Adobe Web Gallery- can't get more than 10 images to show up

I am trying to create a Web Gallery from within Bridge (CS4), but I'm not having any luck getting more than 10 images to show up when I create the Gallery, even though I'm selecting nearly 50 images (all in the same folder) that I'd like to be in the Gallery. Does anyone know if there's a limit to the number of images that can be used in an AWG? I can't seem to find ANY documentation that sheds light on that subject. All I know is that no matter WHAT I do, I can only get Bridge to create a Gallery with TEN images!! Very frustrating. Any help will be greatly appreciated.

Assuming the obvious that in Bridge content panel you have selected all the
files you want in the web galery
First try a purge cache for folder using the menu Tools/purge cache for
folder when having Bridge pointed to the problem folder.
Second try a reset preferences with option key while restarting Bridge.
I wish that were the case - it's only outputing up 10 images...

Similar Messages

How can I increase the number of sites shown in the location bar dropdown? No matter how much I go to a site, I can't get more than 5 to show.

I cleared all history. Now I am only able to get 5 sites in the location bar dropdown.

Increase or decrease '''browser.urlbar.maxRichResults''' using '''about:config'''
*http://www.mydigitallife.info/change-the-maximum-rich-url-listings-in-firefox-awesome-smart-location-bar/
*http://kb.mozillazine.org/About:config
NOTE: The FasterFox extension (at least older versions as of 2 months ago) can affect the number of items shown if you have it installed (Add-ons > Extensions).
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I get more than one firewre port ?

Hello,
how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
TIA

Hi ginestre-
Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
Luck-
-DP

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

I can't get more than 2 calendar events to post in the notification center even though I have 10 items checked in the settings area. Any advice?

I can't get more than 2 calendar events to post in the drop down notification center, even though I have 10 checked in the settings area. Any advice?

Same here. I've been searching for a solution but have found nothing.

How can a get more than 1 page on a greetings card in elements 11

How can a get more than 1 page on a greetings card in elements 11

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
See also:
* [[How do I use bookmarks?]]
* Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

Can not get more than one computer to access internet

using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
help - what should the settings be in airport and network preferences?

are using internet connection as dhcp?
Yes.
bridge mode seems to only work with pppoe connection to internet which is what my set up is
But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

Spry insert master/detail layout Can't get more than two columns?

Ive been trying to get more than two columns just experimenting with spry data sets and can't with the layout option "insert master/detail layout"
What am I doing wrong?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var ds1 = new Spry.Data.HTMLDataSet("benefitsdata.html", "bizben", {firstRowAsHeaders: false});
</script>
</head>
<body>
<div align="center">
<div class="MasterDetail">
    <div spry:region="ds1" class="MasterContainer">
      <div class="MasterColumn" spry:repeat="ds1" spry:setrow="ds1" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">{column0}</div>
    </div>
    <div spry:detailregion="ds1" class="DetailContainer">
      <div class="DetailColumn">{column1}</div>
      <div class="DetailColumn">{column2}</div>
      <div class="DetailColumn">{column3}</div>
    </div>
    <br style="clear:both" />
</div>
</div>
</body>
</html>

Hello,
in addition to Sudarshan's statement about the discontinued support: In my SPRY library I found this "html_dataset_sample". Maybe it could help you. Here the source code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<table>
<tr align="center" valign="middle">
   <th width="100" spry:sort="column0">Name</th>
    <th width="100" spry:sort="column1">Class</th>
   <th width="100" spry:sort="column2">Length(m)</th>
   <th width="100" spry:sort="column3">Crew Size</th>
   <th width="100" spry:sort="column4">Crew 1</th>
</tr>
<tr align="center" valign="middle" spry:repeat="ds1">
   <td width="100"><p>{column0.1}{column0.2}{column0.3}</td>
     <td width="100">{column1}</td>
   <td width="100">{column2}</td>
   <td width="100">{column3}</td>
   <td width="100">{column4}</td>
</tr>
</table>
</div>
</body>
</html>
Hans-Günter

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

I can't get more than one window of Firefox to open no matter what I try. Help!

I recently had a virus and had to do a system restore to about a month ago. After the restore everything worked okay, except for Firefox. Now I can't open more than one Firefox window at a time and the window that is open is having a bunch of problems (right clicking won't open things into tabs, the back button isn't working, etc.). I've tried uninstalling and reinstalling Firefox, but that did nothing.
== Yesterday

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can I get more than 5 items in my Recent Projects list?

After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
I run Adobe Production Premium CS6.

I see a lot of people not reading the circumstances of what I said.
I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
So navigating 'at a glance' through a file explorer isn't always the most practical.
In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
@Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
@anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
@Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
@MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
@Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
Thanks for your comments folks.

