Adobe X doesn't print all files

Hi, I'm using Adobe X, XP Home, everything up to date.
Often I need to open or print more than 1 file at a time.
If I go to the directory, block off any number of pdf files and click on open, not all of the files will open. That was causing problems, but I discovered the trick there is to specify open with Adobe X and then they will all open.
If I block off any number of pdf files and click on print, again, not all of the files will print. Is there an option that allows me to batch print pdf files?
Hoping there is!
Thanks for any help, Tom

I'm guessing its a setting but can't seem to find that particular one. Has anyone ran into this? Any ideas?
While Bridge is not assigned for use over a network your problem seems cache related to me. When in a problem folder go to the menu tools / cache / and choose purge cache for folder and see if this helps you.

Similar Messages

Adobe Bridge Doesn't show all files in a folder

I am using a MacPro with 8GB of Ram and 1TB HD running Mountain Lion. I have a network folder that has about 320 GB of files in it. This is spread out between about 255 different Illustrator files. When I view them in Finder, all the files show up. When I view them in Bridge, I can only get 200 to show up. If I click refresh, it goes to a different number. If I repeat, it changes again. This worked on the old Machine but doesn't seem to work on the New one. I'm guessing its a setting but can't seem to find that particular one. Has anyone ran into this? Any ideas?
Thanks!

I'm guessing its a setting but can't seem to find that particular one. Has anyone ran into this? Any ideas?
While Bridge is not assigned for use over a network your problem seems cache related to me. When in a problem folder go to the menu tools / cache / and choose purge cache for folder and see if this helps you.

Printing all files in a portfolio

Discovered that, if you select the "List View" layout for a portfolio (running Acrobat 9.1.3 on Snow Leopard), you lose the print dialog box option for printing "All Files". Under the "Grid" layout, the "All Files" print option is restored. Pointed this out to tech support, but wanted to save others the headache.

Sharing a folder does give others access to it, but it does not change the permissions of the files inside. Other users can probably read everything, but they can't modify files that they do not own unless the owner of those files has changed the permissions to allow it, or other steps have been taken to provide additional access such as the use of an Access Control List (ACL).
Apple doesn't include a GUI utility for manipulating ACLs, so your choices are to use a third-party utility such as TinkerTool System (not free) or the Terminal application. The Drop Box folder in your user's Public folder has an ACL entry that gives access to change just about everything on files that are dropped there, so a Terminal example that sets similar permissions for everyone (a particular user group can also be used) would be:
1. copy and paste the folowing into the Terminal window (there is a trailing space):
chmod -R +a "everyone allow list,add_file,search,delete,add_subdirectory,delete_child,chown,file_inherit,directory_inherit"
2. drag the desired folder into the Terminal window (this copies the path)
3. press return
Note that ACL entries only work on items that have been created in the folder - not moved there - so you should use option drag to make a new copy in the shared folder.

Where do I find the Adobe pdf 9.0 printer description file and how do I install it?

Where do I find the Adobe pdf 9.0 printer description file and how do I install it? Operating system is Windows 7 and I have Adobe Creative Suite 5.5 installed. Adobe Acrobat X Pro just updated to version 10.1.8

Hi. Thanks for the replyl
I'm in prepress, working mainly with Quark XPress for advertising files and with Word, Photoshop, everything, for many years. My older computer is the workhorse with Quark 6.5 and CS4 and OSX 10.4.11. Everything is set up for me to produce PDF x1a files by printing .ps files from Quark and Word, and InDesign.
My newer computer, OSX 10.9.4, must now be used to a greater extent. So I have Quark 9 and 10 and now Creative Suite for the Cloud. But I don't have any Adobe PDF printer which I select when I print .ps files and place into my Distiller Watched Folder. I by pass selecting the Adobe PDF printer in Word and just print straight to .ps. The .ps file just sits in the Watched Folder and no longer flows into Distiller, processed and out. Is this the way of the future? I just want a smooth, fast flow for PDF's. I want them to be PDF x1a compliant for hi-quality printing.
Thought you might help to give me info as to how one uses Distiller (or not) with the new operating system and latest programs. Can't seem to find any info as of yet by searching the Adobe FAQ's and the Internet in general.
Thanks alot.
Larry Winer

Adobe Reader doesn't open .pdf files anymore. Error: 213:11.

Adobe Reader doesn't open .pdf files anymore. It's written Error: 213:11. Details: laptop with Windows XP, Adobe Reader X

Are these local or online documents? If online, in what browser? If local, does the documents folder and docs themselves have sufficient permissions?
Is there anything else beside the number 213:11?

