almost horrifying levels. In the mixer I tone it down but every time I close firefox it resets itself back to 100%. When I go into flash settings there does not appear to be a volume slider anywhere. The only thing I can see is a mic slider.
    The easy answer would be to turn my system volume down but for my computers multiple uses it is impossible to find a "happy medium". Each of my programs has seperate settings except for Adobe Flash Player which I cannot seem to find or get to work in the mixer. Any help would be greatly appreciated

    Bump, still not fixed.
    Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=3590220

  • Need menu volume lowered relative to movie

    I have a DVD project in which the feature itself has relatively low volume. In iMovie I boosted the level the max (150%). How can I raise it further? Do I have to extract it and then import it into an audio engineering program? If so, should I use QuickTime Pro or Peak? I also have Final Cut Pro 3
    To lower the volume of the mp3s I use for menus, I'm wondering if I go back to iTunes and individually lower the volume in the get info options pane, will that lowering come through when I import the song into a menu of my project?
    Do any other iTunes processes, like Sound Check, or the Sound Enhancer? If I adjust the starting and stopping point in a track using the get info > options panel fields will that effect how the song comes into my iDVD menu?
    Thanks very much for your help!
    I'm running all of the iLife 5 applications, including iTunes 5.

    To lower the volume of the mp3s I use for menus
    You have to open these in a sound editing porgam. iMovie will do in a pinch, but you have to add some video (A Ken Burns clip will do). Lower the volume of the MP3, and then Share>Quicktime>Expert Settings>Sound to AIFF. Use the new AIFF with lower volume in your menu.
    John

Maybe you are looking for