Can't get more than one month of backups with Time Machine

I seem to be having persistent problems with TM. I have a 1TB HD and in the past I have been able to get up to several months of backups from around 140GB with exclusions. However, lately I seem to be plagued with "SystemFlipper" messages that start a full backup and result in the removal of previous backup such that I seem unable get have more than just over one month of backups. This seem to occur mostly at the first backup of each day and then works fine for each subsequent hour after doing the "Full Reset" as per Pondini (http://pondini.org/TM/A4.html). Other days it seems to work fine.
I have been reviewing other related discussion in this forum and cannot seem to find an answer. It is possibly to do with residual pre-Intel programmes is the best I can determine, but the problem is how to find the culprits in my list of applications either remove them all together or transfer them to another HD I use for non-essential data and files. I have done this for a lot of other data and have added exclusions for some file that were giving me identified issues.
Would appreciate any suggestions as I'm getting a little frustrated at having to do a reset so often, and not being able have a greater time period of backups given that there was a time when I had nearly a year's worth.
Thanks, Dave

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can i get more than 1000 items in Custom List Displaying Items?

http://.....sites/_vti_bin/listdata.svc/AddressBook(List) allows 1000 items Only my AddressBook List, but i have more than 1000 items in my AddressBook list. I want to get items
from AddressBook list and bind in another place using Autocomplete method like this.
=======>>>>listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook.
and my coding in camel like below
protected void btnpopulatedetails_Click(object sender, EventArgs e)
SPSite objSite = SPContext.Current.Site;
SPWeb objWeb = objSite.OpenWeb();
objWeb.AllowUnsafeUpdates = true;
SPList list = objWeb.Lists["Address Book"];
SPQuery query = new SPQuery();
query.QueryThrottleMode = SPQueryThrottleOption.Override;
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + txtcustomer.Value + "</Value></Eq></Where>";
query.RowLimit = 500;
SPListItemCollection items = list.GetItems(query);
function fnCustomerSearchBind() {
if ($("input[id$='txtcustomer']").length != 0) {
var collcustomer = searchCustomers('', urlTo, fieldto);
$("input[id$='txtcustomer']").autocomplete({
source: collcustomer,
//maxLength:10,
select: function (event, ui) {
//debugger;
event.preventDefault();
$("input[id$='txtcustomer']").val(ui.item.value);
$("input[id$='btnpopulatedetails']").click();
return false;
minLength: 0,
function searchCustomers(value, listurl, fieldto) {
var collcus = new Array();
var custresults;
var url =listurl + "?$filter=startswith('" + fieldto + "','" + value + "')";
//debugger;
$.ajax({
cache: true,
type: "GET",
async:false,
dataType: "json",
url: url,
success: function (data) {
custresults = data.d.results;
//alert(listurl);
// alert(data.d.results);
for (var x = 0; x < custresults.length; x++) {
//alert(custresults[x]['To']);
collcustList.push(custresults[x]['To']);
//debugger;
//debugger;
return collcustList;
In my research listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook has 1000 items in 1st Page by default, So how to change 1st Page by default to All Pages through
code. I think you understand my environment by look above coding, if you don't I am using office 365 sandbox solution. One more thing i know through my research Pages can be change by using Ado.Net Data Service, i tried this one but this one support windows
server 2008 r2 only but i am using Windows Server 2012 r2. Please help me if you know the answer.

Hi,
Here is a blog would be helpful:
ADO.NET Data Services returns 1000 items
https://gilleslauwers.wordpress.com/2010/12/08/ado-net-data-services-returns-1000-items/
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

External MIDI device, can't get more than one sound, Logic Express 9 & Korg N364

Hi, I just beginning to use Logic. I trying to get Logic Express 9 to work with and use my Korg N364 keyboard/workstation as an external MIDI device. I can only get one sound at a time even though I create multiple tracks and assign different programs (or patches) to them.
Each time I do the following: I add a new external MIDI track, change the Channel to new number, put a check in the Program box ( as well as the Volume & Pan), and choose a instrument or patch from the Program drop down menu. What happens, though, it changes the sound to that instrument alright, but ALL THE PREVIOUS EXTERNAL MIDI TRACKS HAVE THE SAME SOUND NOW. I've followed the tutorials I found on the web and it seems like I'm doing everything correct in Logic. I hooked up the MIDI cables, added a new device and connected virtual cables in the MIDI studio window of my Mac OS, and have added the proper Korg multi instrument in the environment window of Logic and "un-slashed" the 16 channels. I get the sounds from the Korg no problem, it's just that I can only assign one sound and no more to the external MIDI tracks. Is there something in my Korg I need to do? Or am I missing something in Logic?

It's not Logic, it's how you have the Korg setup.
I'm not familiar with that model but it is a workstation so I'm pretty sure you can set it to a "Multi" mode.
Right now you are running it in single patch mode.
In single patch mode only one sound is available on a single MIDI channel, your Korg probably has a Multi or Combi mode, this is where multiple sounds can be played, each sound has to have it's own MIDI channel.
You will need to set this up on the Korg first.

Adobe Web Gallery- can't get more than 10 images to show up

Similar Messages

Maybe you are looking for