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

HP C3183 Doesn't Print Big Files

I've bought new computer with Windows 7, installed HP software and drivers from official web site. The problem is the device doesn't print big files, only very small files, approx 5kb. When I'm trying to print file larger then 5 kb, it simply doesn't do anything with files collected in print queue. I' ve tried to reinstall drivers several times, but with the same result. Did anybody have this kind of problem? Maybe there is a problem with printer internal memory?

Hello and thank you for your updated information.
I understand when you turn off your computer, you are unable to print. You shouldn't have to restart the Print Spooler everytime in order to print. You may have a problem with the Print Spooler on your computer. Please follow these steps:
First, I would recommend bypassing the Print Spooler to verify if you are able to print:
1) Go into Devices and Printers
2) Next, right click on the Photosmart C3183 printer
4) Click on Printer Properties, then click on the Advance Tab (very top)
5) Click on "Print Directly to the printer", then click Apply.
6) Try to print a document
If this step doesn't work, then follow this entire document on Print Spooler Keeps stopping Automatically. I know you are not receiving this error code, but it has valid troubleshooting steps to perform. Make sure the "Startup Type" is set to Automatic.
Also, try this tool from Microsoft here, which will diagnose and fix printing problems.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

InDesign won't print all files in "Book" to PDF

I have 69 .indd files created in CS5 (ver7) that are part of a "book". I have been trying to "print" this book to PDF so I can submit a single PDF to the commercial printer. I do this all the time and have never had problems like this, but this is a new publication.
Here is what happens: I select all the files defined in the book, then click on the "Print the book" icon. After InDesign gathers all the document information, I select my Print Preset, with "Adobe PDF" as the printer, then print. After processing a few moments, I save the file, and InDesign/Acrobat starts processing the PDF. The complete book is 542 pages, but the PDF file pops up as completed with only about 38 pages processed; in the meantime, InDesign/Acrobat is still processing the files, but results in no new PDF file created.
I have rebooted and the problem has persisted.
In addition to this, another problem has cropped up and I wonder if it is somehow related. Parts of a master page (page heading) mysteriously appear on a page defined by another master page. There is no way to delete this unwanted heading, even if I "Override All Master Page Items".
Any help is appreciated.

I would recommend exporting the book to PDF rather than printing to PDF....
Master objects from a different master might be appearing if they are on the other half of a master spread that is applied to the other half of the document spread and they touch that side of the master as well as being on the half not in use. Check the master in questina and be sure that the objec is not crossing the gutter.

Brother HL-2030,USB doesn't print PDF files

Mac OS 10.6.7. Brother HL-2030, USB connection, doesn't print any kin of PDF files, or prints with fatal errors. Printer driver Brother HL-2030 series CUPS. Adobe Reader 10.0.3. . A HP Deskjet printer, with the same connection, prints correctly. I did reinstall the system and updated it. Can you help me to fix this problem?

Are you sure that model number is correct?
Brother is not showing it on their support web site, but they show a firmware update and a software update from earlier this year for a similarly numbered model:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html ?reg=us&c=us&lang=en&prod=hl2230_us&dlid=&flang=English&os=94&type2=-1

Snow Leopard finder doesn't list all files on Windows 7 volumes

From my Macbook Pro (10.6.8), I can connect to my Mac Pro, while it is running Windows 7 in Boot Camp, in order to access the Mac Pro's 6 volumes (1 Boot Camp, 5 Mac volumes). This is using SMB via Finder's 'Connect to server…' on an Airport network.
However, Finder never displays all the files and folders on any of the Mac volumes it connects to through Windows 7. It seems to show approximately the first 18-9 files and folders, and then nothing. The same applies when I open a nested folder — it doesn't list all of its contents.
Any ideas as to what's causing this and how I can fix it? I have searched all over but can't find any answers yet, so I'm hoping someone here has seen this before.

Thanks for the reply, but I do have the Restore Windows box checked (see below). And the Resume features info (cnet link) only addresses how to turn the feature off, either selectively or globally. I'm simply looking for the functionality that I had with Snow Leopard and now seems to be absent. Maybe it's a bug in my Finder.

Finder doesn't show all files

When I add new photos to iPhoto, they do not appear as a file or item in Finder Documents list. I thought Finder was supposed to show all files and items that you create?

santra, use EasyFind or Find File instead. BY default, Apple's own Finder/spotlight doesn't search everywhere and doesn't find everything (Mac fanboys will tell you this is a feature and is so intelligent that some people can't understand how smart it is; I prefer to think of it as a defect).
Easyfind is here: http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Find File is here: http://www.versiontracker.com/dyn/moreinfo/macosx/10906315
I hope this helps you to find all your stuff.

Manual tile with bleeds doesn't print all crop marks

When I try to print out a manually-tiled print with bleeds, the top of the page doesn't print a bleed and not all the crops print. How do I resolve this?
Michael

Were the crop marks printing on all four corners BEFORE you added "Include Slug Area"? In addition to adding the slug area in the print dialog, did you change the Slug Area values in the Document Set Up? Now that it works, is the printing scaled to a smaller size than before?
Trying to understand why that worked.
Thanks,
Al

Printing doesn't print all pages

I am running FF 8.01 with a Canon MG6220 printer. When I try to print pages it only (even in the preview) only prints one page and cuts off the bottom of the first page as well. All prints correctly in IE.

I get around problems like that with web pages that don't show completely in Print Preview ''(especially those pages that are providing a receipt for a transaction, which are basically a one time access or view, or a statement of my account which I really don't need on paper - just save them to disk in one file)'' by saving the page as an MHT file using the UnMHT addon for Firefox. If I want a printed copy immediately, I open a new tab and use File > Open File... to open that just saved MHT in a new tab. Then I print it from that MHT file. I have never had a problem with a saved MHT file web page not printing all pages completely. <br />
https://addons.mozilla.org/en-US/firefox/addon/unmht/
There's a number of printing Bugs that might cause that. iFrames and Divs that extend beyond the first printed page can cause pages 2 and beyond to not appear in Print Preview and to not be printed, and is probably the most common cause of that problem. Those two issues / Bugs have been around for as long as Firefox has existed ''(Sept 2002 with Phoenix 0.1)''; one Bug was filed on Netscape and the other on the Mozilla Suite. Both can be rectified fairly easily with web page media = print CSS code; if the website provided proper support for Firefox they could probably fix it in a few minutes. But, hey, after 10 years of providing specific patch code for IE 5, 5.5, and 6.0 for stuff that didn't meet W3C coding standards and to make their pages work in IE, they're probably out of practice testing their stuff with the 3 or 4 most popular browsers and providing a minor tweak here and there. Either that or the developers who did the testing and patches were "retired" because they were being paid more then a banana or two for their skills.
I have given up hope that Mozilla will ever fix all these printing related problems, and I am afraid that they will screw things up even worse if they do try to fix something. Like this regression - https://bugzilla.mozilla.org/show_bug.cgi?id=454532 - after the developers messed with printing for the Firefox 3.0 version; the Bug was filed 3 years ago and it still isn't completely fixed. Partial fix in 8.0, more promised in 9.0, and maybe completely fixed in 10.0??

Finder copy doesn't copy all files

I have a dedicated disk for my Aperture masters, and to back this up while also defragging (according to a method described by Kevin J Doyle and Matthew Bergsma on the Aperture forum) I'm simply doing a Finder copy of the masters. I may have made a mistake when I relocated my masters a few months ago, because I put all 40,000 files in a single directory, at the "root" level of the drive.
I've searched around to see if there is a limit to the number of items in a single directory, and saw guesses but nothing definitive.
The problem is that when I try to copy the files, the Finder shows all 40,000 selected, but only copies 10,000 or so. I can't figure out why. If needed I can relocate the masters again into project folders, but I'm very curious why I'm seeing the partial copy.
Rob

I've got the same problem when copying multiple large files from the desktop to a network drive on Windows Home Server (using drag/drop). The files are about 1gb each, and if I copy more than one at a time, at least one will dissapear on the target machine. This is VERY repeatable.
When I watch it closely, I can see temporary files for all files appear, and the number of items, and the total size reported in the copy status on the Mac are correct. In fact, it takes about the correct amount of time for the total size copied. However, when the copy is complete, some of the files on the target drive vanish. There is no error dialog, files just go poof. Dragging the missing files again works, as long as no more than one is copied at a time.
A test with a few small files works fine. This only fails with large files. The total copied is less than 2gb, so this doesn't seem to be a FAT32 problem. There is ample space on the destination drive (over 1Tb free). The Mac is on a wireless 802.11N lan.
- Bruce

Jar -xvf file.war doesn't overwrite all files.

Has anyone else experienced the case when a WAR file created using Netbeans is extracted (jar -xvf file.war) doesn't overwrite all the existing files in the directory with the files contained in the WAR?

Looks like it doesn't always do it or I extracted the war file in another directory and then issued the mv command to move the tree thinking it would replace all files.

Adobe X doesn't print all files

Similar Messages

Maybe you are looking for